GOST R 55472-2019
ГОСТ Р 55472-2019
|
|
Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
Системы газораспределительные. Сети газораспределения природного газа. Часть 0. Общие положения
Status: The document is enacted from 01.09.2019. Registration information 120-st dated 04/04/2019 (Rosstandart official website) 09/01/2019
The standard applies to the design, construction, reconstruction and operation of gas distribution networks transporting natural gas in accordance with GOST 5542.
Стандарт распространяется на проектирование, строительство, реконструкцию и эксплуатацию сетей газораспределения, транспортирующих природный газ по ГОСТ 5542.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/4/2019
SKU: RUSS373875
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.040 Gas and steam turbines. Steam engines »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.040 Gas and steam turbines. Steam engines »
As a Replacement Of:
GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Federal Law 7-FZ: Environmental Protection
GOST 10007-80: Polytetrafluoroethylene. Specifications
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 12.0.004-2015: Occupational safety standards system. Organization of training for labor safety. General principles
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions
GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17376-2001: Carbon and low-alloy steel butt-welding fittings. Tees. Design
GOST 17378-2001: Carbon and low-alloy steel butt-welding fittings. Reducers. Design
GOST 17379-2001: Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17711-80: Cast copper-zinc alloys (brass)
GOST 19281-2014: High strength rolled steel. General specification
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST 25100-2011: Soils. Classification
GOST 26358-84: Pig iron castings
GOST 27.002-2015: Dependability in technics. Terms and definitions
GOST 28394-89: Vermicular graphite iron for castings grades
GOST 30319.2-2015: Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
GOST 30319.3-2015: Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on component composition
GOST 30753-2001: Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33979-2016: Gas distribution systems. Management systems of gas distribution network
GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making
GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development
GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making
GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST 380-2005: Common quality carbon steel. Grades
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4666-2015: Pipeline accessories. Requirements for marking
GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications
GOST 5152-84: Gland Packing Specifications
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications
GOST 613-79: Tin foundry bronzes. Grades
GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7338-90: Rubber and rubber-fabric sheets. Specifications
GOST 8295-73: Graphite of lubricants. Specifications
GOST 8965-75: Connecting parts made of steel, with parallel thread, for pipelines of pressure p = 1.6 мpа
GOST 8966-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Straight sockets. Basic dimensions
GOST 8967-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Nipples. Basic dimensions
GOST 8968-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Lock-nuts. Basic dimensions
GOST 8969-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Adapter couplings. Basic dimensions
GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements
GOST R 15.301-2016: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 21.1003-2009: System of design documents for construction. Registration and storage rules design documentation
GOST R 21.1101-2013: System of design documents for construction. Main requirements for design and working documents
GOST R 51872-2019: Geodetic Executive Documentation. Execution Rules
GOST R 53865-2010: Gas distribution systems. Terms and definitions
GOST R 54934-2012: Occupational health and safety management systems. Requirements
GOST R 54983-2012: Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines
GOST R 56019-2014: Gas distribution systems. Gas pressure regulating stations. Functional requirements
GOST R 56290-2014: Gas distribution systems. Requirements to gas distribution networks. Part 3. Renovation
GOST R 57375-2016: Gas distribution systems. Gas distribution networks. Service life assessment in design of technological devices
GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
GOST R 8.741-2011: State system for ensuring the uniformity of measurements. Volume of natural gaz. General requirements for measurement procedure
GOST R IEC 870-1-1-93: Telecontrol equipment and systems. Part 1. General considerations. Section One - General principles
GOST R ISO 14001-2016: Environmental management systems. Requirements with guidance for use
Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate
Order 542: On approval of standard lease agreements for forest areas
Order 542: Federal norms and rules in the field of industrial safety "Safety rules for gas distribution and gas consumption networks"
RD 03-19-2007: Regulations on the organization of work on the training and certification of specialists of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision
Resolution 145: Regulations on the organization and conduct of state expertise of project documentation and engineering survey results
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications
SP 11-110-99: Code of standards on design and construction Designer’s supervision over construction of building and facilities
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 119.13330.2012: Railways of 1520 mm
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils
SP 22.13330.2016: Soil bases of buildings and structures
SP 227.1326000.2014: Intersection of railway lines with transport lines and engineering networks
SP 246.1325800.2016: Code practice. Regulation on the supervision of authors for construction of buildings and structures
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 33.13330.2012: Steel pipelines strength analysis
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
SP 45.13330.2017: Earthworks, grounds and footings
SP 47.13330.2016: Engineering survey for construction. Basic principles
SP 48.13330.2011: Organization of construction
SP 62.13330.2011: Gas distribution systems
SP 68.13330.2017: Acceptance into operation completed construction objects. Basic provisions
SP 77.13330.2016: Systems of automation.
SP 86.13330.2014: Main (Trunk) pipelines
The Document is Referenced By:
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.