SP 429.1325800.2018
СП 429.1325800.2018
|
|
Enclosing constructions with effective insulation and sheet cladding. Design rules
Конструкции ограждающие с эффективным утеплителем и тонколистовыми облицовками. Правила проектирования
Status: Effective - Introduced for the first time
The set of rules applies to the design and calculation of frame and two-layer building envelopes with an effective heater of industrial and public buildings. Enclosing structures with phenolic foam insulation are used only in industrial buildings. When using structures with foam insulation, the surface temperature of metal cladding facing the inside of the premises should not be more than 30 degrees Celsius. Relative indoor humidity should not exceed 70 percent
Свод правил распространяется на проектирование и расчет каркасных и двухслойных ограждающих конструкций с эффективным утеплителем производственных и общественных зданий. Ограждающие конструкции с утеплителем из фенольного пенопласта п��именяются только в производственных зданиях. При использовании конструкций с утеплителем из пенопласта температура поверхности металлических облицовок, обращенных внутрь помещений, не должна быть более 30 градусов Цельсия. Относительная влажность воздуха внутри помещений не должна быть более 70 процентов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/25/2018
SKU: RUSS373906
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.99 Other building structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.99 Other building structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10499-95: Heat insulating products made of glass staples fibre. Technical requirements
GOST 11539-2014: Bakelized plywood. Specifications
GOST 18124-2012: Chrysotile cement sheets are flat. Technical conditions
GOST 20916-87: Foam plastic heat-insulating slabs based on resol phenol-formaldehyde resins. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21880-2011: Thermoinsulating mineral wool broached mats. Specifications
GOST 2228-81: Paper for bags
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 30547-97: Roofing and hydraulic insulating materials in rolls General specifications
GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications
GOST 32805-2014: Flexible rolled roofing bitumen-based materials. General specifications
GOST 33344-2015: Constructive pultruded profiles from polymer composites. General specifications
GOST 34180-2017: Steel cold and cold rolled hot-galvanized sheet with polimer coating, prepainted by the continuous coil-coating process. Specifications
GOST 4598-86: Fibre boards. Specifications
GOST 4640-2011: Mineral wool. Specifications
GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications
GOST R 56076-2014: Building structures. Construction from double skin metal faced insulating panels. Fire resistance and fire hazard test method
GOST R 56590-2016: Polyisocyanurate foam based thermal and sound insulation slabs. Specification
Manual for SP 63.13330.2012: Manual for the calculation of concrete and reinforced concrete structures on a computer
Order 862/pr: On the approval of the set of rules "Fencing structures with effective insulation and thin-sheet cladding. Design rules"
SNiP 12-03-2001: Labor safety in construction industry
SNiP 3.05.03-85: Heat networks
SNiP 3.05.05-84: Processing equipment and process pipelines
SP 128.13330.2016: Aluminium structures
SP 16.13330.2017: Steel structures
SP 20.13330.2016: Loads and actions
SP 28.13330.2017: Protection against corrosion of construction
SP 64.13330.2017: Timber structures
Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement
The Document is Referenced By:
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 862/pr: On the approval of the set of rules "Fencing structures with effective insulation and thin-sheet cladding. Design rules"
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.