SP 434.1325800.2018

СП 434.1325800.2018

Polystyrene concrete enclosures. Design rules

Конструкции ограждающие из полистиролбетона. Правила проектирования

Status: Effective - Introduced for the first time

The set of rules applies to the building envelope made of polystyrene concrete for buildings and establishes the requirements for their design, construction and calculation. The set of rules is used in the design of building envelopes for buildings for various purposes, including residential and public. The set of rules also establishes requirements for an energy-efficient building system of building envelopes using products made of especially lightweight polystyrene concrete.

Свод правил распространяется на ограждающие конструкции из полистиролбетона для зданий и устанавливает требования к их проектированию, конструированию и расчету. Свод правил применяют при проектировании ограждающих конструкций зданий различного назначения, в т.ч. жилых и общественных. В своде правил установлены также требования к энергосберегающей строительной системе ограждающих конструкций с использованием изделий из особо легкого полистиролбетона.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 11/9/2018

SKU: RUSS373911

Price: $1,702.00


The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.01 Engineering equipment of buildings in general »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.01 Engineering equipment of buildings in general »

The Document References:

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

Federal Law 7-FZ: Environmental Protection

Federal Law 96-FZ: Atmospheric Protection

GN Maximum allowable concentrations (MACs) of pollutants in the air of residential areas

GN Maximum allowable concentrations (MACs) of harmful substances in occupational air

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.

GOST 22950-95: Mineral wool slabs of higher rigidity on synthetic bond. Specifications

GOST 28013-98: Mortars. General specifications

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 30494-2011: Residential and public buildings. Microclimate parameters for indoor enclosures

GOST 30971-2012: Erection to joints of window assemblies adjoined to wall openings. General specifications

GOST 31359-2007: Cellular autoclave curing concretes. Specifications

GOST 33929-2016: Concrete with polysterene aggregates. Specifications

GOST 3826-82: Wire cloth nets with square mesh. Specifications

GOST 4640-2011: Mineral wool. Specifications

GOST 530-2012: Ceramic brick and stone. General specifications

GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications

GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications

GOST R 51829-2001: Gypsum fibre sheets. Specifications

GOST R 52749-2007: Assembly window joints with vapour-permeable and self-expanding tapes. Specifications

GOST R 53338-2009: Vapour-permeable self-expanding and self-adhesive tapes for building application. Specifications

GOST R 56707-2015: Facade’s thermo insulation composite systems with external mortar layers. General specifications

SanPiN Polymer and polymer containing construction. Materials. Products and structures. Hygienic requirements

SanPiN Norms of radiation safety

SP 131.13330.2012: Building climatology

SP 131.13330.2018: Construction Climatology

SP 15.13330.2012: Masonry and reinforced masonry structures

SP 16.13330.2017: Steel structures

SP 17.13330.2011: Roofs

SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)

SP 20.13330.2016: Loads and actions

SP 23-101-2004: Design of thermal protection of buildings

SP 23-103-2003: Designing acoustic walling for residential and public buildings

SP 28.13330.2017: Protection against corrosion of construction

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 51.13330.2011: Noise protection and rooms acoustics.

SP 54.13330.2016: Multicompartment residential buildings

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.

SP 96.13330.2016: Ferrocement structures

The Document is Referenced By:

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
Sponge titanium. Specifications
Language: English
Price: $79.00
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
Loads and impacts
Language: English
Price: $306.00
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00

YOUR ORDERING MADE EASY! is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!