GOST 34519-2019
ГОСТ 34519-2019
|
|
Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
Трубы промышленные дымовые и вентиляционные. Правила организации и производства работ, контроль выполнения и требования к результатам работ
Status: Effective - Introduced for the first time
The requirements of the standard apply to the construction of industrial chimneys and ventilation pipes (hereinafter pipes) of various materials: - brick; - reinforced concrete monolithic; - reinforced concrete prefabricated; - metal; - pipes made of composite materials; - combined. The standard establishes the rules for organizing, performing work, monitoring the implementation and requirements for the results of the construction, reconstruction and overhaul of industrial chimneys and ventilation pipes. The requirements of the standard do not apply to the construction of chimneys and ventilation pipes with a height of less than 15 m.
Требования стандарта распространяются на сооружение промышленных дымовых и вентиляционных труб (далее труб) из различных материалов: - кирпичные; - железобетонные монолитные; - железобетонные сборные; - металлические; - трубы из композитных материалов; - комбинированные. Стандарт устанавливает правила организации, производства работ, контроль выполнения и требования к результатам работ по строительству, реконструкции и капитальному ремонту промышленных дымовых и вентиляционных труб. Требования стандарта не распространяются на сооружение дымовых и вентиляционных труб высотой менее 15 м.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/19/2019
SKU: RUSS373951
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
91.200.01 Construction technology in general »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
91.200.01 Construction technology in general »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 10528-90: Geodetic levels
GOST 10529-96: General specifications
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 11371-78: Washers. Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 17624-2012: Concrete. Ultrasonic method of strength determination
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 20910-90: Refractory concretes. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 21830-76: Geodetic instruments. Terms and definitions
GOST 22266-2013: Sulphate-resistant cements. Specifications
GOST 22551-77: Quartz sand, ground sandstone, quartzite and vinyl quartz for glass industry. Specifications
GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 28013-98: Mortars. General specifications
GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing
GOST 32484.1-2013: High-strength structural bolting assemblies for preloading. General requirements
GOST 33530-2015: Assembly tools for standardized tightening of threaded connections. Torque wrenches. Basic specifications
GOST 390-96: Fireclay and semiacidic refractory articles general-purpose and mass production. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 474-90: Acid-proof brick. Specifications
GOST 530-2012: Ceramic brick and stone. General specifications
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6402-70: Lock washers. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8736-2014: Sand for construction works. Specifications
GOST 9179-77: Lime for building purposes. Specifications
GOST 9416-83: Building levels. Technical requirements
GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C
Order 119: The procedure for carrying out weight and dimensional control of vehicles, including the procedure for organizing points of weight and dimensional control of vehicles
Order 119: Federal Aviation Rules "Placement of markings and devices on buildings, structures, communication lines, power lines, radio equipment and other objects installed to ensure the safety of aircraft flights"
RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections
RD 11-05-2007: Instruction On Keeping Construction Log Book
RD 153-34.0-20.525-00: Methodical guidelines for monitoring grounding of electrical installations
SP 126.13330.2012: Survey operations in construction
SP 16.13330.2011: Steel structures
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 48.13330.2011: Organization of construction
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 71.13330.2017: Insulation and finish coatings
SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.