GOST 28570-2019
ГОСТ 28570-2019
|
|
Concrete Methods for determining the strength of samples taken from structures
Бетоны. Методы определения прочности по образцам, отобранным из конструкций
Status: The document is enacted from 01.09.2019. Registration information 172-st dated 04/26/2019 (Rosstandart official website) 09/01/2019
The standard applies to all types of concrete in accordance with GOST 25192 on inorganic binders and establishes methods for determining the strength of concrete in precast and monolithic concrete and reinforced concrete products and structures (hereinafter referred to as structures) for compression, axial tension, tensile stress during cracking and bending during destructive short-term static tests of samples made from drilled, cut or sawn from concrete samples, as well as sampling rules.
Стандарт распространяется на бетоны всех видов по ГОСТ 25192 на неорганических вяжущих и устанавливает методы определения прочности бетона в сборных и монолитных бетонных и железобетонных изделиях и конструкциях (далее — конструкций) на сжатие, осевое растяжение, растяжение при раскалывании и изгибе при разрушающих кратковременных статических испытаниях образцов, изготовленных из выбуренных, вырубленных или выпиленных из конструкций проб бетона, а также правила отбора проб.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/26/2019
SKU: RUSS373969
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
As a Replacement Of:
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 127.1-93: Commercial sulfur
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 17624-2012: Concrete. Ultrasonic method of strength determination
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST 25192-2012: Concretes. Classification and general technical requirements
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 31108-2016: General structural Portland clinker cements. Specifications
GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 9077-82: Ground pulverized quartz. General specifications
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Letter 78-OG/03: About the presence of a typo in GOST 28570-2019
PR 50.2.104-09: State system for ensuring uniformity of measurements. Procedure for testing standard samples or measuring instruments for type approval
PR 50.2.105-09: Procedure for approving the type of reference standards or reference measuring instruments
PR 50.2.106-09: State system for ensuring uniformity of measurements. The procedure for issuing certificates of approval of the type of reference materials or the type of measuring instruments, the establishment and change of the validity of these certificates and the interval between inspections of measuring instruments
PR 50.2.107-09: State system for ensuring uniformity of measurements. Requirements for approval marks of the type of reference materials or the type of measuring instruments and the procedure for their application
The Document is Referenced By:
GOST 13087-2018: Concrete Abrasion Determination Methods
GOST 25214-2021: Dense silicate concrete. Technical specifications
GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements
GOST R 58387-2019: Glue anchors for fastening in concrete. Test methods
GOST R 58895-2020: Concrete is chemically resistant. Specifications
GOST R 58949-2020: Building concretes and mortars. Methods for determination, rules for control and assessment of moisture in structures
GOST R 70222-2022: Heavy concretes. Technical conditions
GOST R 70307-2022: Fine-grained concretes and mortars for construction. Methods for determination of strength in thin-walled and thin-walled structures
GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements
GOST R 70522-2022: Cellular concrete small wall blocks. Technical specifications
GOST R 70566-2022: Land reclamation systems and structures. Rules of inspection and monitoring of technical condition
GOST R 70695-2023: Soils fixed by injection mortars based on cement and sodium silicate. Test methods
GOST R 71566-2024: Concretes. Determination of strength by depth of dowel nail immersion
Letter 24855/05-AS: About the application of the standards
Letter 78-OG/03: About the presence of a typo in GOST 28570-2019
Methodical recommendations 2-4-71-37-11: recommendations for the preparation of documentation for deregistration (type change) of civil defense protective structures
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
SP 474.1325800.2019: Metro Rules for the inspection and monitoring of building structures of underground structures
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
