TU 3680-001-04698606-04
ТУ 3680-001-04698606-04
|
|
Pipe Support
Опоры трубопроводов
Status: Effective - Supersedes. effectiveness is unlimited
Specifications apply to the supports of steel technological pipelines for various purposes with an outer diameter of 18 to 1620 mm, transporting a working medium with a temperature from 0 degrees to plus 450 degrees Celsius and pressure up to 10 MPa, at an ambient temperature of minus 70 degrees Celsius. Technical conditions establish the classification, basic parameters, dimensions, technical requirements, completeness, acceptance rules, test methods, labeling, packaging, transportation, storage requirements, installation instructions and manufacturer's warranty.
Технические условия распространяются на опоры стальных технологических трубопроводов различного назначения с наружным диаметром от 18 до 1620 мм, транспортирующих рабочую среду температурой от 0 градусов до плюс 450 градусов Цельсия и давлением до 10 МПа, при температуре окружающей среды до минус 70 градусов Цельсия. Технические условия устанавливают классификацию, основные параметры, размеры, технические требования, комплектность, правила приемки, методы испытаний, требования к маркировке, упаковке, транспортированию, хранению, указания по монтажу и гарантии изготовителя.
Choose Language:
Format: Electronic (pdf/doc)
Approved: CJSC UEMZ,
12/27/2004
SKU: RUSS374001
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Industry Standards and Specifications »
Technical conditions »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10198-78: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 103-76: Hot-rolled steel strip. Dimensions
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 14192-77: Marking of cargoes
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 1759-70: Bolts, screws, pins and nuts
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 2246-70: Welding steel wire. Specifications
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations
GOST 2590-88: Round steel bars. Dimensions
GOST 380-71: Common quality carbon steel. Grades
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4543-71: Structural alloyed steel
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 7502-80: Measuring metal tapes. Specifications
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 8050-85: Carbon dioxide,
GOST 8240-97: Hot-rolled steel channels. Assortment
GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions
GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions
GOST 8731-87: Seamless hot-rolled steel tubes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8773-73: Grease ЦИАТИМ-203. Specifications
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.401-79: Unified system of protection against corrosion. Coatings for paintwork intended for use in areas with tropical climate. General technical requirements and methods of accelerated testing
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
SNiP 2.03.11-85: Corrosion protection of buildings structures
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.