SP 441.1325800.2019
СП 441.1325800.2019
|
|
Protection of buildings against vibration generated by rail. Design rules
Защита зданий от вибрации, создаваемой железнодорожным транспортом. Правила проектирования
Status: Effective - Introduced for the first time
The set of rules applies to protection against vibration and structural noise created by rolling stock of railway transport in the premises of residential and public buildings located near the 1520 mm gauge railway lines designed to pass passenger trains at speeds up to 250 km
Свод правил распространяется на защиту от вибрации и структурного шума, создаваемых подвижным составом железнодорожного транспорта в помещениях жилых и общественных зданий, расположенных вблизи железнодорожных линий колеи 1520 мм, предназначенных для пропуска пассажирских поездов со скоростью до 250 км/ч включительно и грузовых поездов со скоростью до 140 км/ч включительно с вагонами, имеющими статические и динамические осевые нагрузки, а также температурный диапазон эксплуатации по СП 119.13330.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
1/22/2019
SKU: RUSS374012
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.25 Seismic and Vibration Protection »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.25 Seismic and vibration protection »
The Document References:
Federal Law 184-FZ: About technical regulation
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
GOST 11722-78: Cellular rubber. Method for determination of compression set
GOST 12248-2010: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 17168-82: Octave and one-third-of-octave electronic filters
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 17187-2010: Noise meters Part 1 Technical requirements
GOST 18268-2017: Plastics cellular elastic. Method for determining relative residual strain in compression
GOST 24346-80: Vibration. Terms and definitions
GOST 25100-2011: Soils. Classification
GOST 27242-87: Vibration. Vibration isolators. General test requirements
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 31185-2002: Vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
GOST 31191.1-2004: Vibration and shock. Measurement and evaluation of human exposure to whole-body vibration. Part 1. General requirеments
GOST 31191.2-2004: Vibration and shock. Measurument and evaluation of human exposure to whole-body vibration. Part 2. Vibration in buildings
GOST 31319-2006: Vibration. Measurement and evaluation of human exposure to whole-body vibration. Practical guidance for measurement at the workplace
GOST 32192-2013: Dependability in railway mechanics. General concepts. Terms and definitions
GOST 34056-2017: Railway transport. Rolling stock. Terms and definitions
GOST 34100.1-2017: Uncertainty of measurement. Part 1. Introduction to guides on the expression of uncertainty in measurement
GOST 34100.3-2017: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation
GOST R 51685-2013: Railway rails. General specifications.
GOST R 52892-2007: Vibration and shock. Vibration of buildings. Measurement of vibration and evaluation of its effects on structure
GOST R 53963.1-2010: Mechanical vibration. Measurement of vibrations in buildings. Requirements for measuring instrumentation
GOST R 53964-2010: Mechanical vibration. Measurements of vibration in structures. Guidance on measurement methods
GOST R 55050-2012: Railway rolling stock. Permissible exposure norms to the railway track and test methods.
GOST R 55056-2012: Railway transport. Generals. Terms and definitions
GOST R 56353-2015: Soils. Laboratory methods for determination of soil dynamic properties
GOST R 56729-2015: Thermal insulating factory made polyethylene foam products for engineering equipment of buildings and industrial installations. General specifications
GOST R ISO 10137-2016: Bases for design of structures. Serviceability of buildings against vibrations
GOST R ISO 10846-1-2010: Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 1. General principles of measurements
GOST R ISO 14837-1-2007: Vibration. Ground-borne noise and vibration arising from rail systems. Part 1. General guidance
GOST R ISO 18437-1-2014: Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 1. General principles
GOST R ISO 2017-1-2011: Vibration and shock. Resilient mounting systems. Part 1. Technical information for the application of isolation systems
GOST R ISO 2017-2-2011: Mechanical vibration and shock. Resilient mounting systems. Part 2. Technical information for the application of vibration isolation associated with railway systems
GOST R ISO 2017-3-2016: Vibration and shock. Resilient mounting systems. Part 3. Technical information for application of vibration isolation to new buildings
GOST R ISO 2041-2012: Mechanical vibration, shock and condition monitoring. Terms and definitions
SanPiN 2.2.4.3359-16: Sanitary and epidemiological requirements for physical factors in the workplace
SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones
SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings
SP 119.13330.2017: Railways with 1520 mm track
SP 122.13330.2012: Railway and highway tunnels
SP 20.13330.2016: Loads and actions
SP 23-105-2004: Evaluation of vibration in the design, construction and operation of subway
SP 26.13330.2012: Foundations for machines with dynamic loads
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 271.1325800.2016: Noise reduction system of air heating, ventilating and air conditioning. Rules of design
SP 51.13330.2011: Noise protection and rooms acoustics.
The Document is Referenced By:
GOST R 59940-2021: Vibration isolation systems for buildings and structures. Test methods for vibration-damping materials.
GOST R 70049-2022: Compliance assessment. Sustainability requirements for high-speed rail infrastructure
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1135/pr: On approval of Amendment N 2 to SP 441.1325800.2019 "Protection of buildings from vibration generated by rail transport. Design Rules".
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 909/pr: On approval of the Plan for development and approval of sets of rules and actualization of previously approved sets of rules for 2022.
SP 122.13330.2012: Railway and highway tunnels
SP 122.13330.2023: Railroad and road tunnels
SP 465.132500.2019: Buildings and constructions. Subway vibration protection. Design rules
SP 465.1325800.2019: Buildings and constructions. Subway vibration protection. Design rules
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.