GOST R 58419-2019
ГОСТ Р 58419-2019
|
|
Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications
Аддитивные технологии. Изделия из титановых сплавов, изготовленные методом селективного электронно-лучевого сплавления. Общие технические условия
Status: The document is enacted from 01.10.2019. Registration information 223-st dated 05/28/2019 (Rosstandart official website) 10/01/2019
The standard applies to titanium alloy products made by the method of selective electron beam fusion and intended for use in aviation and rocket and space technology, shipbuilding, energy and other industries.
Стандарт распространяется на изделия из титановых сплавов, изготовленные методом селективного электронно-лучевого сплавления и предназначенные для использования в авиационной и ракетно-космической технике, судостроении, энергетической и других отраслях промышленности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/28/2019
SKU: RUSS374094
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
03 Sociology. Services. Organization of firms and their management. Administration. Transport »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.3 Non-ferrous and precious metals »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.110 Technical product documentation »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.110 Technical product documentation »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.10 Quality Management and Quality Assurance »
National standards »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.10 Quality Management and Quality Assurance »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.20 Certification of products and companies. Conformity assessment »
National standards »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.20 Certification of products and companies. Conformity assessment »
ISO classifier »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.50 Titanium and titanium alloys »
National standards »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.50 Titanium and titanium alloys »
The Document References:
GOST 10145-81: Metals. Stress-rupture test method
GOST 11150-84: Metals. Methods of tension tests at low temperatures
GOST 14019-2003: Metallic materials. Bend test method
GOST 14192-96: Cargo marking
GOST 1497-84: Metals. Methods of tension test
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 19863.10-91: Titanium alloys. Methods for the determination of tin
GOST 19863.11-91: Titanium alloys. Method for the determination of palladium
GOST 19863.12-91: Titanium alloys. Methods for the determination of chromium
GOST 19863.13-91: Titanium alloys. Methods for the determination of zirconium
GOST 19863.14-91: Titanium alloys. Methods for the determination of copper
GOST 19863.15-91: Titanium-nickel alloy. Method for the determination of titanium
GOST 19863.16-91: Titanium-nickel alloy. Method for the determination of nickel
GOST 19863.1-91: Titanium alloys. Methods for the determination of aluminium
GOST 19863.2-91: Titanium alloys. Methods for the determination of vanadium
GOST 19863.3-91: Titanium alloys. Method for the determination of chromium and vanadium
GOST 19863.4-91: Titanium alloys. Methods for the determination of tungsten
GOST 19863.5-91: Titanium alloys. Methods for the determination of iron
GOST 19863.6-91: Titanium alloys. Methods for the determination of silicon
GOST 19863.7-91: Titanium alloys. Methods for the determination of manganese
GOST 19863.8-91: Titanium alloys. Methods for the determination of molybdenum
GOST 19863.9-91: Titanium alloys. Methods for the determination of niobium
GOST 20018-74: Sintered hard metals. Determination of density
GOST 22706-77: Metals. Method for tension tests at the temperature - 100 up to - 269 °C
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23207-78: Fatigue strength. Terms, definitions and symbols
GOST 23902-79: Titanium alloys. Methods of spectral analysis
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis
GOST 24956-81: Titanium and titanium alloys. Method for the determination of hydrogen
GOST 25.502-79: Methods of mechanical testing of metals
GOST 25.503-97: Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 25142-82: Surface roughness. Terms and definitions
GOST 25947-83: Sintered hard metals. Method of determination of electric resistance
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications
GOST 3248-81: Metals. Creep test method
GOST 3565-80: Metals. Method for torsional test
GOST 5272-68: Corrosion of Metals. Terms
GOST 6130-71: Metals and method of determining their heat resistance
GOST 9.909-86: Unified system of corrosion and ageing protection. Metals, alloys, metal and non-metal inorganic coatings. Test methods at climatic test stations
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9450-76: Measurements microhardness by diamond instruments indentation
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9651-84: Metals. Methods of tension tests at elevated temperatures
GOST R 51780-2001: Non-destructive testing. Methods and means for leakage testing. Procedure and criteria of selection
GOST R 56474-2015: Space systems. Non-destructive testing of physics and mechanical properties of space technique's materials and coatings by dynamic indentation. General requirements
GOST R 57558-2017: Additive manufacturing. General principles. Part 1. Terms and definitions
GOST R 57586-2017: Products obtained by additive processes. General requirements
GOST R 57587-2017: Products obtained by additive processes. Methods of control and testing
GOST R 57894-2017: Equipment for electron beam processing. General requirements
GOST R 57911-2017: Additive manufacturing products. Terminology
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R 8.748-2011: State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method
GOST R ISO 6520-1-2012: Welding and allied process. Classification of geometric imperfections in metallic materials. Part 1. Fusion welding
Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate
The Document is Referenced By:
GOST R 59185-2020: Additive technologies. Products obtained by the method of selective laser alloying from a metal-powder composition of titanium alloy VT6. General technical requirements
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.