TSN 23-340-2003
ТСН 23-340-2003
|
|
Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. St. Petersburg
Энергетическая эффективность жилых и общественных зданий. Нормативы по энергопотреблению и теплозащите. г. Санкт-Петербург
Status: Not effective. 09/13/2012 approved; Updated version of TSN 23-340-2003 of St. Petersburg RMD 23-16-2012 of St. Petersburg "Recommendations for ensuring the energy efficiency of residential and public buildings"
Norms must be observed on the territory of St. Petersburg when designing new, reconstructed, overhaulable heated residential buildings (multi-apartment and single-family) and public buildings (pre-school, general education, medical institutions and clinics, educational, entertainment, trade, catering and consumer services administrative and sports), as well as other public buildings with a standardized temperature and relative humidity of the internal air .
Нормы должны соблюдаться на территории Санкт-Петербурга при проектировании новых, реконструируемых, капитально ремонтируемых отапливаемых жилых зданий (многоквартирных и одноквартирных) и зданий общественного назначения (дошкольных, общеобразовательных, лечебных учреждений и поликлиник, учебных, зрелищных, учреждений торговли, общественного питания и бытового обслуживания, административно-бытовых и спортивных), а также других зданий общественного назначения с нормируемой температурой и относительной влажностью внутреннего воздуха.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Administration of St. Petersburg,
6/30/2002
SKU: RUSS374411
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
Construction (Max) »
Regulations »
Regulatory documents of Russian Federation subjects »
Regulatory documents of St. Petersburg »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document References:
Federal Law 28-FZ: Civil Defense
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 23166-99: Windows. General specifications
GOST 23250-78: Building materials. Method of specific heat determination
GOST 24700-99: Windows of wood with glassing units. Specifications
GOST 24816-81: Building materials. Method of hygroscopic moisture determination
GOST 25380-82: Buildings and structures. Method of measuring density of heat flows passing through enclosure structures
GOST 25609-83: Soft and tile materials for floor covering. Procedure for determining the heat absorption value
GOST 25891-83: Buildings and structures. Methods of determination of air tightness of enclosing structures
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 26253-84: Buildings and structures. Method for determining the building structure ability to maintain a relatively constant temperature of its inside surface under cycling thermal influence
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe
GOST 30290-94: Building materials and products. Surface converter method of thermal conductivity determination
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 30674-99: Windows of polyvinylchloride profiles. Specifications
GOST 7025-91: Ceramic and calcium silicate bricks and stones. Methods for water absorption and density determination and frost resistance control
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
RDS 10-231-93*: GOST R. certification system. The main provisions of certification of products in construction
RDS 10-232-94: GOST R. certification system. Procedure for certification of products in construction
SanPiN 2.1.2.1002-00: Sanitation and Disease Control Requirements for Residential Occupancies and Spaces
SanPiN 2.1.2.1188-03: Swimming pools. Hygienic requirements for arrangement, operation and quality of water, quality control
SanPiN 2.1.3.1375-03: Hygienic requirements for placement, arrangement, equipment and operation of hospitals, maternity homes and other health facilities
SanPiN 2.2.1/2.1.1.1076-01: Hygienic requirements for sun effect and solar protection of domestic and public buildings and areas. Sanitary regulations and standards
SanPiN 2.2.2/2.4.1340-03: Hygienic requirements for personal electronic computers and work organization
SanPiN 2.4.2.1178-02: Hygienic requirements to training conditions in educational institutions
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 31-02-2001: Residental single-family houses
SP 12-101-98: Technical rules for manufacture of the outdoor thermal insulation of buildings with fine plaster on the insulant
SP 23-101-2000: Design of thermal performance of buildings
TSN 23-304-99: Energy Conservation in Buildings. Requirements for Thermal Insulation and Heat, Water, and Electricity Supply
TSN 23-309-2000: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Tver region
VSN 58-88(r): Ordinance for Rehabilitation, Renovation, and Technical Inspection of Residential Occupancies, Public Utility Facilities, and Facilities Used for Amusement, Entertainment, and Recreation
VSN 61-89: Exploration, design and construction of the railways in regions of the permafrost
VSN 61-89(r): Rehabilitation and Renovation of Residential Occupancies. Design Standards
The Document is Referenced By:
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RMD 52-02-2007 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part II
RMD 56-05-2008 Sankt-Peterburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing
TSN 13-302-2004: Repair and technical re-equipment of residential buildings of the first mass series in St. Petersburg
TSN 23-348-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Pskov region
TSN 23-355-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Kirov region
TSN 31-330-2005: Treatment and prevention institutions in St. Petersburg
TSN 31-332-2006: Residential and public high-rise buildings
|
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
