POT R M-003-97
ПОТ Р М-003-97
|
|
Intersectoral rules on labor protection when performing forging and pressing
Межотраслевые правила по охране труда при выполнении кузнечно-прессовых работ
Status: Effective
The rules establish safety requirements that must be taken into account in the design, operation of forging shops and sections, the development and implementation of technological processes. The rules are binding on federal executive bodies, executive bodies of constituent entities of the Russian Federation, local governments and organizations, regardless of legal forms of ownership and departmental subordination.
Правила устанавливают требования безопасности, подлежащие учету при проектировании, эксплуатации кузнечно-прессовых цехов и участков, разработке и выполнении технологических процессов. Правила обязательны для федеральных органов исполнительной власти, исполнительной власти субъектов Российской Федерации, органов местного самоуправления и организаций независимо от организационно-правовых форм и форм собственности и ведомственной подчиненности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Labor of Russia,
7/9/1997
SKU: RUSS374449
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents on labor protection »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
I Legal and organizational basis of labor protection »
3 Organization of labor protection at enterprise »
3.1 Development of rules and instructions on labor protection »
ISO classifier »
77 METALLURGY »
77.180 Equipment for metallurgical industry »
The Document References:
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.002-84: Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.009-76: Occupational safety standards system. Electrical safety. Terms and definitions
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.014-84: Working zone air
GOST 12.1.016-79: Work area air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.023-80: Noise. Determination methods of stationary machine noise characteristics values
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.1.050-86: Occupational safety standards system. Methods of noise measurement at work-places
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.10-87: Occupational safety standards system. Installations, generators and induction heaters for electrothermics, ultrasonic installations and generators. Safety requirements
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12.2.007.9-93: Electric heating equipment safety
GOST 12.2.017.1-89: Automated and semiautomatic forging and press machines
GOST 12.2.017.2-89: Hammers
GOST 12.2.017.3-90: Straightening machines
GOST 12.2.017.4-90: Cabinets for switchgear and control gear and unitized transformer substations
GOST 12.2.017-86: Occupational safety standards system. Forging and pressing equipment. General safety requirements
GOST 12.2.017-93: The forging and pressing equipment general safety requirements
GOST 12.2.022-80: Conveyers.
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction
GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements
GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.2.101-84: Pneumatic drives
GOST 12.2.109-89: Sheet presswork press tools
GOST 12.2.113-86: Crank presses
GOST 12.2.114-86: Screw presses
GOST 12.2.116-86: Three and four roll plate bending machines
GOST 12.2.117-88: Hydraulic presses
GOST 12.2.118-88: Shears
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.006-75: Occupational safety standards system. Operation of water supply and sewerage systems. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation
GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements
GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements
GOST 12.3.036-84: Occupational safety standards system. Flame machining of metals. Safety requirements
GOST 12.4.002-74: System of standards on safety engineering. Means for personal protection of hands from vibration. General technical specifications
GOST 12.4.010-75: Means of individual protection protective mittens
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.023-84: Protective face shields
GOST 12.4.024-76: Specific footwear for protection from vibration
GOST 12.4.026-76: Signal colors and safety signs
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 19822-88: Industrial container. Specifications
GOST 21546-88: Hammer dies for die forging
GOST 24940-96: Buildings and structures. Methods of measuring luminance
GOST 26887-86: Platforms and ladders for civil engineering work. Specifications
GOST 3.1120-83: Unified system of technological documentation. General rules for presentation of labour safety requirements in technological documentation
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.010-90: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 1. Television
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 2. Broadcasting
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 3. General safety requirements
SN 181-70: Design Guidelines for Color Finishing of the Interiors of Production Buildings of Industrial Facilities
SN 357-77: Design Guidelines for Industrial Electrical Equipment for Power and Illumination
SNiP 2.02.05-87: Foundations of dynamic load machines
SNiP 3.01.04-87: Project acceptance for operation after construction
The Document is Referenced By:
GOST R 58718-2019: Mining engineering. Flexible mine cables. Methods for checking the possibility of leading shutdown during crushing
POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars
POT R O-001-2002: Rules on labor protection for printing organizations
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.