Manual for SNiP 3.09.01-85
Пособие к СНиП 3.09.01-85
|
|
Manual for the heat treatment of precast concrete structures and products
Пособие по тепловой обработке сборных железобетонных конструкций и изделий
Status: Reference materials, MP, TPR
The manual applies to heliothermal treatment of concrete and reinforced concrete products of a solid section up to 300 mm thick from heavy concrete of grade M200 (compressive strength class B15) and higher, manufactured in open workshops and landfills, consisting in solar heating of freshly laid concrete of products coated with film-forming compositions, and subsequent thermos holding (method SGITIP).
Пособие распространяется на гелиотермообработку бетонных и железобетонных изделий сплошного сечения толщиной до 300 мм из тяжелого бетона марки М200 (класс по прочности на сжатие В15) и выше, изготавливаемых в условиях открытых цехов и полигонов, заключающуюся в гелиоразогреве свежеуложенного бетона изделий, покрытых пленкообразующими составами, и последующим им термосным выдерживанием (способ СГИТИП).
Choose Language:
Format: Electronic (pdf/doc)
Approved: NIIZHB Gosstroy of the USSR,
7/7/1986
SKU: RUSS374488
The Product is Contained in the Following Classifiers:
Construction (Max) »
Reference documents »
Reference guidelines to SNiP »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.14 Gas Safety Requirements »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
The Document References:
GOST 10060-87: Concretes. Methods of frost resistance determination
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10354-82: Polyethylene film Specifications
GOST 111-78: Window glass. Specification
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 18105-86: Concretes. Rules for the strength control
GOST 21880-86: Stitched mineral wool mats. Technical requirements
GOST 22266-76: Sulphate resisting cements. Specifications
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 24211-91: Concrete additives. General technical requirements
GOST 24866-89: Sealed insulating glass units
GOST 3044-84: Thermoelectric converters. Nominal static graduation tables
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8829-85: Prefabricated reinforced concrete structures and elements. Methods of testing and estimation of strength, rigidity and resistance to cracking
GOST 9573-82: Thermal insulating mates of mineral wool on synthetic binder. Specifications
ONTP 07-85: All-Union norms for the technological design of precast concrete enterprises
SN 202-81: Instructions on the composition, procedure for the development, coordination and approval of projects and estimates for the construction of enterprises, buildings and structures
SNiP 1.02.01-85: Instructions on the composition, procedure for the development, coordination and approval of design estimates for the construction of enterprises, buildings and structures
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SNiP 5.01.23-83: Standard cement consumption rates for the preparation of precast concrete and monolithic concrete, reinforced concrete products and structures
The Document is Referenced By:
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
