Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions
Методика расчета концентраций в атмосферном воздухе вредных веществ, содержащихся в выбросах предприятий
Status: Not effective - Not applicable. By order of the Ministry of Natural Resources of Russia No. 273 dated 06.06.2017
The norms establish the methodology for calculating the concentrations of harmful substances in the atmospheric air contained in the emissions of enterprises. The standards must be observed when designing enterprises, as well as when rationing the atmospheric emissions of reconstructed and existing enterprises. The norms are intended for calculating surface concentrations in a two-meter layer above the surface of the earth, as well as for the vertical distribution of concentrations. The degree of danger of atmospheric air pollution is characterized by the highest calculated concentration value corresponding to adverse weather conditions, including dangerous wind speed. The norms do not apply to the calculation of concentrations at long (over 100 km) distances from emission sources.
Нормы устанавливают методику расчета концентраций в атмосферном воздухе вредных веществ, содержащихся в выбросах предприятий. Нормы должны соблюдаться при проектировании предприятий, а также при нормировании выбросов в атмосферу реконструируемых и действующих предприятий. Нормы предназначены для расчета приземных концентраций в двухметровом слое над поверхностью земли, а также вертикального распределения концентраций. Степень опасности загрязнения атмосферного воздуха характеризуется наибольшим рассчитанным значением концентрации, соответствующим неблагоприятным метеорологическим условиям, в том числе опасной скорости ветра. Нормы не распространяются на расчет концентраций на дальних (более 100 км) расстояниях от источников выброса.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Goskomhydromet,
8/4/1986
SKU: RUSS374557
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of roads »
13. Ecological requirements and environmental protection in design and construction of roads »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Ministry of Environmental Protection and Natural Resources of Russian Federation »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
V Social Security »
1 Requirements of sanitary and epidemiological regulation »
1.1 General requirements of sanitary-epidemiological regulation »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.2 Rationing of pollutant emissions into air and harmful physical effects »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.1 Rationing of air quality and harmful physical effects »
1.2.1.3 Requirements for quality of atmospheric air of industrial facilities and industries »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.1 Rationing of air quality and harmful physical effects »
1.2.1.2 Requirements for air quality in populated areas »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
3 Workspace air »
3.1 Hygienic regulation of microclimate parameters and content of harmful substances in air of working area »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.01 Air quality in general »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.20 Ambient atmosphere »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.40 Emissions of stationary sources »
As a Replacement Of:
SN 369-74: Instructions on the calculation of the dispersion in the atmosphere of harmful substances contained in the emissions of enterprises
The Document References:
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
SN 245-71: Sanitary standards for the design of industrial enterprises
SN 369-74: Instructions on the calculation of the dispersion in the atmosphere of harmful substances contained in the emissions of enterprises
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP II-6-74: Loads and Impacts
The Document is Referenced By:
GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications
GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications
GOST 31824-2012: Fibrous mist eliminators. Types and main parameters. Safety requirements. Methods of testing
GOST 31829-2012: Ozonization equipment. Safety requirements
GOST 7409-2009: Freight cars. Requirements to paint coatings
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST R 51691-2000: Paint materials. Enamels. General specifications
GOST R 51693-2000: Anticorrosion primers. General specifications
GOST R 51706-2001: Ozonisation equipment. Safety requirements
GOST R 52491-2005: Coating materials, used in building. General specifications
GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction
GOST R 53491.1-2009: Pools. Treatment of water. Part 1. General requirements
GOST R 55978-2014: Space systems and station. General requirements for ecological safety. Recommendations for the development of tactical and technical requirements for ecological safety
GOST R 56165-2014: Air quality. Method of establishing allowable industrial emissions in compliance with environmental standards
GOST R 57817-2017: Underground gas storage. Design standards
GOST R 57955-2017: Buildings and facilities for oil and gas producing industries. Design standards
ITS 37-2017: Coal mining and preparation
ITS 7-2015: Lime production
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 2.07.01-89: Water and Sewerage Manual for Urban and Rural Settlements
Manual for SNiP 2.07.01-89: Power supply of settlements
Manual for SNiP 2.07.01-89: Heat and gas supply of settlements
Manual for SNiP 2.07.01-89: A guide for the design of urban (local) telephone networks and wired broadcast networks of urban and rural settlements. Dispatching engineering equipment systems
Manual for SP 11-101-95: Practical guide to SP 11-101-95 on the development of the section "Environmental Impact Assessment" when substantiating investments in the construction of enterprises, buildings and structures
MDS 11-16.2002: Guidelines for drafting an engineering plan for civil defense
MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer
MGSN 1.01-97: Part 1: Interim Urban Development Code of the City of Moscow
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MGSN 5.02-99: Design of Urban Bridge Structures
MR 1.2.0074-13: The use of indicators and criteria for violation of the biotransformation of benzene in the body of children for the tasks of hygienic assessments, sanitary-epidemiological investigations and examinations
MSN 40-01-2011: Internal heating, ventilation and air conditioning systems
MU 2.1.6.792-99: Selection of Base Indicators for Public Hygiene Monitoring (Atmosphere in Populated Areas). Procedural Guide
NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry
NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry
NTP-APK 1.10.04.001-00: Engineering Design Standards for Horse Raising Facilities
NTP-APK 1.10.04.003-03: Standards for technological design of equestrian complexes
NTP-APK 1.10.05.001-01: Engineering Design Standards for Poultry Raising Facilities
NTP-APK 1.10.07.003-02: Engineering Design Standards for Animal Artificial Insemination Stations
NTP-APK 1.10.09.002-04: Standards of technological design of complexes for the cultivation of champignons
NTP-APK 1.10.09.003-04: Norms of technological design of oyster mushroom growing complexes
NTP-APK 1.10.10.001-02: Engineering Design Standards for Grain Seed Companies and Small-Capacity Grain Processing Facilities
NTP-APK 1.10.16.002-03: Norms of technological design of agricultural enterprises for the production of animal feed
NTP-APK 1.20.02.001-04: Standards for technological design of small confectionery production enterprises
NTPD-90: Norms of technological design of diesel power plants
ODN 218.5.016-2002: Ecological Safety Indicators and Standards for Roads and Highways
ONTP 09-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Mechanical repair shops
ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)
ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops
OST 290.004-02: Rules of air division product production design.
OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval
PB 09-12-92: Rules on the flare system design and safe operation
PNST 187-2017: Best available techniques. Automatic systems for continuous control and metering of contaminants emissions from thermal electric power stations into air. General requirements
POT R M-002-97: Intersectoral rules on labor protection in foundry
R 52.04.835-2015: Method for calculating the cost of services for providing information on background concentrations of pollutants according to monitoring of air pollution
RD 03-129-96: Procedure for Development of a Safety Declaration for a Facility in the Russian Federation
RD 153-34.0-02.109-99: Recommendations for conducting an environmental audit in the power industry
RD 153-34.0-02.303-98: Instructions for regulation of emissions of air pollutants for thermal power plants and boilers.
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 39-0147098-005-88: Environmental Protection Regulations for the Production, Treatment, and Transportation of Crude Oil
RD 39-0148052-537-87: Model of a Working Design for Construction of Oil and Gas Wells
RD 39-133-94: Instructions for protecting the environment during onshore oil and gas well construction
RD 39-135-94: Norms for technological design of gas-processing plants
RD 51-1-96: Instruction on protection of environment during construction of onshore wells at fields containing multicomponent hydrocarbons, including hydrosulphuric hydrocarbons.
RD 52.04.306-92: Nature protection. Atmosphere. Guide for air pollution forecasting
RD 52.44.2-94: Comprehensive survey of environmental pollution of industrial areas with intensive anthropogenic load
RD-APK 1.10.01.02-10: Guidelines for technological design of farms and cattle complexes
RD-APK 1.10.02.01-13: Guidelines for technological design of pig farms of peasant (farmer) farms
RD-APK 1.10.02.04-12: Guidelines for technological design of pig farms and complexes
RD-APK 1.10.03.01-11: Guidelines for technological design of goat farms and complexes
RD-APK 1.10.03.02-12: Guidelines for the technological design of sheep facilities
RD-APK 1.10.05.04-13: Guidelines for technological design of poultry enterprises
RD-APK 1.10.07.04-17: Guidelines for the technological design of veterinary and sanitary utilization plants
RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants
RD-APK 1.10.17.01-15: Guidelines for technological design of enterprises for the production of animal feed
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SanPiN 2.2.1/2.1.1.567-96: Sanitary Protection Zones and Sanitary Classification of Enterprises, Constructions and other Objects
SanPiN 2.2.1/2.1.1.984-00: The design, construction, modernization and operation of enterprises, planning and development of residential areas. The Sanitary Protection Zones and
SanPiN 2.2.3.757-99: Working with asbestos and asbestos-based materials
SanPiN 2.6.1.012-94: Production of consumer goods on the factories of the atomic industry
SanPiN 5182-90: Sanitary rules for sewing production
SanPiN 5791-91: Sanitary rules and regulations on the design and operation of greenhouses and greenhouses
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
SO 153-34.02.317-2003: Guidelines for estimating emissions of pollutants into the atmosphere from auxiliary production of thermal power plants and boilers
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SP 106.13330.2012: Livestock, poultry and animal-breeding buildings and facilities
SP 11-107-98: Procedure of Development and Composition of the “Engineering and Technical Measures of Civil Defense. Measures for Prevention of Emergencies” Section of Construction Projects
SP 11-112-2001: The procedure for development and composition of the section "Engineering civil defence measures. Measures for the prevention of emergencies" for urban planning documentation for the areas of urban and rural settlements and other municipality subjects
SP 11-113-2002: The reporting on the engineering civil defence measures and activities to prevent emergencies in the preparation of an application of intent to invest in the construction and justification of investment in the construction of enterprises, buildings and structures
SP 122.13330.2012: Railway and highway tunnels
SP 253.1325800.2016: High-rise buildings utilities
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 280.1325800.2016: Systems of air supply for combustion and removal of combustion products for gas-fired heat generators. Design and development rules
SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device
SP 37.13330.2012: Industrial transport
SP 41-104-2000: Design of independent heat supply sources
SP 41-108-2004: Apartment heating of residential buildings with heat generators on gas fuel
SP 43.13330.2012: Structures for industrial installations
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
SP 60.13330.2016: Heating, ventilation and air conditioning
SP 86.13330.2014: Main (Trunk) pipelines
SP 89.13330.2012: Combustion boiler systems of heating generation
SP 89.13330.2016: Boiler installations
STN Ts 01-95: 1520-mm Gauge Railways
TSN 11-301-2004: Regulation on the procedure for the rehabilitation of unauthorized landfills in the city of Moscow
TSN 30-303-2000 MO: Planning and development of urban and rural settlements. Moscow region
TSN 30-304-2000: City of Moscow Planning and Development Code
TSN 30-311-2004: Urban planning. Planning and development of urban and rural settlements of the Yamalo-Nenets Autonomous Okrug
TSN 31-332-2006: Residential and public high-rise buildings
TSN 41-311-2004 MO: Autonomous heat sources
TSN 41-312-2004 MO: Individual apartment heating system based on double-circuit gas boilers with a closed combustion chamber
TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VNTP 01-98: Land-reclamation systems and facilities. Irrigation systems using sewage and animal waste
VNTP 02-92: Norms of technological design of bakery industry enterprises. Part I. Bakeries
VNTP 02-92: Norms of technological design of bakery industry enterprises. Part II Bakeries
VNTP 04-94: Engineering Design Standards for Wine Bottling Plants
VNTP 06-91: Departmental norms for the technological design of cement plants
VNTP 10M-93: Engineering Design Standards for Microbreweries
VNTP 11-93: Engineering Design Standards for Facilities for the Production of Barley Brewer's Malt
VNTP 12-92 KD: Interim Engineering Design Standards for Facilities for Production of Canned Foods for Child Nutrition
VNTP 12-94K: Engineering Design Standards Facilities of the Canned Fruits and Vegetables Industry
VNTP 13-2-93: Norms of technological design of mining enterprises of metallurgy with underground mining method
VNTP 21-92: Standards for technological design of enterprises of the confectionery industry
VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)
VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities
VNTP 35-93: Engineering Design Standards for Alcoholic Beverage Plants/Distilleries
VNTP 36-92: Standards of technological design of enterprises of the food concentrate industry
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VNTP-88: Departmental norms of technological design of washing and steaming stations
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
VRD 39-1.12-012-2000: Index of Standards Developed by Gazprom OAO Organizations and Facilities
VRD 39-1.13-008-2000: Requirements for ecological safety during the operation of power plants on offshore oil and gas platforms of the Arctic shelf
VRD 39-1.13-038-2001: Industry-specific rationing of nitric oxide emissions from gas transmission companies, taking into account the transformation of NO-NO2 in the atmosphere
VRD 39-1.13-057-2002: Work Management Procedure for Environmental Protection During Well Construction
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
VSN 2-89: Rehabilitation and Development of Historical Districts of St. Petersburg
VSN 34-94 Russian Defense Ministry: Planning and development of military camps
Zh3-189: Recommendations for the development of the section of the project (working draft) "Protection of atmospheric air from pollution by harmful emissions of flue gases of boiler rooms
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
