imgalt

GOST 20295-85

ГОСТ 20295-85

Welded steel pipes for gas and oil pipelines. Technical specifications

Трубы стальные сварные для магистральных газонефтепроводов. Технические условия

Status: Effective - Supersedes. The limitation of effectiveness period has been lifted: Decree of the State Standard No. 1353 of 08/14/91

The standard applies to steel welded straight-seam and spiral-seam pipes with a diameter of 114-1020 mm, used for the construction of gas and oil pipelines, oil product pipelines, technological and field pipelines

Cтандарт распространяется на стальные сварные прямошовные и спиральношовные трубы диаметром 114-1020 мм, применяемые для сооружения магистральных газонефтепроводов, нефтепродуктопроводов, технологических и промысловых трубопроводов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 11/25/1985

SKU: RUSS374564

Price: $289.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Main materials » Steel, cast iron »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V62 Steel pipes and their connecting parts »


As a Replacement Of:

GOST 20295-74: Steel welded pipes for main gas and oil pipelines

The Document References:

GOST 10006-80: Metal pipes

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 1497-84: Metals. Methods of tension test

GOST 162-90: Depth gauges. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions

GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 2216-84: Adjustable smooth snap gauges

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests

GOST 30456-97: Metal production. Rolled steel and tubes. Methods of blow bending tests

GOST 380-2005: Common quality carbon steel. Grades

GOST 3845-75: Metallic tubes. Hydraulic pressure testing method

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8026-92: Levelling rules. Specifications

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications

GOST 24950-81: Bent branches and curved inserts for the turns of the linear parts of steel long distance pipe lines

GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications

GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34802-2021: Gas distribution systems. Coatings of extruded polyethylene for steel pipes. General technical requirements

GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52664-2006: Welded pipe sheet piles. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines

GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications

GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications

GOST R 8.637-2007: State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements

GOST R 9.404-2022: Unified system of protection against corrosion and aging (USPCS). Protective organic coatings. Coating systems based on polyethylene powder compositions. General specifications

Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

MI 2483-98: State system for ensuring uniformity of measurements. The error rates of the balance of delivered and received oil in joint-stock companies for oil transportation. Calculation method

ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads

ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes

OST 153-39.4-027-2002: The technology of dismantling of the linear part of main oil pipelines

OST 34-10-573-93: Corner single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-577-93: Angular, single-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions

OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-42-658-84: Parts and assembly units of NPP pipelines Rwork <2.2 MPa (22 kgf/cm2) T ≤ 350 ° C. Pipes and stock. Assortment.

OST 34-42-747-85: Details and prefabricated units of TPS pipelines, working P<2.2 MPa (22 kg/cm2), t ≤545 °C. Pipes and rolling. Pipe grades.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95

RD 39-00147105-001-91: Method for evaluating the performance of pipes in the linear part of the pipeline based on diagnostic information

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 39-0147103-355-86: Instructions for the use of technology to protect underground and above-ground equipment from corrosion damage during the development and research wells Tengiz

RD 39-0147103-361-86: Method for choosing pipe parameters and calibration calculation of the linear part of trunk pipelines for low-cycle strength

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (

RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS

RD 5-VEP: Guidance document on the use of axial bellows expansion joints of OJSC Metalomp in the design, construction and operation of heating networks according to technical specifications TU 5-99 NFCP.302667.310 TU (SK-160.000.00.TU) "Compensators bellows" SK-MK

Resolution: Rules for the design and safe operation of steam and hot water boilers

Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

SNiP 2.04.12-86: Steel pipelines strength analysis

SNiP 2.05.13-83: Petroleum Product Pipelines Constructed within Cities and Other Populated Areas

SNiP II-45-75: Main pipelines

SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.

SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90

SP 24.13330.2011: Pile foundations

SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88

SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 34-101-98: Selection of pipes for main oil pipelines during construction and repair

SP 373.1325800.2018: Independent heat supply sources. Design rules

SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work

SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)

SP 41-104-2000: Design of independent heat supply sources

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems

SP 510.1325800.2022: Heating units and internal heating systems

ST TsKBA 092-2014: Pipeline valves for trunk pipelines. Regulatory loads from pipelines. Calculation method and numerical values

TR 94.13-01: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 13: Installation Quality Control of Building Services Systems

TSN 41-307-2003: Design and Construction of Piped Heat Distribution Networks with Individual Foam Polyurethane Thermal Insulation. City of Moscow

TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating

TU 1390-002-86695843-08: Steel pipes and parts of pipes with internal anti-corrosion coating based on highly viscous materials

TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm

TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue

TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials

TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating

TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating

TU 1394-006-86695843-10: Steel pipes with epoxy protective coating

TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions

TU 14-3R-37-2000: Steel electric-welded longitudinal pipes with a diameter of 102–1220 mm with an external protective coating based on extruded polyethylene. Technical conditions

TU 576431-006-01297858-99: Heat-hydro-insulated pipes with thermal insulation made of polyurethane foam. Technical conditions

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

VRD 39-1.11-014-2000: Procedural Guidelines for Inspection and Identification of Steel Pipes for Gas and Petroleum Pipelines

VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines

VSN 362-87: Disinfections and Etching of Pipelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!