Manual for SNiP 2.02.01-83
Пособие к СНиП 2.02.01-83
|
|
Guide to designing the foundations of buildings and structures
Пособие по проектированию оснований зданий и сооружений
Status: Reference materials, MP, TPR
The manual details the provisions of SNiP 2.06.14-85 “Protection of mine workings from underground and surface waters” (hereinafter “protection”) in terms of the choice of protection systems, career and mine drainage, requirements for surveys of engineering observations during the construction and operation of mining enterprises and regulations Sec. 18 SNiP 2.02.01-83 “Designing water reduction”, as well as the general provisions for the indicated SNiP on water-reducing and drainage devices, calculations of water reduction and drainage.
Пособие детализирует положения СНиП 2.06.14-85 «Защита горных выработок от подземных и поверхностных вод» (в дальнейшем «защита») в части выбора систем защиты, карьерного и шахтного водоотлива, требований к изысканиям инженерных наблюдений при строительстве и эксплуатации горных предприятий и положения разд. 18 СНиП 2.02.01-83 «Проектирование водопонижения», а также общие для указанных СНиП положения по водопонизительным и водоотводящим устройствам, расчетам водопонижения и водоотвода.
Choose Language:
Format: Electronic (pdf/doc)
Approved: GPI Foundationproject,
8/11/1988
SKU: RUSS374726
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
15. Supports, foundations and foundations of artificial structures »
15.1. Support design and construction documents »
Construction (Max) »
Reference documents »
Reference guidelines to SNiP »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.4 Requirements for protection of surface water bodies in implementation of activities »
2.4.2 Protection of water bodies in design, construction, reconstruction and operation of water management system »
ISO classifier »
73 MINING AND MINERAL PRODUCTS »
73.020 Mining and opencast mining »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
93.020.45 Foundations »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
93.020.60 Protection of territories from ground and surface waters »
The Document References:
GOST 10272-87: Double entry centrifugal pumps. Technical requirements
GOST 10650-72: Peat. Determination of the disintegration degree
GOST 11305-83: Turf. Methods for determination of moisture
GOST 11306-83: Turf and products of its processing. Methods for the determination of ash content
GOST 12071-84: Soils. Sampling, packing, transportation and keeping of samples
GOST 12248-78: Soils. Laboratory methods for determination of shear strength
GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17245-79: Soils. Method of laboratory determination of temporary resistance for single-axial compression
GOST 1839-80: Asbestos cement pipes and couplings for non-pressure pipe lines. Specifications
GOST 18599-83: Polyethylene pressure pipes
GOST 19912-81: Soils. Field test method by dynamic sounding
GOST 20054-82: Concrete non-pressure pipes. Specifications
GOST 20069-81: Soils. Field test method by static sounding
GOST 20276-85: Soils. Field methods for determining deformation characteristics
GOST 20276-99: S o i l s. Methods for field determination of strength and strain characteristics
GOST 20522-75: Soils. Statistical rating characteristics
GOST 21719-80: Soils. In-situ methods of shearing test in boreholes and in massive
GOST 22733-77: Soils. A laboratory method for determining maximum density
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
GOST 23161-78: Soils. Laboratory method for determination of subsiding characteristics
GOST 23740-79: Soils. Methods of laboratory determination of organic composition
GOST 23741-79: Soils. In-situ methods of shearing test mine openings
GOST 23908-79: Soils. A laboratory method for determination of volume change by oedometer test
GOST 24143-80: Soils. Laboratory methods for determination of swelling and shrinking characteristics.
GOST 25100-82: Soils. Classifications
GOST 25260-82: Rocks. Field test method by penetration logging
GOST 25584-90: Soils. Laboratory methods for determination of filtration factor
GOST 25585-83: Soils. Laboratory method of determination of suffusion compressibility
GOST 26518-85: Soils. A laboratory method for determining of the strength and deformation characteristics by the triaxial compression tests
GOST 286-82: Clay sewer pipes
GOST 5180-84: Soils. Laboratory methods for determination
GOST 539-80: Asbestos cement pressure pipes and couplings. Specifications
GOST 5686-78: Piles. Field test methods
GOST 6238-77: Casing pipes and core barrels for prospecting drilling and nipples to them
GOST 632-80: Casing pipes and couplings for them. Specifications
GOST 6942.3-80: Cast iron waste pipes and fittings. Straight pipes. Construction and dimensions
GOST 8411-74: Ceramic drain pipes. Specifications
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements
GOST 9583-75: Cast-iron pressure pipes, manufactured by methods of centrifugal and semicontinuous casting
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 2.06.03-85: Irrigation and Drainage Systems and Structures
SNiP 2.06.14-85: Protection of Mining Excavations Against Groundwater and Surface Water
SNiP II-55-79: Retaining Walls, Ship Locks, Fish Ladders, and Fish Locks
SNiP II-94-80: Underground headings.
VSN 13-77: Installation Guidelines to Power Contact Lines for Electric Industrial Transport and Electric Urban Public Transport
The Document is Referenced By:
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
ODM 218.8.011-2018: Guidelines for determining the characteristics and selection of noise protection structures of roads
RD 153-34.1-21.325-98: Procedural Guidelines for Groundwater Monitoring at Thermal Power Stations Under Construction and in Service
RD 34 15.073-91: Guidance on geotechnical control over preparation of grounds and erection of soil structures in power engineering
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing
SP 250.1325800.2016: Building and structures. Protection against groundwater
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
