Basic sanitary rules for working with radioactive substances and other sources of ionizing radiation
Основные санитарные правила работы с радиоактивными веществами и другими источниками ионизирующих излучений
Status: Not effective - Superseded
The Rules contain requirements for ensuring radiation safety of staff of institutions and the public, as well as for protecting the environment from contamination with radioactive substances.
В Правилах содержатся требования по обеспечению радиационной безопасности персонала учреждений и населения, а также по охране окружающей среды от загрязнения радиоактивными веществами.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Chief State Sanitary Doctor of the USSR,
8/26/1987
SKU: RUSS374772
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of State Committee for Sanitary and Epidemiological Supervision and Ministry of Health of Russian Federation »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
6 Protection against electromagnetic radiation »
6.2 Ionizing radiation »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.280 Protection against radiation »
The Document is Replaced With:
SP 2.6.1.799-99: Main sanitary regulations to ensure radiation safety
The Document References:
SN 245-71: Sanitary standards for the design of industrial enterprises
The Document is Referenced By:
GOST 10772-78: Antipenetration water-based washes
GOST 12.1.048-85: Occupational safety standards system. Radiation control during radioactive waste burial. Nomenclature of controlled parameters
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12.3.027-2004: Foundry work. Safety requirements
GOST 16327-88: Transport packing sets for radioactive materials
GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 17134-80: Radioisotope relay devices
GOST 17225-85: Radiometers for the determination of the contamination of the surface with alpha- and beta- radioactive substances. General technical requirements and service test methods
GOST 18324-73: Ionizing radiation source units for radioisotope instruments of relay type
GOST 18325-80: Laboratory furniture for operation with radioactive substances. General requirements
GOST 18696-90: Thermoelectric radionuclide generators
GOST 19671-91: Tungsten wire for light sources
GOST 20180-91: Radioisotope densitometers for liquid and pulp measuring
GOST 20250-83: Thermoelectric radionuclide generators. Acceptance rules and test methods
GOST 20268-83: Gamma radiation detectors standard glucose type DOG-0,05/2. Specifications
GOST 20271.1-91: Microwave electronic devices. Methods of measuring electrical parameters
GOST 20910-90: Refractory concretes. Specifications
GOST 21497-90: Radioisotope level gauges. General specifications
GOST 22.8.02-97: Safety in emergencies. Nuclear waste dumping in agriculture. General requirements
GOST 22522-91: Radioisotope fire detectors
GOST 22626-77: Neutron generators
GOST 23154-78: Apparatus gamma -therapeutic, static and rotary for long-distance irradiation
GOST 23308-78: Radiochemical hoods. General technical requirements
GOST 23309-78: Boxes radiation-protective. General technical requirements
GOST 23649-79: Encased radioisotope sources of radiation
GOST 24156-80: Steam-eductoring sprayers. General technical requirements
GOST 25057-81: Krypton-85 (gas). Specifications
GOST 25113-86: Non-destructive testing x-ray apparatus for industrial flaw detection. General specifications
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25818-91: Thermal plant fly-ashes for concretes. Specifications
GOST 25926-90: Radionuclide ionising radiation sealed sources. Purability classes and test methods. Norms of degrees of rigidity under climatic and mechanical influences
GOST 25935-83: Dosimetrical instruments. Methods of measuring main parameters
GOST 26114-84: Flaw detectors on the basis of charged particle accelerators
GOST 26222-86: Ionizing-radiation semiconductor detectors
GOST 26239.7-84: Semiconductor silicon. Method of oxygen, carbon and nitrogen determination
GOST 26305-84: Sealed radionuclide alpha-radiation sources. Methods of parameters measurement
GOST 26306-84: Sealed radionuclide beta-radiation sources. Methods of parameters measurement
GOST 26307-84: Sealed radionuclide gamma-radiation sources. Methods of parameters measurement
GOST 26344.0-84: Nuclear instrumentation for nuclear power stations. Basic principles
GOST 26635-85: Nuclear power vessel-encapsulated pressurized-water reactor. General requirements to in-core reactor monitoring system
GOST 27708-88: Decontaminable protective polymeric materials and coatings. Method for testing the ease of decontamination
GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination
GOST 28164-89: Radiation-shielding glove boxes. Types
GOST 28277-89: Non-destructive testing. Welded joints. Electroradiography method. General requirements
GOST 28506-90: Fuel assemblies in nuclear power WWER reactors. Fuel failure detection methods
GOST 28617-90: Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 28948-91: Laboratory tables for operation with radioactive substance. Specifications
GOST 28970-91: Polymer protective coatings for insulation, localization, deactivation, improving, radioactivity situation in radiation protected rooms and box-like premises. Technological requirements
GOST 29075-91: Nuclear instrumentation systems for nuclear power stations. General requirements
GOST 29114-91: Radioactive waste
GOST 30608-98: Tin bronzes. Method of X-ray fluorescent analysis
GOST 30609-98: Brass castings. Method of X-ray fluorescent analysis
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.701-79: Unified system of corrosion and ageing protection. Vulcanized rubbers. Test method for radiation ageing resistance
GOST 9.704-80: Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing
GOST R 22.3.04-96: Safety in emergencies. Dosimetric control of population. Method of absorbed radiation doses measurement using ESR-spectra of tooth enamel
GOST R 22.8.02-94: Safety in emergencies. Nuclear waste dumping in agriculture. General requirements
GOST R 22.8.08-2001: Safety in emergencies. Method of external gamma rays absorbed dose determination by thermoluminescence of quartz extracted from building ceramics. The order of carrying out measurements
GOST R 50089-92: Radioactive waste. Method for measurement of long-time alpha-resistant measurements of solidified radioactive waste
GOST R 50584-93: Radiation engineering. Radiation-ecological requirements
GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating
GOST R 50629-93: Special form radioactive material. General technical requirements and test methods
GOST R 50723-94: Laser safety. General requirements for development and operation the laser products
GOST R 50773-95: Polymer protective coatings for the improvement of radioactive situation. Methods used to determine the decontamination coefficient and time of protective action
GOST R 50801-95: Wood raw material, forest products, semi-produced materials and wood products. Sampling rules and methods of measuring specific activity of radionuclides
GOST R 50888-96: Radioecological passport of special enterprise on handling with radioactive waste. Basic principles
GOST R 51037-97: Protective polymer coatings for insulation, localization, localization dust suppression and deactivation. General technical requirements
GOST R 51098-97: Radionuclide generators. Nomenclature of indices
GOST R 51102-97: Decontaminable protective polymeric coatings. General technical requirements
GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
GOST R 52985-2008: Ecological safety of rocket-space technique. General technical requirement
GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for RD 78.145-93: Manual for the guiding document "Systems and complexes of security, fire and security-fire alarms. Rules for the production and acceptance of work"
Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction
MDS 12-27.2006: Methodological manual for conducting labor protection training for executives and specialists of construction organizations
MGSN 1.01-97: Part 1: Interim Urban Development Code of the City of Moscow
MGSN 2.02-97: Allowable levels of ionizing radiation and radon at the construction sites
MI 1788-87: State system for ensuring uniformity of measurements. Dosimetric devices for measuring exposure dose and exposure dose rate, absorbed dose and absorbed dose rate in photon radiation air. Verification Method
MI 1798-87: Guidelines. State system for ensuring uniformity of measurements. Alpha spectrometers with semiconductor detectors. Method of verification
MI 1888-88: Guidelines. GSE. Normal measurement conditions in flexible manufacturing systems. General provisions
MI 2360-95: State system for ensuring uniformity of measurements. Analyzer X-ray fluorescent universal series of Spektro X-Lаb. Method of verification
MI 2381-96: State system for ensuring uniformity of measurements. Installation spectrometric gamma resonance IN-96. Method of verification
MI 2383-96: State system for ensuring uniformity of measurements. Analytical mobile set Spektro (ScopeTro X-TesT, SesTro-ProT). Method of verification
MI 2387-97: State system for ensuring uniformity of measurements. X-ray spectrometers PW-1606 and PW-1410. Method of verification
MU 2.1.674-97: Sanitary and hygienic estimation of construction materials with use of industrial waste
MU 34-70-100-85: Methodical instructions for commissioning works on the thermal mechanical equipment of the machine halls of nuclear power plants
NPB 66-97: Self-contained fire detectors. General technical requirements. Test methods
NPB 81-99: Detectors using ionization. General technical requirements. Test methods
NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules
OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,
OST 10071-95: The soil. Methodology for the determination of 137Cs in farmland soils
OST 102-51-85: Non-destructive testing. Welded pipe joints. Radiographic method.
OST 26-11-10-93: Welded joints. X-Ray TV testing method.
OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements
PB 06-07-92: Uniform Safety Requirements for Underground Development of Mineral Deposits Using Opencast Method
PB 06-09-92: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates
PB 06-28-93: Safety Requirements for the Construction/Rehabilitation and Operation of Underground Facilities Used for the Purposes Unrelated to the Extraction of Mineral Resources
PB 06-317-99: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
PB 11-80-94: Safety Requirements in Blast Furnace Operations
PNAE G-14-029-91: Safety rules for storage and transportation of nuclear fuel at nuclear power plants
PNAE G-7-017-89: Unified technique of inspection of base materials (semifinished products), welded joints and deposits of equipment and pipelines of atomic power plants. Ultrasonic inspection
PND F 14.1:2:4.133-98: Quantitative chemical analysis of water. Methods for measuring mass concentrations of chromium, iron, bismuth, manganese, cobalt, nickel, copper, lead, zinc, and mercury ions in aqueous media using an IP-TM-D converter using the X-ray fluorescence method on the INLAN-RF complex
POT R M-002-97: Intersectoral rules on labor protection in foundry
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
POT R O-14000-007-98: Ordinance - Occupational Safety and Health for Material Storage
POT RO-32-TsP-652-99: Rules for labor protection during the maintenance and repair of railway tracks and structures
PPBO-105-87: Fire Safety Regulations for Institutions, Organizations, and Companies Administered by the USSR Academy of Sciences
PRBAS-89: Rules of radiation safety in the operation of nuclear power plants
R 265-77: Guidance on the technology and organization of construction of trunk pipelines with a diameter of 1220-1420 mm by the flow method of factory-insulated pipes
R 412-81: Recommendations for the design and construction of offshore subsea oil and gas pipelines
RD 03-151-97: Guidelines for ensuring the requirements of radiation safety in the extraction and processing of mineral raw materials at enterprises (organizations) of the mining and nonmetallic industry, referred to as radiation-hazardous industries
RD 03-33-95: Guidelines for Supervision of Construction and Installation Practices at Nuclear and Radiation Hazardous Facilities
RD 102-011-89: Occupational Safety and Health. Management and Procedural Documents
RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks
RD 31.21.17-95: Organizational and Technical Requirements for Ensuring Nuclear and Radiation Safety during Docking of Nuclear Power Plants and Nuclear Technological Service Vessels
RD 34.17.425-86: Procedural Guidelines for X-Ray Detection of Macrodamage to Metal in Circulation Piping and Housing Equipment of Electric Power Generating Stations
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 34.49.504-96: Model Guidelines for Operation of Automatic Fire Alarms at Energy Industry Facilities
RD 39-22-113-78: Interim Regulation for Protection against Static Electricity in Process Facilities and Structures in the Oil and Gas Industries
RD 50-25645.308-85: Methodological instructions. fluence and the absorbed dose check at materials and technical devices trials at proton accelerators.
RD 50-373-82: Guidelines. Solutions of radium-226 of the 2nd category are exemplary. Methods and means of verification
RD 50-691-89: Guidelines. State system for ensuring uniformity of measurements. Absorbed doses of photon (1-50 MeV) and electron (5-50 MeV) radiation in radiation therapy. Methods of determination
RD 50-700-91: Guidelines. Industrial particle accelerators. General requirements for the measurement of parameters
RD 78.145-93: Guiding document systems and complexes of security, fire and security and fire alarm rules for execution and acceptance of work
RD 95 10366-89: Deactivating formulations. Methods for determining quality indicators
RD ROSEK-01-002-96: Hoisting machines. Metal structures. Radiation control. Key Points
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RM 78.36.001-99: Engineers' and Electricians' Guide to Security Alarm and Fire Alarm Systems
RTM 36.16-89: Guidelines for Application of the X-Ray Video Method for Inspection of Welded Joints in Rolled Stock for Tanks
SanPiN 2.2.3.570-96: Hygienic Requirements for Coal Mining Industry and Organization of Work
SanPiN 2.2.3.757-99: Working with asbestos and asbestos-based materials
SanPiN 2.6.1.012-94: Production of consumer goods on the factories of the atomic industry
SanPiN 5059-89: Sanitary rules for aircraft maintenance bases of civil aviation operating enterprises
SP 11-102-97: Engineering environmental site investigations for construction
SP 11-109-98: Prospecting for soil building materials
SP 12-133-2000: Safety in construction. Statutes on the procedure for certification of work stations by working conditions in construction and housing and utilities.
SP 2.6.1.543-96: Production and Application of Radioluminescent Light Sources containing Gaseous Tritium
SP 2195-80: Sanitary rules for ships of the fleet of the fish industry of inland waters of the USSR
SP 3.5.675-97: Hygienic requirements for institutions, organizations, companies and individuals involved in the disinfection activities
SP 4043-85: Sanitary regulations for coal industry enterprises
SP 42.13330.2011: Urban development. Urban and rural planning and development
SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations
SP AES-79: Sanitary rules for the design and operation of nuclear plants
SP AS 88/93: Sanitary Regulations for the Design and Operation of Nuclear Power Plants
SP LKP-91: Sanitary rules for the liquidation, conservation and reprofiling of enterprises for the extraction and processing of radioactive ores
TOI R-153-005-97: Typical labor protection instruction for the management of liquid and solid radioactive waste in an area contaminated with artificial radionuclides
TSN 11-301-2004: Regulation on the procedure for the rehabilitation of unauthorized landfills in the city of Moscow
TSN 30-303-2000 MO: Planning and development of urban and rural settlements. Moscow region
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VRD 39-1.10-049-2001: Правила распространяются на эксплуатацию, реконструкцию и ремонт магистральных, межпромысловых и промысловых конденсатопродуктопроводов и отражают специфику транспорта стабильеого, нестабильного, деэтанизированного конденсата, широкой фракции легких углев
VSN 171-84: Instructions on welding technology and quality control of welded joints of field pipelines
VSN 25-09.68-85*: Regulations for execution and acceptance of works. Installations of security, fire and security-fire alarm systems
VSN 311-89: Erection of Upright Cylindrical Steel Tanks With Capacities of 100 to 50,000 Cubic Meters for Storage of Petroleum and Petroleum Product
VSN VK 4-90: Guidelines on Preparation and Operation of Non-Potable and Potable Water Supply Systems in Emergencies
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.