TSN 23-322-2001
ТСН 23-322-2001
|
|
Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Kostroma region
Энергоэффективность жилых и общественных зданий. Нормативы по теплозащите зданий. Костромская область
Status: Effective
Norms must be observed in the Kostroma region when designing new, reconstructed, overhaul heated buildings (multi-family and single-family) and public buildings (pre-school, educational, medical institutions and clinics, educational, spectacular, administrative and sports), as well as others public buildings with standardized temperature and relative humidity of indoor air. It is allowed to use the provisions of these norms in the design of office buildings of industrial enterprises and buildings for placement of small household goods in them.
Нормы должны соблюдаться на территории Костромской области при проектировании новых, реконструируемых, капитально ремонтируемых отапливаемых зданий (многоквартирных и одноквартирных) и зданий общественного назначения (дошкольных, общеобразовательных, лечебных учреждений и поликлиник, учебных, зрелищных, административно-бытовых и спортивных), а также других зданий общественного назначения с нормируемой температурой и относительной влажностью внутреннего воздуха. Допускается положения настоящих норм использовать при проектировании административно-бытовых зданий промпредприятий и зданий для размещения в них малых производств бытового назначения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Administration of Kostroma region,
12/9/2000
SKU: RUSS374804
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document References:
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 23250-78: Building materials. Method of specific heat determination
GOST 24816-81: Building materials. Method of hygroscopic moisture determination
GOST 25380-82: Buildings and structures. Method of measuring density of heat flows passing through enclosure structures
GOST 25609-83: Soft and tile materials for floor covering. Procedure for determining the heat absorption value
GOST 25891-83: Buildings and structures. Methods of determination of air tightness of enclosing structures
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 26253-84: Buildings and structures. Method for determining the building structure ability to maintain a relatively constant temperature of its inside surface under cycling thermal influence
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe
GOST 30290-94: Building materials and products. Surface converter method of thermal conductivity determination
GOST 30402-96: Building materials Ignitability Test Meth
GOST 30403-96: Building structures fire hazard test method
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 7025-91: Ceramic and calcium silicate bricks and stones. Methods for water absorption and density determination and frost resistance control
GOST 7076-87: Building materials and products. Method of thermal conductivity determination
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles
GOST R 1.5-92: State system for standardization of the Russian Federation. General requirements for lay-out, formulation, presentation and contents of standards
GOST R 51032-97: Building materials spread flame test method
MGSN 2.01-94: Energy Saving in Buildings
NPB 244-97: Building materials. decorative-finishing and facing materials. Materials for cover of floor. roofing, hydro- and heat-insulating materials. parameters of fire danger
RDS 10-231-93*: GOST R. certification system. The main provisions of certification of products in construction
RDS 10-232-94: GOST R. certification system. Procedure for certification of products in construction
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SP 12-101-98: Technical rules for manufacture of the outdoor thermal insulation of buildings with fine plaster on the insulant
SP 23-101-2000: Design of thermal performance of buildings
TSN 23-304-99: Energy Conservation in Buildings. Requirements for Thermal Insulation and Heat, Water, and Electricity Supply
VSN 58-88(r): Ordinance for Rehabilitation, Renovation, and Technical Inspection of Residential Occupancies, Public Utility Facilities, and Facilities Used for Amusement, Entertainment, and Recreation
The Document is Referenced By:
TSN 23-350-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Vologodskaya Oblast
TSN 23-355-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Kirov region
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
