Federal Law 184-FZ
Федеральный закон 184-ФЗ
|
|
About technical regulation
О техническом регулировании
Status: Effective
Federal law regulates relations arising from: development, adoption, application and fulfillment of mandatory product requirements, including buildings and structures (hereinafter referred to as products), or to products and related to product requirements design processes (including surveys), production, construction, installation, commissioning, operation, storage, transportation, sale and disposal; the development, adoption, application and execution on a voluntary basis of requirements for products, design processes (including surveys), production, construction, installation, commissioning, operation, storage, transportation, sale and disposal, work or services; conformity assessment
Федеральный закон регулирует отношения, возникающие при:
Choose Language:
Format: Electronic (pdf/doc)
Approved: President of Russian Federation,
12/27/2002
SKU: RUSS374868
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of roads »
9. Procedure for development of standard, regulatory and methodological documentation »
Construction (Max) »
Regulatory documents »
Standardization and rationing »
Construction (Max) »
Regulatory documents »
Quality control, certification »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
I. Federal laws »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
I. Legislative and regulatory legal acts infield of atomic energy use »
2. Federal laws of Russian Federation »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
Standards for pipe fittings (TPA) »
1. Fundamental standards for injection molding machines »
1.3 Reliability and safety »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.3 Environmental safety requirements for exploration, extraction of groundwater and minerals »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.4 Machines and equipment for mining, oil industry and quarrying »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.4 Thermal and electrothermal equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.1 Electricity and heat »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.120 Standardization. General rules »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.20 Certification of products and companies. Conformity assessment »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.160 Legislation. Administration »
ISO classifier »
67 PRODUCTION OF FOOD »
67.020 Processes in food industry »
The Document References:
Code 145-FZ: Budget Code of the Russian Federation
Federal Law 104-FZ: Concerning the Introduction of Amendments to the Budget Code of the Russian Federation and Certain Legislative Acts of the Russian Federation in Connection with the Improvement of the Budgetary Process
Federal Law 115-FZ: On the legal status of foreign citizens in the Russian Federation
Federal Law 216-FZ: On innovative scientific and technological centers and on amendments to certain legislative acts of the Russian Federation
Federal Law 340-FZ: On Amending the Town Planning Code of the Russian Federation and Certain Legislative Acts of the Russian Federation
Federal Law 83-FZ: Concerning the Introduction of Amendments to Certain Legislative Acts of the Russian Federation in Connection with the Improvement of the Legal Status of State (Municipal) Institutions
Law of the Russian Federation 5663-1: About space activities
The Document is Referenced By:
800-st order: On the approval of the national standard
802 order: On the approval of the national standard
Code 195-FZ: Code of the Russian Federation on administrative offenses
Decree 1387: On approval of the Rules of organization and conduction of works on obligatory confirmation of conformity of means of communication and on invalidation of some acts of the Government of the Russian Federation and item 6 of amendments that are introduced into acts of the Government of the Russian Federation on the activities of the Ministry of Communications and Mass Communications of the Russian Federation and the Federal Service for Supervision of Communications and Mass Communications
Decree 1394: Rules for granting subsidies from the federal budget to compensate part of the costs associated with the development of international, regional and national documents in the field of standardization, ensuring the application and enforcement of the requirements of technical regulations, international agreements and normative legal acts of the Russian Federation
Decree 201: Regulations on the formation and maintenance of a unified register of certificates of conformity, the provision of information contained in the specified register and payment for the provision of such information
Decree 241: The list of products that, for placement under customs procedures that provide for the possibility of alienation or use of these products in accordance with their intended purpose on the territory of the Russian Federation, are subject to mandatory confirmation of compliance with the requirements of the Federal Law "Technical Regulations on Fire Safety Requirements"
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
Directive 1732-r: On the publication and application of ODM 218.2.074-2016 "Methodological recommendations on the use of structural composite anchors for the device of transverse and longitudinal expansion joints instead of steel anchor rods in the coatings of rigid type
Directive 1733-r: On the publication and application of ODM 218.4.024-2016 "Methodology for assessing the timing of road construction works under the influence of destabilizing factors".
Federal Law 109-FZ: About the safe handling of pesticides and agrochemicals
Federal Law 149-FZ: About information, information technology and information protection
Federal Law 159-FZ: On agricultural products, raw materials and food with improved characteristics
Federal Law 162-FZ: About standardization in the Russian Federation
Federal Law 171-FZ: On state regulation of the production and turnover of ethyl alcohol, alcoholic and alcohol-containing products and on limiting the consumption (drinking) of alcoholic products
Federal Law 191-FZ: On the entry into force of the Town Planning Code of the Russian Federation
Federal Law 216-FZ: On innovative scientific and technological centers and on amendments to certain legislative acts of the Russian Federation
Federal Law 257-FZ: On Roads and Road Activities in the Russian Federation and on Amending Certain Legislative Acts of the Russian Federation
Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation
Federal Law 29-FZ: About quality and food safety
Federal Law 412-FZ: On accreditation in the national accreditation system
Federal Law 453-FZ: On Amendments to Certain Legislative Acts of the Russian Federation and Declaring Invalid Part 8 of Article 30 of the Federal Law "On Accreditation in the National Accreditation System
Federal Law 7-FZ: Environmental Protection
Federal Law 83-FZ: Concerning the Introduction of Amendments to Certain Legislative Acts of the Russian Federation in Connection with the Improvement of the Legal Status of State (Municipal) Institutions
GOST 31561-2012: Longwall powered roof chocks. Basic parameters. General technical requirements. Test methods
GOST 32019-2012: Technical condition monitoring of the unique buildings and constructions. Rules of design and installation of permanent systems (stations) of monitoring
GOST 33435-2015: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST 34012-2016: Railway automatics and telemechanics equipment. General technical requirements
GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions
GOST R 1.1-2005: Standardization in the Russian Federation. Technical committees for standardization. Order of creation and activity
GOST R 1.1-2013: Standardization in the Russian Federation. Technical committees for standardization. Rules of organization and function
GOST R 1.12-2004: Standardization in the Russian Federation. Terms and definitions
GOST R 1.13-2004: Standardization in the Russian Federation. Notifications on projects of documents in standardization. General requirements
GOST R 1.14-2009: Standardization in the Russian Federation. Program of development national standards. Requirements to structure, rules of forming, of the statement and of the control over realization program of development national standards
GOST R 1.15-2009: Standardization in the Russian Federation. Company standards department. Rules of organization and function
GOST R 1.16-2011: Standardization in Russian Federation. Preliminary national standards. Instructions for development, taking over, application and cancellation
GOST R 1.18-2018: Standardization in the Russian Federation. Register of technical conditions. Rules for the formation, maintenance and receipt of information
GOST R 1.19-2023: Standardization in the Russian Federation. Code of Practice. Rules of construction, statement, design and marking
GOST R 1.2-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules for development, taking over, reform and cancellation
GOST R 1.3-2018: Standardization in the Russian Federation. Product specifications. General requirements for content, design, labeling and updating
GOST R 1.4-2004: Standardization in Russian Federation. Standards of organizations. General
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 1.6-2005: Standardization in the Russian Federation. Draft standards. Organization of realization of expertise
GOST R 1.7-2008: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of presentation and indication by development on the basis of application of international standards
GOST R 1.8-2011: Standardization in Russian Federation. Interstate standards. Rules of developing, application, renovation and cease of application in the Russian Federation
GOST R 1.9-2004: Standardization in the Russian Federation. Mark of conformity to national standards of the Russian Federation. Representation. Application order
GOST R 12.0.006-2002: Occupational safety standards system. General requirements on occupational health and safety management in organization system
GOST R 12.0.007-2009: Occupational safety standards system. Labour protection management systems in organizations. Guidelines requirements on development, implementation, audit and improvement
GOST R 12.0.008-2009: Occupational safety standards system. Occupational safety and health management systems in organizations. Audit
GOST R 12.0.009-2009: Occupational safety standards system. Occupational safety and health management systems in small organizations. Requirements and recommendations for application
GOST R 12.0.010-2009: Occupational safety standards system. Occupational safety and health management systems. Hazard and risks identification and estimation of risks
GOST R 12.1.009-2009: Occupational safety standards system. Electrical safety. Terms and definitions
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 12.1.031-2010: Occupational safety standards system. Lasers. Methods of dosimetric control of laser radiation
GOST R 12.2.143-2009: Occupational safety standards systems. Photoluminescent evacuation systems. Requirements and methods of test
GOST R 12.4.191-2011: Occupational safety standards system. Respiratory protective devices. Filtering half masks to protect against particles. General specifications
GOST R 12.4.230.1-2007: Occupational safety standards system. Personal eyes protection means. General technical requirements
GOST R 12.4.230.2-2007: Occupational safety standards system. Personal eye protection. Optical and non-optical parameters test methods
GOST R 12.4.231-2007: Occupational safety standards system. Respiratory protective devices. АX gas filters and combined filters for protection against low-boiling organic compounds. General specifications
GOST R 12.4.232-2007: Occupational safety standards system. Respiratory protective devices. SX gas filters and combined filters for protection against specific named compounds. General specifications
GOST R 12.4.233-2007: Occupational safety standards system. Respiratory protective devices. Terms and definitions
GOST R 12.4.234-2007: Occupational safety standards system. Protective clothing for thermal hazards of an electric arc. General technical requirement and test methods
GOST R 12.4.235-2007: Occupational safety standards system. Respiratory protective devices. List of equivalent terms
GOST R 12.4.236-2007: Occupational safety standards system. Protective clothing for low temperatures. Technical requirements
GOST R 12.4.237-2007: Occupational safety standards system. Protective clothing. Methods of testing the material on impact of splashes of molten metal
GOST R 12.4.238-2007: Occupational safety standards system. Personal eye and face protection equipment during welding and related processes. General specifications
GOST R 12.4.239-2007: Occupational safety standards system. Additional protective footwear for works with radioactive and chemically toxic substances. General technical requirements and test methods
GOST R 12.4.240-2007: Occupational safety standards system. Additional personal protective clothing for works with radioactive and chemically toxic substances. General technical requirements and test methods
GOST R 12.4.241-2007: Occupational safety standards system. Additional respiratory protective equipment for works with radioactive and chemically toxic substances. General requirements and test methods
GOST R 12.4.242-2007: Occupational safety standards system. Decontaminable protective footwear with textile top for works with radioactive and chemically toxic substances. General technical requirements and test methods
GOST R 12.4.243-2007: Occupational safety standards system. Personal protection equipment for works with radioactive substances and materials for their making. Testing methods and evaluation of decontamination ratio
GOST R 12.4.244-2007: Occupational safety standards system. Personal protective means for works with radioactive substances and materials for their making. Testing method of solutions decontaminating ability
GOST R 12.4.245-2007: Occupational safety standards system. Bump caps. General technical requirements. Test methods
GOST R 12.4.246-2008: Occupational safety standards system. Personal protective means of hands. Gloves. General technical requirements. Test methods
GOST R 12.4.247-2008: Occupational safety standards system. Protective clothing for protection from sparks and splashes of melted metal. Technical requirements
GOST R 12.4.248-2008: Occupational safety standards system. Protective clothing overalls for protection from acid solutions. Technical requirements
GOST R 12.4.250-2009: Occupational safety standards system. Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements. Testing. Marking
GOST R 12.4.251-2009: Occupational safety standards system. Respiratory protective devices. Gas filters and combined filters. Requirements. Testing. Marking
GOST R 12.4.252-2009: Occupational safety standards system. Respiratory protective devices. Fresh air hose breathing apparatus. Requirements, testing, marking
GOST R 12.4.253-2011: Occupational safety standards system. Respiratory protective devices. Self-contained compressed oxygen and chemical oxygen apparatus for mine rescuers. General specifications
GOST R 12.4.254-2010: Occupational safety standards system. Personal eye-protection. Filters and eye-protection against laser radiation. General technical requirements and test methods
GOST R 12.4.255-2011: Occupation safety standards system. Personal hearing protective equipment. General technical requirements. Mechanical test methods
GOST R 12.4.256-2011: Occupational safety standards system. Protective clothing against toxic chemicals in the form of gas and vapours. Technical requirements and test methods
GOST R 12.4.257-2011: Occupational safety standards system. Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Types 6 and PB [6])
GOST R 12.4.258-2011: Occupational safety standards system. Protective clothing against liquid chemicals. Performance requirements for liquid tight or spray-tight clothing (Types 3 and 4). Technical requirements
GOST R 12.4.259-2011: Occupational safety standards system. Ventilated and non-ventilated «gas-tight» (Type 1) and «non-gas-tight» (Type 2) chemical protective suits. Technical requirements
GOST R 12.4.260-2011: Occupational safety standards system. Special clothing for protection from mechanical action. Method for determination of resistance to puncture
GOST R 12.4.261-2011: Occupational safety standards system. Special clothing for protection from toxic chemicals. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions
GOST R 12.4.262-2011: Occupational safety standards system. Protective clothing against toxic chemicals. Method for determination of resistance to permeation by liquids and gases
GOST R 12.4.271-2012: Occupational safety standards system. Insulating suits. Method of definition of protection coefficient for gaseous substances
GOST R 14.01-2005: Ecological management. General rules and objectives of regulation
GOST R 14.03-2005: Ecological management. Influence factors. Classification
GOST R 14.07-2005: Ecological management. Guide for the inclusion of environmental aspects in technical regulations
GOST R 14.08-2005: Ecological management. Order of the inclusion of environmental aspects in production standards (ISO/IEC 64)
GOST R 14.09-2005: Ecological management. Leadership on estimation of risk in field ecological management
GOST R 14.11-2005: Ecological management. General requirements for bodies operating assessment and certification/registration of system ecological management (ISO/IEC 66)
GOST R 14.12-2006: Ecological management. Integrating environmental aspects into product design and development
GOST R 14.13-2007: Ecological management. Integral impact assessment of industrials on environment during the industrial ecology control
GOST R 15.013-2016: System of products development and launching into manufacture. Medical devices
GOST R 15.111-2015: System of product development and launching into manufacture. Technical aids for disabled persons
GOST R 21.1001-2009: System of design documents for construction. General principles
GOST R 21.1002-2008: System of design documents for construction. Norms control of design and working documentation
GOST R 21.1003-2009: System of design documents for construction. Registration and storage rules design documentation
GOST R 21.1101-2009: System of design documents for construction. Main requirements for design and working documents
GOST R 22.1.12-2005: Safety in emergencies. Structured system for monitoring and control of building. Construction engineering equipment. General requirements
GOST R 22.9.10-2006: Safety in emergencies. Rescue descending devices. Classification. General technical requirements
GOST R 25645.167-2005: Space environment (natural and artificial). Model of spatial and time distribution for space debris in LEO
GOST R 27.001-2009: Dependability in technics. Dependability management system. Basic principles
GOST R 27.002-2009: Dependability in technics. Terms and definitions
GOST R 27.003-2011: Dependability in technics. Dependability management. Guide to the assignment of dependability technical requirements
GOST R 27.004-2009: Dependability in technics. Failure mechanism models
GOST R 27.201-2011: Dependability in technics. Design expert review
GOST R 27.301-2011: Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
GOST R 27.302-2009: Dependability in technics. Fault tree analyses
GOST R 27.403-2009: Dependability in technics. Compliance tests plans for reliability
GOST R 27.404-2009: Dependability in technics. Compliance test plans for steady-state availability
GOST R 27.601-2011: Dependability in technics. Dependability management. Maintenance and maintenance support
GOST R 33.1.02-2008: United Russian insurance fund of documentation. Insurance copies of cinemadocumentation and photodocumentation. General specifications
GOST R 41.105-2005: Uniform provisions concerning the vehicles intended for the carriage of dangerous goods with regard to their specific constructional features
GOST R 41.112-2005: Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps
GOST R 41.52-2005: Uniform provisions concerning the categories M2 and M3 small capacity vehicles with regard to their general construction
GOST R 41.55-2005: Uniform provisions concerning mechanical coupling components of combinations of vehicles
GOST R 42.4.02-2015: Civil defence. Modes of radiation protection in case of accidents at nuclear facilities
GOST R 43.0.5-2009: Informational ensuring of equipment and operational activity. Informational and exchangeable processes in technical activity. General principles
GOST R 43.2.5-2011: Informational ensuring of equipment and operational activity. Language of operation activity. Grammar
GOST R 50.02.02-2017: Conformity assessment system for the use of nuclear energy. Conformity assessment of products. Nonconformities classification
GOST R 50.03.01-2017: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of review of the technical documentation. The procedure
GOST R 50.03.02-2017: Conformity assessment system for the use of nuclear energy. Experts on conformity assessment in the form of review of the technical documentation. Requirements and procedure of confirmation of competence
GOST R 50.03.03-2019: Conformity assessment system in the field of atomic energy use. The cost of conducting a conformity assessment in the form of an examination of technical documentation. Determination procedure
GOST R 50.03.04-2020: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of examination of technical documentation. Requirements for Expert Organizations
GOST R 50.06.01-2017: Conformity assessment system for the use of nuclear energy. Сonformity assessment of products in the form of acceptance. The procedure of
GOST R 50.06.02-2017: Conformity assessment system for the use of nuclear energy. Specialists in conformity assessment in the form of acceptance. Requirements and procedure of confirmation of competence
GOST R 50.07.01-2017: Conformity assessment system for the use of nuclear energy. Decision on the application of imported products for nuclear power plants. The decision-making procedure
GOST R 50.08.02-2017: Conformity assessment system for the use of nuclear energy. Conducting inspection control over certified products. The procedure
GOST R 50.08.04-2017: Conformity assessment system for the use of nuclear energy. The results (protocols) of product testing. Procedure of recognition
GOST R 50.08.04-2022: System of conformity assessment in the field of atomic energy use. Results (protocols) of product tests. The procedure of acknowledgement
GOST R 50.08.05-2017: Conformity assessment system for the use of nuclear energy. Experts in certification of products. Requirements and order of confirmation of competence
GOST R 50.08.07-2017: Conformity assessment system for the use of nuclear energy. The cost of the mandatory product certification and inspection. The procedure for determining
GOST R 50.11.03-2017: Conformity assessment system for the use of nuclear energy. Experts in certification of quality management systems. Requirements and procedure of confirmation of competence
GOST R 50030.1-2007: Low-voltage switchgear and controlgear. Part 1. General rules
GOST R 50030.2-2010: Low-voltage switchgear and control gear. Part 2. Circuit-breakers
GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices
GOST R 50030.5.4-2011: Low-voltage switchgear and control gear. Part 5-4. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
GOST R 50030.5.5-2011: Low-voltage switchgear and control gear. Part 5-5. Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
GOST R 50030.6.1-2010: Low-voltage switchgear and control gear. Part 6. Multiple function equipment. Section 1. Transfer switching equipment
GOST R 50030.7.1-2009: Low-voltage switchgear and control gear. Part 7.1. Ancillary equipment. Terminal blocks for copper conductors
GOST R 50030.7.2-2009: Low-voltage switchgear and control gear. Part 7.2. Ancillary equipment. Protective conductor terminal blocks for copper conductors
GOST R 50030.7.3-2009: Low-voltage switchgear and control gear. Part 7.3. Ancillary equipment. Safety requirements for fuse terminal blocks
GOST R 50345-2010: Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations. Part 2. Circuit-breakers for a.c. operation
GOST R 50397-2011: Electromagnetic compatibility of technical equipment. Тerms and definitions
GOST R 50400-2011: Fire-fighting equipment. Hose branching. General technical requirements. Test methods
GOST R 50402-2011: Equipment used in gas welding, cutting and allied processes. Safety devices for fuel gases and oxygen or compressed air. Technical requirements and tests
GOST R 50462-2009: Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
GOST R 50529-2007: Civil and service fire-arms, industrial and special devices. Safety requirements and test methods for safety
GOST R 50571.1-2009: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics and definitions
GOST R 50571.16-2007: Low-voltage electrical installations. Part 6. Tests
GOST R 50571.28-2006: Electrical installations of buildings. Part 7-710. Requirements for special electrical installations. Medical locations
GOST R 50571.29-2009: Electrical installations of buildings. Part 5-55. Selection and erection of electrical equipment. Other equipment
GOST R 50571.3-2009: Low-voltage electrical installations. Part 4-41. Requirements for safety ensuring. Protection against electric shock
GOST R 50571.5.52-2011: Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
GOST R 50571.7.713-2011: Low-voltage electrical installation. Part 7-713. Requirements for special installations or their locations. Furniture
GOST R 50571.7.717-2011: Low-voltage electrical installations. Part 7-717. Requirements for special installations or locations. Mobil or transportable units
GOST R 50571-4-44-2011: Low-voltage electrical installations. Part 4-44. Safety requirements. Protection against voltage disturbances and electromagnetic disturbances
GOST R 50588-2012: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50681-2010: Tourist service. Projection of tourists service
GOST R 50779.26-2007: Statistical methods. Point estimates, confidence intervals, prediction intervals and tolerance intervals for exponential distribution
GOST R 50779.27-2007: Statistical methods. Goodness-of-fit tests and confidence intervals for Weibull distributed data
GOST R 50779.28-2007: Statistical methods. Power law model. Goodness of-fit tests and estimation methods
GOST R 50786-2012: Metal-cutting household machine-tools. Safety requirements
GOST R 50789-2012: Electromagnetic compatibility of technical equipment. Alarm and anticreeping systems of vehicles. Requirements and test methods
GOST R 50827.1-2009: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 1. General requirements
GOST R 50827.2-2009: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 21. Particular requirements for boxes and enclosures with provision for suspension means
GOST R 50827.4-2009: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 23. Particular requirements for floor boxes and enclosures
GOST R 50827.5-2009: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 24. Particular requirements for boxes and enclosures for housing protective devices and similar power consuming devices
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 50860-2009: Aircrafts and helicopters. Antenna feeder devices of connection, navigation, landing and air traffic control. General technical requirements, parameters, methods of measurements
GOST R 50862-2005: Safes and strong rooms. Requirements and methods of tests for resistance to burglary and fire
GOST R 50897-2010: Automatic play machines. Safety requirements and test methods
GOST R 50902-2011: Fuel peat for pulverized burning. Specifications
GOST R 50922-2006: Protection of information. Basic terms and definitions
GOST R 50943-2011: All-terrain vehicles. Technical requirements and test methods.
GOST R 50944-2011: Snowmobiles. Technical requirements and test methods.
GOST R 50953-2008: Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods
GOST R 50970-2011: Тгаffic contгol devices. Guide posts. General technical requirements. Application rules
GOST R 50971-2011: Тгаffic control devices. Road reflectors. General technical requirements. Application rules
GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods
GOST R 51000.4-2008: General requirements for accreditation of testing laboratories
GOST R 51000.4-2011: General requirements for accreditation of testing laboratories
GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51049-2008: Fire equipment. Pressure fire hoses. General technical requirements. Test methods
GOST R 51062-2011: Sod fuel peat for heating purposes. Specifications
GOST R 51101-2012: Metalworking and woodworking machines. Testing methods of compliance with safety requirements
GOST R 51136-2008: Protective laminate glass. General specifications
GOST R 51185-2008: Tourist services. Means of accommodation. Generic requirements
GOST R 51241-2008: Access control units and systems. Classification. General technical requirements. Test methods
GOST R 51256-2011: Traffic control devices. Road marking. Classification. Technical requirements
GOST R 51304-2009: Services of trade. General requirements
GOST R 51305-2009: Services of trade. Requirements for personnel
GOST R 51317.1.2-2007: Electromagnetic compatibility of technical еquipment. Methodology for the achievement of the functional safety of technical equipment with regard to electromagnetic disturbance
GOST R 51317.1.5-2009: Electromagnetic compatibility of technical equipment. High power electromagnetic influences on civil systems. Basic provisions
GOST R 51317.3.2-2006: Electromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <=16 A per phase). Limits and test methods.
GOST R 51317.3.5-2006: Electromagnetic compatibility of technical equipment. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A. Limits and test methods
GOST R 51317.4.11-2007: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
GOST R 51317.4.2-2010: Electromagnetic compatibility of technical equipment. Electrostatic discharge immunity. Requirements and test methods.
GOST R 51317.4.30-2008: Electric energy. Electromagnetic compatibility of technical equipment. Power quality measurement methods
GOST R 51317.4.3-2006: Electromagnetic compatibility of technical equipment. Radio-frequency electromagnetic field immunity. Requirements and test methods.
GOST R 51317.4.34-2007: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity for equipment with input current more than 16 A per phase. Requirements and test methods
GOST R 51317.4.4-2007: Electromagnetic compatibility of technical equipment. Immunity to nanosecond impulsive disturbance. Requirements and test methods
GOST R 51317.4.7-2008: Electromagnetic compatibility of technical equipment. General guide on harmonics and interharmonics measuring instruments and measurement, for power supply systems and equipment connected thereto
GOST R 51317.6.1-2006: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in residential, commercial and light-industrial environments. Requiremеnts and test methods
GOST R 51317.6.2-2007: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in industrial environments. Requirements and test methods
GOST R 51317.6.3-2009: Electromagnetic compatibility of technical equipment. Electromagnetic disturbance from technical equipment intended for use in residential, commercial and light-industry environments Limits and test methods
GOST R 51317.6.4-2009: Electromagnetic compatibility of technical equipment. Electromagnetic disturbance from technical equipment intended for use in industry environments. Limits and test methods
GOST R 51317.6.5-2006: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in power stations and substations. Requirements and test methods
GOST R 51318.11-2006: Electromagnetic compatibility of technical equipment. Industrial, scientific, medical and domestic (ISMD) high-frequency equipment. Radio disturbance. Limits and methods of measurement
GOST R 51318.13-2006: Electromagnetic compatibility of technical equipment. Sound and television broadcast receivers and associated equipment. Radio disturbance. Limits and methods of measurement
GOST R 51318.16.1.1-2007: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Measuring apparatus
GOST R 51318.16.1.2-2007: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-2. Radio disturbance and immunity measuring apparatus and methods. Conducted radio disturbance measuring and immunity test apparatus
GOST R 51318.16.1.3-2007: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-3. Radio disturbance and immunity measuring apparatus. Disturbance power measuring apparatus
GOST R 51318.16.1.4-2008: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-4. Radio disturbance and immunity measuring apparatus. Radiated radio disturbance measuring and immunity test apparatus
GOST R 51318.16.2.1-2008: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-1. Methods of measurement of radio disturbances and immunity. Conducted radio disturbance measurements
GOST R 51318.16.2.3-2009: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of measurement of radio disturbances and immunity. Radiated radio disturbance measurements
GOST R 51318.16.2.4-2010: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-4. Methods of measurement of disturbances and immunity. Immunity parameters measurement
GOST R 51318.16.2.5-2011: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-5. In situ measurements of radio disturbance produced by physically large equipment
GOST R 51318.22-2006: Electromagnetic compatibility of technical equipment. Information technology equipment. Man-made radio disturbance. Limits and methods of measurement
GOST R 51321.3-2009: Low-voltage switchgear and control gear assemblies. Part 3. Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use and test methods
GOST R 51321.4-2011: Low-voltage switchgear and control gear assemblies. Part 4. Particular requirements for assemblies for construction sites (ACS)
GOST R 51322.1-2011: Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and methods of tests
GOST R 51324.1-2005: Switches for household and similar fixed electrical installations. General requirements and tests methods
GOST R 51327.1-2010: Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). Part 1. General rules and test methods
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51368-2011: Climatic environment endurance test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking
GOST R 51522.1-2011: Electromagnetic compatibility of technical equipment. Electrical equipment for measurement, control and laboratory use. Part 1. General requirements and test methods
GOST R 51522.2.1-2011: Electromagnetic compatibility of technical equipment. Electrical equipment for measurement, control and laboratory use. Part 2-1. Particular requirements for sensitive test and measurement equipment for EMC unprotected applications. Test configurations, operational conditions and performance criteria
GOST R 51522.2.2-2011: Electromagnetic compatibility of technical equipment. Electrical equipment for measurement, control and laboratory use. Part 2-2. Particular requirements for portable test, measuring and monitoring equipment used in low-voltage distribution systems. Test configurations, operational conditions and performance criteria
GOST R 51522.2.4-2011: Electromagnetic compatibility of technical equipment. Electrical equipment for measurement, control and laboratory use. Part 2-4. Particular requirements for insulation monitoring devices and insulation fault location equipment. Test configurations, operational conditions and performance criteria
GOST R 51526-2012: Electromagnetic compatibility of technical equipment. Arc welding equipment. Part 10. Requirements and test methods
GOST R 51558-2008: Security television means and systems. Classification. General technical requirements. Test methods
GOST R 51626-2000: Chemical (synthetic) fibres. Safety requirements
GOST R 51631-2008: Passenger lifts. Technical requirements of accessibility for persons including persons with disability
GOST R 51691-2008: Paint materials. Enamels. General specifications
GOST R 51725.0-2014: Catalogization of products for federal state needs. Complex of normative documents on catalogueing. General
GOST R 51725.10-2009: Catalogization of products for federal state needs. The order of products catalogization in accordance with requirement of agreements and contracts for products deliveries (purchase)
GOST R 51725.11-2009: Catalogization of products for federal state needs. The order of working-out, bringing into action and keeping the sections of the federal products catalogue for federal state needs
GOST R 51725.12-2009: Catalogization of products for federal state needs. The registration order for product researchers, manufacturers and suppliers of products for federal state needs
GOST R 51725.13-2012: Catalogization of products for federal state needs. Regulations of the catalogization centre of the state customer of products for federal state needs. Requirements for structure and content
GOST R 51725.16-2012: Catalogization of products for federal state needs. The order of formation, management and application of the Unified codifier and the list of the approved names of items of supply
GOST R 51725.3-2009: Catalogization of products for federal state needs. The order of item identification
GOST R 51725.9-2009: Catalogization of products for federal state needs. The order of formation and management of general part of the federal products catalogue for federal state needs
GOST R 51731-2010: Electromechanical contactors for household and similar purposes
GOST R 51761-2005: Aluminosilicate proppants. Specifications
GOST R 51769-2001: Resources saving. Waste Treatment. Documentation and regulation of dealing with production and consumption waste treating. Basic principles
GOST R 51814.5-2005: Management quality systems for automotive industry. Measurement systems analysis
GOST R 51814.6-2005: Management quality systems for automotive industry. Advanced product management in quality planning and control plan
GOST R 51814.7-2005: Management quality systems for automotive industry. Management quality systems analysis
GOST R 51844-2009: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods
GOST R 51876-2008: Series 1 freight containers. Technical requirements and test methods. Part 1. General-purpose containers
GOST R 51891-2008: Series 1 freight containers. Fittings. Specifications
GOST R 51897-2011: Risk management. Terms and definition
GOST R 51901.10-2009: Risk management. Fire risk management in enterprise
GOST R 51901.11-2005: Risk management. Hazard and operability studies. Application guide
GOST R 51901.12-2007: Risk management. Procedure for failure mode and effects analysis
GOST R 51901.14-2007: Risk management. Reliability block diagram and Boolean methods
GOST R 51901.3-2007: Risk management. Guidelines for dependability management
GOST R 51901.5-2005: Risk management. Guide for application of analysis techniques for dependability
GOST R 51925-2011: Gasolines. Determination of manganese by method of atomic absorption spectroscopy
GOST R 51942-2010: Gasolines. Determination of lead by method of atomic absorption spectrometry
GOST R 51992-2011: Low-voltage surge protective devices. Part 1. Surge protective devices connected to low-voltage power distribution systems. Technical requirements and test methods
GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52050-2006: Aviation turbine fuel Jet A-1. Specifications
GOST R 52065-2007: Caplights for use in mines susceptible to firedamp. Part 1. General requirements and testing methods in relation to the risk of explosion
GOST R 52066-2007: Caplights for use in mines susceptible to firedamp. Part 2. Performance and other safety-related matters
GOST R 52106-2003: Resources saving. General
GOST R 52107-2003: Resources saving. Classification and definition of indices
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 52152-2003: Long wall powered roof chocks. Basic parameters. General technical requirements. Test methods
GOST R 52161.2.11-2005: Safety of household and similar electrical appliances. Part 2.11. Particular requirements for tumble dryers
GOST R 52161.2.17-2009: Safety of household and similar electrical appliances. Part 2.17. Particular requirements for blankets, pads, clothing and similar flexible heating appliances
GOST R 52161.2.21-2006: Safety of household and similar electrical appliances. Part 2.21. Particular requirements for storage water heaters
GOST R 52161.2.2-2005: Safety of household and similar electrical appliances. Part 2.2. Particular requirements for vacuum cleaners and water-suction cleaning appliances
GOST R 52161.2.23-2007: Safety of household and similar electrical appliances. Part 2.23. Particular requirements for skin or hair care devices
GOST R 52161.2.24-2007: Safety of household and similar electrical appliances. Part 2.24. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
GOST R 52161.2.27-2008: Safety of household and similar electrical appliances. Part 2.27. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
GOST R 52161.2.29-2007: Safety of household and similar electrical appliances. Part 2.29. Particular requirements for battery chargers
GOST R 52161.2.31-2007: Safety of household and similar electrical appliances. Part 2.31. Particular requirements for range hoods
GOST R 52161.2.32-2008: Safety of household and similar electrical appliances. Part 2.32. Particular requirements for massage appliances
GOST R 52161.2.35-2008: Safety of household and similar electrical appliances. Part 2.35. Particular requirements for instantaneous water heaters
GOST R 52161.2.41-2008: Safety of household and similar electrical appliances. Part 2.41. Particular requirements for pumps
GOST R 52161.2.43-2008: Safety of household and similar electrical appliances. Part 2.43. Particular requirements for clothes dryers and towel rails
GOST R 52161.2.44-2008: Safety of household and similar electrical appliances. Part 2.44. Particular requirements for ironers
GOST R 52161.2.51-2008: Safety of household and similar electrical appliances. Part 2.51. Particular requirements for stationary circulation pumps for heating and service water installations
GOST R 52161.2.5-2005: Safety of household and similar electrical appliances. Part 2.5. Particular requirements for dishwashers
GOST R 52161.2.59-2008: Safety of household and similar electrical appliances. Part 2.59. Particular requirements for insect killers
GOST R 52161.2.60-2011: Safety of household and similar electrical appliances. Part 2.60. Particular requirements for whirlpool baths and whirlpool spas
GOST R 52161.2.6-2006: Safety of household and similar electrical appliances. Part 2.6. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
GOST R 52161.2.65-2008: Safety of household and similar electrical appliances. Part 2.65. Particular requirements for air-cleaning appliances
GOST R 52161.2.74-2008: Safety of household and similar electrical appliances. Part 2.74. Particular requirements for portable immersion heaters
GOST R 52161.2.9-2006: Safety of household and similar electrical appliances. Part 2.9. Particular requirements for grills, toasters and similar portable cooking appliances
GOST R 52161.2.96-2006: Safety of household and similar electrical appliances. Part 2.96. Particular requirements for flexible sheet heating elements for room heating
GOST R 52167-2012: Children's playgrounds equipment and surfacing. Swing's safety of structure and test methods. General requirements
GOST R 52168-2012: Children’s playgrounds equipment and surfacing. Safety of structure and test methods for slides. General requirements
GOST R 52212-2004: Shooting-galleries. Armoured protection and technical resistance to burglary. General technical requirements
GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators
GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements
GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'
GOST R 52350.14-2006: Electrical apparatus for explosive gas atmospheres. Part 14. Electrical installations in hazardous areas (other than mines)
GOST R 52350.19-2007: Explosive atmospheres. Part 19. Electric equipment repair, overhaul and reclamation
GOST R 52350.26-2007: Explosive atmospheres. Part 26. Equipment with equipment protection level (EPL) Ga
GOST R 52350.29.1-2010: Explosive atmospheres. Part 29-1. Gas detectors. General technical requirements and test methods for the detectors for flammable gases
GOST R 52350.29.2-2010: Explosive atmospheres. Part 29-2. Gas detectors. Requirements to the selection, installation, use and maintenance of detectors for flammable gases and oxygen
GOST R 52350.29.4-2011: Explosive atmospheres. Part 29-4. Gas detectors. General technical requirements and test methods of open path detectors for flammable gases
GOST R 52354-2005: Articles from paper of domestic and sanitary purposes. General specifications
GOST R 52366-2005: Rough tyres for locomotives on broad gauge railways. Types and dimensions
GOST R 52368-2005: Diesel fuel EVRO. Specifications
GOST R 52370-2005: Natural diamond powders. Specifications
GOST R 52373-2005: Insulated and protected wires for overhead power lines. General specifications
GOST R 52376-2005: Heat-resistant spiral-wound gaskets. Types. Main dimensions
GOST R 52382-2005: Passenger lifts. Fire-fighters lifts
GOST R 52382-2010: Passenger lifts. Fire-fighters lifts
GOST R 52383-2005: Lifts. Fire safety
GOST R 52390-2005: Road vehicles. Disc wheels. Technical requirements and tests methods
GOST R 52406-2005: Water. Determination of oil products using gas chromatography method
GOST R 52407-2005: Drinking water. Methods of hardness determination
GOST R 52419-2005: Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications
GOST R 52422-2005: Trucks and trailers. The spray-suppression systems. Technical requirements and test methods
GOST R 52426-2005: Drinking water. Detection and enumeration of Escherichia coli and coliform bacteria. Part 1. Membrane filtration method
GOST R 52433-2005: Vehicles. Ball-and-socket hinges. Technical requirements and test methods
GOST R 52434-2005: Active infra-red detectors. General technical requirements and test methods
GOST R 52435-2005: Technical means of intruder alarm systems. Classification. General technical requirements and test methods
GOST R 52436-2005: Control equipment of intruder and intruder-fire alarm systems. Classification. General technical requirements and test methods
GOST R 52437-2005: Equipment for bank protection. Deposit and personal safes. General specifications
GOST R 52439-2005: Digital terrain models. Feature catalogue. Requirements for structure
GOST R 52440-2005: Digital terrain models. General requirements
GOST R 52442-2005: Pneumatic stopper drills. General technical requirements
GOST R 52443-2005: Pneumatic rock drills. General technical requirements
GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods
GOST R 52452-2005: Vehicles. Pipes and hoses of hydraulic and pneumatic transmissions of brakes. Technical requirements and test methods
GOST R 52453-2005: Vehicles. Steering devices with the hydraulic boosters and steering hydraulic boosters. Technical requirements and test methods
GOST R 52454-2005: Global navigation satellite system and global position system. Personal receiver. Technical requirements
GOST R 52455-2005: Global navigation satellite system and global position system. General-purpose maritime receiver equipment. Technical requirements
GOST R 52456-2005: Global navigation satellite system and global position system. Individual receiver equipment for automobile transport. Technical requirements
GOST R 52457-2005: Global navigation satellite system. Consumers instrumentation. Classification
GOST R 52459.10-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 10. Specific requirements for first and second generation cordless telephone equipment
GOST R 52459.11-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 11. Specific requirements for terrestrial sound broadcasting service transmitters
GOST R 52459.1-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 1. General technical requirements and test methods
GOST R 52459.12-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 12. Specific requirements for very small aperture terminal, satellite earth stations operated in the frequency ranges between 4 GHz and 30 GHz in the fixed satellite
GOST R 52459.13-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 13. Specific requirements for private radio equipment operating at frequencies between 26965 kHz and 27860 kHz and ancillary equipment
GOST R 52459.14-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 14. Specific requirements for analogue and digital terrestrial TV broadcasting service transmitters
GOST R 52459.15-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 15. Specific requirement for commercially available amateur radio equipment
GOST R 52459.16-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 16. Specific requirements for analogue cellular radiocommunication equipment, mobile and portable
GOST R 52459.18-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 18. Specific requirement for terrestrial trunked radio (TETRA) equipment
GOST R 52459.19-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 19. Specific requirements for mobile receive only earth stations operating in the 1,5 GHz band providing data communications
GOST R 52459.20-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 20. Specific requirements for earth stations used in the mobile satellite services
GOST R 52459.2-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 2. Specific requirements for radio paging equipment
GOST R 52459.22-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 22. Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment
GOST R 52459.23-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 23. Specific requirements for IMT-2000 CDMA direct spread base station, repeater and ancillary equipment
GOST R 52459.24-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 24. Specific requirements for IMT-2000 CDMA direct spread mobile and portable radio and ancillary equipment
GOST R 52459.25-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 25. Specific requirements for CDMA 1x spread spectrum mobile stations and ancillary equipment
GOST R 52459.26-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 26. Specific requirements for CDMA 1x spread spectrum base stations, repeaters and ancillary equipment
GOST R 52459.27-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 27. Specific requirements for ultra-low power active medical implants and related peripheral devices
GOST R 52459.28-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 28. Specific requirements for wireless equipment of digital video links
GOST R 52459.31-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 31. Specific requirements for equipment in 9 kHz to 315 kHz band for ultra-low power active medical implants and related peripheral devices
GOST R 52459.3-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 3. Specific requirements for short-range devices operating at frequencies between 9 kHz and 40 GHz
GOST R 52459.32-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 32. Specific requirements for radar equipment for ground and wall probing
GOST R 52459.4-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 4. Specific requirements for radio equipment of fixed service stations and ancillary equipment
GOST R 52459.5-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 5. Specific requirements for private land mobile radio and ancillary equipment
GOST R 52459.6-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 6. Specific requirements for digital enhanced cordless telecommunications (DECT) equipment
GOST R 52459.7-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 7. Specific requirements for mobile and portable radio and ancillary equipment of digital cellular telecommunication systems (GSM and DCS)
GOST R 52459.8-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 8. Specific requirements for GSM base stations
GOST R 52459.9-2009: Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 9. Specific requirements for wireless microphones, similar radio frequency audio link equipment, cordless audio and in-ear monitoring devices
GOST R 52465-2005: Sunflower oil. Specifications
GOST R 52485-2005: Paint materials. Determination of volatile organic compound (VOC) content. Difference method
GOST R 52486-2005: Paint materials. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
GOST R 52486-2010: Paint materials. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
GOST R 52487-2005: Paint materials. Determination of non-volatile-matter mass fraction
GOST R 52487-2010: Paint materials. Determination of non-volatile-matter mass fraction
GOST R 52489-2005: Paint materials. Colorimetry. Part 1. Principles
GOST R 52490-2005: Paint materials. Colorimetry. Part 3. Calculation of colour differences
GOST R 52491-2005: Coating materials, used in building. General specifications
GOST R 52495-2005: Social service of the population. Terms and definitions
GOST R 52498-2005: Social service of the population. Classification of the organisms for the social service
GOST R 52499-2005: Food additives. Terms and definitions
GOST R 52501-2005: Water for analytical laboratory use. Specifications
GOST R 52502-2005: Venetian blinds-rollets. General specifications
GOST R 52502-2012: Venetian metals blinds-rollets. Specifications
GOST R 52503-2005: Venetian blinds-rollets. Methods of testing for resistance to burglary and bullet-proofing
GOST R 52505-2005: Electromagnetic compatibility of technical equipment. Lifts, escalators and moving walks. Immunity
GOST R 52506-2005: Electromagnetic compatibility of technical equipment. Lifts, escalators and moving walks. Emission
GOST R 52508-2005: Vehicles for transporting of the cash money and the valuable items. Requirements for colours diagrams, identification symbols and inscriptions
GOST R 52517-2005: Reciprocating internal combustion engines. Performance. Part 1. Declarations of power, fuel and lubricating oil consumptions, and test method. Additional requirements for engines for general use
GOST R 52525-2006: Sealing devices. Composition and requirements for sealing systems
GOST R 52526-2006: Gas turbine driven sets based on convertible aviation engines. Condition monitoring by measurements of vibration on non-rotating parts
GOST R 52527-2006: Gas turbine plants. Reliability, availability, maintainability and safety
GOST R 52530-2006: Automotive gasolines. Photocolorimetric method of iron determination
GOST R 52531-2006: Petroleum distillates. Determination of methyl tertiarybutyl ether chromatography method
GOST R 52532-2006: Base oils. Gas chromatographic method for determination of N-methylpyrrolidone
GOST R 52535.1-2006: Identification cards. Machine readable travel documents. Part 1. Machine readable passports
GOST R 52535.2-2006: Identification cards. Machine readable travel documents. Part 2. Machine readable visas
GOST R 52535.3-2006: Identification cards. Machine readable travel documents. Part 3. Machine readable official travel documents
GOST R 52537-2006: Manufacturing of medicinal product. Quality assurance system. General requirements
GOST R 52538-2006: Clean rooms. Technological garments. General requirements
GOST R 52539-2006: Air cleanliness in hospitals. General requirements
GOST R 52542-2006: Refractories. Methods for determination of thermal resistance with cooling by compressed air
GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
GOST R 52545.2-2012: Rolling bearings. Measuring methods for vibration. Part 2. Radial and angular ball bearings
GOST R 52545.3-2011: Rolling bearings. Measuring methods for vibration. Part 3. Radial spherical and tapered roller bearings
GOST R 52549-2006: Quality and safety management system in manufacturing of electric equipment
GOST R 52555-2006: Electricity metering equipment. Dependability. Part 11. General concepts
GOST R 52559-2006: Engine oils. Method for determination of apparent viscosity at temperatures between -5 °C and -35 °C using the cold-cranking simulator
GOST R 52560-2006: Climatic environment stability test methods for machines, instruments and other industrial products. Test methods for dust (sand) influence
GOST R 52561-2006: Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for influence of shocks by free fall, shocks by drop on account of topple, influence of rocking and prolonged pitches
GOST R 52562-2006: Climatic environment stability test methods for machines, instruments and other industrial products. Test methods for water influence
GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications
GOST R 52569-2006: Frits. Specifications
GOST R 52571-2006: Geographical information systems. Spatial data compatibility. General requirements
GOST R 52575-2006: General use highways. Road marking materials. Technical requirements
GOST R 52576-2006: General use highways. Road marking materials. Test methods
GOST R 52577-2006: General use highways. Methods for determination of parameters of highways geometric elements
GOST R 52587-2006: Abrasive tools. Designations and hardness test methods
GOST R 52588-2006: Abrasive tools. Safety requirements
GOST R 52589-2006: Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements
GOST R 52590-2006: Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements
GOST R 52597-2006: Brass rods for free machining purposes. Specifications
GOST R 52598-2006: Rolling bearings. Radial and angular contact bearings. Boundary dimensions. General plan
GOST R 52605-2006: Traffic control devices. Road bumps and road humps. General technical requirements. Application rules
GOST R 52606-2006: Traffic control devices. Classification of barriers
GOST R 52607-2006: Traffic control devices. Roadside barriers. General technical requirements
GOST R 52609-2006: Hard coals. Method for determination of the IGI-VUHIN swelling value
GOST R 52615-2006: Compressors and vacuum pumps. Safety requirements. Part 2. Vacuum pumps
GOST R 52617-2006: Glass containers for milk and milk products. Specifications
GOST R 52624-2006: Passenger lifts. Requirements for vandal resistance
GOST R 52625-2006: Lifts. Landing doors. Fire resistance test methods
GOST R 52626-2006: Lifts. Methodology of improvement assessment and of safety of existing lifts
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52628-2006: Nuts. Mechanical properties and test methods
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52633.0-2006: Information protection. Information protection technology. Requirements to the means of high-reliability biometric authentication
GOST R 52633.1-2009: Information protection. Information protection technology. Requirements for creation procedures for bases of natural biometric images, intended for high-reliability biometric authentication means testing
GOST R 52637-2006: Means of saving of crews of underwater objects, lying on the bottom. Classification
GOST R 52638-2006: Saving means of crews of engineering installations operated in water areas. General technical requirements
GOST R 52639-2006: Open-circuit diving apparatus. General specifications
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.
GOST R 52650-2006: Combined microwave infra-red intrusion detectors for rooms. General technical requirements and test methods
GOST R 52651-2006: Microwave intrusion detectors for perimeters. General technical requirements and test methods
GOST R 52652-2006: Information and communication technologies in education. General
GOST R 52655-2006: Information and communication technologies in education. The integrated automated control system of the high professional educational system. General requirements
GOST R 52656-2006: Information and communication technologies in education. Federal level educational internet-portals. General requirements
GOST R 52657-2006: Information and communication technologies in education. Federal level educational internet-portals. Information resources system of heading
GOST R 52658-2006: Aviation turbine fuel. Method for determination of acid number
GOST R 52659-2006: Petroleum and petroleum products. Methods for manual sampling
GOST R 52660-2006: Automotive fuels. Method for determination of sulphur content by wavelength-dispersive X-ray fluorescence spectrometry
GOST R 52661-2006: Pulp, paper and board. Method for determination of total chlorine and organically bound chlorine content
GOST R 52662-2006: Paint materials. Colorimetry. Part 2. Colour measurement
GOST R 52663-2006: Paint materials. Method for determination of gloss of non-metallic paint films at 20°, 60° and 85°
GOST R 52664-2006: Welded pipe sheet piles. General specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52667-2006: Unmoulded refractories. Acceptance rules and methods of sampling
GOST R 52690-2006: Foods. Voltammetric method of vitamin C mass concentration determination
GOST R 52691-2006: Electromagnetic compatibility of technical equipment. Maritime navigation and radiocommunication equipment and systems. Requirements and test methods
GOST R 52692-2006: Shipbuilding. Ship screw propellers. Manufacturing tolerances. Part 1. Propellers of diameter greater than 2,5 м
GOST R 52693-2006: Shipbuilding. Ship screw propellers. Manufacturing tolerances. Part 2. Propellers of diameter between 0,8 and 2,5 m inclusive
GOST R 52694-2006: Shipbuilding. Ordinary rectangular windows. Positioning
GOST R 52695-2006: Shipbuilding. Side scuttles. Positioning
GOST R 52696-2006: Shipbuilding. Inland navigation ships. Raft-type life-saving apparatus
GOST R 52706-2007: Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
GOST R 52707-2007: Refractories for steel pouring. Refractory products for slide gates of casting ladles. Specifications
GOST R 52708-2007: Water. Method for determination of chemical oxygen demand
GOST R 52709-2007: Diesel fuels. Determination of cetane number
GOST R 52710-2007: Abrasive tools. Acoustic method for determination of hardness and sound indices by reduced acoustic wave velocity
GOST R 52714-2007: Motor gasolines. Determination of individual and group hydrocarbon composition by method of capillary gas chromatography
GOST R 52715-2007: Vacuum equipment. Pipeline fittings. Mounting dimensions
GOST R 52716-2007: Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication
GOST R 52717-2007: Work-place air. Determination of mass concentration of nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication
GOST R 52718-2007: Electricity metering equipment. Dependability. Part 21. Collection of meter dependability data from the field
GOST R 52719-2007: Power transformers. General specifications
GOST R 52720-2007: Pipeline valves. Terms and definitions
GOST R 52721-2007: Traffic control devices. Test methods for roadside barriers
GOST R 52722-2007: Digital broadcast television channels for studio and field production. Basic parameters and measuring methods
GOST R 52724-2007: Environmental management systems. General guidelines on creation, introduction and supporting techniques at the chemical weapons destruction facilities
GOST R 52724-2010: Environmental management systems. General guidelines on creation, introduction and supporting techniques at the chemical weapons destruction facilities
GOST R 52725-2007: Surge arresters for a.c. electrical installations for voltage from 3 kV to 750kV. General specifications
GOST R 52726-2007: Alternating current disconnectors and earthling switches for voltage above 1 kV and operating mechanisms for them. General specifications
GOST R 52727-2007: Technical diagnostics. Acoustic-emission diagnostics. General requirements
GOST R 52728-2007: Method of strain-and-temperature measurements in situ. General requirements
GOST R 52729-2007: Cryptocrystalline graphite. General specifications
GOST R 52730-2007: Drinking water. Methods for determination of 2,4-D
GOST R 52731-2007: Non-destructive testing. Stress evaluation by ultrasound. General requirements
GOST R 52733-2007: Ambient air. Determination of sulphur dioxide. Ultraviolet fluorescence method
GOST R 52734-2007: Sealing devices for dangerous goods. General technical requirements
GOST R 52735-2007: Short-circuits in electrical installations. Calculation methods in alternating current electrical installations with voltage above 1 kV
GOST R 52736-2007: Short-circuits in electrical installations. Calculation methods of electrodynamics and thermal effects of short-circuit current
GOST R 52738-2007: Milk and products of milk processing. Terms and definitions
GOST R 52740-2007: Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST R 52743-2007: Pumps and pump units for pumping of liquids. General safety requirements
GOST R 52744-2007: Submersible pumps and pump units. Safety requirements
GOST R 52745-2007: Complex quality control system. Quality control for materials and semi-finished products used in the process of production of articles of aviation, space and defence equipment and double application equipment at enterprises-suppliers. General requirements
GOST R 52747-2007: Vehicles. Antiskid studs. General specifications
GOST R 52748-2007: Automobile roads of the general use. Standard loads, loading systems and clearance approaches
GOST R 52749-2007: Assembly window joints with vapour-permeable and self-expanding tapes. Specifications
GOST R 52750-2007: Panic and emergency exit devices. Specifications
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 52752-2007: Formworks. Test methods
GOST R 52753-2007: Paint materials. Method for determination of fineness of grind
GOST R 52754-2007: Special purpose vehicles for use by the Federal Penitentiary Service and the Federal Bailiffs Service. Vehicles colour graphic schemes. Identification markings and signs. General requirements
GOST R 52755-2007: Liquid composite fuel. Specifications
GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting
GOST R 52761-2007: Transport packagings for radioactive materials. Types and procedure of tests, acceptance regulations
GOST R 52762-2007: Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for bumps to enclosure of products
GOST R 52763-2007: Climatic environment stability test methods for machines, instruments and other industrial products. Tests for exposure to salt mist
GOST R 52764-2007: Metallic materials. Method of bend test for sheets and strips 3 mm thick and less
GOST R 52765-2007: Automobile roads of the general use. Road facilities. Classification
GOST R 52766-2007: Automobile roads of general use. Road facilities. General requirements
GOST R 52767-2007: Automobile roads of the general use. Road facilities. Methods for determination of parameters
GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods
GOST R 52769-2007: Water. Methods for determination of colour
GOST R 52776-2007: Rotating electrical machines. Rating and performance
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
GOST R 52780-2007: Hardmetal burrs. Specifications
GOST R 52781-2007: Grinding and tool-grinding wheels. Specifications
GOST R 52782-2007: Gas turbines. Test methods. Acceptance tests
GOST R 52784-2007: Fibre flax. Terms and definitions
GOST R 52785-2007: Screwdrivers for fitting and assembling for recessed screws and wood screws. Working part. Dimensions
GOST R 52786-2007: Hinge and pliers tools. Safety requirements and methods of test
GOST R 52787-2007: Hinge and pliers tools. Technical requirements
GOST R 52796-2007: Empty enclosures for low-voltage switchgear and control gear assemblies. General requirements
GOST R 52797.1-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 1. Noise control strategies
GOST R 52797.2-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 2. Noise control measures
GOST R 52797.3-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 3. Sound propagation and noise prediction in workrooms
GOST R 52799-2007: Noise. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
GOST R 52800-2007: Noise. Coast-by methods for measurement of tyre-to-road sound emission
GOST R 52801-2007: Refractories for steel casting. Refractory products for continuous steel casting. Specifications
GOST R 52802-2007: Pelletized nickel-base superalloys. Grades
GOST R 52803-2007: Heat-insulating refractory products. Specifications
GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST R 52805-2007: Glass textile wall coverings. Specifications
GOST R 52806-2007: Project risk management. General
GOST R 52807-2007: Guidance for assessment of project management personnel competency
GOST R 52808-2007: Untraditional technologies. Energetics of bio wastes. Terms and definitions
GOST R 52823-2007: Food additives. Sodium phosphates E339. General specifications
GOST R 52846-2007: Lead-acid traction batteries. Part 1. Main requirements and test methods
GOST R 52847-2007: Vehicles. Brake gears. Technical requirements and machine testing methods
GOST R 52848-2007: Vehicles. Apparatus of air brake actuator. General technical requirements
GOST R 52849-2007: Vehicles. Chambers of pneumatic brake controls. Technical requirements and test methods
GOST R 52850-2007: Vehicles. Single-stage compressed air pumps. Technical requirements and test methods
GOST R 52851-2007: Commercial vehicles. Product data exchange between chassis and body works manufacturers. Dimensions of the chassis, necessary for the development of the body works. Reference designations
GOST R 52852-2007: Commercial vehicles. Product data exchange between chassis and body works manufacturers. General data, mass parameters, administrative information. Reference designations
GOST R 52853-2007: Passenger vehicles. Wheel guards. Technical requirements
GOST R 52854-2007: Bolts with star-type head and small flange. Specifications
GOST R 52855-2007: Bolts with star-type head and large flange. Specifications
GOST R 52856-2007: Vacuum equipment. Flange dimensions
GOST R 52857.10-2007: Vessels and apparatus. Norms and methods of strength calculation. Vessels and apparatus involving hydrogen sulphide media
GOST R 52857.11-2007: Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST R 52857.12-2007: Vessels and apparatus. Norms and methods of strength calculation. Requirements for representation of the strength calculations carried out on the computer
GOST R 52857.2-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric and conic, shells convex and flat bottoms and covers
GOST R 52857.3-2007: Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle
GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
GOST R 52857.5-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and heads from influence of support loads
GOST R 52857.6-2007: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation under low-cyclic loads
GOST R 52857.8-2007: Vessels and apparatus. Norms and methods of strength calculation. Jacketed vessels and apparatus
GOST R 52857.9-2007: Vessels and apparatus. Norms and methods of strength calculation. Determination of stresses at nozzle-to-shell and head junctions under action of pressure and external loads on the nozzle
GOST R 52859-2007: Rolling bearings. General specifications
GOST R 52860-2007: Physical protection systems. General technical requirements
GOST R 52862-2007: Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for acoustic noise (vibration, acoustic component)
GOST R 52863-2007: Protection of information. Protective automatically systems. Testing for stability to intentional power electromagnetic influence. General requirements
GOST R 52864-2007: Global navigation satellite system. Civil navigation receiver equipment for launchers, space tugs and space vehicles. Technical requirements
GOST R 52865-2007: Global navigation satellite system. Parameters radionavigation field. Technical requirements and test methods
GOST R 52865-2009: Global navigation satellite system. Parameters radionavigation field. Technical requirements and test methods
GOST R 52866-2007: Global navigation satellite system. Civil local area reference integrity monitoring station. Technical requirements
GOST R 52867-2007: Management environmental. Life cycle assessment. Examples of application of GOST R ISO 14041 to goal and scope definition and inventory analyses
GOST R 52868-2007: Cable tray systems and cable ladder systems for cable management. General technical requirements and test methods
GOST R 52870-2007: Image of information means for collective use. Requirements for visual image of information and measurement methods
GOST R 52874-2007: Special workplace for invalids on sight. The order of development and support
GOST R 52875-2007: Tactile ground indexes for invalids on sight. Technical requirements
GOST R 52876-2007: Services of the organizations of rehabilitation of invalids owing to operations and a military trauma. Basic rules
GOST R 52881-2007: Social service of the population. Types of establishments of social service of family and children
GOST R 52882-2007: Social service of the population. Special hardware of social service establishments
GOST R 52883-2007: Social service of the population. Requirements to the personnel of social service establishments
GOST R 52884-2007: Social service of the population. The order and conditions of granting the social services to elderly age citizens and invalids
GOST R 52885-2007: Social service of the population. Social services to family
GOST R 52886-2007: Social services of the population. Social services to women
GOST R 52887-2007: Services to children in establishments of rest and rehabilitation of health
GOST R 52887-2018: Services for children in organizations of rest and rehabilitation of health
GOST R 52888-2007: Social services of the population. Social services to children
GOST R 52889-2007: Non-destructive testing. Ultrasound measurement of screw tightening forces. General requirements
GOST R 52890-2007: Non-destructive testing. Evaluation of stresses in material of pipelines by ultrasound. General requirements
GOST R 52891-2007: Control of residual technological stresses by laser interferometrical method. General requirements
GOST R 52892-2007: Vibration and shock. Vibration of buildings. Measurement of vibration and evaluation of its effects on structure
GOST R 52893-2007: Noise of machines. Test code for the measurement of airborne noise emitted by private and professional power lawn mowers and lawn and garden tractors with mowing attachments
GOST R 52894.1-2007: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment
GOST R 52894.2-2007: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 2. Non-ducted indoor equipment
GOST R 52895-2007: Noise of machines. Acceptance test code gear units for airborne sound
GOST R 52901-2007: Corrugated board for products packaging. General specifications
GOST R 52902-2007: Complete filled transport packages. Water-spray resistance test methods
GOST R 52903-2007: Packs made of polymeric films and composite materials. General specifications
GOST R 52907-2008: Radioelectronics power supply. Terms and definitions
GOST R 52908-2008: Thermal insulating products for building applications. Method for determination of organic content
GOST R 52909-2008: Targets for stand shooting and sporting. General specifications
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 52911-2008: Solid mineral fuels. Methods for determination of total moisture
GOST R 52912-2008: Nominal diameters of components of vacuum systems. Series
GOST R 52913-2008: Polished diamonds. Classification. Technical requirements
GOST R 52914-2008: Tractor and combine harvester engines. Vibroacоustic characteristics and testing methods
GOST R 52915-2008: Automatic and semi-automatic metalforming machines. Safety requirements
GOST R 52916-2008: Stops of automatic coupler equipment for freight and passenger cars. General specifications.
GOST R 52917-2008: Solid mineral fuels. Methods for determination of moisture in the analysis test sample
GOST R 52918-2008: Refractories. Terms and definitions
GOST R 52920-2008: Wheelsets for the traction railway stock. Method of measuring the electrical resistance
GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications
GOST R 52923-2008: Vehicles. Unconstant velocity universal joints. General technical requirements and test methods
GOST R 52924-2008: Vehicles. Constant angular velocity universal joints. General technical requirements and test methods
GOST R 52925-2008: Space technology items. General requirements for mitigation of near-earth space debris population
GOST R 52926-2008: Vehicles. Joint drive shafts of cars. General technical requirements and test methods
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 52928-2008: Global navigation satellite system. Terms and definitions
GOST R 52928-2010: Global navigation satellite system. Terms and definitions
GOST R 52929-2008: Railway traction stock. Methods of controlling braking distance and parking brake
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 52932-2008: Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications
GOST R 52933-2008: Capacitance intrusion detectors for rooms. General technical requirements and test methods
GOST R 52935-2008: Means of illumination of diving pressure chambers bulk holds and rigid diving devices. General specifications
GOST R 52936-2008: Frее-flow diving suits. General technical requirements
GOST R 52937-2008: Wire diving communications facility. General specifications
GOST R 52939-2008: Goods non-enriched iron ores. General specifications
GOST R 52941-2008: Passenger lifts. Planning and selection for residential buildings
GOST R 52942-2008: Railway applications. Axles. Product requirements.
GOST R 52944-2008: Live-cycle of railway rolling stock. Terms and definitions
GOST R 52945-2008: Rectified ethanol. Spectral-luminescent method of identification
GOST R 52946-2008: Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method
GOST R 52947-2008: Petroleum products. Determination of knock characteristics of motor fuels. Research method
GOST R 52948-2008: Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications
GOST R 52949-2008: Fittings-adapters from copper and copper alloys for connecting the pipelines. Specifications
GOST R 52950-2008: Palladium. Method for determination of mass loss after ignition
GOST R 52951-2008: Palladium. Methods of arc atomic-emission analysis
GOST R 52952-2008: Cosmetic gels. General specifications
GOST R 52953-2008: Thermal insulating materials and products. Terms and definitions
GOST R 52954-2008: Petroleum products. Determination of thermal oxidation stability of gas turbine fuels. JFTOT method
GOST R 52955-2008: Solders for capillary soldering of fittings from copper and copper alloys for connecting the pipelines systems. Grades
GOST R 52956-2008: Hard magnetic sintered materials on basis neodymium-iron-boron alloys. Classification. Main parameters
GOST R 52962-2008: Water. Methods for determination of chromium (VI) and total chromium
GOST R 52963-2008: Water. Methods for determination of alkalinity, and mass concentration of carbonates and hydrocarbonates
GOST R 52964-2008: Drinking water. Methods for determination of sulphate content
GOST R 52965-2008: Cylindrical shanks for milling cutters. Basic dimensions
GOST R 52966-2008: Subland twist drills for holes prior to tapping screw threads. Basic dimensions
GOST R 52967-2008: Dovetail slot single angle milling cutters. Dimensions
GOST R 52980-2008: Functional safety of electrical, electronic, programmable electronic safety-related systems applications for Railways. Software requirements
GOST R 52985-2008: Ecological safety of rocket-space technique. General technical requirement
GOST R 52987-2008: Acoustics. Determination of noise performance for air-terminal devices. Precision methods for anechoic rooms
GOST R 52988-2008: Noise of machines. Reciprocating internal combustion engine driven alternating current generating sets. Measurement of airborne noise by the enveloping surface method
GOST R 52990.1-2008: Noise of machines. Textile machinery. Noise test code. Part 1. Common requirements
GOST R 52990.4-2010: Noise of machines. Textile machinery. Noise test code. Part 4. Yarn processing, cordage and rope manufacturing machinery
GOST R 52991-2008: Water. Methods for determination of total and dissolved organic carbon
GOST R 52997-2008: Chrysotil. Acceptance rules, methods of sampling and preparation of samples for tests
GOST R 52998-2008: Copper concentrate. Specifications
GOST R 53001-2008: Diamond and cubic boron nitride (elbow) tools. Safety requirements
GOST R 53002-2008: End mills with cylindrical, Morse taper and 7:24 taper shanks. Dimensions
GOST R 53003-2008: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications
GOST R 53004-2008: T-slot cutters. Specifications
GOST R 53006-2008: Estimation of potential dangerous objects lifetime on the basis of express methods
GOST R 53007-2008: Paint materials. Rapid deformation (impact resistance) test method
GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction
GOST R 53010-2008: Hydraulic presses. Safety requirements
GOST R 53028-2008: Technological foundry equipment. Noise characteristics and methods of control
GOST R 53030-2008: Cotton fibre. Methods for determination of mould contamination
GOST R 53032-2008: Noise of machines. Measurement of noise emitted by information technology and telecommunications equipment
GOST R 53033-2008: Horn type loudspeakers. General specifications
GOST R 53037-2008: Mobile elevating work platforms. Design calculations, safety requirements, tests
GOST R 53064-2017: Social service of the population. Types of social service establishments and social services to persons without the certain residence and employment
GOST R 53065.1-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 1. Test without packings
GOST R 53065.2-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 2. Test with packings
GOST R 53066-2008: Refractories for steel pouring. Stopper refractories. Specifications
GOST R 53073-2008: High-pressure sodium vapour lamps. Performance requirements
GOST R 53074-2008: High-pressure mercury vapour lamps. Performance requirements
GOST R 53075-2008: Metal halide lamps. Performance requirements
GOST R 53076-2008: Railway transport. Structural requirements of railway vehicle bodies
GOST R 53077-2008: Railway applications. Rules of designing and testing the bogie frame structures
GOST R 53080-2008: Vibration. Testing of mobile machinery in order to determine the vibration emission value. Industrial trucks
GOST R 53081-2008: Vibration. Assessment of exposure to hand-transmitted vibration using information on vibration emitted by machines
GOST R 53091-2008: Soil quality. Sampling. Part 3. Guidance on safety
GOST R 53112-2008: Information protection. Facilities for measuring side electromagnetic radiation and pickup parameters. Technical requirements and test methods
GOST R 53114-2008: Protection of information. Information security provision in organizations. Basic terms and definitions
GOST R 53115-2008: Information protection. Conformance testing of technical information processing facilities to unauthorized access protection requirements. Methods and techniques
GOST R 53123-2008: Soil quality. Sampling. Part 5. Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination
GOST R 53131-2008: Information protection. Guidelines for recovery services of information and communications technology security functions and mechanisms. General
GOST R 53148-2008: Rotating electrical machines. Noise limits
GOST R 53165-2008: Lead-acid storage starter batteries for motor-tractors. General specifications
GOST R 53166-2008: Influence of environmental conditions appearing in nature on the technical products. Overall performance. Earthquakes
GOST R 53167-2008: Methods for determination of endurance of polymer electrical insulation materials and systems by means of acceleration tests in chemically active media. General requirements. Materials and insulation systems for low-voltage electrical products tests
GOST R 53168-2008: Chayka' radionavigation system. Transmitter signals. Specifications
GOST R 53169-2008: Chayka' radionavigation system. Format of reference data transmission for global navigational satellite systems users. General technical requirements
GOST R 53170-2008: Automobile roads of general use. Road marking wares. Preformed road markings. Technical requirements
GOST R 53171-2008: Automobile roads of general use. Road marking wares. Preformed road markings. Methods of checking
GOST R 53172-2008: Automobile roads of general use. Road marking wares. Glass beads. Technical requirements
GOST R 53173-2008: Automobile roads of the general using. Road marking wares. Glass beads. Test methods
GOST R 53174-2008: Electric generating plants with diesel and gas internal combustion engines. General specifications
GOST R 53175-2008: Electric generating plants with gasoline internal combustion engines. General specifications
GOST R 53176-2008: Electric generating plants with gasoline, diesel and gas internal combustion engines. Reliability indexes. Requirements and test methods
GOST R 53178-2008: Electric generating plants with gasoline, diesel and gas internal combustion engines. Test methods
GOST R 53183-2008: Foodstuffs. Determination of trace elements. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion
GOST R 53187-2008: Acoustics. Noise monitoring of cities
GOST R 53188.1-2008: Sound level meters. Part 1. Technical requirements
GOST R 53188.2-2010: State system for ensuring the uniformity of measurements. Sound level meters. Part 2. Test methods
GOST R 53188.3-2010: State system for ensuring the uniformity of measurements. Sound level meters. Part 3. Verification procedure
GOST R 53189-2008: Environmental dynamic test methods for machines, instruments and other technical articles. Mixed mode vibration tests
GOST R 53190-2008: Environmental dynamic test methods for machines, instruments and other technical articles. Shock tests with shock response spectrum synthesis
GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53195.1-2008: Functional safety of building/erection safety-related systems. Part 1. General
GOST R 53195.2-2008: Functional safety of building/erection safety-related systems. Part 2. General requirements
GOST R 53195.3-2009: Function safety of building/erection safety related systems. Part 3. Requirements for systems
GOST R 53195.5-2010: Functional safety of building/erection safety-related systems. Part 5. Techniques and measures on risk reduction, estimation methods
GOST R 53196-2008: Jewellery. Gold alloy coatings
GOST R 53197-2008: Jewellery. Fineness of precious metal alloys
GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis
GOST R 53199-2008: Ethanol fuel. Determination of ethanol content by method of gas chromatography
GOST R 53200-2008: Denatured fuel bioethanol. Specifications
GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications
GOST R 53202-2008: Paint materials being in contact with food products. General specifications
GOST R 53203-2008: Petroleum products. Determination of sulphur by method of wavelength dispersive X-ray fluorescence spectrometry
GOST R 53204-2008: Non-destructive testing. Alternating stress evaluation by ultrasound. General requirements
GOST R 53205-2008: Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements
GOST R 53206-2008: Paper for corrugating. Specifications
GOST R 53207-2008: Cardboard for plain layers of corrugated cardboard. Specifications
GOST R 53208-2008: Monostructural fibreboards. Specifications
GOST R 53210-2008: Composite containers. General specifications
GOST R 53211-2008: Composite containers for dangerous cargoes. Test methods
GOST R 53214-2008: Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
GOST R 53217-2008: Soil quality. Determination of organochlorine pesticides and polychlorinated biphenyls content. Gaschromatographic method with electron capture detection
GOST R 53219-2008: Soil quality. Determination of nitrogen in air-dry soils using calcium chloride solution
GOST R 53223-2008: Chrysotile cement slabs for wall facing. Specifications
GOST R 53226-2008: Nonwoven fabrics. Methods of strength determination
GOST R 53227-2008: Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of deformation and strength properties
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53229-2008: Conformity assessment. Rules for conducting the works related to conformity assessment of automobile and aviation gasoline, diesel and marine fuel, jet aircraft fuel and residual oil
GOST R 53231-2008: Concretes. Rules for control and assessment of strength
GOST R 53233-2008: Cotton fibre. Methods of determination of moisture
GOST R 53236-2008: Cotton fibre. Methods of sampling
GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application
GOST R 53238-2008: Geotextiles and geotextile related products. Metod for determination of the opening size characteristic
GOST R 53239-2008: Underground storages of hydrocarbons. Monitoring rules for construction and operation
GOST R 53240-2008: Oil and gas exploratory wells. Rules of testing
GOST R 53241-2008: Marine geological exploration. Requirements for protection of marine environment under exploration and development of oil gas fields in continental shelf, territorial sea and littoral area
GOST R 53247-2009: Fire-fighting technics. Fire-engine vehicles. Classification, types and designations
GOST R 53249-2009: Fire-fighting equipment. Sleeved water collecting. General technical requirements. Methods of testing
GOST R 53250-2009: Fire-fighting equipment. Fire standpipe. General technical requirements. Methods of testing
GOST R 53251-2009: Fire-fighting equipment. Hand foam-nozzles. General technical requirements. Methods of testing
GOST R 53252-2009: Fire-fighting equipment. Foam mixers. General technical requirements. Methods of testing
GOST R 53253-2009: Fire-fighting equipment. Suction gauzes. General technical requirements. Methods of testing
GOST R 53254-2009: The firefighting equipment. Stationary external fire ladders. Buildings roof railings. General technical requirements. Test methods
GOST R 53255-2009: Fire equipment. Self-contained open-circuit compressed air breathing apparatus. General technical requirements. Test methods
GOST R 53256-2009: Fire equipment. Self-contained closed-circuit breathing apparatus with compressed oxygen. General technical requirements. Test methods
GOST R 53257-2009: Fire equipment. Full face masks breathing apparatus. General technical requirements. Test methods
GOST R 53258-2009: Fire equipment. The small size cylinders for apparatuses breathing and self-contained escape with compressed air. General technical requirements. Test methods
GOST R 53259-2009: Fire equipment. Self-contained escape with compressed air for protection of the people against toxic products at evacuation from smoking buildings from fire. General technical requirements. Test methods
GOST R 53260-2009: Fire equipment. Self-contained escape with chemical oxygen for protection of the people against toxic products at evacuation from smoking buildings from fire. General technical requirements. Test methods
GOST R 53261-2009: Fire equipment. Filter self-rescue for protection of people against toxic products at evacuation from smoking buildings from fire. General technical requirements. Test methods
GOST R 53262-2009: Fire equipment. Devices for control breathing apparatuses. General technical requirements. Test methods
GOST R 53263-2009: Fire equipment. Compressor unit for filling of low-volume bottles with compress air breathing apparatus for fireman. General technical requirements. Test methods
GOST R 53264-2009: Fire equipment. Special clothing for fire-fighter. General technical requirements. Test methods
GOST R 53265-2009: Mean of individual defence of feet for fire-fighter. General technical requirements. Test methods
GOST R 53266-2009: Fire equipment. Fire saving cord. General technical requirements. Test methods
GOST R 53267-2009: Fire equipment. Fire snap hook. General technical requirements. Test methods
GOST R 53268-2009: Fire equipment. Fire safety belt. General technical requirements. Test methods
GOST R 53269-2009: Fire equipment. Helmets for fire-fighters. General technical requirements. Test methods
GOST R 53270-2009: Fire equipment. Fire lantern. General technical requirements. Test methods
GOST R 53271-2009: Fire equipment. Fire escape chute. General technical requirements. Test methods
GOST R 53272-2009: Fire equipment. Fire rope descanters. General technical requirements. Test methods
GOST R 53273-2009: Fire equipment. Fire jumping down rescue devices. General technical requirements. Test methods
GOST R 53274-2009: Fire equipment. Fire rescue chute. General technical requirements. Test methods
GOST R 53275-2009: Fire equipment. Fire department hand-operated ladders. General technical requirements. Test methods
GOST R 53276-2009: Fire equipment. Hanging ladders for rescue from height. General technical requirements. Test methods
GOST R 53277-2009: Fire equipment. Equipment for maintenance of fire hoses. General technical requirements. Methods of testing
GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods
GOST R 53279-2009: Fire equipment. Fire connecting heads. General technical requirements. Methods of testing
GOST R 53280.1-2010: Automatic fire extinguishing systems. Fire extinguishing media. Part 1. Foam fire extinguishing concentrates for surface application to water - miscible liquids. General technical requirements and test methods
GOST R 53280.2-2010: Automatic fire extinguishing systems. Fire extinguishing media. Part 2. Foams concentrate for subsurface extinguishing of fires oil and petroleum tanks. General technical requirements and test methods
GOST R 53280.3-2009: Automatic fire extinguishing systems. Fire extinguishing media. Part 3. Gaseous extinguishing media. Test methods
GOST R 53280.4-2009: Automatic fire extinguishing systems. Extinguishing medium. Part 4. Dry fire extinguishing powders. General technical requirements and test methods
GOST R 53280.5-2009: Automatic fire extinguishing systems. Extinguishing medium. Part 5. Special dry fire extinguishing powders. Classification, general technical requirements. Test methods
GOST R 53281-2009: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods
GOST R 53282-2009: Automatic gas fire extinguishing systems. Isothermal tanks. General technical requirements. Test methods
GOST R 53283-2009: Automatic gas fire extinguishing systems. Distributing valves. General technical requirements. Test methods
GOST R 53284-2009: Fire engineering. Generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53285-2009: Fire engineering. Portable generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods
GOST R 53287-2009: Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods
GOST R 53288-2009: Automatic water and foam extinguishers systems. Automatic fire water mist spray extinguishers systems. Modules. General technical requirements. Test methods
GOST R 53289-2009: Ceiling type water sprinklers (concealed, flush and recessed). Fire sensitivity test
GOST R 53290-2009: Fire engineering. Foam fire-extinguishing installations. Low expansion foam generators for subsurface extinguishing in tanks. General technical requirements. Test methods
GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods
GOST R 53292-2009: Fire retardant compositions and substances for wood. General requirements. Test methods
GOST R 53293-2009: Fire hazard of substances and materials. Materials, substance and fire protective means. Identification by thermal analysis methods
GOST R 53294-2009: Textile materials. Bedding articles. Upholstered furniture. Blinds. Curtains. Flammability test methods
GOST R 53295-2009: Fire retardant compositions for steel constructions. General requirement. Method for determining fire retardant efficiency
GOST R 53296-2009: Fire fighting lifts placing. Requirements of fire safety
GOST R 53298-2009: Suspended ceilings. Fire resistance test method
GOST R 53299-2009: The test method for the fire resistance. Ventilation ducts
GOST R 53300-2009: The smoke control systems of buildings. Methods of acceptance and routine tests
GOST R 53301-2009: Fire dampers of ventilation systems. The test method for the fire resistance
GOST R 53302-2009: The equipment of smoke control systems. The test method for the fire resistance
GOST R 53303-2009: Building constructions. Fire doors and gates. Test methods for smoke-and-gas leakage
GOST R 53304-2009: Trunks of refuse chutes. The test method on fire resistance
GOST R 53305-2009: Smoke shields. The test method for the fire resistance
GOST R 53306-2009: Enclosing building structures crossing junction points by using pipe, which is made of polymeric materials. Fire resistance test
GOST R 53307-2009: Construction elements. Fire doors and gates. Fire resistance test method
GOST R 53308-2009: Building structures. Fire-resistance tests methods
GOST R 53309-2009: Buildings and building's fragments. Method of real fire tests. General requirements
GOST R 53310-2009: Through penetration for cables, hermetic inputs and through penetration of electric current types. Requirements of fire safety. Fire resistance test methods
GOST R 53311-2009: Coatings cables fire retardant. Methods for determination of fireproof efficiency
GOST R 53313-2009: Electrical mounting appliances. Requirements of fire safety. Test methods
GOST R 53315-2009: Cable products. Requirements of fire safety
GOST R 53316-2009: Cable lines. Circuit integrity under fire. Test method
GOST R 53321-2009: Thermal devices on various kind of fuel. Fire safety requirements. Test methods
GOST R 53323-2009: Flame arrestors and spark arrestors. General technical requirements. Test methods
GOST R 53324-2009: Dyking of storage tanks. Fire safety requirements
GOST R 53325-2009: Fire techniques. Means of fire automatics. The general technical requirements. Test methods
GOST R 53326-2009: Fire equipment. Self-contained open-circuit compressed air breathing apparatus. General technical requirements. Test methods
GOST R 53327-2009: The heat-insulated constructions of industrial pipelines. Spread flame test method
GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods
GOST R 53329-2009: Fire elevators. General technical requirements. Test methods
GOST R 53331-2009: Fire-fighting equipment. Hand nozzles. General technical requirements. Methods of testing
GOST R 53332-2009: Fire equipment. Fire motor pumps. Main parameters. General technical requirements. Methods of testing
GOST R 53333-2008: Electric energy. Electromagnetic compatibility of technical equipment. Electric energy quality control in the public power supply systems
GOST R 53334-2009: Vacuum equipment. Vapour vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)
GOST R 53335-2009: Vacuum equipment. Positive-displacement vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)
GOST R 53336-2009: Live-cycle of railway rolling stock. General requirements
GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 53338-2009: Vapour-permeable self-expanding and self-adhesive tapes for building application. Specifications
GOST R 53340-2009: Geodetic instruments. General specifications
GOST R 53341-2009: Operation, maintenance and repair for railway rolling stock. Terms and definitions
GOST R 53354-2009: Cables and their accessories. Impulse tests
GOST R 53355-2009: Solid mineral fuels. Ultimate analysis
GOST R 53356-2009: Solid mineral fuels. Determination of sulphur by IR spectrometry
GOST R 53357-2009: Solid mineral fuels. Proximate analysis
GOST R 53362-2009: Electromagnetic compatibility of technical equipment. Uninterruptible power systems. Requirements and test methods
GOST R 53363-2009: Digital radio-relay links. Quality parameters. Calculation methods
GOST R 53364-2009: Steel pipes, tubes and pipe products. Inspection documents
GOST R 53365-2009: Pipes for use as casing or tubing and couplings for them. Basic parameters and inspection of thread connections. General technical requirements
GOST R 53366-2009: Steel pipes for use as casing or tubing for wells in petroleum and natural gas industries. General specifications
GOST R 53367-2009: Combustible natural gas. Determination of sulphur-containing components using chromatographic method
GOST R 53368-2009: Consumer service of the electric and heat energy
GOST R 53370-2009: Removable protective polymeric covering for radiation protective rooms and box-like premises. Improvement of radioactivity situation. Technological requirements
GOST R 53371-2009: Decontaminable protective polymeric material and coating. Method used determine the decontamination coefficient
GOST R 53373-2009: Automatic receiver equipment for spectrum monitoring stations. Technical requirements and test methods
GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use
GOST R 53375-2009: Oil and gas wells. Geological-technological logging. General requirements
GOST R 53376-2009: Sound absorbing materials. Sound absorption measurement method in reverberation room
GOST R 53377-2009: Sound absorbing materials used in buildings. Assessment of sound absorption
GOST R 53378-2009: Acoustical materials used in floating floors of residential buildings. Method for determination of dynamic stiffness
GOST R 53382-2009: Multiple units. General requirements for the ability to use the devices for diagnostics
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST R 53386-2009: Printed circuit boards. Terms and definitions
GOST R 53387-2009: Lifts, escalators and moving walks. Risk assessment and reduction methodology
GOST R 53388-2009: Lifts. Control devices, signals and additional fittings
GOST R 53392-2009: Integrated Logistic Support. Logistic Support Analysis. General principles
GOST R 53393-2009: Integrated Logistic Support. General principles
GOST R 53394-2009: Integrated Logistic Support. Basic terms and definitions
GOST R 53402-2009: Pipeline valves. Methods of control and testing
GOST R 53403-2009: Iron ores, concentrates, agglomerates and pellets. Method for the determination of titanium content
GOST R 53405-2009: Copper cylinder wire. Specifications
GOST R 53406-2009: General-purpose fireclay and semiacidic refractory articles. Specifications
GOST R 53409-2009: Vehicles. Friction dry clutch. General technical requirements and test methods
GOST R 53410-2009: Grinding wheels for portable grinders. Specifications
GOST R 53411-2009: Saw blades for metal cutting. Specifications
GOST R 53412-2009: Woodruff keyseat cutters. Specifications
GOST R 53413-2009: End mills with brazed helical hard metal tips. Basic dimensions
GOST R 53414-2009: End mills with brazed helical hard metal tips with 7:24 taper shank. Basic dimensions
GOST R 53415-2009: Water. Sampling for microbiological analysis
GOST R 53418-2009: Seals. Order of the inspection of seals in operating condition
GOST R 53424-2009: Mechanical seals for freight containers. General technical requirements
GOST R 53425-2009: Connecting lines and engineering area in digital and analogue paths of sound broadcasting. Technical characteristics. Parameters of quality. Methods of measurements
GOST R 53429-2009: Printed circuit boards. Basic parameters of structure
GOST R 53431-2009: Railway automatics and telemechanics. Terms and definitions
GOST R 53432-2009: Printed circuit boards. General technical requirements for manufacture
GOST R 53439-2009: Brass wire for cold upsetting. Specifications
GOST R 53440-2009: Basic norms of interchangeability. Geometrical product specifications. Standard rates of taper and cone angles
GOST R 53442-2009: Basic norms of interchangeability. Geometrical product specifications. Tolerances of form, orientation, location and run-out
GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests
GOST R 53445-2009: Motor vehicles. Transmission of driving axis. Methods of bench tests
GOST R 53446-2009: Inflatable boats. Part 1. Boats with a maximum motor power rating of 4,5 kW
GOST R 53447-2009: Inflatable boats. Part 2. Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive
GOST R 53448-2009: Inflatable boats - Part 3: Boats with motor power rating not less than 15 kW
GOST R 53450-2009: Aviation engines and engine components. Industrial cleanliness of hydraulic, oil and fuel systems. Fuel system cleanliness classes
GOST R 53453-2009: Ergonomics of the thermal environment. Application of requirements of standards to people with special requirements
GOST R 53454.1-2009: Ergonomic procedures for the improvement of local muscular workloads. Part 1. Guidelines for reducing local muscular workloads
GOST R 53455-2009: Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of resistance to tearing (nail shank)
GOST R 53461-2009: Aviation engines and their assemblies. Methods of numbering and the description of a direction of rotation
GOST R 53462-2009: Thermomechanical permanent pipelines connections. Technical requirements
GOST R 53463-2009: Hammers. Safety requirements
GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances
GOST R 53465-2009: Equipment foundry. Foundry biases
GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications
GOST R 53472-2009: Rotating electrical machines. Asynchronous motors. Test methods
GOST R 53479-2009: Printing trades equipment. Methods for determination of noise emission dates. Accuracy grades 2 and 3
GOST R 53481-2009: Lubrication systems. Safety requirements
GOST R 53488-2009: Safety of attractions. Requirements for substantiation of safety of mechanical attractions. Basic principles
GOST R 53489-2009: Occupational safety standards system. Mounted and trailed agricultural machines. General safety requirements
GOST R 53490-2009: Agricultural tractors. The noise at the operator's position. Methods and conditions of measurements
GOST R 53491.1-2009: Pools. Treatment of water. Part 1. General requirements
GOST R 53499-2009: Tombac strips. Specifications
GOST R 53500-2009: Pipes from low-alloy steel for submarine sea pipelines. General specifications
GOST R 53522-2009: Tourist and excursionist services. Main principles
GOST R 53523-2009: Public catering. General requirements for prefabricate enterprises
GOST R 53524-2009: Congress activity. Terms and definitions
GOST R 53525-2009: Welding coordination -Tasks and responsibilities
GOST R 53526-2009: Welding personnel. Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials
GOST R 53529-2009: Trunking radio stations and repeaters of TETRA standard. Basic parameters. Technical requirements
GOST R 53531-2009: Digital video broadcasting (DVB). Requirements to information protection from non-authorized access in the cable and terrestrial television broadcast networks. Basic parameters. Technical requirements
GOST R 53532-2009: Quality of Services. Parameters of Quality for Telecommunications Services in the Public Switched Telephone Network. General requirements
GOST R 53533-2009: Digital high-definition television. Basic parameters of digital high-definition television systems. General requirements
GOST R 53537-2009: Sound broadcasting. The basic electric parameters of channels and of studio quality (with frequency band 20...20000 Hz)
GOST R 53539-2009: Electromagnetic compatibility of technical equipment. Resistibility of telecommunication equipment to overvoltages and overcurrents. General technical requirements
GOST R 53541-2009: Aviation engines and their units. Indexation of parameters of air (gas) condition on sections of air-gas channel aviation engines and air-gas systems connected with them
GOST R 53542-2009: Aviation engines and their components. Brazing of high-alloy steels in vacuum. General requirements for technological process
GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements
GOST R 53547-2009: Ceramic ware. Method of acid resistance determination
GOST R 53555-2017: Social service of the population. Quality control of social services given of persons without the certain place of residence and employment
GOST R 53559-2009: Vehicles. Forced ignitions engine fuel filters and filter elements. General technical requirements
GOST R 53560-2009: Intruder alarm systems. Power supply units. Classification. General technical requirements. Test methods
GOST R 53561-2009: Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
GOST R 53562-2009: Workplace air. Guidelines for selecting analytical methods for sampling and analysing isocyanides in air
GOST R 53565-2009: Condition monitoring and diagnostics of machines. Hazardous equipment monitoring. Vibration generated by rotodynamic pump and compressor units
GOST R 53566-2009: Microphones. Specifications
GOST R 53567-2009: Acoustics. Methods for the description and measurement of single impulses or series of impulses
GOST R 53568-2009: Non-destructive testing. Evaluation of third order elasticity modulus by ultrasound. General requirements
GOST R 53569-2009: Noise of machines. Noise test code for fastener driving tools. Engineering method
GOST R 53570-2009: Acoustics. Noise from shooting ranges. Part 1. Determination of acoustic characteristics of muzzle blast by measurement
GOST R 53571-2009: Acoustics. Noise from shooting ranges. Part 2. Estimation acoustic characteristics of muzzle blast and projectile sound by calculation
GOST R 53572-2009: Acoustics. Noise from shooting ranges. Part 4. Prediction projectile sound
GOST R 53573-2009: Mechanical vibration. Measurement of vibration transferred into resilient isolators. General requirements
GOST R 53574-2009: Noise. Assessment of noise annoyance by means of social and socio-acoustic surveys
GOST R 53577-2009: Mechanical vibration. Measurement of vibration transferred into resilient isolators. High-speed and medium-speed reciprocating internal combustion engines
GOST R 53578-2009: Vibration. Balancing. Guidance on the use and application of balancing standards
GOST R 53579-2009: System of standards in geological exploration of subsurface. Report on geological study of subsurface. General requirements for content and presentation
GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications
GOST R 53581-2009: Gasoline. Determination of the phosphorus content
GOST R 53582-2009: Soils. Method of determination of thawing soil shear resistance
GOST R 53583-2009: Heating devices. Test methods
GOST R 53602-2009: Parts of vehicle. Marking. General technical requirements
GOST R 53603-2009: Conformity assessment. Product Certification Schemes of the Russian Federation
GOST R 53604-2009: Conformity assessment. National Standards System in Conformity Assessment
GOST R 53605-2009: Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. General technical requirements
GOST R 53606-2009: Global navigation satellite systems. Methods and technologies of geodetic and cadastral works execution. Metrological support. Basic principles
GOST R 53607-2009: Global navigation satellite system. Etudes and technologies of geodetic and cadastral works execution. Determination of relative coordinates by pseudo-range measurements. Basic principles
GOST R 53608-2009: Global navigation satellite systems. Methods and technologies of geodetic and cadastral works execution. Ambiguity resolution for phase pseudo-ranges. Basic principles
GOST R 53609-2009: Global navigation satellite systems. Methods and technologies of execution geodesy and cadastral works executing. Evaluation of work capacity of two-frequencies geodetic apparatus by measuring of code and phase pseudo-ranges
GOST R 53610-2009: Global navigation satellite system. Formats of correction data transfer. Technical requirements
GOST R 53611-2009: Global navigation satellite systems. Methods and technologies of execution geodetic and cadastral works. General technical requirements
GOST R 53613-2009: Classification overall performance of influence of environmental conditions appearing in nature on the technical products. Precipitation and wind
GOST R 53615-2009: The influence of environmental conditions appearing in nature on the technical products. Overall performance. Solar radiation and temperature
GOST R 53616-2009: Requirements for performance of chambers for industrial products environmental endurance tests. Certification methods of chambers (without load) for humidity endurance test chambers
GOST R 53617-2009: Carbon brushes for electrical machines. Construction. Types and dimensions
GOST R 53622-2009: Information technology. Information-computing systems. Life cycle stages and steps, kinds and completeness of the documents
GOST R 53624-2009: Information technology. Software. Quality management systems. Requirements
GOST R 53626-2009: Information and communication technologies in education. Training equipment. General statements
GOST R 53627-2009: Fine-layered polymer coating for roadway of bridges. Specifications
GOST R 53628-2009: Metal roller bearing parts for bridge building. Specifications
GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications
GOST R 53630-2009: Pressure multilayer pipes for water-supply and heating systems. General specifications
GOST R 53631-2009: Tubing junctions with 24 degree cone angle. General technical requirements
GOST R 53632-2009: Parameters of Quality of Services of the Internet access. General requirements
GOST R 53634-2009: Gas-fired central heating boilers, type B boilers, of nominal heat input exceeding 70 kW, but not exceeding 300 kW. General technical requirements and test methods
GOST R 53635-2009: Gas-fired air heaters with forced convection for firing (heating) rooms not exceeding a net heat input of 100 kW. General technical requirements and test methods
GOST R 53636-2009: Pulp, paper, board. Terms and definition
GOST R 53637-2009: Automotive turbochargers. General technical requirements and test methods
GOST R 53638-2009: Reciprocating internal combustion engines. General specifications
GOST R 53639-2009: Reciprocating internal combustion engines. Acceptance. Test methods
GOST R 53640-2009: Motor vehicles. Diesel fuel filters. General technical requirements
GOST R 53646-2009: Noise of machines. Measurement of airborne sound emitted by powered small recreational craft
GOST R 53647.1-2009: Business continuity management. Part 1. Code of practice
GOST R 53647.2-2009: Business continuity management. Part 2. Specification
GOST R 53647.3-2010: Business continuity management. Part 3. Guide of implementation
GOST R 53647.4-2011: Business continuity management. Guideline for incident preparedness and operational continuity management
GOST R 53648-2009: Underground diesel locomotives. General technical requirements and test methods
GOST R 53649-2009: Shearers. General technical requirements. Test methods
GOST R 53650-2009: Plough installations. General specifications
GOST R 53651-2009: Paint materials. Method for determination of the effect of heat
GOST R 53652.1-2009: Thermoplastics pipes. Method for determination of tensile properties. Part 3. General requirement
GOST R 53652.2-2009: Thermoplastics pipes. Method for determination of tensile properties. Part 2. Pipes made of unplasticized poly(vinyl chloride), chlorinated poly(vinyl chloride) and high impact poly(vinyl chloride)
GOST R 53652.3-2009: Thermoplastics pipes. Method for determination of tensile properties. Part 3. Polyolefin pipes
GOST R 53653-2009: Paint materials. Method for determination of the pot life of multicomponent systems
GOST R 53654.1-2009: Paint materials. Method for determination of density. Part 1. Pyknometer method
GOST R 53655.1-2009: Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 1. Staircase methods
GOST R 53655.2-2009: Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 2. Instrumented puncture test
GOST R 53656.2-2009: Plastics. Determination of gas-transmission rate. Part 2. Equal-pressure method
GOST R 53657-2009: Iron ores, concentrates, agglomerates and pellets. Method for determination of divalent iron calculated as ferrous oxide
GOST R 53658-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of copper content
GOST R 53659-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of total manganese calculated as protoxide
GOST R 53660-2009: Ships and marine technology. Port facility security assessments and security plan development
GOST R 53661-2009: Security management system for the supply chain. Guidelines for the implementation
GOST R 53662-2009: Security management systems for the supply chain. Best practices for implementing supply chain security. Assessments and plans
GOST R 53663-2009: Requirements specification for security management system for the supply chain
GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53674-2009: Pipeline valves. Nomenclature of characteristics. Check-lists for design and order
GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements
GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements
GOST R 53677-2009: Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons
GOST R 53679-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 1. General principles for selection of cracking-resistant materials
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 53684-2009: Columns. Technical requirements
GOST R 53686-2009: Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metal
GOST R 53687-2009: Qualification test of welders. Fusion welding. Part 3. Copper and copper alloys
GOST R 53688-2009: Qualification test of welders. Fusion welding. Part 2. Aluminium and aluminium alloys
GOST R 53689-2009: Welding consumables. Technical delivery conditions for welding filler materials. Type of product, dimensions, tolerances and markings
GOST R 53690-2009: Qualification test of welders. Fusion welding. Part 1. Steels
GOST R 53691-2009: Resources saving. Waste treatment. Certificate of waste I-IV classes of hazard. Basic requirement
GOST R 53692-2009: Resources saving. Waste treatment. Stages of technological cycle of waste
GOST R 53695-2009: Noise. Method for determination of noise emission data of construction sites
GOST R 53696-2009: Optical non-destructive testing. Terms and definitions
GOST R 53698-2009: Thermal non-destructive testing. Terms and definitions
GOST R 53700-2009: Non-destructive testing. Magnetic particle testing. Part 3: Equipment
GOST R 53701-2009: Guidance on the application of GOST R ISO/IEC 17025 for sensory testing laboratories
GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods
GOST R 53703-2009: Tracking systems and anti-theft systems for use in security applications for vehicle. General technical requirements and test methods
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 53705-2009: Complex security systems. Stationary metal detectors for apartments. General technical requirements. Test methods
GOST R 53706-2009: Aviation fuels. Method of freezing point determination
GOST R 53707-2009: Petroleum products. Method of distillation at atmospheric pressure
GOST R 53708-2009: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST R 53709-2009: Oil and gas wells. Geophysical researches and works in wells. General requirements
GOST R 53710-2009: Oil and gas-oil fields. Rules for reservoir engineering
GOST R 53713-2009: Oil and gas-oil fields. Rules of development
GOST R 53714-2009: Motor fuels, aviation fuels and low-boiling distillates. Method for determination of existent gums by jet evaporation
GOST R 53715-2009: Aviation turbine fuels. Method for determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
GOST R 53716-2009: Fuel oils. Determination of hydrogen sulphide
GOST R 53717-2009: Petroleum products. Test method for flash point by Tag closed cup tester
GOST R 53718-2009: Aviation fuels. Method of smoke point determination
GOST R 53733-2009: Quality management systems of organizations providing communication services. Requirements
GOST R 53734.2.3-2010: Electrostatics. Part 2.3. Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
GOST R 53734.4.1-2010: Electrostatics. Part 4.1. Test methods for specific applications. Electrical resistance of floor covering and installed floors
GOST R 53734.4.5-2010: Electrostatics. Part 4-5. Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
GOST R 53734.5.1-2009: Electrostatics. Protection of electronic devices from electrostatics phenomena. General requirements
GOST R 53734.5.2-2009: Electrostatics. Protection of electronic devices from electrostatics phenomena. User guides
GOST R 53735.5-2009: Surge arresters without gaps and non-linear resistor type gapped surge arresters for a.c. electrical installations for voltages from 3 to 750 kV. Part 5. Selection and application recommendations
GOST R 53736-2009: Electronic components. Procedure of creation and launching into manufacture. Main provisions
GOST R 53737-2009: Petroleum and natural gas industries. Reciprocating compressors. General technical requirements
GOST R 53740-2009: Resources saving. Packaging. Requirements specific to minimization, composition, manufacturing of package
GOST R 53741-2009: Resources saving. Packaging. Requirements for packaging recoverable in the form of energy recovery
GOST R 53742-2009: Resources saving. Packaging. Requirements for packaging recoverable by material recycling
GOST R 53744-2009: Resources saving. Packaging. Requirements for the use of European standards in the field of packaging and packaging waste
GOST R 53754-2009: Resources saving. Packaging. Definitions and methods of calculation of efficiency of the recycling packaging as a secondary material resources
GOST R 53756-2009: Resources saving. Packaging. Criteria for recycling methods and description of recycling processes with registration flow chart
GOST R 53759-2009: Resources saving. Packaging. Reuse
GOST R 53762-2009: Natural combustible gases. Determination of hydrocarbon dew point temperature
GOST R 53763-2009: Natural combustible gases. Determination of water dew point temperature
GOST R 53764-2009: Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
GOST R 53768-2010: Wires and cables for electrical equipment of rated voltages up to and including 450/750 V. General specifications
GOST R 53770-2010: Passenger lifts. Basic parameters and dimensions
GOST R 53771-2010: Goods lifts. Basic parameters and dimensions
GOST R 53775-2010: Packaging. Stacking tests using а static lоаd
GOST R 53777-2010: Master alloys of aluminium. Specifications
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 53779-2010: Conformity assessment. Use of management systems. Principles and requirements
GOST R 53780-2010: Lifts. General safety requirements for the construction and installation
GOST R 53781-2010: Lifts. Rules and method of examination (test) and measurement by certification of lifts. Rules of sampling
GOST R 53782-2010: Lifts. Rules and methods of the appraisement of lifts conformity before putting in service
GOST R 53783-2010: Lifts. Rules and methods of the appraisement of lifts conformity in period exploitation
GOST R 53784-2010: Optical elements for light signal devices of a railway transport. Specifications
GOST R 53785-2010: Facade’s thermo insulation composite systems with external mortar’s lays. Classification
GOST R 53786-2010: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST R 53787-2010: Sealing devices. Test methods of rod type power sealing devices resistance to unauthorized access. General requirements
GOST R 53790-2010: Non-traditional technologies. Energetics of biowastes. General technical requirements for biogas sets
GOST R 53792-2010: Procedure for Low voltage Equipment Conformity
GOST R 53793-2010: Live working. Conformity assessment applicable to tools, devices and equipment
GOST R 53797-2010: Geological information about subsurface. Main provisions and general requirements
GOST R 53798-2010: Standard guide for laboratory information management systems (LIMS)
GOST R 53801-2010: Federal communications. Terms and definitions
GOST R 53802-2010: Space systems and stations. Terms and definitions
GOST R 53803-2010: Copper rod for electrical purposes. Specifications
GOST R 53804-2010: Vehicles. Axle housings. Bench test methods
GOST R 53805-2010: Motor vehicles. Manual slack adjusters of drum brakes for trucks and buses. Technical requirements and test methods
GOST R 53806-2010: Vehicles. Metallic cables of parking brakes. Technical requirements and test methods
GOST R 53807-2010: Vehicles. Hydraulic cylinder and pumps hydraulic mechanisms tilting cab. Technical requirements and test methods
GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods
GOST R 53809-2010: Automobile engines. Cylinder liners. Technical requirements and test methods
GOST R 53810-2010: Automobile engines. Valves. Technical requirements and test methods
GOST R 53811-2010: Automobile engines. Valve springs. Technical requirements and test methods
GOST R 53812-2010: Automobile engines. Valve tappets. Technical requirements and test methods
GOST R 53813-2010: Automobile engines. Connecting rods. Technical requirements and test methods
GOST R 53814-2010: Vehicles for transportation of money takings and valuable loads. Technical requirements and test methods
GOST R 53815-2010: Cars. Ball type trailer coupling equipment. Technical requirements and test methods
GOST R 53816-2010: Vehicles. Hydraulic telescopic shock absorbers. Technical requirements and test methods
GOST R 53817-2010: Vehicles. Telescopic single acting hydraulic cylinders. Technical requirements and test methods
GOST R 53818-2010: Vehicles. Wheel balancing weights. Technical requirements and test methods
GOST R 53819-2010: Vehicles. Fastenings wheels. Technical requirements and test methods
GOST R 53820-2010: Motor vehicles. Details of sealing and protective. Technical requirements and test methods
GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods
GOST R 53822-2010: Vehicles. Hydraulic jacks. Technical requirements and test methods
GOST R 53823-2010: Vehicles. Additional antitheft devices. Technical requirements and test methods
GOST R 53824-2010: Vehicles. Not-folding wheels. Technical requirements and test methods
GOST R 53825-2010: Vehicles. Pneumatic springs. Technical requirements and test methods
GOST R 53826-2010: Vehicles. High-voltage wires. Technical requirements and test methods
GOST R 53827-2010: Vehicles. Cylindrical screw springs, torsions, stabilizers suspension. Technical requirements and test methods
GOST R 53828-2010: Vehicles. System of microclimate. Technical requirements and test methods
GOST R 53829-2010: Vehicles. Electrical starters. Technical requirements and test methods
GOST R 53830-2010: Vehicles. Hubs and the half-wheels. Technical requirements and test methods
GOST R 53831-2010: Vehicles. Tachographs. Technical requirements for installation
GOST R 53832-2010: Vehicles. Heat exchangers and thermostats. Technical requirements and test methods
GOST R 53833-2010: Vehicles. Independent warming-heating units. Technical requirements and test methods
GOST R 53834-2010: Vehicles. Hoses for hydraulic systems. Technical requirements and test methods
GOST R 53835-2010: Vehicles. Elements of the steering actuator and guide vane suspension. Technical requirements and test methods
GOST R 53836-2010: Automobile engines. Thin-walled liners of main and connecting rod bearings. Technical requirements and test methods
GOST R 53837-2010: Automobile engines. Air cleaners. Technical requirements
GOST R 53838-2010: Automobile engines. Noise exposure limits and measurement techniques
GOST R 53839-2010: Automobile engines. Liquid pumps of cooling systems. Technical requirements and test methods
GOST R 53840-2010: Automobile engines. Startability. Test methods
GOST R 53841-2010: Automobile engines. Drive belts. Technical requirements and test methods
GOST R 53842-2010: Automobile engines. Spark plugs. Technical requirements and test methods
GOST R 53843-2010: Engines of vehicles. Piston rings. Technical requirements and test methods
GOST R 53844-2010: Vehicles. Fine filters of oil for automobile, tractor and combine engines. Technical requirements and test methods
GOST R 53845-2010: Steel rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing
GOST R 53854-2010: Classification of chemical mixtures hazard for health
GOST R 53855-2010: Classification of chemicals which hazard is caused by physical and chemical properties. Test methods of explosive chemicals
GOST R 53856-2010: Classification of chemicals hazard. General requirements
GOST R 53857-2010: Classification of chemicals for environmental hazards. General principles
GOST R 53858-2010: Classification of chemical mixtures hazard for the environmental
GOST R 53859-2010: Refractory alumosilicate mortars. Specifications
GOST R 53863-2010: Air transport. Maintenance and repair system of aviation equipment. Terms and definitions
GOST R 53864-2010: Global navigation satellite system. Geodetic satellite frames. Terms and definitions
GOST R 53865-2010: Gas distribution systems. Terms and definitions
GOST R 53866-2010: Crane rails. Specifications
GOST R 53867-2010: Wood-based panels and plywood. Determination of formaldehyde release by the gas analysis method
GOST R 53879-2010: Self-ballasted lamps for general lighting services. Performance requirements
GOST R 53880-2010: Coaxial cables for cable television networks. General specifications
GOST R 53881-2010: Self-ballasted lamps for general lighting services. Safety requirements
GOST R 53887-2010: Water. Methods for the determination of cations (ammonium, barium, potassium, calcium, lithium, magnesium, sodium, strontium) content using capillary electrophoresis
GOST R 53888-2010: Sealing devices. Test methods of indicative seals resistance to unauthorized access. General requirements
GOST R 53890-2010: Guide for specification of product properties and classes. Part 2. Technical principles and guidance
GOST R 53893-2010: Guidelines and requirements for integrated management systems
GOST R 53894-2010: Knowledge management. Terms and definitions
GOST R 53907-2010: Global navigation satellite system. Railway differential subsystems. General Concepts. Terms and definitions
GOST R 53910-2010: Water. Methods of toxicity determination by growth inhibition of marine unicellular algae Phaeodactylum tricornutum Bohlin and Sceletonema costatum (Greville) Cleve
GOST R 53920-2010: Laminated plywood. Specifications
GOST R 53922-2010: Diamond and from cubic boron nitride (elbon) powders. Grain and grain size distribution of grinding powders. Test of grain size distribution
GOST R 53923-2010: Diamond and cubic boron nitride (elbor) grinding wheels. Specifications
GOST R 53924-2010: Metal-cutting band saw blades. Types and basic dimensions
GOST R 53925-2010: Pliers and nippers. General technical requirements, methods of control, tests
GOST R 53926-2010: End milling cutters with shell-type inserted blades for woodcutting. General specifications
GOST R 53927-2010: Shell-type inserted blade circular cutterbloks for woodcutting. General specifications
GOST R 53930-2010: Medical-social expertise. Information support system of medical-social expertise. General provisions
GOST R 53932-2010: Tube billet. General specifications
GOST R 53933-2010: Refractories for linings of steel-teeming ladles. Specifications
GOST R 53934-2010: Grain-oriented electrical steel strip. Specifications
GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests
GOST R 53936-2010: Shank-type milling cutters of solid and tipped design. Symbols
GOST R 53937-2010: Shank-type milling cutters with indexable inserts. Symbols
GOST R 53949-2010: Technical potassic saltpeter. Specifications
GOST R 53953-2010: Railway telecommunication. Terms and definitions
GOST R 53960-2010: Metal frame yield supports. Trapezoid supports. General specifications
GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods
GOST R 53962.1-2010: Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles. Part 1. Principles and methods for assessment of thermal stress
GOST R 53963.2-2010: Vibration. Measurement of vibrations in buildings. Measuring instrumentation tests
GOST R 53965-2010: Non-destructive testing. Evaluation of mechanical stresses. General requirements to the methods classification
GOST R 53966-2010: Non-destructive testing. Evaluation of mechanical stresses in constructions material. General requirements for the order of methods choice
GOST R 53977-2010: Compressed air of railway rolling stock pneumatic systems. Requirements to quality
GOST R 53978-2010: Special railway rolling stock. General technical requirements
GOST R 53979-2010: Machines for compacting, adjusting, tamping, aligning and stabilizing the railway track and for ballast shoulder forming. General technical requirements
GOST R 53980-2010: Machines for disassembling, laying down rail-sleeper assemblies and railway switches and flat wagons specially designed for them. General technical requirements
GOST R 53981-2010: Machines for rail welding, rail and rail fastening repair, transportation of long rails. General technical requirements
GOST R 53982-2010: Machines for compacting, adjusting, tamping, aligning and stabilizing the railway track. General technical requirements
GOST R 53983-2010: Machines and trains for removing pollutants, snow and ice from the railway track. General technical requirements
GOST R 53984-2010: Mobile elevating work platforms. Safety principles and inspection of technical operational state
GOST R 53986-2010: Reciprocating internal combustion engine driven alternating current generating sets. Part 3. Alternating current generators
GOST R 53987-2010: Reciprocating internal combustion engine driven alternating current generating sets. Part 1. Application, ratings and performance
GOST R 53988-2010: Reciprocating internal combustion engine driven alternating current generating sets. Part 4. Control gear and switchgear
GOST R 53997-2010: Tourist services. Consumer information. General requirements
GOST R 53998-2010: Tourist services. Tourism services for physically challenged people. General requirements
GOST R 54003-2010: Ecological management. Evaluation of the past ecological damage accumulated in places of arrangement organizations. General principles
GOST R 54006-2010: Approval testing of welders. Fusion welding. Part 4. Nickel and nickel alloys
GOST R 54007-2010: Brazing. Brazer approval
GOST R 54008-2010: Conformity assessment. Conformity Declaration Schemes
GOST R 54008-2022: Conformity assessment. Conformity declaration schemes
GOST R 54009-2010: Conformity assessment. Use of marks indicating conformity
GOST R 54010-2010: Conformity assessment. Certified products surveillance
GOST R 54011-2010: Conformity assessment. General rules for product sampling in mandatory conformity assessment by the third party
GOST R 54012-2010: Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806
GOST R 54013-2010: Hydraulic fluid power. Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards
GOST R 54019-2010: Fire hazard testing. Part 2-20. Glowing/hot-wire based test methods. Hot-wire coil ignitability. Apparatus, test method and guidance
GOST R 54021-2010: Global navigation satellite systems. Regional differential subsystems. Technical requirements and methods of testing
GOST R 54022-2010: Global navigation satellite systems. Flying vehicles trajectory measurement system based on satellite navigation systems. General technical requirements and test methods
GOST R 54025-2010: Chayka Radionavigation System. Receivers. Specification Requirements. Methods of testing and required test results
GOST R 54038-2010: Soils. Methods of Cs-137 determination
GOST R 54039-2010: Soil quality. Quick method for the determination of oil products by NIR spectroscopy
GOST R 54041-2010: Soils. Method of Sr-90 determination
GOST R 54049-2010: Quality management systems. Specific requirements for GOST R ISO 9001-2008 applications in aeronautical meteorological services
GOST R 54061-2010: Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles
GOST R 54069-2010: Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems. Part 1. Construction and testing
GOST R 54070-2010: Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
GOST R 54072-2010: Space technology. Polymer composites. List of properties
GOST R 54073-2010: Electric power supply systems of airplanes and helicopters. General requirements and norms of quality of electric energy.
GOST R 54080-2010: Aviation transport. Aircraft operation system. Information analysis system for aircraft airworthiness monitoring. General requirements
GOST R 54081-2010: Influence of environmental conditions appearing in nature on the technical products. Overall performance. Fire
GOST R 54082-2010: Requirements for performance of chambers for industrial products environmental endurance tests. Data processing methods for chamber certification (calibration)
GOST R 54083-2010: General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for temperature resistance test
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54087-2010: Integrated logistic support. Quality assurance and approval of electronic interactive maintenance and repair documents. Basic principles and general requirements
GOST R 54089-2010: Integrated Logistic Support. Product Electronic Dossier. General principles
GOST R 54090-2010: Integrated logistic support. Electronic lists and catalogues of provisioning items. Basic principles and general requirements
GOST R 54091-2010: Engines for motor cultivators and small-sized tractors. Vibroacoustic characteristics and test methods
GOST R 54092-2010: Special railway rolling stock. Outdoor noise. Measuring standards and methods of determination
GOST R 54093-2010: Wheel for railway stock. Methods of residual stress determination
GOST R 54095-2010: Resources conservation. Requirements for environmental recovery of used tyres
GOST R 54097-2010: Resources saving. Best available techniques. Identification methodology
GOST R 54098-2010: Resources saving. Secondary material resources. Terms and definitions
GOST R 54100-2010: Nonconventional technologies. Renewable energy sources. Main principles
GOST R 54101-2010: Means of automation and control systems. Means and systems of safety. Service and regular maintenance
GOST R 54102-2010: Electromagnetic compatibility of technical equipment. Safety of household and similar electrical appliances when subjected to electromagnetic disturbances. Requirements and test methods
GOST R 54103-2010: Fire hazard testing. Test methods. Glow-wire test and guidance
GOST R 54104-2010: Perspective industrial technologies. Classification and conformity assessment of products, processes and services for petroleum and natural gas industries
GOST R 54105-2010: Polymeric films and sheeting. Method for determination of wetting tension
GOST R 54106-2010: Polymeric films and sheeting. Method for determination of dimensional change on heating
GOST R 54110-2010: Hydrogen generators using fuel processing technologies. Part 1. Safety
GOST R 54111.1-2010: Fuel cell road vehicles. Safety specifications. Part 1. Vehicle functional safety
GOST R 54111.2-2010: Fuel cell road vehicles. Safety specifications. Part 2. Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
GOST R 54111.3-2011: Fuel cell road vehicles. Safety engineering requirements. Part 3. Protection of persons against electric shock
GOST R 54113-2010: Compressed hydrogen surface vehicle refuelling connection devices
GOST R 54114-2010: Transportable gas storage devices and systems for storing hydrogen based on metal hydrides
GOST R 54115-2010: Global navigation satellite system. General-purpose rolling stock receiver. Technical requirements
GOST R 54116-2010: The Global Navigation Satellite Systems. Maritime navigation receiver equipment. Technical requirements, test methods and required test results
GOST R 54117-2010: The Global Navigation Satellite Systems. Maritime differential subsystems. Navigation receiver equipment. Performance standards, methods of testing and required test results
GOST R 54119-2010: The Global Navigation Satellite Systems. Receiver equipment GNSS GLONASS/GPS/GALILEO shipborne multisystems, multichanels. Technical requirements, test methods and required test results
GOST R 54120-2010: Automobile engines. Startability. Technical requirements
GOST R 54121-2010: Safety of machinery. Requirements for the operational manual
GOST R 54122-2010: Safety of machinery. Requirements for justification of safety
GOST R 54123-2010: Safety of machinery and equipment. Terms, definitions and basic indications of safety
GOST R 54125-2010: Safety of machinery and equipment. Principles for safety ensuring while designing
GOST R 54126-2010: Warning devices for intruder alarm systems. Classification. General technical requirements and test methods
GOST R 54127-1-2010: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General requirements
GOST R 54127-2-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance
GOST R 54127-3-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance
GOST R 54127-4-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth connection and equipotential bonding
GOST R 54127-5-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth
GOST R 54128-2010: Tractive railway rolling stock. Springs of spring suspensions
GOST R 54129-2010: Emission of the exhaust gas pollutants by the main-line and shunting for the special-purpose rolling stock. Norms and determination methods
GOST R 54130-2010: Quality of electric energy. Terms and definitions
GOST R 54132-2010: Cutting tool data representation and exchange. Part 4. Reference dictionary for adaptive items
GOST R 54134-2010: Environmental management. Guidance for organizational safeguards application and risk assessment. Greenhouse gas emissions
GOST R 54135-2010: Environmental management. Guidance for organizational safeguards application and risk assessment. Native zone protection. General aspects and monitoring
GOST R 54136-2010: Industrial automation systems and integration. Guide for standards implementation, structure and dictionary
GOST R 54138-2010: Implementation of the enterprises activity self-certification with conformance of the enterprise quality management system to the requirements of GOST R ISO 9001-2008
GOST R 54139-2010: Environmental management. Guidance for organizational safeguards application and risk assessment. Climate fluctuation
GOST R 54140-2010: Guidance for organizational safeguards application and risk assessment. Chemical agents and materials
GOST R 54141-2010: Risk management. Implementation guide for organizational security measures and risk assessment. Reference incidents scenarios
GOST R 54144-2010: Risk management. Implementation guide for organizational security measures and risk assessment. Incident identification
GOST R 54145-2010: Risk management. Implementation guide for organizational security measures and risk assessment. General methodology
GOST R 54147-2010: Strategic and innovation management. Terms and definitions
GOST R 54148-2010: Human exposure to electromagnetic fields from household and similar electrical appliances. Methods for evaluation and measurement
GOST R 54149-2010: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in the public power supply systems
GOST R 54151-2010: Platinum alloys catalytic gauzes. Specifications
GOST R 54152-2010: Tapes and strips from Л90 brass for plating. Specifications
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications
GOST R 54158-2010: Thin-walled tubes from copper and copper alloys. Specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54160-2010: Ribbons from cuprum-nickel, nickel silver and monel. Specifications
GOST R 54161-2010: Mirrors. General specifications
GOST R 54163-2010: Glass and glass products. Test method for resistance to climatic exposure. Frost resistance test method
GOST R 54165-2010: Glass and glass products. Thermal properties determination methods. Thermal resistance determination method
GOST R 54166-2010: Glass and glass products. Thermal properties determination methods. Thermal resistance calculation method
GOST R 54167-2010: Glass and glass products. Determination of energy balance value. Calculation method
GOST R 54168-2010: Glass and glass products. Thermal properties determination method. Determination of the emissivity
GOST R 54169-2010: Tinted flat glass. General specifications
GOST R 54170-2010: Clear flat glass. Specifications
GOST R 54171-2010: Laminated glass. Specifications
GOST R 54172-2010: Sealed insulating glass units. Method of life cycle determination
GOST R 54173-2010: Sealed insulating glass units. Methods for determining the physical attributes of edge seals
GOST R 54174-2010: Sealed insulating glass units. Rules and methods of products quality assurance
GOST R 54175-2010: Sealed insulating glass units. Specifications
GOST R 54176-2010: Soft coating low emissivity glass. Specification
GOST R 54177-2010: Hart coat low emissivity glass. Specifications
GOST R 54178-2010: Soft coating solar protection or decorative glass. Specifications
GOST R 54179-2010: Hard coating solar protection or decorative glass. Specifications
GOST R 54180-2010: Heat strengthened glass. Specifications
GOST R 54181-2010: Glass and glass products. Test method for resistance to humidity
GOST R 54182-2010: Glass and glass products. Salt spray test method
GOST R 54183-2010: Glass and glass products. Test method for resistance to UV-radiation
GOST R 54184-2010: Solid biofuels. Determination of the content of volatile matter
GOST R 54185-2010: Solid biofuels. Determination of ash content
GOST R 54186-2010: Solid biofuels. Determination of moisture content by oven dry method. Part 1. Total moisture. Reference method
GOST R 54187-2010: Solid biofuels. Sampling. General requirements
GOST R 54188-2010: Solid biofuels. Determination of particle size distribution. Part 1. Oscillating screen method using sieve apertures of 3,15 mm and above
GOST R 54189-2010: Solid biofuels. Determination of particle size distribution. Part 2. Vibrating screen method using sieve apertures of 3,15 mm and below
GOST R 54190-2010: Solid biofuels. Determination of particle size distribution. Part 3. Rotary screen method
GOST R 54191-2010: Solid biofuels. Determination of bulk density
GOST R 54192-2010: Solid biofuels. Determination of moisture content. Oven dry method. Part 2. Total moisture. Simplified method
GOST R 54193-2010: Resources saving. Energy production. Guidance on implementing the best available techniques for improving energy efficiency in thermal energy generation
GOST R 54194-2010: Resources saving. Production of cement. Best available techniques for improving energy efficiency
GOST R 54195-2010: Recourses saving. Industrial production. Guidance on regarding the indices (indicators) of energy efficiency
GOST R 54196-2010: Recourses saving. Industrial production. Guidance on the identification of the aspects of energy efficiency
GOST R 54197-2010: Recourses saving. Industrial production. Guidance on planning the indices (indicators) of increasing the energy efficiency
GOST R 54198-2010: Recourses saving. Industrial production. Guidance on the application of the best available technologies for increasing the energy efficiency
GOST R 54199-2010: Resources saving. Energy production. Guidance on implementing the best available techniques for improving energy efficiency in electricity generation
GOST R 54200-2010: Resources saving. Energy production. Guidance on implementing the best available techniques for improving energy efficiency in fuel combustion
GOST R 54201-2010: Resources saving. Production of domestic and container glass. Best available techniques for improving energy efficiency
GOST R 54202-2010: Resources conservation. Gaseous fuel. Best available techniques in gaseous fuel combustion
GOST R 54203-2010: Resources saving. Stone and brown coals. Best available techniques in prevention of emissions unloading, storage and transportation
GOST R 54204-2010: Resources conservation. Stone and brown coals. Best available techniques of incineration
GOST R 54205-2010: Resources conservation. Waste treatment. Best available techniques for improving energy efficiency on incineration
GOST R 54206-2010: Resources saving. Production of lime. Best available techniques for improving energy efficiency
GOST R 54207-2010: Resources conservation. Leather industry. Best available techniques for the energy efficiency
GOST R 54208-2010: Protective decorative coating for wood furniture. Classification and designation
GOST R 54211-2010: Solid biofuels. Determination of moisture content by oven dry method. Part 3. Moisture in general analysis sample
GOST R 54212-2010: Solid biofuels. Methods for sample preparation
GOST R 54213-2010: Solid biofuels. Determination of major elements
GOST R 54214-2010: Solid biofuels. Determination of minor elements
GOST R 54215-2010: Solid biofuels. Determination of total content of sulphur and chlorine
GOST R 54216-2010: Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods
GOST R 54217-2010: Solid biofuels. Sampling. Part 1. Methods for sampling
GOST R 54218-2010: Solid biofuels. Sampling. Part 2. Methods for sampling particulate material transported in lorries
GOST R 54220-2010: Solid biofuels. Fuel specifications and classes. Part 1. General requirements
GOST R 54221-2010: Humic substances from brown coals, lignites and oxidized coals. Test methods
GOST R 54222-2010: Solid mineral fuels. Determination of total fluorine content
GOST R 54223-2010: Solid recovered fuels. Determination of the content of volatile matter
GOST R 54224-2010: Solid recovered fuels. Determination of ash content
GOST R 54225-2010: Solid recovered fuels. Determination of bulk density
GOST R 54226-2010: Solid recovered fuels. Determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
GOST R 54227-2010: Solid recovered fuels. Methods for sampling
GOST R 54228-2010: Solid recovered fuels. Methods for laboratory sample preparation
GOST R 54229-2010: Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST R 54230-2010: Solid recovered fuels. Determination of particle size distribution by screen method
GOST R 54231-2010: Solid recovered fuels. Determination of moisture content using the oven drying. Part 1. Total moisture. Reference method
GOST R 54232-2010: Solid recovered fuels. Determination of moisture content using the oven dry method. Part 2. Total moisture. Simplified method
GOST R 54233-2010: Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
GOST R 54234-2010: Solid recovered fuels. Determination of carbon, hydrogen and nitrogen content by instrument methods
GOST R 54235-2010: Solid recovered fuels. Terms and definitions
GOST R 54236-2010: Solid recovered fuels. Specifications and Classes
GOST R 54237-2010: Solid mineral fuels. Determination of chemical composition of ash by method of atomic emission spectrometry with inductively coupled plasma
GOST R 54238-2010: Solid mineral fuels. Determination of ash fusibility
GOST R 54239-2010: Solid mineral fuels. Selection of methods for the determination of trace elements
GOST R 54240-2010: Solid mineral fuel. Determination of extractable metals in dilute hydrochloric acid
GOST R 54242-2010: Solid mineral fuel. Determination of total arsenic and selenium content
GOST R 54243-2010: Solid mineral fuel. Determination of total mercury content
GOST R 54244-2010: Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
GOST R 54245-2010: Solid mineral fuel. Calculation of analyses to different bases
GOST R 54246-2010: Coal. Determination of bulk density
GOST R 54247-2010: Hard coal. Determination of plastic properties by Gieseler plastometer method
GOST R 54248-2010: Peat briquettes and pellets for heating purposes. Specifications
GOST R 54250-2010: Coke. Determination of coke reactivity index (CRI) and coke strength after reaction (CSR)
GOST R 54251-2010: Coke. Method for determination of bulk density in a small container
GOST R 54252-2010: Carbonaceous materials used in the production of aluminium. Sampling. General requirements. Part 1. Bottom blocks
GOST R 54253-2010: Carbon materials. Test method for linear thermal expansion coefficient
GOST R 54254-2010: Carbon materials. Test method for thermal conductivity at room temperature
GOST R 54256-2010: Electrode products. Terms and definitions
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
GOST R 54258-2010: Standard test method for collecting gross samples and determining the fuel quality of RDF
GOST R 54260-2010: Resources saving. Waste management. Standard practice for use of scrap tire-derived fuel
GOST R 54261-2010: Resources saving. Waste management and energy production. Standard test method for gross calorific and ash value of waste materials
GOST R 54262-2010: Resources saving. Waste management and energy production. Standard test method for thermal characteristic of refused derived fuel macrosamples
GOST R 54263-2010: Pulp and paper production processes. Method for determination of absorbable organic halogen compounds (AOX) content in natural and waste waters of pulp and paper mills
GOST R 54264-2010: Air transport. System of maintenance and repair of aviation technics. Methods and procedures of anti-icing handling of airplanes. General requirements
GOST R 54266-2010: Pneumatic tyres. Packing, transportation and storage
GOST R 54267-2010: Ethanol, denatured fuel ethanol and fuel ethanol (Ed75-Ed85). Method for determination of pH
GOST R 54268-2010: Aviation fuels and petroleum distillates. Determination of aromatic hydrocarbon types by high performance liquid chromatography method with refractive index detection
GOST R 54269-2010: Fuels. Method of determination for cold filter plugging point
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
GOST R 54273-2010: Petroleum and petroleum products. Guide for use of the measurement tables
GOST R 54274-2010: Aviation fuels. Determination of particulate contamination by laboratory filtration method
GOST R 54276-2010: Water. Methods for determination of copper
GOST R 54277-2010: Fuel ethanol. Determination of total and potential sulphates and inorganic chlorides by method of direct injection suppressed ion chromatography
GOST R 54279-2010: Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup tester
GOST R 54280-2010: Aviation fuels. Determination of freezing point by automatic laser method
GOST R 54281-2010: Petroleum products, lubricating oils and additives. Test method for determination of water by coulometric Karl Fischer titration
GOST R 54282-2010: Gasoline. Determination of oxygenates by method of gas chromatography and oxygen selective flame ionization detection
GOST R 54283-2010: Motor fuels. Uniform designation of automobile gasolines and diesel fuels being in circulation on the territory of the Russian Federation
GOST R 54284-2010: Crude oil. Determination of water by coulometric Karl Fischer titration
GOST R 54285-2010: Gasoline and methanol fuels. Determination of total oxygen content by methods of reductive pyrolysis
GOST R 54286-2010: Residual fuel oils. Method for measurement of hydrogen sulphide in the vapour phase
GOST R 54287-2010: Fuel ethanol. Determination of total and potential inorganic sulphates and total inorganic chlorides by method of ion chromatography using aqueous sample injection
GOST R 54288-2010: Light liquid petroleum hydrocarbons. Determination of trace quantities of sulphur by oxidative microcoulometry
GOST R 54289-2010: Diesel fuels. Method for determination of filterability by low-temperature flow test (LTFT)
GOST R 54290-2010: Fuel ethanol (Ed75-Ed85) for automotive spark-ignition engines. Specifications
GOST R 54291-2010: Crude petroleum. Gas chromatography method for determination of components boiling temperature range distribution
GOST R 54293-2010: Production conditions analysis for product attestation
GOST R 54294-2010: Conformity assessment. Impartiality. Principles and requirements
GOST R 54295-2010: Conformity assessment. Complaints and appeals. Principles and requirements
GOST R 54296-2010: Conformity assessment. Confidentiality. Principles and requirements
GOST R 54297-2010: Conformity assessment. Disclosure of information. Principles and requirements
GOST R 54298-2010: Environmental management systems. Certification procedure of environmental management systems to accordance with GOST R ISO 14001-2007
GOST R 54299-2010: Marine fuels. Specifications
GOST R 54300-2011: Refractory products for laying of stoves and hot blast mains of blast furnaces. Specifications
GOST R 54301-2011: Cold-rolled electrolyze zinc sheet with polymer coating, repainted by the continuous coil-coating process. Specifications
GOST R 54302-2011: Sealing devices. Test methods of security seals resistance to environmental climatic and mechanical factors occurring in operation
GOST R 54303-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of peel resistance of joints
GOST R 54304-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of shear resistance of joints
GOST R 54305-2011: General-use automobile roads. Horizontal illumination from artificial lighting. Technical requirements
GOST R 54306-2011: General-use automobile roads. Road marking wares. Polymer tapes. Technical rudiments
GOST R 54307-2011: General-use automobile roads. Road marking wares. Polymer tapes. Test methods
GOST R 54308-2011: Аutomobile roads of the general use. Horizontal illumination from artificial lighting. Control methods
GOST R 54310-2011: Blister copper. Specifications
GOST R 54311-2011: Insulating refractory products. Accelerated method for determination of permanent change in dimensions on heating
GOST R 54312-2011: Corundum and high alumina refractory products. Specifications
GOST R 54314-2011: Special vehicles with multifunctional facilities. General technical requirements
GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements
GOST R 54318-2011: Procedure for duration of quality management systems and environmental management systems audits. General requirements
GOST R 54322-2011: Aircraft. Symmetric clamps with liner and bonding strip. Design
GOST R 54323-2011: Motor gasolines. Determination of N-methylaniline by method of capillary gas chromatography
GOST R 54326-2011: Springs of spring suspension of the railway rolling stock. Method of fatigue life test
GOST R 54327-2011: Glass and glazing. Sound insulation determination method
GOST R 54331-2011: Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear. Specifications
GOST R 54332-2011: Peat. Methods of sampling
GOST R 54333-2011: Particle and fibre boards. Method for determination of tensile strength perpendicular to the plane of the panel
GOST R 54334-2011: Current collectors of railways electric rolling stock. General specifications
GOST R 54335-2011: Palladium. Method of spark atomic-emission analysis
GOST R 54336-2011: Environmental management systems for nanoproduct producing organizations. Requirements
GOST R 54337-2011: Occupational safety management systems for nanoproduct producing companies. Requirements
GOST R 54338-2011: Quality management systems for nanoproduct producing organizations. Requirements
GOST R 54341-2011: Social services of the population. Quality control of rehabilitation services given for elderly persons
GOST R 54342-2011: Social services of the population. Methods of quality control of social services
GOST R 54343-2011: Social service of the population. The order and conditions of granting of social services to children
GOST R 54344-2011: Fire equipment. Mobile manipulation vehicle systems for eliminating of emergencies and fire extinguishing. Classification. General technical requirements. Test methods
GOST R 54350-2011: Lighting fittings. Light requirements and test methods
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 54360-2011: Laboratory information management systems (LIMS). Standard guide for validation of LIMS
GOST R 54362-2011: Well logging. Terms and definitions
GOST R 54363-2011: Field geophysical survey. Terms and definitions
GOST R 54364-2011: Low-voltage power supply devices, d.c. output. Performance characteristics
GOST R 54365-2011: Round timber. Top diameter and taper method of volume measurement
GOST R 54369-2011: Unified system of standards of computer control systems. Engineering, manufacturing and bringing into operation of the control systems of electrical equipment for supply of workflow of movement of ships through newly reproduced, reconstructed and subjecte
GOST R 54370-2011: Explosive atmospheres. Quality management system of requirement manufacturer. Requirements
GOST R 54371-2011: Safety in electric heating installations. Part 9. Particular requirements for high-frequency dielectric heating installations
GOST R 54372-2011: Safety in electric heating installations. Part 6. Specifications for safety in industrial microwave heating equipment
GOST R 54373-2011: Low-voltage power supplies, d.c. output. Part 6. Requirements for low-voltage power supplies of assessed performance
GOST R 54381-2011: Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer’s performance data
GOST R 54382-2011: Oil and gas industry. Submarine pipeline systems. General requirements
GOST R 54383-2011: Steel drill pipes for petroleum and natural gas industries. Specifications
GOST R 54384-2011: Steel. Definition and classification by chemical composition and classes of quality
GOST R 54389-2011: Stable gas condensate. Specifications
GOST R 54392-2011: Electrical installations of livestock building. Methods of potential equalization
GOST R 54400-2011: Automobile roads of general use. Hot road mastic asphalt. Test methods
GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements
GOST R 54402-2011: Energy conservation. Gas Turbines. General technical requirements
GOST R 54403-2011: Stationary gas turbines for drive of turbogenerators. General specifications
GOST R 54404-2011: Gas pumping units driven with gas turbine. General specifications
GOST R 54405-2011: Stationary steam generators with pressure up to 3,9 MPa. Quality indices of steam
GOST R 54413-2011: Rotating electrical machines. Part 30. Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
GOST R 54415-2011: Equipment for skate grounds. Safety of structure and test methods. General requirements
GOST R 54417-2011: Components of optical fibre transmission systems. Terms and definitions
GOST R 54418.12.1-2011: Wind turbines. Power performance measurements of electricity producing wind turbines
GOST R 54418.21-2011: Renewable power engineering. Wind power engineering. Wind turbines. Part 21. Measurement and assessment of power quality characteristics of grid connected wind turbines
GOST R 54418.22-2014: Renewable power engineering. Wind power engineering. Wind turbine. Part 22. Conformity testing and certification
GOST R 54422-2011: Small craft. Owner’s manual
GOST R 54426-2011: Guidelines for the checking and treatment of sulphur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
GOST R 54427-2011: Technical energy systems. Methods for analysis. Part 2. Weighting and aggregation of energy wares
GOST R 54428-2011: Technical energy systems. Methods for analysis. Part 1. Basic principles
GOST R 54429-2011: Symmetrical telecommunication cables for digital communication. General specification
GOST R 54430-2011: Metal-working and woodworking equipment. Energy efficiency indicators. Nomenclature. Methods for determining the values and valuations
GOST R 54431-2011: Metal-working machines. General safety requirements
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 54433-2011: Renovable power engineering. Wind power plants. Maintenance safety requirements
GOST R 54434-2011: Railway application. Rolling stock equipment. Shock and vibration
GOST R 54435-2011: Wind power plant constructions. Base safety requirements
GOST R 54436-2011: Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for humidity endurance cyclic tests
GOST R 54437-2011: Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for resistance to air pressure tests
GOST R 54438-2011: Gas-fired central heating boilers. Additional requirements for the domestic water heaters jointly with boilers of nominal heat input not exceeding 70 kW
GOST R 54439-2011: Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW
GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking
GOST R 54441-2011: Heating boilers. Part 2. Heating boilers with forced draught burner. Special requirements for boilers with atomizing oil burners
GOST R 54442-2011: Heating boilers. Part 3. Gas-fired central heating boilers. Assembly comprising boiler body and a forced draught burner. Testing of heat engineering
GOST R 54444-2011: Heating boilers. Part 7. Boilers with gas burners with forced air central heating supply with a thermal input not exceeding 1000 kW
GOST R 54447-2011: Non-domestic gas-fired overhead luminous radiant heaters. Part 2. Rational use of energy
GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements
GOST R 54455-2011: Alarm systems. Environmental test methods
GOST R 54459-2011: Global navigation satellite systems. Differential correction systems. General technical requirements
GOST R 54461-2011: Dependability of railway traction rolling stock. Terms and definitions
GOST R 54463-2011: Pасkages from рареrboard and composite materials for food-stuffs. Speсifiсаtiоns
GOST R 54466-2011: Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods
GOST R 54467-2011: Thick building materials and products of high and medium thermal resistance. Methods for determination of thermal resistance by means of guarded hot plate and heat flow meter
GOST R 54468-2011: Flexible pipes with thermal insulation for district heating, hot and cold water networks. General specifications
GOST R 54469-2011: Building materials and products of high and medium thermal resistance. Methods of determination of thermal resistance by means of guarded hot plate and heat flow meter
GOST R 54470-2011: Glass containers for canned food products. General specifications
GOST R 54471-2011: Document management. Information stored electronically. Recommendations for trustworthiness and reliability
GOST R 54473-2011: Nanocoatings of cutting tools based on diamond and cubic boron nitride. General technical requirements and test methods
GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
GOST R 54476-2011: Soils. Methods of laboratory determination of characteristics of shear resistance of soils in road construction
GOST R 54477-2011: Soils. Methods for laboratory determination of soil deformation characteristics in road construction
GOST R 54480-2011: Non-grain oriented electrical steel strip. Specifications
GOST R 54482-2011: Piping connections for general-use hydraulic fluid power. Hose fittings with metric stud ends and O-ring. Technical requirements
GOST R 54483-2011: Oil and gas industry. Offshore platforms for oil and gas production. General requirements
GOST R 54487-2011: Non-destructive testing. Evaluation of gas porosity in aluminium casting alloys by ultrasound. General requirements
GOST R 54488-2011: Adjustable wrenches. Specifications
GOST R 54489-2011: Circular saws for cutting logs machines and automatic lines. General technical requirements
GOST R 54490-2011: Superhard tipped circular saws for machining wood materials and plastics. General specifications
GOST R 54493-2011: Iridium. Rhodium. Ruthenium. Method for determination of mass loss after ignition
GOST R 54495-2011: Glass and glass products. Fire resistance test method
GOST R 54496-2011: Water. The determination of toxicity with use of green freshwater unicellular algae
GOST R 54499-2011: Drinking water. Luminescent method for determination of uranium content
GOST R 54500.1-2011: Uncertainty of measurement. Part 1. Introduction to guides on uncertainty in measurement
GOST R 54501-2011: Complex quality control system. Control of technological processes of manufacturing materials and semi-finished product at enterprises-suppliers. General requirements
GOST R 54504-2011: Functional safety. Policy and programme of safety provision. Safety proof of the railway objects
GOST R 54506-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test method for ignition in a confined space
GOST R 54507-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test method for spray aerosols to determine the distance at which ignition occurs
GOST R 54508-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test method for pyrophoric solids
GOST R 54509-2011: Classification of chemicals which hazard is caused by physical and chemical properties. Test methods of chemicals, which consists of organic matter (self-reactive chemicals and organic peroxides)
GOST R 54510-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test method for flammability of aerosol foam
GOST R 54511-2011: Classification of chemicals hazardous due to their physical and chemical properties. Method of determining the corrosive properties of chemicals
GOST R 54512-2011: Classification of chemicals hazardous due to their physical and chemical properties. Determination of ability of chemicals to emit flammable gases in contact with water
GOST R 54513-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test method for pyrophoric liquids
GOST R 54514-2011: Classification of chemicals hazardous due to their physical and chemical properties. Method of determining of ability of chemicals to the oxidative self-heating
GOST R 54515-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test of oxidizing chemicals in solid state
GOST R 54516-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test of oxidizing liquids
GOST R 54517-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test methods of flammable chemicals in solid state
GOST R 54518-2011: Food products, feeds, food raw materials. Method of the determination of the coccidiastats content by high performance liquid chromatography-mass spectrometry (HPLC-MS)
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 54528-2011: Refractory products with a true porosity of less than 45 %. Method for determination of permanent change in dimensions on heating
GOST R 54530-2011: Resources saving. Packaging. Requirements, criteria and test scheme through composting and biodegradation
GOST R 54532-2011: Resources saving. Waste treatment. Waste classification and management in footwear manufacturing
GOST R 54533-2011: Resources saving. Waste management. Guidelines and methods for the recovery of plastics waste
GOST R 54534-2011: Resources saving. Sewage sludge. Requirements for recultivation of disturbed lands
GOST R 54535-2011: Resources saving. Sewage sludge. Requirements for waste dispose and use at landfills
GOST R 54536-2011: Quality management systems. Cross-sectorial requirements
GOST R 54542-2011: Cover paper for exercise- books. General specifications
GOST R 54548-2011: Isoprene rubber (IR). Preparation and testing of rubber compounds
GOST R 54550-2011: Synthetic rubbers. Determination of the mass fraction of extractables
GOST R 54555-2011: Styrene-butadiene rubber (SBR). Preparation and testing of rubber compounds
GOST R 54556-2011: Acrylonitrile-butadiene rubbers (NBR). Preparation and testing of rubber compounds
GOST R 54557-2011: Isobutene-isoprene rubber (IIR). Preparation and testing of rubber compounds
GOST R 54558-2011: Solution-polymerized butadiene rubber (BR). Preparation and testing of rubber compounds
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54561-2011: Hygienic coatings of containers used for food products transportation and storage. General technical requirements
GOST R 54562-2011: Chlorinated lime. Specifications
GOST R 54563-2011: Paint materials. Determination of adhesive by cross-cut method
GOST R 54566-2011: Steel. Standard test methods for estimating the depth of decarburized layer
GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications
GOST R 54570-2011: Steels. Assessing the degree of banding or orientation of microstructures
GOST R 54574-2011: Steel drums for paint materials. Specifications
GOST R 54577-2011: Modified wood. Specifications
GOST R 54578-2011: Workplace air quality. Predominantly fibrogenic aerosols. General principles for hygienic regulation, monitoring and evaluation
GOST R 54579-2011: Acoustics. Application of new measurement methods in building and room acoustics
GOST R 54580-2011: Air transport. Requirements and procedures for measuring mass of the aircraft in the operational process. Main principles
GOST R 54584-2011: Means of underwater lighting. General specifications
GOST R 54585-2011: Ship's electrical equipment. Safety requirements, control and test methods
GOST R 54586-2011: Paint materials. Method for determination of paint film hardness by pencil test
GOST R 54594-2011: Offshore platforms. Rules of Inhabitation. General requirements
GOST R 54596-2011: Personnel means of saving of crews of engineering. Installations operated in water areas. Specifications
GOST R 54597-2011: Workplace atmospheres. Ultrafine aerosols, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment
GOST R 54600-2011: Tourist services. Service of travel agencies. General requirements
GOST R 54601-2011: Tourist service. Security of active types of tourism. General
GOST R 54606-2011: Services of small means of placing. Generic requirements
GOST R 54610-2011: Services to the population. Classification and the basic requirements to the services given at municipal level
GOST R 54612-2011: Passenger cars on locomotive traction and railcars. Washing and cleaning requirements
GOST R 54613-2011: Air transport. Individual and group saving swimming craft (rafts) of civil aircrafts. General technical requirements
GOST R 54614-2011: Air transport. Alarm means facilitating detection of civil aircrafts which have suffered disaster in day and night conditions (pyrotechnic, radio-, light-reflecting, stroboscopic lamps, streamers). General requirements
GOST R 54615-2011: Air transport. Auxiliary means for evacuation of passengers of civil aircraft (gangways). Technical requirements
GOST R 54616-2011: Air transport. Characteristics of marks of evacuation way for passengers of civil aircrafts («the light path»). General requirements
GOST R 54617.1-2011: Risk management in nanoindustry. General principles
GOST R 54617.2-2011: Enterprise management in nanoindustry. Identification of hazards
GOST R 54618-2011: Global navigation satellite system. Road accident emergency response system. Compliance test methods of in-vehicle emergency call system/device for electromagnetic compatibility, environmental and mechanical resistance requirements
GOST R 54625-2011: Global navigation satellite system. Computer-aided navigation systems for motor transport and urban electric transport. Classification
GOST R 54635-2011: Functional food products. Method of vitamin А determination
GOST R 54650-2011: Soils. Determination of mobile phosphorus and potassium compounds by Kirsanov method modified by CINAО
GOST R 54651-2011: Organic fertilizers on basis of sewage sludge. Specifications
GOST R 54659-2011: Conformity assessment. Rules for services (works) voluntary certification
GOST R 54671-2011: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Terms and definitions
GOST R 54707-2011: Digital audio broadcasting system DRM. Single-channel simulcast transmission of programs (SCS)
GOST R 54709-2011: Digital audio broadcasting system DRM. Specific restrictions for the use of the distribution and communication protocol (DCP)
GOST R 54718-2011: Digital broadcasting system DRM in the frequency range less than 30 MHz Digital encoder-modulator. Basis parameters and technical requirements
GOST R 54720-2011: Railway telecommunications. Suspension rules of self-supporting optical waveguide cable on railway contact-line masts and power lines with voltage over 1000 V
GOST R 54721-2011: Global navigation satellite system. Accident emergency response system. General base service description
GOST R 54722-2011: Global navigation satellite system. Dispatcher control systems for urban passenger transports. Purpose, composition and specifications mapping support subsystem
GOST R 54732-2011: Quality management. Customer satisfaction. Guidelines for monitoring and measuring
GOST R 54740-2011: Wine production. The method of determining of the sulphates
GOST R 54745-2011: Explosive atmospheres. Part 20-2. Material characteristics. Combustible dusts test methods
GOST R 54747-2011: Ferro-concrete cross ties for railways for 1520 mm gauge railways. General specifications
GOST R 54748-2011: Crushed stone from rocks for railway ballast. Specifications
GOST R 54749-2011: Coupler and automatic coupler device of railway rolling stock. Technical requirements and acceptance rules
GOST R 54764-2011: Lifts and escalators. Energy efficiency
GOST R 54765-2011: Escalators and moving walks. Safety requirements for construction and installation
GOST R 54767-2011: Cranes. Test code and procedures
GOST R 54768-2011: Cranes. Requirements for test loads
GOST R 54769-2011: Cranes. General requirements for stability
GOST R 54772-2011: Supple mining main vents and shaped components for them. General technical requirements and test methods
GOST R 54773-2011: Anchor supports. Test methods for anchor
GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods
GOST R 54776-2011: Occupational safety standards system. Equipment and facilities for prevention and localization explosions of dust-air mixtures in coal mines dangerous on gas and dust. General technical requirements. Safety requirements and test methods
GOST R 54777-2011: Automatic systems for explosions localization and suppression of methane-dust-air mixture explosions in coal mines. General technical requirements. Test methods
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 54787-2011: Nanodimensional processing of precision details. Production requirements
GOST R 54788-2011: Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Part 1. Safety
GOST R 54789-2011: Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Part 2. Rational use of energy
GOST R 54790-2011: Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Part 3. Externally loaded tests
GOST R 54791-2011: Gas welding equipment used in welding, cutting and allied processes. Pressure regulators and pressure regulators with flow-metering devices for manifold systems and gas cylinders up to 300 bar (30 МРа)
GOST R 54792-2011: Imperfections in thermoplastic welding joint. Description and evaluation
GOST R 54797-2011: Boxes high-voltage passenger cars for locomotive traction and multiple units. The general technical requirements
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 54801-2011: Traction transformers and inductors on board railway rolling stock. Basic parameters and test methods
GOST R 54805-2011: Centrifugal pumps. Technical specifications. Class II
GOST R 54806-2011: Centrifugal pumps. Technical specifications. Class I
GOST R 54807-2011: Vacuum technology. Standard methods for measuring vacuum-pump performance
GOST R 54808-2011: Pipeline valves. Leakage rates of valves.
GOST R 54809-2011: Traffic control devices. Road marking. Test methods
GOST R 54810-2011: Motor vehicles. Fuel economy. Test methods
GOST R 54811-2011: Electromobiles. Test methods for active and passive safety
GOST R 54812-2011: Auxiliary and emergency marine diesel-generator sets. Types and basic parameters. General technical requirements
GOST R 54813-2011: Electric cables, wires and cords. Spark test method
GOST R 54814-2011: Light emitted diodes and light emitting diode modules for general application. Terms and definitions
GOST R 54815-2011: Self-ballasted LED-lamps for general lighting services by voltage over 50 V. Operating requirements
GOST R 54816-2011: Information and communication technologies in education. Educational technics. General statements
GOST R 54818-2011: Information and communication technologies in education. Information and communication technological systems educational buildings. General statements
GOST R 54820-2011: Heating boilers. Test code for heating boilers for atomizing oil burners
GOST R 54825-2011: Gas-fired central heating boilers. Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW
GOST R 54827-2011: Dry-type transformers. General specifications
GOST R 54828-2011: Gas-insulated metal-enclosed switchgear for nominal voltages above 110 kV. General technical specification
GOST R 54830-2011: Video surveillance systems. Video data compression. General technical requirements and methods of algorithm evaluation
GOST R 54831-2011: Control access systems. Controlled barrier units. General technical requirements. Test methods
GOST R 54833-2011: Automatics and telemechanics railway systems on rail classification yards. Safety requirements and methods of checking
GOST R 54834-2011: Equipment for bank protection. Mobile cash operation terminals. General technical requirements
GOST R 54847-2011: Children’s playgrounds equipment and surfacing. Сableway’s safety of structure and test methods. General requirements
GOST R 54848-2011: See attached file. General specifications. Тest methods
GOST R 54850-2011: Roof windows and skylights. Method for determination of reduced of thermal resistance
GOST R 54851-2011: Building envelope in similar. Calculation reduced total thermal resistances
GOST R 54853-2011: Bulidings and structures. Method for determination of thermal resistance and thermal coefficient of enclosing structures with assistance of heat flow meter
GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications
GOST R 54855-2011: Building materials and products. Method for determining design thermal value
GOST R 54856-2011: Heat supply of buildings. Methods for calculating systems energy requirements and system efficiencies for heat generation systems with solar systems
GOST R 54857-2011: Buildings and structures. Determination of air change of rooms method of indicator gas
GOST R 54858-2011: Translucent facade construction. Method for determination of thermal transmission resistance
GOST R 54859-2011: Buildings and constructions. Definition of the parameters of the basic tone of free oscillations of buildings
GOST R 54860-2011: Heat supply of buildings. General guidelines of methods for calculation of energy requirements and efficiencies for heat supply systems
GOST R 54861-2011: Windows and external doors. Methods for determination of thermal transmission resistance
GOST R 54863-2011: Shutters and blinds. Additional thermal resistance determination
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54865-2011: Heat supply of buildings. Method for calculation of energy requirements and efficiencies for of heat generation with heat pump systems
GOST R 54866-2011: Thermoplastics pipes. Determination of the long-term hydrostatic strength on pipe samples by extrapolation method
GOST R 54867-2011: Multilayer plastics pipes. Determination of the long-term strength
GOST R 54869-2011: Project management. Requirements for project management
GOST R 54870-2011: Project management. Requirements for projects portfolio management
GOST R 54871-2011: Project management. Requirements for program management
GOST R 54872-2011: Nonwoven fabrics and products. Absorption determination method
GOST R 54876-2011: Knowledge management. Guide to securing correlation between knowledge management and the standard of organization and other organizational processes
GOST R 54881-2011: Guidelines for auditing of quality management systems of medical device manufacturers to conform to regulating requirements. Part 3. Audit report
GOST R 54887-2011: Guidelines to diligent practice for control tests of production (for test laboratories and test centres)
GOST R 54889-2012: Reusable semirigid slings. Specifications
GOST R 54890-2012: Timber transportation packages. Sizes
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.
GOST R 54897-2012: Automatics and telemechanics railway systems on railway stations. Safety requirements and methods of checking
GOST R 54898-2012: Automatics and telemechanics railway systems on railway crossings. Safety requirements and methods of checking
GOST R 54899-2012: Centralised traffic and dispatching control systems movement of trains. Safety requirements and methods of checking
GOST R 54900-2012: Automatics and telemechanics railway systems on stages of railroad lines. Safety requirements and methods of checking
GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements
GOST R 54907-2012: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Basic principles
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
GOST R 54910-2012: Gas-condensate and oil-and-gas-condensate deposits. Gas-condensate characteristics of hydrocarbons. Terms and definitions
GOST R 54912-2012: Modified wood for bear of slide. Specifications
GOST R 54913-2012: Modified wood. Method for determination of pressure in swelling
GOST R 54930-2012: Development of service standards. Recommendation for addressing consumer issues
GOST R 54932-2012: Acoustical barriers for railway transport. Methods of control
GOST R 54934-2012: Occupational health and safety management systems. Requirements
GOST R 54937-2012: Guidelines for standards developers to address the needs of older persons and persons with disability
GOST R 54938-2012: Railway telecommunication. Protection regulation of lines communication against influence of a traction network of the electrified railways constant and alternating current
GOST R 54943-2012: Buildings and structures. Method for determining discomfort glare rating in interior lighting
GOST R 54944-2012: Buildings and structures. Methods for mеаsurement the illuminance
GOST R 54945-2012: Buildings and structures. Methods for mеаsurement of illuminance pulsation factor
GOST R 54957-2012: Railway telecommunications. General safety requirements
GOST R 54958-2012: Railway telecommunications. Safety requirement control methods
GOST R 54962-2012: Railway rolling stock driver’s (operator's) armchair. Specifications
GOST R 54963-2012: Reinforcing alkali-resistant glass fibre meshes for building faces. Method for determination of the mechanical properties
GOST R 54964-2012: Conformity assessment. Ecological requirements for estate properties
GOST R 54965-2012: Cables and wires for rolling stock of railway transport. General specifications
GOST R 54977-2019: Mining equipment. Multifunctional coal mine safety systems. Terms and Definitions
GOST R 54983-2012: Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
GOST R 54985-2012: Guidelines for small businesses on implementation of quality management system based on ISO 9001:2008
GOST R 54990-2012: Social services of the population. Rehabilitation services for persons addicted to drugs, psychotropic substances and alcohol. Basic types of social services
GOST R 54999-2012: Lifts. General Requirements for maintenance instruction
GOST R 55001-2012: General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests
GOST R 55009-2012: Energy efficiency. Centrifuges appliances and similar. Indicators of energy efficiency and determination methods
GOST R 55015-2012: Power transformers. Tanks leakage tests
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
GOST R 55023-2012: Pipeline valves. Home regulators of pressure. General specifications
GOST R 55026-2012: Design of fans working in potentially explosive atmospheres
GOST R 55028-2012: Public roads and highways. Geosynthetic for road construction. Classification, terms and definitions
GOST R 55029-2012: Public roads and highways. Geosynthetic for reinforcement of asphalt layers of road pavement. Technical requirements
GOST R 55030-2012: Public roads and highways. Geosynthetic for road construction. Test method for tensile strength
GOST R 55033-2012: Public roads and highways. Geosynthetic for road construction. Test method for determination of flexibility at low temperature
GOST R 55034-2012: Public roads and highways. Geosynthetic for reinforcement of asphalt layers of road pavement. Test method for determination of heat resistance
GOST R 55042-2012: Non-destructive testing. Evaluation of metallic coating thickness by ultrasound. General requirements
GOST R 55044-2012: Technical diagnostics. Selection of test items for the calibration of equipment for measuring the stress-strain state of structural materials. General requirements
GOST R 55048-2012: Quality management systems. Particular requirements for the application of GOST R ISO 9001-2008 in construction
GOST R 55050-2012: Railway rolling stock. Permissible exposure norms to the railway track and test methods.
GOST R 55057-2012: Railway transport. Rolling stock. Terms and definitions
GOST R 55061-2012: Electromagnetic compatibility of technical equipment. Static transfer system. Part 2. Requirements and test methods
GOST R 55064-2012: Sodium hydroxide for industrial use. Specifications
GOST R 55073-2012: Resistance polymer composites for repairing industrial pipe-line. Specifications
GOST R 55103-2012: Resource saving. Efficient control of resources. Basic regulation
GOST R 55105-2012: United power system and isolated working systems. Operative-dispatch management. Automatic emergency control of modes of power systems. Emergency control of power systems. Norms and requirements
GOST R 55139-2012: Electromagnetic compatibility of technical equipment. Resistance welding equipment. Part 2. Requirements and test methods
GOST R 55176.4.2-2012: Electromagnetic compatibility of technical equipment. Railway systems and equipment. Part 4-2. Emission and immunity of telecommunication equipment. Requirements and test methods
GOST R 55182-2012: Passenger cars on locomotive traction. General technical requirements
GOST R 55183-2012: Passenger cars on locomotive traction. Fire safety requirements
GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST R 55201-2012: Safety in emergencies. Procedure for the development of a list of measures for civil defence, measures for prevention of natural and man-caused emergencies in capital construction design
GOST R 55227-2012: Water. Methods for determination of formaldehyde content
GOST R 55234.2-2013: Practical aspects of management of risk. Biorisk management
GOST R 55235.3-2012: Practical aspects of business continuity management. Code of practice for information and communications technologies
GOST R 55236.2-2012: Ergonomics of everyday products. Part 2. Test method for walk-up-and-use products
GOST R 55236.3-2012: Ergonomics of everyday products. Part 3. Test method for consumer products
GOST R 55238-2012: Industrial automation systems and integration. Open technical dictionaries and their application to master data. Part 40. Master data representation
GOST R 55245-2012: Factory surveillance service operational and ruling documents. Guidance for factory inspectors
GOST R 55253-2012: Air transport. Non-destructive testing of aircraft. Requirements for the application, organization and performance of test
GOST R 55260.1.8-2013: Hydro power plants. Part 1-8. Hydroelectic power stations. The general rules of the organization of building manufacture at erection
GOST R 55266-2012: Electromagnetic compatibility of technical equipment. Telecommunication network equipment. Requirements and test methods
GOST R 55272-2012: Quality management systems. Guidelines for structure and composition of elements
GOST R 55311-2012: Petroleum and natural gas industries. Offshore oil and gas field structures. Terms and definitions
GOST R 55364-2012: Electric locomotives. General technical requirements
GOST R 55369-2012: Railway automatics and telemechanics equipment. General technical requirements
GOST R 55375-2012: Primary aluminium and alloys based on it. Grades
GOST R 55409-2013: Reinforced bitumen sheets for waterproofing of bridge decks. Test method for determination of heat resistance
GOST R 55469-2013: Conformity assessment-guidance on the use of an organizations quality management system in product certification
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 55475-2013: Dewaxed winter and arctic diesel fuel. Specifications
GOST R 55542-2013: System of national standards for quality of telecommunication services. Management of quality communications services. Monitoring of quality communications services
GOST R 55543-2013: System of national standards for quality of telecommunication services. Management of quality of communications services. General provisions
GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements
GOST R 55964-2014: Lifts. General safety requirements in service
GOST R 55964-2022: Elevators. General safety requirements for operation
GOST R 55991.1-2014: In vitro diagnostics medical devices. Part 1. Automatic analysers for biochemical assays. Technical requirements for public procurement
GOST R 55991.2-2014: In vitro diagnostics medical devices. Part 2. Automatic analyser for immunoassays. Technical requirements for public procurement
GOST R 55991.3-2014: In vitro diagnostics medical devices. Part 3. Automatic analysers for bimolecular assays. Technical requirements for public procurement
GOST R 55991.4-2014: In vitro diagnostics medical devices. Part 4. Automatic analysers for coagulation tests. Technical requirements for public procurement
GOST R 55991.5-2014: In vitro diagnostics medical devices. Part 5. Automatic analysers for blood gas, metabolite and acid-base balance assessment. Technical requirements for public procurement
GOST R 55991.6-2014: In vitro diagnostics medical devices. Part 6. Automatic analysers for haematology tests. Technical requirements for public procurement
GOST R 55991.7-2014: In vitro diagnostics medical devices. Part 7. Automatic analysers for general clinical tests. Technical requirements for public procurement
GOST R 55999-2014: In-line inspection of gas pipelines. General requirements
GOST R 56040-2014: Conformity assessment. The requirements for training programs of certification experts of products, services, processes
GOST R 56041-2014: Conformity assessment. The requirements for training programs of certification experts of products, services, processes
GOST R 56086.1-2014: System of national standards of social accountability of telecommunication companies. General provisions
GOST R 56087.4-2014: System of national standards for quality of telecommunication services. Quality of services of local, long-distance and international telephone communication. Normative values for quality indices of telephone calls
GOST R 56087.5-2014: System of national standards for quality of telecommunication services. Quality of service of cellular mobile communication. Normative values for quality indices
GOST R 56295-2014: Energy performance of buildings. Economic evaluation technique for energy systems in buildings
GOST R 56379-2015: Floors. Test method of bearing ability
GOST R 56401-2015: Aircraft. Standard practice for approval of new aviation fuels and lubricants in aircraft
GOST R 56532-2015: Conformity assessment. Recommendations for the adoption of the declaration of products conformity to statutory requirements
GOST R 56541-2015: Conformity assessment. General rules of product identification for the purposes of conformity assessment (attestation) to technical regulations requirements of the custom union
GOST R 56602-2015: Low voltage systems. Cable system. Terms and definitions
GOST R 56677-2015: Means of physical protection engineering. Coding, identification and marking. General requirements
GOST R 56707-2015: Facade’s thermo insulation composite systems with external mortar layers. General specifications
GOST R 56765-2015: Exhibition and trade fair activities. Basic provisions
GOST R 56828.15-2016: Best available techniques. Terms and definitions
GOST R 56828.29-2017: Best available techniques. Energy saving. The order of definition of indicators energy efficiency
GOST R 56836-2016: Conformity assessment. Rules for cements certification
GOST R 56847-2015: Pulp making processes. Waste norms
GOST R 56937-2016: Conformity assessment. Rules for the voluntary certification of persons
GOST R 56943-2016: Elevators. General security requirements for the device and installation. Lifts for transportation of goods
GOST R 56946-2016: Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
GOST R 57074-2016: The estimate of efficiency for the water safeguarding work. Criterions of estimate
GOST R 57078-2016: Conformity assessment. General assessment (confirmation) equipment used in biotechnology
GOST R 57096-2016: Conformity assessment. Guidelines for certification of gates for football, handball, mini-football and field hockey
GOST R 57109-2016: Inland water transport. Control of technical condition and safety assessment of hydraulic structures of inland water transport. Safety requirements
GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control
GOST R 57518-2017: Conformity assessment. Rules and procedures for the voluntary certification of catering services
GOST R 57519-2017: Conformity assessment. Rules and procedures for the voluntary certification services in the field of tourism
GOST R 57520-2017: Conformity assessment. Rules and procedures for the voluntary certification of trade services
GOST R 57619-2017: Conformity assessment. Guidance on the content and application forms of documents used in the voluntary certification of services (works)
GOST R 57700.2-2017: Numerical simulation for the development and commissioning of high-tech industrial products. Software certification. General provisions
GOST R 57793-2017: United power system and isolated power systems. Hydraulic and pumped storage power stations. Hydraulic engineering structures. Monitoring and assessment of technical condition during operation. Main provisions
GOST R 57818-2017: Design standards of buildings and constructions for gas processing industry
GOST R 57881-2023: Combating Illicit Trafficking in Industrial Products. Terms and definitions
GOST R 57960-2017: Rehabilitation of disabled people. Evaluation of Rehabilitation Services Outcomes. Fundamentals
GOST R 57974-2017: Production services. Organization of health checks of the systems and installations for fire protection of buildings and structures. General requirements
GOST R 58045-2017: Aircraft equipment. Risk management for quality assurance through life cycle stages. Risk assessment methods and acceptability criteria
GOST R 58050-2017: Aircraft equipment. Risk management for quality assurance through life cycle stages. Areas of uncertainty classification
GOST R 58065-2022: Conformity assessment. Certification rules for heating radiators and heating convectors
GOST R 58092.3.2-2023: Systems of electric energy accumulation. Design and evaluation of operating parameters. Powerful applications and integration with renewable energy sources
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58137-2018: Automobile roads of general use. Guidelines for risk assessment during the life cycle
GOST R 58176-2018: Electric industry. Energy construction. Organisation of commissioning of thermal power plants. General requirements
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58178-2018: The preservation of cultural heritage objects. Accessibility of cultural heritage objects for people with limited mobility. General requirements
GOST R 58184-2018: Project management system. Fundamentals
GOST R 58258-2018: Rehabilitation of disabled persons. Rehabilitation and habilitation system for disabled persons and disabled children. Fundamentals
GOST R 58259-2018: Rehabilitation of disabled persons. Evaluation of the effectiveness of the system of rehabilitation of disabled persons and habilitation of disabled children
GOST R 58264-2018: Rehabilitation of disabled persons. Services of rehabilitation centers for children and adolescents with limited opportunities
GOST R 58265-2018: Medical-social expertise. Quality assurance system of medical-social examination institutions
GOST R 58289-2018: Conformity assessment. Electricity Certification Rules
GOST R 58329-2018: Rules for the operation of main condensate pipelines and product pipelines
GOST R 58348-2019: Intellectual property. Countering the spread of counterfeit and counterfeit products in the field of engineering. Requirements for the procurement, acceptance and disposal processes
GOST R 58355-2019: Information and communication technologies in education. Production safety e-learning. Worker Safety Competency Information Model
GOST R 58359-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Technical specifications
GOST R 58388-2019: Composite facade systems with exterior plaster layers. Conformity assessment
GOST R 58490-2019: Quality Management Systems. Certification procedure for production taking into account the requirements of GOST R ISO 9001-2015
GOST R 58507-2019: Electric wheelchairs and scooter. General specifications
GOST R 58526-2019: Quality control of services to children in recreation and health organizations
GOST R 58573-2019: Protection of Nature. Hydrosphere. Water quality. Risk-based control
GOST R 58583-2019: Abrasive wheels. Permissible imbalance. Method of determination and control
GOST R 58639-2019: Conformity assessment. Rules for mandatory confirmation of compliance of civil and service weapons, structurally similar to weapons products and cartridges for them
GOST R 58661-2019: Agricultural products, raw materials and food with improved environmental performance. Conformity assessment
GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications
GOST R 58775-2019: Conformity assessment. Certification Rules for Target Shooting and Sporting
GOST R 58899-2020: Elastic, textile and laminated floor coverings. Main characteristics
GOST R 58903-2020: Roofing structures. Method for determining the resistance of an unexploited roof to the impact on the roof of a pedestrian dynamic load
GOST R 59375.2-2022: Structures for flue gas removal. Requirements for metal structures for flue gas venting. Part 2. Internal metal pipes and fittings
GOST R 59412-2022: Structures for flue gas removal. General requirements
GOST R 59989-2022: Systems Engineering. System analysis of the system quality management process
GOST R 59990-2022: Systems Engineering. System analysis of the project evaluation and control process
GOST R 59991-2022: Systems Engineering. System analysis of the risk management process for the system
GOST R 59992-2022: Systems Engineering. System analysis of the management process of the system lifecycle model
GOST R 59993-2022: Systems Engineering. System analysis of the system infrastructure management process
GOST R 59994-2022: Systems Engineering. System analysis of the quality assurance process for the system
GOST R 66.0.01-2015: Evaluation of experience and business reputation of enterprises. The national system of standards. General principles, requirements and guidelines
GOST R 66.0.01-2017: Evaluation of experience and business reputation of enterprises. The national system of standards.General principles, requirements and guidelines
GOST R 7.0.11-2011: System of standards on information, librarianship and publishing. Dissertation and dissertation abstract. Structure and rules of presentation
GOST R 7.0.14-2011: System of standards on information, librarianship and publishing. Reference Editions. Basic types, structure, publishing and printing presentation
GOST R 7.0.4-2006: System of standards on information, librarianship and publishing. Editions. Imprints. General requirements and rules of presentation
GOST R 7.0.49-2007: System of standards on information, librarianship and publishing. National Index for scientific and technical information. Structure, rules for use and maintenance
GOST R 7.0.5-2008: System of standards on information, librarianship and publishing. Bibliographic reference. General requirements and rules of making
GOST R 7.0.7-2009: System of standards on information, librarianship and publishing. Articles in journals and collections. Publisher's presentation
GOST R 70055-2022: Small wheelchairs. General technical conditions
GOST R 70056-2022: Mattresses and anti-decubitus pillows. General technical conditions
GOST R 70192-2022: Dry frame cladding frame ceilings. Steel cold-formed galvanized steel frame flooring system. General technical requirements
GOST R 70219-2022: Safety of congresses, exhibitions and fairs. Main provisions and requirements
GOST R 70336-2022: Diamonds for technical purposes. Technical conditions
GOST R 70366-2022: Protective earthing when working on overhead power lines of high voltage. Technical requirements
GOST R 70524-2022: Land reclamation systems and structures. Rules of acceptance into operation
GOST R 70566-2022: Land reclamation systems and structures. Rules of inspection and monitoring of technical condition
GOST R 70612-2022: Land reclamation systems and hydraulic structures. Methodology of justification of conservation and liquidation expediency
GOST R 70620-2022: Anti-terrorist activities. Terms and definitions
GOST R 70634-2023: Food safety management systems. Set of requirements for food safety management system and certification process
GOST R 70726-2023: Modular swimming pools. General technical conditions
GOST R 71042-2023: Soils. Determination of strength characteristics by simple shear method
GOST R 8.562-2007: State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power and voltage of electromagnetic waves
GOST R 8.612-2005: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the surface density of coatings in the range from 0,001 to 1,000 kg/sq m
GOST R 8.612-2011: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the surface density of coating in the range from 0,0001· to 1,000 kg/sq m
GOST R 8.613-2005: State system for ensuring the uniformity of measurements. Procedures for quantitative chemical analysis of water samples. General requirements for development
GOST R 8.614-2005: State system for ensuring the uniformity of measurements. State service of standard reference data. Basic statements
GOST R 8.615-2005: State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements
GOST R 8.616-2006: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the ultrasound power in water within the frequency range from 0,5 to 12 MHz
GOST R 8.618-2006: State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass flow of gas
GOST R 8.621-2006: State system for ensuring the uniformity of measurements. Building materials and products. Moisture and heat conduction measurement procedure by the dielcometric method
GOST R 8.623-2006: State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedures of measurements at microwave frequencies
GOST R 8.627-2007: State system for ensuring the uniformity of measurements. Measurements of coefficients of regular and diffuse transmittance of ultraviolet radiation. Methods for measurements
GOST R 8.628-2007: State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Requirements for geometrical shapes, linear sizes and manufacturing material selection
GOST R 8.629-2007: State system for ensuring the uniformity of measurements. Nanometre range relief measures with trapezoidal profile of elements. Methods for verification
GOST R 8.630-2007: State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification
GOST R 8.631-2007: State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification
GOST R 8.635-2007: State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration
GOST R 8.636-2007: State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for calibration
GOST R 8.637-2007: State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements
GOST R 8.639-2008: State system for ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Terms and definitions
GOST R 8.640-2008: State system for ensuring the uniformity of measurements. Radiometers of ultraviolet radiation measurements for photolithography technological processes testing. Verification methods
GOST R 8.641-2008: State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments of the water solutions ion content by electrochemical methods (pX measuring instruments)
GOST R 8.642-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
GOST R 8.643-2008: State system for ensuring the uniformity of measurements. Reflectometers for extreme ultraviolet in region 10 - 30 nm. Verification procedure
GOST R 8.645-2008: State system for ensuring the uniformity of measurements. Metrological support of geological study, use and protection of natural underground resources of the Russian Federation. General provisions
GOST R 8.646-2008: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring volume densities of ionized air electric charge and air ion number concentration
GOST R 8.647-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of quantity definition of taken from site of bowels crude oil and oil gas. Basic principles
GOST R 8.648-2008: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring of alternate electrical voltage to 1000 V in the frequency range from 1·10 in minus 2 degree up to 2·10 in 9 degree Hz
GOST R 8.649-2008: State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the content of components in solid and liquid mediums in spectral range from 0,19 to 1,0 mu
GOST R 8.650-2008: State system for ensuring the uniformity of measurements. Measurement of vibration power flow from machines into connected support structures. Part 1. Direct method
GOST R 8.651-2009: State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Procedure of calibration
GOST R 8.653-2009: State system for ensuring the uniformity of measurements. Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Part 2. Indirect method
GOST R 8.654-2009: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.655-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. General specification
GOST R 8.656-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. Methods of verification
GOST R 8.657-2009: State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST R 8.660-2009: State system for ensuring the uniformity of measurements. Industrial application level gauges. Calibration methods
GOST R 8.661-2009: State system for ensuring the uniformity of measurements. Oil moisture meters. Norms of metrological characteristics
GOST R 8.662-2009: State system for ensuring the uniformity of measurements. Natural gas. Gas phase thermodynamic properties. Methods of calculation for transmission and distribution applications on base of the AGA8 fundamental equation of state
GOST R 8.663-2009: State system for ensuring the uniformity of measurements. State verification schedule for force measuring instruments
GOST R 8.665-2009: State system for ensuring the uniformity of measurements. Photo-electric luхmeter and brightness meter. Methods of verification
GOST R 8.666-2009: State system for ensuring the uniformity of measurements. Moisture meters neutron. The method of verification
GOST R 8.667-2009: State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)
GOST R 8.668-2009: State system for ensuring the uniformity of measurements. Volumetric heat (energy) of combustion of natural gas. General requirements for methods for measurement
GOST R 8.669-2009: State system for ensuring the uniformity of measurements. Vibrometers with piezoelectric, induction and eddy current vibrations transducers. Methods of verification
GOST R 8.670-2009: State system for ensuring the uniformity of measurements. Precision inductive transducers for linear dimensions (parameters). Methods of verifications
GOST R 8.672-2009: State system for ensuring the uniformity of measurements. Transducers with electric contacts for measuring the linear dimensions (parameters). Verification methods
GOST R 8.673-2009: State system for ensuring the uniformity of measurements. Intelligent Sensors and Intelligent Measuring Systems. Basic Terms and Definitions
GOST R 8.674-2009: State system for ensuring the uniformity of measurements. General requirements for measuring instruments and systems and devices with measuring function
GOST R 8.675-2009: State system for ensuring the uniformity of measurements. Electromagnetic flow meter. Calibration methods
GOST R 8.676-2009: State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring ethanol content in gaseous and liquid media
GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure
GOST R 8.678-2009: State system for ensuring the uniformity of measurements. Forms of conformity assessment of technical systems and devices with measuring function the specified requirements
GOST R 8.679-2009: State system for ensuring the uniformity of measurements. Technical metallic gauging tanks. Methods of verification
GOST R 8.680-2009: State system for ensuring the uniformity of measurements. Volumetric glassware. Verification procedure
GOST R 8.681-2009: State system for ensuring the uniformity of measurements. State verification schedule for measuring of moisture content of firm and loose materials
GOST R 8.682-2009: State system for ensuring the uniformity of measurements. Standard metallic gauges. Methods of verification
GOST R 8.683-2009: State system for ensuring the uniformity of measurements. Selective electronic voltmeters. Verification methods
GOST R 8.684-2009: State system for ensuring the uniformity of measurements. Electronic analogue pulse voltmeters. Verification methods
GOST R 8.686-2009: State system for ensuring the uniformity of measurements. A.C. balanced bridges. Verification methods
GOST R 8.687-2009: State system for ensuring the uniformity of measurements. D. C. measuring voltage dividers. Verification methods
GOST R 8.689-2009: Quality factors of electric power measuring instruments. State system for ensuring the uniformity of measurements. Test methods and equipment.
GOST R 8.690-2009: State system for ensuring the uniformity of measurements. Use of Proficiency Testing by interlaboratory comparisons for Accreditation in Testing
GOST R 8.692-2009: State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
GOST R 8.694-2010: State system for ensuring the uniformity of measurements. Standard reference materials (substances). General statistical principles of determination of metrological characteristics
GOST R 8.695-2009: State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 2. Verification and calibration of testing machines
GOST R 8.699-2010: State system for ensuring the uniformity of measurements. Quantities, units, scales of measurement, which are used in global navigation satellite system
GOST R 8.700-2010: State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope
GOST R 8.701-2010: State system for ensuring the uniformity of measurements. Liquid purity measuring instruments. Verification procedure
GOST R 8.703-2010: State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles
GOST R 8.704-2010: State system for ensuring the uniformity of measurements. Working dilatometers. Verification procedure
GOST R 8.707-2010: State system for ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Verification procedure
GOST R 8.708-2010: State system for ensuring the uniformity of measurements. Piezosorption hygrometers. Verification procedure
GOST R 8.709-2010: State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
GOST R 8.710-2010: State system for ensuring the uniformity of measurements. Polarimeters and saccharimeters. Verification procedure
GOST R 8.713-2010: State system for ensuring the uniformity of measurements. Metrological assurance of chemical weapons destruction. General requirements for measurement of toxic compounds and their destruction products content in soils
GOST R 8.714-2010: State system for ensuring the uniformity of measurements. Octave-band and fractional-octave-band filters. Technical requirements and test methods
GOST R 8.715-2010: State system for ensuring the uniformity of measurements. State verification schedule for free-fall acceleration measuring means
GOST R 8.716-2010: State system for ensuring the uniformity of measurements. Reflectometers of the extreme ultraviolet radiation for measurements of the characteristics of multilayer nanostructures in the wavelength range 10 to 30 nm. Measurement procedure
GOST R 8.718-2010: State system for ensuring the uniformity of measurements. Taximeters. Verification procedure
GOST R 8.719-2010: State system for ensuring the uniformity of measurements. Tachometers. Verification procedure
GOST R 8.720-2010: State system for ensuring the uniformity of measurements. Optical power meters, optical radiation sources, return loss meters and optical testers for fibre-optical transfer systems. Verification procedure
GOST R 8.722-2010: State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
GOST R 8.726-2010: State system for ensuring the uniformity of measurements. Load cells. Metrological and technical requirements. Tests
GOST R 8.729-2010: State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
GOST R 8.730-2010: State system for ensuring the uniformity of measurements. Interference refractometers for gas analysis. Verification procedure
GOST R 8.732-2011: State system for ensuring the uniformity of measurements. State verification schedule for means measuring inductance
GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements
GOST R 8.734-2011: State system for ensuring the uniformity of measurements. Intelligent sensors and intelligent measuring systems. Methods of metrological self-checking
GOST R 8.735.1-2011: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid substances and materials. Transfer of the units from the state primary standard based on coulometric titration
GOST R 8.736-2011: State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
GOST R 8.738-2011: State system for ensuring the uniformity of measurements. Field geophysical survey. Units of measured quantities
GOST R 8.740-2011: State system for ensuring the uniformity of measurements. Flow rate and quantity of gas. Measurements procedure by turbine, rotary and vortex flow meters and gas meters
GOST R 8.742-2011: State system for ensuring the uniformity of measurements. Measuring installations of 1-st class of moisture content in firm substances and materials. Verification procedure
GOST R 8.745-2011: State system for ensuring the uniformity of measurements. Optics and photonics. Interferometric measurement of optical elements and optical systems. Part 2. Measurement and evaluation techniques
GOST R 8.747-2011: State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 3. Calibration of reference block
GOST R 8.748-2011: State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method
GOST R 8.750-2011: State system for ensuring the uniformity of measurements. State verification schedule for coordinate-temporal measurements means
GOST R 8.752-2011: State system for ensuring the uniformity of measurements. State verification schedule for means measuring torque of force
GOST R 8.753-2011: State system for ensuring the uniformity of measurements. Reference materials of materials (substance). Basic principles
GOST R 8.754-2011: State system for ensuring the uniformity of measurements. Analysers of oxygen dissolved in water. Verification procedure
GOST R 8.755-2011: State system for ensuring the uniformity of measurements. Dispersion content of gas atmospheres. Determination of nanoparticle size by diffusion spectral analysis
GOST R 8.757-2011: State system for ensuring the uniformity of measurements. Condensation hygrometers. The method of verification
GOST R 8.759-2011: State system for ensuring the uniformity of measurements. Measurement of irradiance and dose ultraviolet radiation in photobiology. Procedure of measurements
GOST R 8.761-2011: State system for ensuring the uniformity of measurements. State verification schedule for means measuring the impulse electrical voltage
GOST R 8.762-2011: State system for ensuring the uniformity of measurements. State verification schedule for means measuring the distortion coefficient
GOST R 8.764-2011: State system for ensuring the uniformity of measurements. State and verification schedule for means of measuring electrical resistance
GOST R 8.765-2011: State system for ensuring the uniformity of measurements. State verification schedule for means measuring the airborne sound pressure in frequency range from 2 Hz to 100 kHz
GOST R 8.766-2011: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)
GOST R 8.769-2011: State system for ensuring the uniformity of measurements. Natural gas. Compression factor of gas phase. Method of calculation based on gas physical properties
GOST R 8.770-2011: State system for ensuring the uniformity of measurements. Natural gas. The dynamic viscosity of compressed gas with a known component composition. The method of calculation
GOST R 8.771-2011: State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. The method of verification
GOST R 8.774-2011: State system for ensuring the uniformity of measurements. Disperse composition of liquid media. Determination of particle size by dynamic light scattering
GOST R 8.775-2011: State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles
GOST R 8.777-2011: State system for ensuring the uniformity of measurements. Disperse composition of aerosols and suspensions. Determination of particle size by laser diffraction
GOST R 8.778-2011: State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements
GOST R 8.884-2015: State system of assurance of measurement uniformity. Metrological supervision performed by the metrological services of legal entities. General principles
GOST R 8.892-2015: State system for ensuring the uniformity of measurements. Metrological assurance. Assessment of state at industrial plants, organizations and corporations
GOST R 8.985-2020: State system for ensuring the uniformity of measurements. Standard Reference Service for the Use of Atomic Energy. General Provisions
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
GOST R 9.317-2010: Unified system of corrosion and ageing protection. Metallic coatings. Methods of measurement of ductility
GOST R 9.413-2007: Unified system of corrosion and ageing protection. Paint coatings. Penetrability determination of water-thinned paints at electrodeposition
GOST R 9.518-2006: Unified system of corrosion and ageing protection. Temporary corrosion protection during assembling operations. General requirements
GOST R 9.804-2006: Unified system of corrosion and ageing protection. Products and materials. Methods of laboratory testing for the stability in regards to the deterioration by rodents
GOST R 9.901.3-2007: Unified system of corrosion and ageing protection. Metals and alloys. General requirements for U-bend specimens of stress corrosion testing
GOST R 9.905-2007: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements
GOST R 9.907-2007: Unified system of corrosion and ageing protection. Metals, alloys, metallic coatings. Methods for removal of corrosion products after corrosion tests
GOST R 9.915-2010: Unified system of corrosion and ageing protection. Metals, alloys, coatings, products. Test methods of hydrogen embrittlement
GOST R EN 1005-3-2010: Safety of machinery. Human physical performance. Part 3. Recommended force limits for machinery operation
GOST R EN 1010-1-2009: Printing machinery. Safety requirements for the design and construction. Part 1. General requirements
GOST R EN 1010-3-2009: Printing machinery. Safety requirements for the design and construction. Part 3. Cutting machines
GOST R EN 1107-1-2008: Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of linear dimensional change
GOST R EN 1108-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of form stability under cyclical temperature changes
GOST R EN 1109-2009: Roofing, hydraulic-insulating, flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method determination of water tightness
GOST R EN 1110-2008: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of heat resistance
GOST R EN 1127-2-2009: Explosive atmospheres. Explosion prevention and protection. Part 2. Basic concepts and methodology for mining
GOST R EN 1149-5-2008: Occupational safety standards system. Special protective clothing. Electrostatic properties. Part 5. General specifications
GOST R EN 1177-2006: Impact absorbing playground surfacing. Safety requirements and test methods
GOST R EN 12039-2008: Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of granules to coating layer adhesion
GOST R EN 12074-2010: Welding consumables. Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
GOST R EN 12083-2011: Occupational safety standards system. Respiratory protective devices. Filters with breathing hoses (filters with hoses). Particle filters, gas filters and combined filters. Requirements, testing, marking
GOST R EN 12085-2008: Thermal insulating products for applications in building. Methods for measurement of linear dimensions of test specimens
GOST R EN 12086-2008: Thermal insulating products in building applications. Method for determination of water vapour transmission properties
GOST R EN 12087-2008: Thermal insulating products for building applications. Methods for determination of long term water absorption by immersion
GOST R EN 12088-2010: Thermal insulating products in building applications. Method for determination of long-term moisture absorption by diffusion
GOST R EN 12089-2008: Thermal insulating products for building applications. Method for determination of bending behaviour
GOST R EN 12090-2008: Thermal insulating products for building applications. Method for determination of shear behaviour
GOST R EN 12091-2010: Thermal insulating products in building applications. Method for determination of freeze-thaw resistance
GOST R EN 12177-2008: Liquid petroleum products. Petroleum. Determination of benzene content by method of gas chromatography
GOST R EN 12430-2008: Thermal insulating products for building applications. Method for determination of behaviour under point load
GOST R EN 12431-2008: Thermal insulating products used in building for floating floors. Method for measurement of thickness
GOST R EN 12717-2006: Safety of machine tools. Drilling machines
GOST R EN 12750-2012: Safety of woodworking machines. Four sided planning (longitudinal and milling) machines
GOST R EN 12840-2006: Safety of machine-tools. Manually controlled turning machines with or without automatic control
GOST R EN 12841-2012: Occupational safety standards system. Personal protective equipment against falls from a height. Rope access systems. Rope adjustment devices. General technical requirements. Test methods
GOST R EN 12916-2008: Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection
GOST R EN 12942/A1/A2-2010: Occupational safety standards system. Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. General technical requirements. Test methods. Marking
GOST R EN 12957-2007: Safety of metal-working machine tools. Electrodisharge machines
GOST R EN 1296-2011: Roofing and hydraulic-insulating flexible bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method of artificial ageing by long-term exposure to elevated temperature
GOST R EN 13016-1-2008: Liquid petroleum products. Part 1. Determination of air saturated vapour pressure (ASVP)
GOST R EN 13132-2008: Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
GOST R EN 13205-2010: Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations
GOST R EN 13218-2006: Safety of machine-tools. Stationary grinding machines
GOST R EN 13274-1-2009: Occupational safety standards system. Respiratory protective devices. Methods of test. Part 1. Determination of inward leakage and total inward leakage
GOST R EN 13274-6-2011: Occupational safety standards system. Respiratory personal protective devices. Methods of test. Part 6. Determination of carbon dioxide content of the inhalation air
GOST R EN 13274-7-2009: Occupational safety standards system. Respiratory protective devices. Methods of test. Part 7. Determination of particle filter penetration
GOST R EN 13274-8-2009: Occupational safety standards system. Respiratory protective devices. Test methods. Part 8. Determination of dolomite dust clogging
GOST R EN 13416-2008: Roofing, hydraulic-insulating, flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Rules for sampling
GOST R EN 13463-1-2009: Non-electrical equipment for potentially explosive atmospheres. Part 1. Basic method and requirements
GOST R EN 13463-2-2009: Non-electrical equipment for use in potentially explosive atmospheres. Part 2. Protection by flow restricting enclosure «fr»
GOST R EN 13463-3-2009: Non-electrical equipment for potentially explosive atmospheres. Part 3. Protection by flameproof enclosure «d»
GOST R EN 13463-5-2009: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety “c”
GOST R EN 13463-6-2009: Non-electrical equipment for use in potentially explosive atmospheres. Part 6. Protection by control of ignition source «b»
GOST R EN 13463-8-2009: Non-electrical equipment for use in potentially explosive atmospheres. Part 8. Protection by liquid immersion «k»
GOST R EN 13479-2010: Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials
GOST R EN 13528-1-2010: Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Part 1. General requirements
GOST R EN 13528-2-2010: Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Part 2. Specific requirements and test methods
GOST R EN 13528-3-2010: Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Part 3. Guide to selection, use and maintenance
GOST R EN 13779-2007: Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems
GOST R EN 13788-2007: Safety of metal-working machine tools. Multi-spindle automatic turning machines
GOST R EN 13819-2-2011: Occupational safety standards system. Personal hearing protectors. Acoustic test methods
GOST R EN 13897-2011: Roofing and hydraulic-insulating flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method for determination of water tightness after stretching at low temperature
GOST R EN 13898-2009: Machine tools. Safety. Sawing machines for metal cold cutting
GOST R EN 14078-2010: Liquid petroleum products. Determination of fatty acid methyl esters (FAME) in middle distillates by infrared spectroscopy method
GOST R EN 14103-2008: Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linoleic acid methyl ester contents
GOST R EN 14105-2008: Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents (reference method)
GOST R EN 14111-2010: Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of iodine value
GOST R EN 14130-2010: Foodstuffs. Determination of vitamin C by HPLC
GOST R EN 14331-2010: Liquid petroleum products. Separation and characterization of fatty acid methyl esters (FAME) from middle distillates by method of liquid chromatography and gas chromatography
GOST R EN 1434-1-2006: Heat meters. Part 1. General requirements
GOST R EN 1434-1-2011: Heat meters. Part 2. General requirements
GOST R EN 1434-2-2011: Heat meters. Part 2. Constructional requirements
GOST R EN 1434-3-2011: Heat meters. Part 3: Data exchange and interfaces
GOST R EN 1434-4-2006: Heat meters. Part 4. Pattern approval tests
GOST R EN 1434-4-2011: Heat meters. Part 4. Pattern approval tests
GOST R EN 1434-5-2006: Heat meters. Part 5. Initial verification tests
GOST R EN 1434-6-2006: Heat meters. Part 6. Installation, commissioning, operational monitoring and maintenance
GOST R EN 14594-2011: Occupational safety standards system. Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking
GOST R EN 1496-2012: Occupational safety standards system. Personal protective equipment against falls from a height. Rescue lifting devices. General technical requirements. Test methods
GOST R EN 1497-2012: Occupational safety standards system. Personal protective equipment against falls from a height. Rescue harness. General technical requirements. Test methods
GOST R EN 1498-2012: Occupational safety standards system. Personal fall protection equipment. Rescue loops. General technical requirements. Test methods
GOST R EN 15195-2011: Liquid petroleum products. Middle distillate fuels. Method for determination of ignition delay and derived certain number (DCN) by combustion in a constant volume chamber
GOST R EN 1601-2007: Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography method using the oxygen flame-ionization detector (O-FID)
GOST R EN 1602-2008: Thermal insulating products for building applications. Method for determination of the apparent density
GOST R EN 1604-2008: Thermal insulating products for building applications. Method for determination of dimensional stability under specified temperature and humidity conditions
GOST R EN 1605-2010: Thermal insulating products for building applications. Method for determination of deformation under specified compressive load and temperature conditions
GOST R EN 1606-2010: Thermal insulating products in building applications. Method for determination of compressive creep
GOST R EN 1607-2008: Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST R EN 1608-2008: Thermal insulating products for building applications. Method for determination of tensile strength parallel to faces
GOST R EN 1609-2008: Thermal insulating products for building applications. Method for determination of water absorption by short term and partial immersion
GOST R EN 1710-2009: Equipment and components intended for use in potentially explosive atmospheres in underground mines
GOST R EN 1822-1-2010: High efficiency air filters ЕРА, HEPA and ULPA. Part 1. Classification, performance testing, marking
GOST R EN 1827-2009: Occupational safety standards system. Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only. Requirements. Testing. Marking
GOST R EN 1834-1-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 1. Group II engines for use in flammable gas and vapour atmospheres
GOST R EN 1834-2-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 2. Group I engines for use in underground workings susceptible to fired amp and/or combustible dust
GOST R EN 1834-3-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 3. Group III engines for use in flammable dust atmospheres
GOST R EN 1848-1-2008: Roofing, hydraulic-insulating flexible bitumen-based materials. Methods for determination of length, width and straightness
GOST R EN 1849-1-2009: Roofing, hydraulic-insulating, flexible, bitumen-based materials. Methods for determination of thickness and mass per unit area
GOST R EN 1850-1-2008: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of visual defects
GOST R EN 1850-2-2008: Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of visual defects
GOST R EN 1870-1-2011: Safety of woodworking machines. Circular sawing machines. Part 1. Circular multipurpose saw benches (with and without sliding table), circular dimension saw and circular building site saws
GOST R EN 1891-2012: Occupational safety standards system. Personal protective equipment against falls from a height. Low stretch kernmantel ropes. General technical requirements. Test methods
GOST R EN 1928-2009: Roofing, hydraulic-insulating, flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method determination of water tightness
GOST R EN 1986-1-2011: Electrically propelled road vehicles. Measurement of energy performances. Part 1. Pure electric vehicles
GOST R EN 1986-2-2011: Electrically propelled road vehicles. Measurement of energy performances. Part 2. Hybrid vehicles
GOST R EN 237-2008: Liquid petroleum products. Determination of low lead concentrations by atomic absorption spectrometry
GOST R EN 29053-2008: Acoustical materials. Methods for determination of airflow resistance
GOST R EN 306-2011: Heat exchangers. Methods of measuring the parameters necessary for establishing the performance
GOST R EN 308-2011: Heat exchangers. Test methods for determining the power criteria of air/air and an air/exhaust gas mixture heat recovery devices
GOST R EN 340-2010: Occupational safety standards system. Protective clothing. General technical requirements
GOST R EN 341-2010: Occupational safety standards system. Personal protective equipment against falls from a height. Descender devices. General technical requirements. Test methods
GOST R EN 353-1-2008: Occupational safety standards system. Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor line. Part 1. General technical requirements. Test methods
GOST R EN 353-2-2007: Occupational safety standards system. Guided type fall arresters including a flexible anchor line. Part 2. General technical requirements. Test methods
GOST R EN 354-2010: Occupational safety standards system. Personal protective equipment against falls from a height. Lanyard. General technical requirements. Test methods
GOST R EN 355-2008: Occupational safety standards system. Personal protective equipment against falls from a height. Energy absorbers. General technical requirements. Test methods
GOST R EN 358-2008: Occupational safety standards system. Personal protective equipment against falls from a height. Belts and lanyards for work positioning and restraint. General technical requirements. Test methods
GOST R EN 360-2008: Occupational safety standards system. Personal protective equipment against falls from a height. Retractable type fall arresters. General technical requirements. Test methods
GOST R EN 361-2008: Occupational safety standards system. Personal protective equipment against falls from a height. Full body harnesses. General technical requirements. Test methods
GOST R EN 362-2008: Occupational safety standards system. Personal protective equipment against falls from a height. Connectors. General technical requirements. Test methods
GOST R EN 363-2007: Occupational safety standards system. Personal protective equipment against falls from a height. Fall arrest systems. General technical requirements
GOST R EN 365-2010: Occupational safety standards system. Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
GOST R EN 374-2009: Occupational safety standards system. Personal protection of hands. Protective gloves against chemicals and micro-organisms. General technical requirements. Methods of testing
GOST R EN 379-2011: System of standards for occupational safety. Personal eye and face protection equipment during welding and related processes. Automatic welding filters. General specifications
GOST R EN 397/A1-2010: Occupational safety standards system. Safety helmets. General technical requirements. Test methods
GOST R EN 404-2011: Occupational safety standards system. Respiratory protective devices for self-rescue. Filter self-rescuer from carbon monoxide with mouthpiece assembly. General specifications
GOST R EN 407-2009: Occupational safety standards system. Personal protective means of hands. Protective gloves from heat thermal and fire. Technical requirements. Test methods
GOST R EN 464-2007: Occupational safety standards system. Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles. Method for determination of leak-tightness of gas-tight suits
GOST R EN 50194-2008: Electrical apparatus for the detection of combustible gases in domestic premises. General requirements and control methods
GOST R EN 50303-2009: Group I, equipment protection level Ma intended to remain functional in atmosphere endangered by firedamp and/or coal dust
GOST R EN 511-2010: Occupational safety standards system. Personal protective means of hands. Protective gloves against cold. General technical requirements. Test methods
GOST R EN 547-1-2008: Safety of machinery. Human body measurements. Part 1. Principles for determining the dimensions required for openings for whole body access into machinery
GOST R EN 547-2-2009: Safety of machinery. Human body measurement. Part 2. Principles for determining the opening dimensions required for access into machinery (machinery parts) by body parts
GOST R EN 547-3-2009: Safety of machinery. Human body measurement. Part 3. Anthropometric data
GOST R EN 779-2007: Particulate air filters for general ventilation. Determination of the filtration performance
GOST R EN 813-2008: Occupational safety standards system. Personal protective equipment against falls from a height. Sit harnesses. General technical requirements. Test methods
GOST R EN 818-5-2005: Short link steel chains for lifting purposes. Safety. Part 5. Chain slings of grade 4
GOST R EN 822-2008: Thermal insulating products for building applications. Methods for measurement of length and width
GOST R EN 823-2008: Thermal insulating products for building applications. Methods for measurement of thickness
GOST R EN 824-2008: Thermal insulating products for building applications. Methods for measurement of deviation from squareness
GOST R EN 825-2008: Thermal insulating products for building applications. Methods for measurement of deviation from flatness
GOST R EN 826-2008: Thermal insulating products for building applications. Methods for determination of compression behaviour
GOST R EN 838-2010: Workplace atmospheres. Diffusive samplers for the determination of gases and vapours. Requirements and test methods
GOST R EN 848-1-2011: Safety of woodworking machines. One side milling machines. Part 1. Single spindle milling machines with vertical lower arrangement of spindle
GOST R EN 859-2010: Safety of woodworking machines. Hand fed surface planning machines
GOST R EN 860-2010: Safety of woodworking machines. Outside thickness planning machines
GOST R EN 861-2011: Safety of woodworking machines. Surface planning and thickening machines
GOST R EN 9100-2011: Quality management systems of organizations of aviation, space and defence industries. Requirements
GOST R EN 9101-2011: Quality management systems of organizations of aviation, space and defence industries. Assessment of quality management systems
GOST R EN 9110-2011: Quality management systems. Requirements for aviation maintenance organizations
GOST R EN 9120-2011: Quality management systems of organizations of aviation, space and defence industries. Requirements for distributors of production
GOST R EN 940-2009: Safety of woodworking machines. Combined woodworking machines
GOST R EN ISO 12205-2007: Petroleum products. Determination of the oxidation stability of distillate fuels
GOST R EN ISO 13982-1-2009: Occupational safety standards system. Protective clothing for use against solid particulates. Part 1. Performance requirements for chemical protective clothing providing protection to full body against airborne solid particulates (type 5 clothing)
GOST R EN ISO 13982-2-2009: Occupational safety standards system. Protective clothing for use against solid particulates. Part 2. Test method of determination of inward leakage of aerosols of fine particles into suits
GOST R EN ISO 14596-2008: Petroleum products. Determination of sulphur content by method of wavelength-dispersive X-ray fluorescence spectrometry
GOST R EN ISO 20345-2011: Occupational safety standards system. Feet personal protective means. Safety footwear. Technical requirements
GOST R EN ISO 20846-2006: Petroleum products. Determination of sulfur content by ultraviolet fluorescence method
GOST R EN ISO 20847-2010: Petroleum products. Determination of sulphur content in automotive fuels by energy-dispersive X-ray fluorescence spectrometry
GOST R EN ISO 22854-2010: Liquid petroleum products. Аutomotivemotor gasolines. Determination of hydrocarbon types and oxygenates by method of multidimensional gas chromatography
GOST R EN ISO 2719-2008: Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup
GOST R EN ISO 3405-2007: Petroleum products. Method for determination of distillation characteristics at atmospheric pressure
GOST R EN ISO 7536-2007: Gasolines. Determination of oxidation stability. Induction period method
GOST R IEC 60034-12-2009: Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors
GOST R IEC 60034-14-2008: Electric rotating machines. Part 14. Mechanical vibration of certain types of machines with a rotation axis height of 56 mm or more. Measurements, assessment and limits of vibration
GOST R IEC 60034-2-1-2009: Rotating electrical machines. Part 2-1. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
GOST R IEC 60034-5-2007: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)
GOST R IEC 60050-426-2006: International electrotechnical vocabulary. Chapter 426. Electric equipment for explosive atmospheres
GOST R IEC 60068-2-10-2009: Environmental testing. Part 2-10. Tests. Test J and guidance: Mould growth
GOST R IEC 60068-2-1-2009: Environmental testing. Part 2-1.Tests. Test A: Cold
GOST R IEC 60068-2-2-2009: Environmental testing. Part 2-2. Tests. Test B: Dry heat
GOST R IEC 60068-2-30-2009: Environmental testing. Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GOST R IEC 60068-2-78-2009: Environmental testing. Part-2-78. Tests. Test Cab: Damp heat, steady state
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60079-10-2-2010: Explosive atmospheres. Part 10-2. Classification of areas. Combustible dust atmospheres
GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'
GOST R IEC 60079-13-2010: Explosive atmospheres. Part 13. Equipment protected by pressurized rooms «p»
GOST R IEC 60079-15-2010: Explosive atmospheres. Part 15. Equipment protection by type of protection «n»
GOST R IEC 60079-17-2010: Explosive atmospheres. Part 17. Electrical installations inspection and maintenance
GOST R IEC 60079-18-2012: Explosive atmospheres. Part 18. Equipment protection by encapsulation «m»
GOST R IEC 60079-19-2011: Explosive atmospheres. Part 19. Equipment repair, overhaul and reclamation
GOST R IEC 60079-2-2009: Explosive atmospheres. Part 2. Equipment protection by pressurized enclosure 'p'
GOST R IEC 60079-25-2008: Explosive atmospheres. Part 25. Intrinsically safe systems
GOST R IEC 60079-27-2008: Explosive atmospheres. Part 27. Fieldbus intrinsically safe concept (FISCO)
GOST R IEC 60079-30-2-2009: Explosive atmospheres. Electrical resistance trace heating. Part 30-2. Application guide for design, installation and maintenance
GOST R IEC 60079-31-2010: Explosive atmospheres. Part 31. Equipment dust ignition protection by enclosure «t»
GOST R IEC 60079-33-2011: Explosive atmospheres. Part 33. Equipment protection by special protection «s»
GOST R IEC 60079-35-1-2011: Caplights for use in mines susceptible to firedamp. Part 1. General requirements and test methods in relation to the risk of explosion
GOST R IEC 60079-5-2012: Explosive atmospheres. Part 5. Equipment protection by powder filling «q»
GOST R IEC 60079-6-2012: Explosive atmospheres. Part 6. Equipment protection by oil-immersion «o»
GOST R IEC 60085-2011: Electrical insulation. Thermal evaluation and designation
GOST R IEC 60086-1-2010: Primary batteries. Part 1. General
GOST R IEC 60086-2-2011: Primary batteries. Part 2. Physical and electrical specifications
GOST R IEC 60086-4-2009: Primary batteries. Part 4. Safety of lithium batteries
GOST R IEC 60086-5-2009: Primary batteries. Part 5. Safety of batteries with aqueous electrolyte
GOST R IEC 60095-4-2010: Lead-acid starter batteries. Part 4. Dimensions of batteries for heavy vehicles
GOST R IEC 60122-1-2009: Quartz crystal units of assessed quality. Part 1. Generic specification
GOST R IEC 60127-4-2007: Miniature fuses. Part 4. Universal modular fuse-links for through-hole and surface mount types
GOST R IEC 60227-1-2009: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements
GOST R IEC 60227-5-2009: PVC-insulated cables for rated voltage up to and including 450/750 V. Part 5. Flexible cables (cords)
GOST R IEC 60227-6-2010: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 6. Lift cables and cables for flexible connections
GOST R IEC 60245-1-2009: Rubber insulated cables for rated voltages up to and including 450/750 V. Part 1. General requirements
GOST R IEC 60245-4-2008: Cables with rubber insulation for rated voltage up to and including 450/750 V. Part 4. Cords and flexible cables
GOST R IEC 60245-8-2008: Rubber insulated cables for rated voltages up to and including 450/750 V. Part 8. Cords for applications requiring high flexibility
GOST R IEC 60252-2-2008: AC motor capacitors. Part 2. Motor start capacitors
GOST R IEC 60254-2-2009: Lead-acid traction batteries. Part 2. Dimensions of cells and terminals and marking of polarity on cells
GOST R IEC 60287-1-1-2009: Electric cables. Calculation of the current rating. Part 1-1. Current rating equations (100 % load factor) and calculation of losses. General
GOST R IEC 60287-1-2-2009: Electric cables. Calculation of the current rating. Part 1-2. Current rating equations (100 % load factor) and calculation of losses. Sheath eddy current loss factors for two circuits in flat formation
GOST R IEC 60287-1-3-2009: Electric cables. Calculation of the current rating. Part 1-3. Current rating equations (100 % load factor) and calculation of losses. Current sharing between parallel single-core cables and calculation of circulating current losses
GOST R IEC 60287-2-1-2009: Electric cables. Calculation of the current rating. Part 2-1. Thermal resistance. Calculation of thermal resistance
GOST R IEC 60287-2-2-2009: Electric cables. Calculation of the current rating. Part 2-2. Thermal resistance. A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
GOST R IEC 60287-3-2-2011: Electric cables. Calculation of the current rating. Part 3-2. Sections on operating conditions. Economic optimization of power cable size
GOST R IEC 60287-3-3-2011: Electric cables. Calculation of the current rating. Part 3-3. Sections on operating conditions. Cables crossing external heat sources
GOST R IEC 60297-3-101-2006: Mechanical structures for radio-electronic equipment. Subracks and associated plug-in units. Dimensions of mechanical structures of the 482,6 mm (19 in) series
GOST R IEC 60297-3-102-2006: Mechanical structures for radio-electronic equipment. Injector/extractor handle. Dimensions of mechanical structures of the 482,6 mm (19 in) series
GOST R IEC 60297-3-103-2006: Mechanical structures for radio-electronic equipment. Keying and alignment pin. Dimensions of mechanical structures of the 482,6 mm (19 in) series
GOST R IEC 60297-3-104-2009: Mechanical structures for electronic equipment. Connector dependent interface dimensions of subracks and plug-in units. Dimensions of mechanical structures of the 482,6 mm (19 in) series
GOST R IEC 60331-12-2007: Tests for electric cables under fire conditions. Circuit integrity. Part 12. Apparatus. Fire with shock at a temperature of at least 830 °C
GOST R IEC 60331-31-2007: Tests for electric cables under fire conditions. Circuit integrity. Part 31. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV
GOST R IEC 60332-1-1-2007: Tests on electric and optical fiber cables under fire conditions. Part 1-1. Test for vertical flame propagation for a single insulated wire or cable. Testing equipment.
GOST R IEC 60332-1-2-2007: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
GOST R IEC 60332-1-3-2007: Tests on electric and optical fiber cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles
GOST R IEC 60332-2-1-2007: Tests on electric and optical fibre cables under fire conditions. Part 2-1. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus
GOST R IEC 60332-2-2-2007: Tests on electric and optical fibre cables under fire conditions. Part 2-2. Test for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame
GOST R IEC 60332-3-10-2005: Tests on electric and optical cables under fire conditions. Part 3-10. Flame spread of vertically-mounted bunched wires or cables. Apparatus
GOST R IEC 60332-3-10-2011: Tests on electric and optical fibre cables under fire conditions. Part 3-10. Flame spread of vertically-mounted bunched wires or cables. Apparatus
GOST R IEC 60332-3-22-2005: Tests on electric and optical cables under fire conditions. Рart 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A.
GOST R IEC 60332-3-23-2005: Tests on electric and optical cables under fire conditions. Part 3-23. Flame spread of vertically-mounted bunched wires or cables. Category B
GOST R IEC 60332-3-24-2005: Tests on electric and optical cables under fire conditions. Part 3-24. Flame spread of vertically-mounted bunched wires or cables. Category C
GOST R IEC 60332-3-25-2005: Tests on electric and optical cables under fire conditions. Part 3-25. Flame spread of vertically-mounted bunched wires or cables. Category D
GOST R IEC 60519-1-2005: Safety in electric heating equipment. Part 1. General requirements
GOST R IEC 60580-2006: Medical electrical equipment. Dose area product meters
GOST R IEC 60598-1-2011: Luminaires. Part 1. General requirements and test methods
GOST R IEC 60598-2-13-2010: Luminaries. Part 2-13. Particular requirements. Ground recesses luminaries
GOST R IEC 60601-2-7-2006: Medical electrical equipment. Part 2-7. Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
GOST R IEC 60605-6-2007: Reliability in techniques. Tests for the validity of the constant failure rate and failure intensity
GOST R IEC 60622-2010: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium prismatic rechargeable single cell
GOST R IEC 60623-2008: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells
GOST R IEC 60695-10-2-2010: Fire hazard testing. Part 10-2. Abnormal heat. Ball pressure test
GOST R IEC 60695-2-10-2011: Fire hazard testing. Part 2-10. Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedures
GOST R IEC 60695-2-11-2010: Fire hazard testing. Part 2-11. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products
GOST R IEC 60695-2-2-2011: Fire hazard testing. Part 2. Test methods. Section 2. Needle-flame test
GOST R IEC 60709-2011: Nuclear power plants. Instrumentation and control systems important for safety. Separation
GOST R IEC 60724-2009: Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
GOST R IEC 60745-1-2005: Hand-held motor-operated electric tools. Safety and test methods. Part 1. General requirements
GOST R IEC 60745-1-2009: Hand-held motor-operated electric tools. Safety and test methods. Part 1. General requirements
GOST R IEC 60745-2-11-2008: Hand-held motor-operated electric tools. Safety and test methods. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)
GOST R IEC 60745-2-1-2006: Hand-held motor-operated electric tools. Safety and test methods. Part 2-1. Particular requirements for drills and impact drill machines
GOST R IEC 60745-2-12-2011: Hand-held motor-operated electric tools. Safety and test methods. Part 2-12. Particular requirements for concrete vibrators
GOST R IEC 60745-2-14-2007: Hand-held motor-operated electric tools. Safety and test methods. Part 2-14. Particular requirements for planers
GOST R IEC 60745-2-4-2008: Hand-held motor-operated electric tools. Safety and test methods. Part 2-4. Particular requirements for sanders and polishers other than disk type
GOST R IEC 60745-2-6-2007: Hand-held motor-operated electric tools. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers
GOST R IEC 60755-2012: General requirements for differential (residual) current operated protective devices
GOST R IEC 60793-1-31-2010: Optical fibres. Part 1-31. Measurement methods and test procedures. Tensile strength
GOST R IEC 60793-1-32-2010: Optical fibres. Part 1-32. Measurement methods and test procedures. Coating strippability
GOST R IEC 60811-1-3-2007: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test
GOST R IEC 60811-1-4-2008: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-4. Methods for general application. Test at low temperature
GOST R IEC 60811-2-1-2006: Common test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
GOST R IEC 60811-4-1-2008: Common test methods for insulating and sheathing materials of electric and optical cables. Part 4-1. Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filler content measurement in polyethylene by direct combustion. Measurement of carbon black content by thermogravimetric analysis (TGA). Assessment of carbon black dispersion in polyethylene using a microscope
GOST R IEC 60825-1-2009: Safety of laser products. Part 1. Equipment classification, requirements and user's guide
GOST R IEC 60825-12-2009: Safety of laser products. Part 12. Safety of free space optical communication systems used for transmission of information
GOST R IEC 60825-2-2009: Safety of laser products. Part 2. Safety of optical fibre communication Systems
GOST R IEC 60838-1-2008: Miscellaneous lampholders. Part 1. General requirements and test methods
GOST R IEC 60840-2011: Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV). Test methods and requirements
GOST R IEC 60851-5-2008: Winding wires. Test methods. Part 5. Electrical properties
GOST R IEC 60880-2010: Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions
GOST R IEC 60917-2-3-2009: Mechanical structures for electronic equipment practices. Interface co-ordination dimensions for the 25 mm equipment practice. Dimensions for subracks, chassis, backplanes, front panels and plug-in units
GOST R IEC 60942-2009: Sound calibrators. Specifications and test requirements
GOST R IEC 60945-2007: Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
GOST R IEC 60949-2009: Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
GOST R IEC 60950-1-2005: Information technology equipment. Safety. Part 1. General requirements
GOST R IEC 60950-1-2009: Information technology equipment. Safety. Part 1. General requirements
GOST R IEC 60950-21-2005: Information technology equipment. Safety requirements. Part 21. Remote power feeding
GOST R IEC 60950-22-2009: Information technology equipment. Safety. Part 22. Equipment to be installed outdoors
GOST R IEC 60986-2009: Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30kV (Um = 36 kV)
GOST R IEC 60987-2011: Nuclear power plants. Instrumentation and control systems important to safety. Hardware design requirements for computer-based systems
GOST R IEC 60990-2010: Methods of measurement of touch current and protective conductor current
GOST R IEC 61084-1-2007: Cable trunking and ducting systems for electrical installations. Part 1. General requirements
GOST R IEC 61084-2-1-2007: Cable trunking and ducting systems for electrical installations. Part 2. Particular requirements. Section 1. Cable trunking and ducting systems intended for mounting on walls or ceilings
GOST R IEC 61084-2-2-2007: Cable trunking and ducting systems for electrical installations. Part 2-2. Particular requirements. Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations
GOST R IEC 61084-2-4-2007: Cable trunking and ducting systems for electrical installations. Part 2. Particular requirements. Section 4. Service poles
GOST R IEC 61108-2-2010: Maritime navigation and radio communication equipment and systems. Global navigation satellite systems (GNSS). Part 2. Global navigation satellite system GLONASS. Receiver equipment. Performance standards. Methods of testing and required test results
GOST R IEC 61160-2006: Risk management. Formal design review
GOST R IEC 61161-2009: State system for ensuring the uniformity of measurements. Ultrasonic power in liquids. General requirements to measuring methods in the frequency range 0,5 to 25 MHz
GOST R IEC 61174-2009: Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
GOST R IEC 61191-1-2010: Printed boards assemblies. Part 1. Surface mount and related assembly technologies. General technical requirements
GOST R IEC 61191-2-2010: Printed boards assemblies. Part 2. Surface mount. Technical requirements
GOST R IEC 61191-3-2010: Printed boards assemblies. Part 3. Sectional specification. Requirements for through-hole mount soldered assemblies
GOST R IEC 61191-4-2010: Printed boards assemblies. Part 4. Terminal mounting. Technical requirements
GOST R IEC 61192-1-2010: Soldered electronic assemblies. Workmanship requirements. Part 1. General technical requirements
GOST R IEC 61192-4-2010: Soldered electronic assemblies. Workmanship requirements. Part 4. Terminal assemblies
GOST R IEC 61192-5-2010: Soldered electronic assemblies. Workmanship requirements. Part 5. Rework, modification and repair
GOST R IEC 61207-1-2009: Gas analysers. Expression of performance. Part 1. General
GOST R IEC 61207-6-2010: Gas analysers. Expression of performance. Part 6. Photometric gas analysers
GOST R IEC 61223-3-5-2008: Evaluation and routine testing in medical imaging departments. Part 3-5. Acceptance tests. Imaging performance of computed tomography X-ray equipment
GOST R IEC 61225-2011: Nuclear power plants. Instrumentation and control systems important for safety. Requirements for electrical supplies
GOST R IEC 61226-2011: Nuclear power plants. Instrumentation and control systems important for safety. Classification of instrumentation and control functions
GOST R IEC 61241-0-2007: Electrical apparatus for use in the presence of combustible dust. Part 0. General requirements
GOST R IEC 61241-10-2007: Electrical apparatus for use in the presence of combustible dust. Part 10. Classification of areas where combustible dusts are or may be present
GOST R IEC 61241-11-2009: Electrical apparatus for use in the presence of combustible dust. Part 11. Protection by intrinsic safety «iD»
GOST R IEC 61241-14-2008: Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation
GOST R IEC 61241-17-2009: Electrical apparatus for use in the presence of combustible dust. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)
GOST R IEC 61241-18-2009: Electrical apparatus for use in the presence of combustible dust. Part 18. Protection by encapsulation «mD»
GOST R IEC 61347-1-2011: Lamp control gear. Part 1. General and safety requirements
GOST R IEC 61500-2012: Nuclear power plants. Instrumentation and control important to safety. Data communication in systems performing category A functions
GOST R IEC 61508-1-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 1. General requirements
GOST R IEC 61508-3-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 3. Software requirements
GOST R IEC 61508-4-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 4. Terms and definitions
GOST R IEC 61508-5-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 5. Guidelines for methods of the determination of safety integrity levels
GOST R IEC 61508-7-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 7. Techniques and measures
GOST R IEC 61513-2011: Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
GOST R IEC 61557-3-2006: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance
GOST R IEC 61557-4-2007: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth connection and equipotential bonding
GOST R IEC 61557-5-2008: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth
GOST R IEC 61557-6-2009: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current operated protective devices in TT and TN systems
GOST R IEC 61557-7-2009: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 7. Phase sequence
GOST R IEC 61559-2-2012: Radiation protection instrumentation in nuclear facilities. Centralized systems for continuous radiation/control. Part 2. Requirements for discharge, environmental, accident or post-accident monitoring functions
GOST R IEC 61643-12-2011: Low-voltage surge protective devices. Part 12. Surge protective devices connected to low-voltage power distribution systems. Selection and application principles
GOST R IEC 61650-2007: Reliability in techniques. Procedures for comparison of constant failure rates and constant failure intensities
GOST R IEC 61676-2006: Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
GOST R IEC 61951-2-2007: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Part 2. Nickel-metal hydride
GOST R IEC 61959-2007: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries
GOST R IEC 61960-2007: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
GOST R IEC 61982-1-2011: Secondary batteries for the propulsion of electric road vehicles. Part 1. Test parameters
GOST R IEC 61996-1-2009: Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Part 1. Voyage data recorder (VDR). Technical and performance requirements, methods of testing and required test results
GOST R IEC 62018-2011: Power consumption of information technology equipment. Measurement methods
GOST R IEC 62040-1-1-2009: Uninterruptible power systems (UPS). Part 1-1. General and safety requirements for UPS used in operator access areas
GOST R IEC 62040-1-2-2009: Uninterruptible power systems (UPS). Part 1-2. General and safety requirements for UPS used in restricted access locations
GOST R IEC 62127-1-2009: State system for ensuring the uniformity of measurements. Parameters of ultrasonic fields. General requirements to measuring methods and characterization of fields in the frequency range 0,5 to 40 MHz
GOST R IEC 62127-2-2009: State system for ensuring the uniformity of measurements. Hydrophones. General requirements for calibration methods in the frequency range up 40 MHz
GOST R IEC 62209-1-2008: Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation and procedures. Part 1. Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)
GOST R IEC 62259-2007: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial recombination
GOST R IEC 62281-2007: Safety of primary and secondary lithium cells and batteries during transport
GOST R IEC 62301-2011: Household electrical appliances. Measurement of standby power
GOST R IEC 62305-1-2010: Risk management. Protection against lightning. Part 1. General principles
GOST R IEC 62305-2-2010: Risk management. Protection against lightning. Part 2. Risk assessment
GOST R IEC 62340-2011: Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure
GOST R IEC 62384-2011: Electronic control gear supplied from the sources of direct or alternative current for light emitted diode modules. Performance requirements
GOST R IEC 62385-2012: Nuclear power plants. Instrumentation and control important to safety. Methods for assessing the performance of safety system instrument channels
GOST R IEC 62485-2-2011: Secondary batteries and battery installations. Safety requirements. Part 2. Stationary batteries
GOST R IEC 62560-2011: Self-ballasted LED-lamps for general lighting services by voltage 50 V. Safety specifications
GOST R IEC/TO 60825-9-2009: Safety of laser products. Part 9. Compilation of maximum permissible exposure to incoherent optical radiation
GOST R IEC/TO 61948-2-2008: Nuclear medicine instrumentation. Routine tests. Part 2. Scintillation cameras and single photon emission computed tomography imaging
GOST R IEC/TS 60034-17-2009: Rotating electrical machines. Part 17. Application guide for cage induction motors when fed from converters
GOST R ISO 10001-2009: Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations
GOST R ISO 10002-2007: Organization management. Customer satisfaction. Guidelines for complaints handling in organizations
GOST R ISO 10003-2009: Quality management. Customer satisfaction - Guidelines for dispute resolution external to organizations
GOST R ISO 10005-2007: Enterprise management. Guidelines for quality plans
GOST R ISO 10006-2005: Quality management systems. Guidelines for quality management in projects
GOST R ISO 10007-2007: Organization management. Guidelines for configuration management
GOST R ISO 10012-2008: Enterprise management. Measurement management systems. Requirements for measurement processes and measuring equipment
GOST R ISO 10014-2008: Enterprise management. Guidelines for realizing economic benefits in quality management system
GOST R ISO 10015-2007: Enterprise management. Guidelines for training
GOST R ISO 10019-2007: Organization management. Guidelines for the selection of quality management system consultants and use of their services
GOST R ISO 10042-2009: Welding. Arc-welding joints in aluminium and its alloys. Quality levels for imperfections
GOST R ISO 10075-2-2009: Ergonomic principles of assuring of adequacy of mental workload. Part 2. Design principles
GOST R ISO 10075-3-2009: Ergonomic principles of assuring of adequacy of mental workload. Part 3. Principles and requirements concerning methods for measuring and assessing mental workload
GOST R ISO 10140-3-2012: Acoustics. Laboratory measurement of sound insulation of building elements. Part 3. Measurement of impact sound insulation
GOST R ISO 10140-5-2012: Acoustics. Laboratory measurement of sound insulation of building elements. Part 5. Requirements for test facilities and equipment
GOST R ISO 10153-2011: Steel. Determination of boron content. Curcumin spectrophotometric method
GOST R ISO 10155-2006: Stationary source emissions. Automated monitoring of mass concentrations of solid particles. Performance characteristics, test methods and technical requirements
GOST R ISO 10280-2010: Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method
GOST R ISO 10303-107-2011: Industrial automation systems and integration. Product data representation and exchange. Part 107. Integrated application resource. Finite element analysis definition relationships
GOST R ISO 10303-239-2008: Industrial automation systems and integration. Product data representation and exchange. Part 239. Application protocols. Product life cycle support
GOST R ISO 10303-501-2006: Industrial automation systems and integration. Product data representation and exchange. Part 501. Application interpreted constructions. Edge-based wireframe
GOST R ISO 10303-502-2006: Industrial automation systems and integration. Product data representation and exchange. Part 502. Application interpreted constructions. Shell-based wireframe
GOST R ISO 10303-505-2006: Industrial automation systems and integration. Product data representation and exchange. Part 505. Application interpreted constructions. Drawing structure and administration
GOST R ISO 10303-506-2006: Industrial automation systems and integration. Product data representation and exchange. Part 506. Application interpreted constructions. Draughting elements
GOST R ISO 10303-507-2009: Industrial automation systems and integration. Product data representation and exchange. Part 507. Application interpreted construct. Geometrically bounded surface
GOST R ISO 10303-508-2009: Industrial automation systems and integration. Product data representation and exchange. Part 508. Application interpreted construct. Non-manifold surface
GOST R ISO 10303-509-2009: Industrial automation systems and integration. Product data representation and exchange. Part 509. Application interpreted construct. Manifold surface
GOST R ISO 10303-510-2006: Industrial automation systems and integration. Product data representation and exchange. Part 510. Application interpreted constructions. Geometrically bounded wireframe
GOST R ISO 10303-511-2006: Industrial automation systems and integration. Product data representation and exchange. Part 511. Application interpreted constructions. Topologically bounded surface
GOST R ISO 10303-512-2008: Industrial automation systems and integration. Product data representation and exchange. Part 512. Application interpreted constructions. Faceted boundary representation
GOST R ISO 10303-513-2009: Industrial automation systems and integration. Product data representation and exchange. Part 513. Application interpreted construct. Elementary boundary representation
GOST R ISO 10303-514-2007: Industrial automation systems and integration. Product data representation and exchange. Part 514. Application interpreted constructions. Advanced boundary representation
GOST R ISO 10303-515-2007: Industrial automation systems and integration. Product data representation and exchange. Part 515. Application interpreted constructions. Constructive solid geometry
GOST R ISO 10303-517-2009: Industrial automation systems and integration. Product data representation and exchange. Part 517. Application interpreted construct. Mechanical design geometric presentation
GOST R ISO 10303-519-2007: Industrial automation systems and integration. Product data representation and exchange. Part 519. Application interpreted constructions. Geometric tolerances
GOST R ISO 10303-520-2007: Industrial automation systems and integration. Product data representation and exchange. Part 520. Application interpreted constructions. Associative draughting elements
GOST R ISO 10303-521-2008: Industrial automation systems and integration. Product data representation and exchange. Part 521. Application interpreted constructions. Manifold subsurface
GOST R ISO 10303-523-2008: Industrial automation systems and integration. Product data representation and exchange. Part 523. Application interpreted constructions. Curve swept solid
GOST R ISO 10307-1-2009: Petroleum products. Determination of total sediment in residual fuel oils. Part 1. Hot filtration method
GOST R ISO 10396-2006: Stationary source emissions. Sampling for the automated determination of gas concentrations
GOST R ISO 10473-2007: Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
GOST R ISO 10484-2010: Widening test on nuts
GOST R ISO 10485-2010: Cone proof load test on nuts
GOST R ISO 10513-2009: Prevailing torque type all-metal hexagon nuts, style 2, with fine pitch thread. Property classes 8, 10 and 12
GOST R ISO 10535-2010: Hoists for the transfer of disabled persons. Requirements and test methods
GOST R ISO 10576-1-2006: Statistical methods. Guidelines for the evaluation of conformity with specified requirements. Part 1. General principles
GOST R ISO 10664-2007: Star-type internal socket button for bolts and screws
GOST R ISO 10791-1-2009: Machining centres. Part 1. Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
GOST R ISO 10813-1-2011: Vibration. Guidance for selection of vibration generating machines. Part 1. Equipment for dynamic environmental testing
GOST R ISO 10846-1-2010: Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 1. General principles of measurements
GOST R ISO 10846-2-2010: Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 2. Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
GOST R ISO 10846-5-2010: Mechanical vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 5. Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
GOST R ISO 10849-2006: Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
GOST R ISO 11064-7-2010: Ergonomic design of control centres. Part 7. Principles for evaluation
GOST R ISO 11095-2007: Statistical methods. Linear calibration using reference materials
GOST R ISO 11146-1-2008: Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. Part 1. Stigmatic and simple astigmatic beams
GOST R ISO 11146-2-2008: Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. Part 2. General astigmatic beams
GOST R ISO 11161-2010: Safety of machinery. Integrated manufacturing systems. Basic requirements
GOST R ISO 11170-2010: Hydraulic fluid power. Filter elements. Sequence of tests for verifying performance characteristics
GOST R ISO 11192-2011: Small craft. Graphical symbols
GOST R ISO 11193-2-2009: Single-use examination gloves. Part 2. Specification for gloves made from poly (vinyl chloride)
GOST R ISO 11222-2006: Air quality. Determination of the uncertainty of the time average of air quality measurements
GOST R ISO 11226-2008: Occupational safety standards system. Ergonomics. Manual cargo carriage. Static working postures. General requirements
GOST R ISO 11228-1-2009: System of standards for labour safety. Ergonomics. Manual handling. Part 1. Lifting and carrying. General requirements
GOST R ISO 11338-1-2008: Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Part 1. Sampling
GOST R ISO 11338-2-2008: Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Part 2. Sample preparation, clean-up and determination
GOST R ISO 11399-2007: Ergonomics of the thermal environment. Principles and application of relevant international standards
GOST R ISO 1140-2007: 3-, 4- and 8-strand polyamide fibre ropes. General specifications
GOST R ISO 1141-2007: 3-, 4- and 8-strand polyester fibre ropes. General specifications
GOST R ISO 11439-2010: Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications
GOST R ISO 11462-1-2007: Statistical methods. Guidelines for implementation of statistical process control. Part 1. Elements
GOST R ISO 11464-2011: Soil quality. Pre-treatment of samples for physico-chemical analysis
GOST R ISO 11476-2010: Paper and board. Method for determination of CIE whiteness. C/20 illuminant (indoor illumination)
GOST R ISO 11554-2008: Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
GOST R ISO 11591-2011: Engine-driven small craft. Field of vision from helm position
GOST R ISO 11611-2011: Occupational safety standards system. Special clothing for protection against sparks and spatters of molten metal in welding and allied processes. Technical requirements
GOST R ISO 11612-2007: Occupational safety standards system. Clothing for protection against heat and flame. Test methods and performance requirements for heat-protective clothing
GOST R ISO 11614-2011: Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
GOST R ISO 11648-1-2009: Statistical methods. Sampling from bulk materials. Part 1. General principles
GOST R ISO 11648-2-2009: Statistical methods. Sampling from bulk materials. Part 2. Sampling of particulate materials
GOST R ISO 11670-2010: Lasers and laser-related equipment. Test methods for laser beam parameters. Beams positional stability
GOST R ISO 1181-2007: 3-, 4- and 8-strand Manila and sisal fibre ropes. General specifications
GOST R ISO 11843-1-2007: Statistical methods. Capability of detection. Part 1. Terms and definitions
GOST R ISO 11843-2-2007: Statistical methods. Capability of detection. Part 2. Methodology in the linear calibration case
GOST R ISO 12039-2011: Stationary source emissions. Determination of carbon monoxide, carbon dioxide and oxygen. Performance characteristics and calibration of automated measuring systems
GOST R ISO 12052-2009: Health informatics. Digital imaging and communication in medicine (DICOM) including workflow and data management
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
GOST R ISO 12100-2-2007: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles
GOST R ISO 12117-2009: Earth-moving machinery. Tip-over protective structure (TOPS) for compact excavators. Laboratory tests and technical requirements
GOST R ISO 12124-2009: Acoustics. Procedures for the measurement of real-ear acoustical characteristics of hearing aids
GOST R ISO 12126-2009: Prevailing torque type all-metal hexagon nuts with flange. Accuracy classes A and B
GOST R ISO 12127-1-2011: Occupational safety standards system. Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials. Part 1. Test method using heat produced by heating cylinder
GOST R ISO 12127-2007: Occupational safety standards system. Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials
GOST R ISO 12127-2-2011: Occupational safety standards system. Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials. Part 2. Test method using contact heat produced by dropping small cylinders
GOST R ISO 12164-3-2011: Hollow taper shank of tools (HSK). Types T. Basic dimensions
GOST R ISO 12176-1-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion
GOST R ISO 12176-2-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 2. Electrofusion
GOST R ISO 12491-2011: Building materials and components. Statistical methods for quality control
GOST R ISO 12500-1-2009: Filters for compressed air. Test methods. Part 1. Oil aerosols
GOST R ISO 12509-2010: Earth-moving machinery. Lighting, signalling and marking lights, and reflex-reflector devices
GOST R ISO 12716-2009: Non-destructive testing. Acoustic emission inspection. Vocabulary
GOST R ISO 12884-2007: Ambient air. Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
GOST R ISO 12952-1-2010: Textiles. Burning behaviour of bedding items. Part 1. General test methods for the ignitability by a smouldering cigarette
GOST R ISO 13091-1-2008: Vibration. Vibrotactile perception thresholds for the assessment of nerve disfunction. Part 1. Methods of measurements at the fingertips
GOST R ISO 13091-2-2008: Vibration. Vibrotactile perception thresholds for the assessment of nerve dysfunction. Part 2. Analysis and interpretation of measurements at the fingertips
GOST R ISO 13373-1-2009: Condition monitoring and diagnostics of machines. Vibration condition monitoring. Part 2. General procedures
GOST R ISO 13374-1-2011: Condition monitoring and diagnostics of machines. Data processing, communication and presentation. Part 1. General guidelines
GOST R ISO 13374-2-2011: Condition monitoring and diagnostics of machines. Data processing, communication and presentation. Part 2. Data processing
GOST R ISO 13381-1-2011: Condition monitoring and diagnostics of machines. Machine condition prognosis. Part 1. General guidelines
GOST R ISO 13406-1-2007: Ergonomic requirements for office work with visual displays terminals based on flat panels. Part 1. Introduction
GOST R ISO 1346-2007: 3-, 4- and 8-strand polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament fibre ropes General specifications
GOST R ISO 13584-20-2006: Industrial automation systems and integration. Parts library. Part 20. Logical resource. Logical model of expressions
GOST R ISO 13600-2011: Technical energy systems. Basic concepts
GOST R ISO 13601-2011: Technical energy systems. Structure for analysis. Energyware supply and demand sectors
GOST R ISO 13680-2011: Seamless casing, tubing and coupling stock from corrosion-resistant high-alloy steels and alloys for petroleum and natural gas industries. Specifications
GOST R ISO 13695-2010: Optics and photonics. Lasers and laser related equipment. Test methods for the spectral characteristics of lasers
GOST R ISO 13706-2006: Air cooled apparatus. General technical requirements
GOST R ISO 13720-2011: Meat and meat products. Enumeration of presumptive Pseudomonas spp.
GOST R ISO 13736-2010: Combustible liquids. Determination of Abel closed-cup flash point
GOST R ISO 13759-2010: Petroleum products. Determination of alkyl nitrate in diesel fuels by spectrometric method
GOST R ISO 13879-2009: Perspective industrial technologies. Content and drafting of a functional specification for petroleum and natural gas industries
GOST R ISO 13880-2010: Perspective industrial technologies. Content and drafting of a technical specification for petroleum and natural gas industries
GOST R ISO 13898-2-2006: Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of nickel content
GOST R ISO 13898-3-2007: Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 3. Determination of copper content
GOST R ISO 13898-4-2007: Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 4. Determination of cobalt content
GOST R ISO 13899-2-2009: Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of Nb content
GOST R ISO 13909-1-2010: Hard coal and coke. Mechanical sampling. Part 1. General introduction
GOST R ISO 14001-2007: Environmental management systems. Requirements with guidance for use
GOST R ISO 14004-2007: Environmental management systems. General guidelines on principles, systems and support techniques
GOST R ISO 14015-2007: Environmental management. Environmental assessment of sites and organizations regulations
GOST R ISO 14020-2011: Environmental labels and declarations. General principles
GOST R ISO 14040-2010: Environmental management. Life cycle assessment. Principles and framework
GOST R ISO 14044-2007: Environmental management. Life cycle assessment. Requirements and guidelines
GOST R ISO 14050-2009: Environmental management. Vocabulary
GOST R ISO 14063-2007: Environmental management. Environmental communication. Guidelines and examples
GOST R ISO 14064-1-2007: Greenhouse gases. Part 1. Specification with guidance at the organizational level for quantification and reporting of greenhouse gas emissions and removals
GOST R ISO 14064-2-2007: Greenhouse gases. Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
GOST R ISO 14064-3-2007: Greenhouse gases. Part 3. Specification with guidance for the validation and verification of greenhouse gas assertions
GOST R ISO 14065-2010: Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
GOST R ISO 14116-2013: Occupational safety standards system. Protective clothing. Protection against heat and flame. Limited flame spread materials, material assemblies and clothing
GOST R ISO 14122-1-2009: Safety of machinery - permanent means of access to machinery. Part 1. Choice of fixed means of access between two levels
GOST R ISO 14122-2-2010: Safety of machinery. Permanent means of access to machinery. Part 2. Working platforms and walkways.
GOST R ISO 14122-3-2009: Safety of machinery. Permanent means of access to machinery. Part 3. Stairs, stepladders and guard-rails.
GOST R ISO 14122-4-2009: Safety of machinery. Permanent means of access to machinery. Part 4. Vertical stairs
GOST R ISO 14174-2010: Welding consumables. Fluxes for submerged arc welding. Classification
GOST R ISO 14175-2010: Welding consumables. Gases and gas mixtures for fusion welding and allied processes
GOST R ISO 14258-2008: Industrial automation systems. Concepts and rules for enterprise models
GOST R ISO 14505-3-2010: Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles. Part 3. Evaluation of thermal comfort using human subjects
GOST R ISO 14507-2011: Soil quality. Pre-treatment of samples for determination of organic contaminants
GOST R ISO 14579-2009: Bolts with cylindrical head and star-type internal socket button
GOST R ISO 14583-2009: Star type socket pan cylindrical head screws
GOST R ISO 14624-1-2010: Space systems. Safety and compatibility of materials. Part 1. Determination of upward flammability of material
GOST R ISO 14624-4-2010: Space systems. Safety and compatibility of materials. Part 4. Determination of upward flammability of material in pressurized gaseous or oxygen-enriched environments
GOST R ISO 14644-3-2007: Cleanrooms and associated controlled environments. Part 3. Test methods
GOST R ISO 14644-6-2010: Cleanrooms and associated controlled environments. Part 6. Vocabulary
GOST R ISO 14644-7-2007: Cleanrooms and associated controlled environments. Part 7. Separative devices (clean air hoods, glove boxes, isolators and mini-environments)
GOST R ISO 14644-8-2008: Cleanrooms and associated controlled environments. Part 8. Classification of airborne molecular contamination
GOST R ISO 14738-2007: Safety of machinery. Anthropometric requirements for the design of workstations at machinery
GOST R ISO 14837-1-2007: Vibration. Ground-borne noise and vibration arising from rail systems. Part 1. General guidance
GOST R ISO 14839-1-2011: Vibration. Vibration of rotating machinery equipped with active magnetic bearings. Part 1. Terms and definitions
GOST R ISO 14839-2-2011: Vibration. Vibration of rotating machinery equipped with active magnetic bearings. Part 2. Evaluation of vibration
GOST R ISO 14915-1-2010: Ergonomics of multimedia user interfaces. Part 1. Design principles and framework
GOST R ISO 14956-2007: Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
GOST R ISO 14965-2008: Air quality. Determination of total non-methane organic compounds. Cryogenic pre-concentration and direct flame ionization detection method
GOST R ISO 14971-2006: Medical devices. Application of risk management to medical devices
GOST R ISO 15025-2007: Occupational safety standards system. Protective clothing for protection against heat and flame. Method of test for limited flame spread
GOST R ISO 15119-2011: Packaging. Sacks. Determination of the friction of filled sacks
GOST R ISO 15202-1-2007: Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
GOST R ISO 15202-2-2008: Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation
GOST R ISO 15202-3-2008: Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 3. Analysis
GOST R ISO 15265-2006: Risk management. Fundamentals of risk assessment strategy for the prevention of stress and discomfort in thermal working conditions
GOST R ISO 15330-2010: Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
GOST R ISO 15489-1-2007: System of standards on information, librarianship and publishing. Records management. General requirements
GOST R ISO 15516-2011: Ships and marine technology. Launching appliances for davit-launched lifeboats
GOST R ISO 15531-1-2008: Industrial automation systems and integration. Industrial manufacturing management data. Part 1. General overview
GOST R ISO 15531-31-2010: Industrial automation systems and integration. Industrial manufacturing management data. Part 31. Resource information model
GOST R ISO 15536-1-2010: Ergonomics. Computer manikins and body templates. Part 1. General requirements
GOST R ISO 15536-2-2010: Ergonomics. Computer manikins and body templates. Part 2. Verification of functions and Validation of dimensions for Computer manikin systems
GOST R ISO 15547-1-2009: Petroleum and natural gas industries. Plate-type heat exchangers. Technical requirements
GOST R ISO 15549-2009: Non-destructive testing. Eddy current testing. Basic principles
GOST R ISO 15585-2009: Hard coal. Determination of caking index
GOST R ISO 15607-2009: Specification and qualification of welding procedures for metallic materials. General rules
GOST R ISO 15609-1-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 1. Arc welding
GOST R ISO 15609-2-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 1. Gas welding
GOST R ISO 15610-2009: Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables
GOST R ISO 15611-2009: Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience
GOST R ISO 15612-2009: Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure
GOST R ISO 15613-2009: Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test
GOST R ISO 15614-1-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1. Arc and gas welding of steels and arc welding of nickel and nickel alloys
GOST R ISO 15614-12-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 12. Spot, seam and projection welding
GOST R ISO 15614-13-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 13. Resistance butt and flash welding
GOST R ISO 15614-2-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 2. Arc welding of aluminium and aluminium alloys
GOST R ISO 15614-5-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 5. Arc welding of titanium, zirconium and their alloys
GOST R ISO 15665-2007: Noise. Guidelines for acoustic insulation of pipes and valves
GOST R ISO 15704-2008: Industrial automation systems - Requirements for enterprise-reference architectures and methodologies
GOST R ISO 15713-2009: Stationary source emissions. Sampling and determination of gaseous fluoride content
GOST R ISO 15767-2007: Workplace atmospheres. Accuracy in weighing collected aerosols
GOST R ISO 15792-1-2009: Welding consumables. Test methods. Part 1. Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
GOST R ISO 15792-2-2010: Welding consumables. Test methods. Part 2. Preparation of single-run and two-run technique test specimens in steel
GOST R ISO 15792-3-2010: Welding consumables. Test methods. Part 3. Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
GOST R ISO 15859-10-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 10. Water
GOST R ISO 15859-11-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 11. Ammonia
GOST R ISO 15859-1-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 1. Oxygen
GOST R ISO 15859-12-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 12. Carbon dioxide
GOST R ISO 15859-13-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 13. Breathing air
GOST R ISO 15859-2-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 2. Hydrogen
GOST R ISO 15859-3-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 3. Nitrogen
GOST R ISO 15859-5-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 5. Nitrogen tetroxide propellants
GOST R ISO 15859-8-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 8. Kerosene propellant
GOST R ISO 15859-9-2010: Space systems. Fluid characteristics, sampling and methods of analysis. Part 9. Argon
GOST R ISO 15860-2011: Space system. Gas contamination. Measurements methods for field tests
GOST R ISO 15974-2005: Closed end blind rivets with break pull mandrel and countersunk head (aluminium alloy body and steel mandrel)
GOST R ISO 16000-10-2009: Indoor air. Part 10. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
GOST R ISO 16000-11-2009: Indoor air. Part 11. Determination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage of samples and preparation of test specimens
GOST R ISO 16000-1-2007: Indoor air. Part 1. Sampling. General
GOST R ISO 16000-2-2007: Indoor air. Part 2. Sampling for formaldehyde content. Main principles
GOST R ISO 16000-3-2007: Indoor air. Part 3. Determination of formaldehyde and other carbonyl compounds. Active sampling method
GOST R ISO 16000-4-2007: Indoor air. Part 4. Determination of formaldehyde. Diffusive sampling method
GOST R ISO 16000-5-2009: Indoor air. Part 5. Sampling strategy for volatile organic compounds (VOCs)
GOST R ISO 16000-6-2007: Indoor air. Part 6. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID
GOST R ISO 16000-7-2011: Indoor air. Part 7. Sampling strategy for determination of airborne asbestos fibre concentrations
GOST R ISO 16000-8-2011: Indoor air. Part 8. Determination of local mean ages of air in buildings for characterizing ventilation conditions
GOST R ISO 16000-9-2009: Indoor air. Part 9. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method
GOST R ISO 16017-1-2007: Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Part 1. Pumped sampling
GOST R ISO 16017-2-2007: Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Part 2. Diffusive sampling
GOST R ISO 16047-2009: Fasteners. Torque/clamp force testing
GOST R ISO 16063-11-2009: Mechanical vibration. Methods for the calibration of vibration and shock transducers. Part 11. Primary vibration calibration by laser interferometry
GOST R ISO 16063-1-2009: Mechanical vibration. Methods for the calibration of vibration and shock transducers. Part 1. Basic concepts
GOST R ISO 16063-12-2009: Vibration. Methods for the calibration of vibration and shock transducers. Part 12. Primary vibration calibration by the reciprocity method
GOST R ISO 16063-21-2009: Vibration. Methods for the calibration of vibration and shock transducers. Part 21. Vibration calibration by comparison to a reference transducer
GOST R ISO 16107-2009: Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers
GOST R ISO 16121-1-2011: Ergonomic of vehicles. Requirements to the workplace of bus driver. Part 1. Basic requirements
GOST R ISO 16121-4-2011: Ergonomic of vehicles. Requirements for the workplace of bus driver. Part 4. Cabin work environment
GOST R ISO 16156-2008: Machine-tools safety. Jaw chucks
GOST R ISO 16200-1-2007: Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 1. Pumped sampling method
GOST R ISO 16200-2-2007: Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 2. Diffusive sampling method
GOST R ISO 16362-2009: Ambient air. Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
GOST R ISO 16426-2009: Fasteners. Quality assurance system
GOST R ISO 16602-2010: Occupational safety standards system. Protective clothing for protection against chemicals. Classification, labelling and performance requirements
GOST R ISO 16702-2008: Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography
GOST R ISO 16818-2011: Building environment design. Energy efficiency. Terminology
GOST R ISO 16889-2011: Hydraulic fluid power. Filters. Multi-pass method of transmission of fluid through the filter element for evaluating filtration performance
GOST R ISO 16932-2011: Glass and glass products. Destructive-windstorm-resistant security glazing. Test method and classification
GOST R ISO 17123-4-2011: State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 4. Elektro-optical distance meters (EDM instruments)
GOST R ISO 17359-2009: Condition monitoring and diagnostics of machines. General guidelines on condition monitoring and diagnostics procedures
GOST R ISO 17363-2010: Supply chain applications of RFID. Freight containers
GOST R ISO 17497-1-2011: Acoustics. Sound-scattering properties of surfaces. Part 1. Measurement of the random-incidence scattering coefficient in a reverberation room
GOST R ISO 17641-1-2011: Destructive tests on welds in metallic materials. Hot cracking tests for weld. Arc welding processes. Part 1. General
GOST R ISO 17642-1-2011: Destructive tests on welds in metallic materials. Cold cracking tests for welds. Arc welding processes. Part 1. General
GOST R ISO 17666-2006: Risk management. Space systems
GOST R ISO 17734-1-2009: Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry. Part 1. Isocyanates using dibutylamine derivatives
GOST R ISO 17734-2-2009: Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry. Part 2. Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives
GOST R ISO 1817-2009: Rubber. Determination of resistance to liquids effect
GOST R ISO 18283-2010: Hard coal and coke. Manual sampling
GOST R ISO 18414-2008: Statistical methods. Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit reserve factor for product quality
GOST R ISO 18436-3-2011: Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Part 3. Requirements for training bodies and the training process
GOST R ISO 19439-2008: Enterprise integration. Framework for enterprise modelling
GOST R ISO 1969-2007: 3- and 4-strand polyethylene fibre ropes. General specifications
GOST R ISO 2009-2013: Slotted raised countersunk head screws. Product grade A
GOST R ISO 2017-1-2011: Vibration and shock. Resilient mounting systems. Part 1. Technical information for the application of isolation systems
GOST R ISO 2017-2-2011: Mechanical vibration and shock. Resilient mounting systems. Part 2. Technical information for the application of vibration isolation associated with railway systems
GOST R ISO 20552-2011: Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
GOST R ISO 20806-2007: Vibration. Balancing of medium and large rotors in situ. Criteria and safeguards
GOST R ISO 21247-2007: Statistical methods. Combined accept-zero systems and process control procedures for sampling product
GOST R ISO 21438-1-2011: Workplace atmospheres. Determination of inorganic acids by ion chromatography. Part 1. Non-volatile acids (sulphuric acid and phosphoric acid)
GOST R ISO 21467-2011: Earth-moving machinery. Horizontal direction drills. Terminology and specifications
GOST R ISO 21482-2009: Ionizing-radiation warning. Supplementary symbol
GOST R ISO 21747-2010: Statistical methods. Process performance and capability statistics for measured quality characteristics
GOST R ISO 22030-2009: Soil quality. Biological methods. Chronic phytotoxicity for higher plants
GOST R ISO 22088-3-2010: Plastics. Determination of resistance to environmental stress cracking. Part 3. Bent strip method
GOST R ISO 22308-2006: Cork stoppers. Sensory analysis
GOST R ISO 226-2009: Acoustics-Normal equal-loudness-level contours
GOST R ISO 22673-2011: Ships and marine technologies. Launching appliances for free-fall lifeboats
GOST R ISO 22742-2006: Automatic identification. Bar coding. Linear bar code and two dimensional symbols for product packaging
GOST R ISO 22745-2-2011: Industrial automation systems and integration. Open technical dictionaries and their application to master data. Part 2. Vocabulary
GOST R ISO 22868-2007: Noise of machines. Noise test engineering method for portable hand-held forestry machines with petrol engine
GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters
GOST R ISO 23045-2013: Building environment design. Guidelines to assess energy efficiency of new buildings
GOST R ISO 2307-2007: Fibre ropes. Methods for determination of certain physical and mechanical properties
GOST R ISO 23081-1-2008: System of standards on information, librarianship and publishing. Records management processes. Metadata for records. Part 1. Principles
GOST R ISO 2320-2009: Prevailing torque type steel nuts - Mechanical and performance properties
GOST R ISO 23309-2010: Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing
GOST R ISO 2412-2006: Shipbuilding. Colours of indicator lights
GOST R ISO 24497-2-2009: Non-destructive testing. Metal magnetic memory. Part 2. General requirements
GOST R ISO 24510-2009: Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users
GOST R ISO 24511-2009: Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services
GOST R ISO 24512-2009: Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services
GOST R ISO 2477-2011: Insulating refractory products. Determination of permanent change in dimensions on heating
GOST R ISO 24803-2009: Recreational diving services. Requirements for recreational scuba diving service providers
GOST R ISO 2531-2008: Ductile iron pipes, fittings, accessories and their joints for water or gas applications. Specifications
GOST R ISO 2560-2009: Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
GOST R ISO 2566-1-2009: Steel. Conversion of elongation values. Part 1. Carbon and low alloy steel
GOST R ISO 2566-2-2009: Steel. Conversion of elongation values. Part 2. Austenitic steel
GOST R ISO 26382-2011: Cogeneration systems. General technical requirements
GOST R ISO 2859-10-2008: Statistical methods. Sampling procedures for inspection by attributes. Part 10. Introduction to the GOST R ISO 2859 series of standards
GOST R ISO 2859-3-2009: Statistical methods. Sampling procedures for inspection by attributes. Part 3. Skip-lot sampling procedures
GOST R ISO 2859-4-2006: Statistical methods. Sampling procedures for inspection by attributes. Part 4. Assessment of declared quality level
GOST R ISO 2859-5-2009: Statistical methods. Sampling procedures for inspection by attributes. Part 5. System of sequential sampling plans indexed by AQL for lot-by-lot inspection
GOST R ISO 2941-2011: Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating
GOST R ISO 2942-2010: Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point
GOST R ISO 2943-2011: Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
GOST R ISO 3183-2009: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
GOST R ISO 3183-2-2007: Steel pipes for pipelines. Specifications. Part 2. Requirements for class B pipes
GOST R ISO 3183-3-2007: Steel pipes for pipelines. Specifications. Part 3. Requirements for class C pipes
GOST R ISO 3269-2009: Fasteners. Acceptance inspection
GOST R ISO 3324-2-2009: Aircraft tyres and rims. Part 2. Test methods for tyres
GOST R ISO 3411-2011: Earth-moving machinery. Physical dimensions of operators and minimum operator space envelope
GOST R ISO 3449-2009: Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements
GOST R ISO 3452-1-2011: Non-destructive testing. Penetrant testing. Part 1. General principles
GOST R ISO 3452-2-2009: Non-destructive testing. Penetrant testing. Part 2. Testing of penetrant materials
GOST R ISO 3452-3-2009: Non-destructive testing. Penetrant testing. Part 3. Reference test blocks
GOST R ISO 3452-4-2011: Non-destructive testing. Penetrant testing. Part 4. Equipment
GOST R ISO 3471-2009: Earth-moving machinery. Roll-over protective structures. Technical requirements and laboratory tests
GOST R ISO 3506-1-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 1. Bolts, screws and studs
GOST R ISO 3506-2-2009: Mechanical properties of corrosion-resistant stainless steel fasteners Part 2. Nuts
GOST R ISO 3506-3-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 3. Set screws and similar fasteners not under tensile stress
GOST R ISO 3506-4-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 4. Tapping screws
GOST R ISO 3580-2009: Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
GOST R ISO 3581-2009: Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
GOST R ISO 3652-2005: Shipbuilding. Inland vessels. Rope reels
GOST R ISO 3675-2007: Crude petroleum and liquid petroleum products. Laboratory hydrometer method for determination of density
GOST R ISO 3679-2010: Methyl esters of fatty acids (FAME). Rapid equilibrium closed cup method of flash point determination
GOST R ISO 3723-2011: Hydraulic fluid power. Filter elements. Method for end load test
GOST R ISO 3734-2009: Petroleum products. Determination of water and sediment content in residual fuel oils by centrifuge method
GOST R ISO 3786-2005: Shipbuilding. Inland navigation. Towing hooks. Scale of tractive efforts
GOST R ISO 3834-1-2007: Quality requirements for fusion welding of metallic materials. Part 1. Criteria for the selection of the appropriate level of requirements
GOST R ISO 3834-2-2007: Quality requirements for fusion welding of metallic materials. Part 2. Comprehensive quality requirements
GOST R ISO 3834-3-2007: Quality requirements for fusion welding of metallic materials. Part 3. Standard quality requirements
GOST R ISO 3834-4-2007: Quality requirements for fusion welding of metallic materials. Part 4. Elementary quality requirements
GOST R ISO 3834-5-2010: Quality requirements for fusion welding of metallic materials. Part 5. Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
GOST R ISO 3839-2009: Petroleum products. Determination of bromine number of distillates and aliphatic olefins. Electrometric method
GOST R ISO 389-1-2011: State system for ensuring the uniformity of measurements. Acoustics. Reference zero for the calibration of audiometric equipment. Part 1. Reference equivalent threshold sound pressure levels of pure tones for supra-aural earphones
GOST R ISO 389-7-2011: State system for ensuring the uniformity of measurements. Acoustics. Reference zero for the calibration of audiometric equipment. Part 7. Reference threshold of hearing under free-field and diffuse-field listening conditions
GOST R ISO 3926-2005: Shipbuilding. Inland navigation. Couplings for oil and fuel reception. Mating dimensions
GOST R ISO 3951-5-2009: Statistical methods. Sampling procedures for inspection by variables. Part 5. Sequential sampling plans indexed by AQL for known standard deviation
GOST R ISO 3968-2011: Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow characteristics
GOST R ISO 4014-2013: Hexagon head bolts. Product grades A and B
GOST R ISO 4018-2013: Hexagon head screws. Product grade C
GOST R ISO 4040-2011: Ergonomics of vehicles. Location of hand controls, indicators and tell-tales in motor vehicle
GOST R ISO 4042-2009: Fasteners. Electroplated coatings
GOST R ISO 4051-2005: Shipbuilding. Inland vessels. Steering gear values of torques
GOST R ISO 4063-2010: Welding and allied processes. Nomenclature of processes and reference numbers
GOST R ISO 4089-2005: Shipbuilding. Inland navigation. Sealing rubber for covers of cargo hatches
GOST R ISO 4127-1-2005: Shipbuilding. Inland vessels. Fairleads. Part 1. Two-lip fairleads
GOST R ISO 4127-2-2005: Shipbuilding. Inland vessels. Fairleads. Part 2. Roller fairleads
GOST R ISO 4136-2009: Destructive tests on welds in metallic materials. Transverse tensile test
GOST R ISO 4143-2005: Shipbuilding. Inland vessels. Open rowing lifeboats
GOST R ISO 4175-2006: Shipbuilding. Shipborne barges, series 1. Main dimensions
GOST R ISO 4224-2007: Ambient air. Determination of carbon monoxide. Non-dispersive infrared spectrometry method
GOST R ISO 4548-1-2009: Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 1. Differential pressure/flow characteristics
GOST R ISO 4548-3-2009: Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 3. Resistance to high differential pressure and to elevated temperature
GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C
GOST R ISO 4759-3-2009: Tolerances for fasteners – Part 3: plain washers for bolts, screws and nuts – product grades A and C
GOST R ISO 4940-2010: Steel and iron. Determination of nickel content. Flame atomic absorption spectrometric method
GOST R ISO 4943-2010: Steel and iron. Determination of copper content. Flame atomic absorption spectrometric method
GOST R ISO 4967-2009: Steel. Determination of content of non-metallic inclusions. Micrographic method using standard diagrams
GOST R ISO 5006-2010: Earth-moving machinery. Operator's field of view. Test method and performance criteria
GOST R ISO 5010-2006: Earth-moving machinery. Rubber-tyred machines. Steering capability
GOST R ISO 5010-2009: Earth-moving machinery. Steering systems for rubber-tyred machines
GOST R ISO 5178-2010: Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints
GOST R ISO 528-2009: Refractory products. Determination of pyrometric cone equivalent (refractoriness)
GOST R ISO 5485-2005: Shipbuilding. Inland vessels. Fixed steel deck stairs
GOST R ISO 5577-2009: Non-destructive testing. Ultrasonic inspection. Vocabulary
GOST R ISO 5797-2010: Ships and marine technology. Windows and side scuttles for fire-resistant constructions
GOST R ISO 580-2008: Plastics piping systems. Injection-moulded thermoplastics fittings. Methods for determination of fittings appearance alteration after heating
GOST R ISO 5817-2009: Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
GOST R ISO 6015-2010: Earth-moving machinery. Hydraulic excavators and backhoe loaders. Methods of determining tool forces
GOST R ISO 6050-2005: Shipbuilding. Bulbous bow and side thrusters. Symbols
GOST R ISO 614-2007: Shipbuilding and marine structures. Toughened safety glass panes for rectangular windows and side scuttles. Punch method of non-destructive strength testing
GOST R ISO 6142-2008: Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
GOST R ISO 6157-1-2009: Fasteners. Surface discontinuities. Part 1. Bolts, screws and studs for general requirements
GOST R ISO 6157-2-2009: Fasteners - Surface discontinuities - Part 2: Nuts
GOST R ISO 6165-2010: Earth-moving machinery. Classification. Terms and definitions
GOST R ISO 6216-2005: Shipbuilding. Inland navigation. Pilot craft. Classification and basic requirements
GOST R ISO 6217-2005: Shipbuilding. Inland navigation. Pilot craft. Identification painting and inscriptions
GOST R ISO 6310-2005: Road vehicles. Brake linings. Compressive strain test method
GOST R ISO 6312-2007: Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies
GOST R ISO 6385-2007: Ergonomics. Ergonomic principles in the design of work systems
GOST R ISO 6486-2-2007: Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food. Release of lead and cadmium. Part 2. Permissible limits
GOST R ISO 6507-1-2007: Metals and alloys. Vickers hardness test. Part 1. Test method
GOST R ISO 6520-2-2009: Welding and allied process. Classification of geometric imperfections in metallic materials. Part 2. Welding with pressure
GOST R ISO 6683-2010: Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests
GOST R ISO 6765-2005: Shipbuilding. Shipborne barges, series 3. Main dimensions
GOST R ISO 6772-2011: Aerospace. Fluid systems. Impulse testing of hydraulic hose, tubing and fitting assemblies
GOST R ISO 6940-2009: Textile fabrics. Burning behaviour. Determination of ease of ignition of vertically oriented specimens
GOST R ISO 6942-2007: Occupational safety standards system. Clothing for protection against heat and fire. Assessment methods of materials and material assemblies when exposed to а source of radiant heat
GOST R ISO 6954-2009: Vibration. Guidelines for the measurement and evaluation of vibration with regard to habitability on passenger and merchant ships
GOST R ISO 704-2010: Terminology work. Principles and methods
GOST R ISO 7042-2011: Prevailing torque type all-metal hexagon nuts, style 2. Property classes 5, 8, 10 and 12
GOST R ISO 7044-2009: Prevailing torque type all-metal hexagon nuts with flange. Accuracy classes A and B
GOST R ISO 7168-1-2005: Air quality. Exchange of data. Part 1. General data format
GOST R ISO 7222-2005: Shipbuilding. Shipborne barges, series 2. Main dimensions
GOST R ISO 7243-2007: Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
GOST R ISO 7255-2007: Shipbuilding. Active control units of ships. Vocabulary
GOST R ISO 7364-2009: Shipbuilding and marine structures. Deck machinery. Accommodation ladder winches
GOST R ISO 7606-2005: Shipbuilding. Inland navigation vessels. Draught scales
GOST R ISO 7617-3-2011: Plastics-coated fabrics for upholstery. Part 3. Specification for polyurethane-coated woven fabrics
GOST R ISO 7619-1-2009: Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method of measurement (Shore hardness)
GOST R ISO 7619-2-2009: Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 2. IRHD pocket meter method of measurement
GOST R ISO 7661-2010: Clamp blocks for tube lines having axial alignment. Technical requirements and test methods
GOST R ISO 7708-2006: Air quality. Particle size fraction definitions for health-related sampling
GOST R ISO 7721-2011: Countersunk head screws. Head configuration and gauging
GOST R ISO 7721-2-2011: Countersunk flat head screws. Part 2. Penetration depth of cross recesses
GOST R ISO 7730-2009: Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
GOST R ISO 7731-2007: Ergonomics. Danger signals for public and work areas. Auditory danger signals
GOST R ISO 7825-2005: Shipbuilding. Deck machinery. General requirements
GOST R ISO 7870-1-2011: Statistical methods. Control charts. Part 1. General guidelines
GOST R ISO 7935-2007: Stationary source emissions. Determination of the mass concentration of sulphur dioxide. Performance characteristics of automated measuring methods
GOST R ISO 8000-102-2011: Data quality. Part 102. Master data. Exchange of characteristic data. Vocabulary
GOST R ISO 8000-110-2011: Data quality. Part 110. Master data. Exchange of characteristic data. Syntax, semantic encoding, and conformance to data specification
GOST R ISO 8082-2005: Self-propelled machinery for forestry. Roll-over protective structures. Performance requirements and test methods
GOST R ISO 8099-2012: Small crafts. Toilet waste retention system
GOST R ISO 8106-2010: Glass containers. Determination of capacity by gravimetric method
GOST R ISO 8178-5-2009: Reciprocating internal combustion engines. Exhaust emission measurement - Part 5. Test fuels
GOST R ISO 8206-2009: Acceptance test for oxygen cutting machines. Reproducible accuracy. Operational characteristics
GOST R ISO 8303-2005: Shipbuilding. Shipborne barges, series 3. Main operational and technical requirements
GOST R ISO 8385-2011: Ships and marine technology. Dredgers. Classification
GOST R ISO 8399-1-2010: Aerospace. Accessory connection to the product. Accessory drives and mounting flanges (Metric series). Part 1. Design criteria
GOST R ISO 8399-2-2010: Aerospace. Accessory connection to the product. Accessory drives and mounting flanges (Metric series). Part 2. Dimensions
GOST R ISO 8528-2-2007: Reciprocating internal combustion engine driven alternating current generating sets. Part 2. Internal combustion engines
GOST R ISO 8528-7-2007: Reciprocating internal combustion engine driven alternating current generating sets. Part 7. Technical declarations for specification and design
GOST R ISO 8568-2010: Shock testing machines. Declaration and verification of characteristics
GOST R ISO 857-1-2009: Welding and allied processes. Vocabulary. Part 1. Metal welding processes. Terms and definitions
GOST R ISO 857-2-2009: Welding and allied processes. Vocabulary. Part 2. Soldering and brazing processes. Terms and definitions
GOST R ISO 8573-8-2007: Compressed air. Part 8. Test methods for solid particle content by mass concentration
GOST R ISO 898-5-2009: Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses
GOST R ISO 898-7-2009: Mechanical properties of fasteners. Part 7. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
GOST R ISO 8991-2011: Fasteners. Designation system
GOST R ISO 8992-2011: Fasteners. General requirements for bolts, screws, studs and nuts
GOST R ISO 8996-2008: Ergonomics of the thermal environment. Determination of metabolic rate
GOST R ISO 9000-2008: Quality management systems. Fundamentals and vocabulary
GOST R ISO 9001-2008: Quality management systems. Requirements
GOST R ISO 9004-2010: Managing for the sustained success of an organization. A quality management approach
GOST R ISO 9016-2011: Destructive tests on welds in metallic materials. Test for impact bending. Test specimen location, notch orientation and examination
GOST R ISO 9042-2011: Steels. Manual point counting method for statistically estimating the volume fraction of a constituent with point grid
GOST R ISO 9151-2007: Occupational safety standards system. Protective clothing against heat and flame. Method for determination of heat transmission on exposure to flame
GOST R ISO 9169-2006: Air quality. Determination of performance characteristics of measurement methods
GOST R ISO 9185-2007: Occupational safety standards system. Special protective clothing. Assessment methods of resistance to molten metal splash
GOST R ISO 9241-110-2009: Ergonomics of human-system interaction. Part 110. Dialogue principles
GOST R ISO 9241-11-2010: Ergonomic requirements for office work with visual display terminals (VDTs). Part 11. Guidance on usability
GOST R ISO 9241-1-2007: Ergonomic requirements for office work with visual display terminals (VDTs). Part 1. General introduction
GOST R ISO 9241-210-2012: Ergonomics of human-system interaction. Part 210. Human-centred design for interactive systems
GOST R ISO 9241-2-2009: Ergonomic requirements for office work with visual display terminals (VDTs). Part 2. Guidance on task requirements
GOST R ISO 9241-4-2009: Ergonomic requirements for office work with visual display terminals (VDT). Part 4. Keyboard requirements
GOST R ISO 9241-5-2009: Ergonomic requirements for office work with visual display terminals (VDTs). Part 5. Workstation layout and postural requirements
GOST R ISO 9241-7-2007: Ergonomic requirements for office work with visual display terminals (VDTs). Part 7. Requirements for display with reflections
GOST R ISO 9241-8-2007: Ergonomic requirements for office work with visual display terminals (VDTs). Part 8. Requirements for displayed colours
GOST R ISO 9329-4-2010: Seamless tubes from austenitic high-alloy steels for pressure purposes. Specifications
GOST R ISO 9355-2-2009: Ergonomic requirements for the design of displays and control actuators. Part 2. Displays
GOST R ISO 9359-2007: Air quality. Stratified sampling method for assessment of ambient air quality
GOST R ISO 9686-2009: Direct reduced iron. Determination of carbon and/or sulphur content. Method of infrared spectroscopy after sample burning in induction furnace
GOST R ISO 9712-2009: Non-destructive testing. Qualification and certification of personnel
GOST R ISO 9727-1-2009: Cylindrical cork stoppers. Methods for determination of physical properties. Part 1. Determination of dimensions
GOST R ISO 9727-2-2012: Cylindrical cork stoppers. Methods for determination of physical properties. Part 2. Determination of mass and apparent density for agglomerated cork stoppers
GOST R ISO 9727-3-2010: Cylindrical cork stoppers. Methods for determination of physical properties. Part 3. Determination of humidity content
GOST R ISO 9727-4-2010: Cylindrical cork stoppers. Methods for determination of physical properties. Part 4. Determination of dimensional recovery after compression
GOST R ISO 9727-6-2012: Cylindrical cork stoppers. Methods for determination of physical properties. Part 6. Determination of liquid tightness
GOST R ISO 9727-7-2010: Cylindrical cork stoppers. Methods for determination of physical properties. Part 7. Determination of dust quantity
GOST R ISO 9886-2008: Ergonomics of the thermal environment. Evaluation of thermal strain by physiological measurements
GOST R ISO 9934-1-2011: Non-destructive testing. Magnetic particle testing. Part 1. General principles
GOST R ISO 9934-2-2011: Non-destructive testing. Magnetic particle testing. Part 2. Detection media
GOST R ISO TR 11146-3-2008: Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. Part 3. Intrinsic and geometrical laser beam classification, propagation and details of test methods
GOST R ISO TR 13569-2007: Financial services. Information security guidelines
GOST R ISO/IEC 10373-5-2006: Identification cards. Test methods. Part 5. Optical memory cards
GOST R ISO/IEC 10373-5-2010: Identification cards. Test methods. Part 5. Optical memory cards
GOST R ISO/IEC 10536-1-2006: Identification cards. Contactless integrated circuit(s) cards. Close-coupled cards. Part 1. Physical characteristics
GOST R ISO/IEC 11179-4-2012: Information technology. Metadata registries (MDR). Part 4. Formulation of data definitions
GOST R ISO/IEC 11694-2-2010: Identification cards. Optical memory cards. Linear recording method. Part 2. Dimensions and location of the accessible optical area
GOST R ISO/IEC 12207-2010: Information technology. System and software engineering. Software life cycle processes
GOST R ISO/IEC 13250-2-2012: Information technology. Topic Maps. Part 2. Data model
GOST R ISO/IEC 13335-1-2006: Information technology. Security techniques. Part 1. Concepts and models for information and communications technology security management
GOST R ISO/IEC 15457-1-2006: Identification cards. Thin flexible cards. Part 1. Physical characteristics
GOST R ISO/IEC 15457-2-2006: Identification cards. Thin flexible cards. Part 2. Magnetic recording techniques
GOST R ISO/IEC 15459-3-2007: Automatic identification. International unique identifiers. Part 3. Common rules for unique identifiers
GOST R ISO/IEC 15459-4-2007: Automatic identification. International unique identifiers. Part 4. Unique identifiers of individual items for supply chain management
GOST R ISO/IEC 15459-5-2008: Automatic identification. International unique identifiers. Part 5. Unique identifiers for returnable transport items
GOST R ISO/IEC 15459-6-2009: Automatic identification. Unique identifiers. Part 6. Unique identifiers for product groupings
GOST R ISO/IEC 15504-1-2009: Information technology. Process assessment. Part 1. Concepts and vocabulary
GOST R ISO/IEC 15504-3-2009: Information technology. Process assessment. Part 3. Guidance to performing an assessments
GOST R ISO/IEC 15963-2005: Automatic identification. Radio frequency identification for item management. Unique identification for RF tags
GOST R ISO/IEC 15963-2011: Information technology. Radio frequency identification for item management. Unique identification for RF tags
GOST R ISO/IEC 16085-2007: Risk management. Application for system and software life cycle processes
GOST R ISO/IEC 17000-2009: Conformity assessment. Vocabulary and general principles
GOST R ISO/IEC 17007-2011: Conformity assessment. Guidance for drafting normative documents suitable for conformity assessment
GOST R ISO/IEC 17020-2010: General criteria for the operation of various types of bodies performing inspection
GOST R ISO/IEC 17020-2012: Conformity assessment. Requirements for the operation of various types of bodies performing inspection
GOST R ISO/IEC 17021-2008: Conformity assessment. Requirements for bodies providing audit and certification of management systems
GOST R ISO/IEC 17024-2011: Conformity assessment. General requirements for bodies operating certification of persons
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
GOST R ISO/IEC 17030-2007: General requirements for third party marks of conformity
GOST R ISO/IEC 17040-2010: Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
GOST R ISO/IEC 17050-1-2009: Conformity assessment. Supplier's declaration of conformity. Part 1. General requirements
GOST R ISO/IEC 17050-2-2009: Conformity assessment. Supplier's declaration of conformity. Part 2. Supporting documentation
GOST R ISO/IEC 17799-2005: Information technology. Code of practice for information security management
GOST R ISO/IEC 18028-1-2008: Information technology. Security techniques. IT network security. Part 1. Network security management
GOST R ISO/IEC 19762-1-2011: Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Part 1. General terms relating to AIDC
GOST R ISO/IEC 19762-2-2011: Information technology. Automatic identification and data capture techniques (AIDC). Harmonized vocabulary. Part 2. Optically readable media (ORM)
GOST R ISO/IEC 19762-3-2011: Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Part 3. Radio frequency identification (RFID)
GOST R ISO/IEC 19762-4-2011: Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Part 4. General terms relating to radio communications
GOST R ISO/IEC 19778-1-2011: Information technology. Learning, education and training. Collaborative technology. Collaborative workplace. Part 1. Collaborative workplace data model
GOST R ISO/IEC 19785-1-2008: Automatic identification. Biometrics. Common biometric exchange formats framework. Part 1. Data element specification
GOST R ISO/IEC 19785-2-2008: Information identification. Biometrics. Common biometric exchange formats framework. Part 2. Procedures for the operation of the biometric registration authority
GOST R ISO/IEC 19794-10-2010: Automatic identification. Biometric identification. Biometric data interchange formats. Part 10. Hand geometry silhouette data
GOST R ISO/IEC 19794-4-2006: Automatic identification. Biometrics. Biometric data interchange formats. Part 4. Finger image data
GOST R ISO/IEC 19794-5-2006: Automatic identification. Biometrics. Biometric data interchange formats. Part 5. Face image data
GOST R ISO/IEC 19795-2-2008: Automatic identification. Biometrics. Biometric performance testing and reporting. Part 2. Testing methodologies for technology and scenario evaluation
GOST R ISO/IEC 20000-1-2010: Information technology. Service management. Part 1. Specification
GOST R ISO/IEC 20000-2-2010: Information technology. Service management. Part 2. Code of practice
GOST R ISO/IEC 24713-2-2011: Information technology. Biometrics. Biometric profiles for interoperability and data interchange. Part 2. Physical access control for employees at airports
GOST R ISO/IEC 24778-2010: Information technology. Automatic identification and data capture techniques. Aztec Code bar code symbology specification
GOST R ISO/IEC 27001-2006: Information technology. Security techniques. Information security management systems. Requirements
GOST R ISO/IEC 27004-2011: Information technology. Security techniques. Information security management. Measurement
GOST R ISO/IEC 27005-2010: Information technology. Security techniques. Information security risk management
GOST R ISO/IEC 27006-2008: Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems
GOST R ISO/IEC 27033-1-2011: Information technology. Security techniques. Network security. Part 1. Overview and concepts
GOST R ISO/IEC 29794-1-2012: Information technology. Biometrics. Biometric sample quality. Part 1. Framework
GOST R ISO/IEC 31010-2011: Risk management. Risk assessment methods
GOST R ISO/IEC 7810-2006: Identification cards. Physical characteristics
GOST R ISO/IEC 7816-2-2010: Identification cards. Integrated circuit cards. Part 2. Cards with contacts. Dimensions and location of the contacts
GOST R ISO/IEC 9834-3-2009: Information technology. Open Systems Interconnection. Procedures for the operation of OSI Registration Authorities. Part 3. Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
GOST R ISO/IEC TO 10032-2007: Reference model of data management
GOST R ISO/IEC TO 13335-3-2007: Information technology. Security techniques. Part 3. Techniques for the management of information technology security
GOST R ISO/IEC TO 13335-4-2007: Information technology. Security techniques. Part 4. Selection of safeguards
GOST R ISO/IEC TO 13335-5-2006: Information technology. Security techniques. Part 5. Management guidance on network security
GOST R ISO/IEC TO 18044-2007: Information technology. Security techniques. Information security incident management
GOST R ISO/IEC TO 19791-2008: Information technology. Security techniques. Security assessment of operational systems
GOST R ISO/IEC TO 19795-3-2009: Automatic identification. Biometrics. Part 3. Modality-specific testing
GOST R ISO/TR 10013-2007: Organization management. Guidelines for quality management system documentation
GOST R ISO/TR 10217-2010: Solar energy. Water heating systems. Guide to material selection with regard to internal corrosion
GOST R ISO/TR 8550-1-2007: Statistical methods. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Part 1. General requirements
GOST R ISO/TS 10303-1006-2010: Industrial automation systems and integration. Product data representation and exchange. Part 1006. Application module. Foundation representation
GOST R ISO/TS 10303-1025-2011: Industrial automation systems and integration. Product data representation and exchange. Part 1025. Application module. Alias identification
GOST R ISO/TS 10303-1039-2011: Industrial automation systems and integration. Product data representation and exchange. Part 1039. Application module. Geometric validation property representation
GOST R ISO/TS 10303-1051-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1051. Application module. Geometric tolerance
GOST R ISO/TS 10303-1080-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1080. Application module. Property space
GOST R ISO/TS 10303-1099-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1099. Application module. Independent property definition
GOST R ISO/TS 10303-1131-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1131. Application module. Construction geometry
GOST R ISO/TS 10303-1151-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1151. Application module: Functional data
GOST R ISO/TS 10303-1156-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1156. Application module. Product structure and classification
GOST R ISO/TS 10303-1203-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1203. Application module. Schematic and symbolization
GOST R ISO/TS 10303-1287-2008: Industrial automation systems and integration. Product data representation and exchange. Part 1287. Application modules. AP239 activity recording
GOST R ISO/TS 10811-1-2007: Vibration and shock. Vibration in buildings with sensitive equipment. Part 1. Measurement and evaluation
GOST R ISO/TS 10811-2-2007: Vibration and shock. Vibration in buildings with sensitive equipment. Part 2. Classification
GOST R ISO/TS 14048-2009: Environmental management. Life cycle assessment. Data documentation format
GOST R ISO/TS 18308-2008: Health informatics. Requirements for an electronic health record architecture
GOST R ISO/TS 22600-2-2009: Health informatics. Privilege management and access control. Part 2. Formal models
GOST R ISO/TS 22745-11-2009: Industrial automation systems and integration. Open technical dictionaries and their application to master data. Part 11. Guidelines for the formulation of terminology
GOST R ISO/TS 22745-1-2009: Industrial automation systems and integration. Open technical dictionaries and their application to master data. Part 1. Overview and fundamental principles
GOST R ISO/TS 22745-13-2009: Industrial automation systems and integration. Open technical dictionaries and their application to catalogues. Part 13. Identification of concepts and terminology
GOST R ISO/TS 22745-20-2009: Industrial automation systems and integration. Open technical dictionaries and their application to master data. Part 20. Procedures for the maintenance of an Open Technical Dictionary
GOST R ISO/TS 22745-30-2009: Industrial automation systems and integration. Open technical dictionaries and their application to master data. Part 30. Identification guide representation
GOST R ISO/TS 8000-1-2009: Data quality. Part 1. Overview
GOST R ISO/TU 13732-2-2008: Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 2. Contact with moderate temperature surface
GOST R ISO/TU 16949-2009: Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
GOST R ISO/TU 29001-2007: Enterprise management. Requirements for quality management systems of product and service supply organizations in petroleum, petrochemical and natural gas industries
Guidelines 2-4-71-1-28: Methodological recommendations on the organization of inspections in the field of fire safety at protection facilities
I 101-06: System of accreditation of laboratories conducting sanitary and epidemiological research, testing. Guidelines. General accreditation procedure
I 102-06: System of accreditation of laboratories carrying out sanitary and epidemiological studies, tests. Accreditation rules. Registration and publication of rules and recommendations for accreditation
Information: List of acts containing mandatory requirements, compliance with which is assessed in the course of control activities in the course of federal state construction supervision
Instruction 355-r: On the application and publication of ODM 218.4.4.001-2020 "Methodology for assessing the durability of spiral metal corrugated pipes used in road construction"
Instruction 413-r: On the application and publication of ODM 218.4.1.003-2021 "Guidelines for the commissioning of capital construction and overhaul facilities"
ITS 22.1-2016: General principles of industrial environmental control and its metrological support
ITS 38-2017: Fuel combustion in large plants for energy production
ITS 46-2017: Reducing emissions of pollutants, discharges of pollutants during storage and warehousing of goods (goods)
ITS 46-2019: Reducing emissions of pollutants, discharges of pollutants during storage and warehousing of goods (goods)
Law of the Russian Federation 4973-1: On Grain (as amended on June 28, 2021) (version effective from July 1, 2021)
Letter 05-32/10938: On clarification of the status of OST 218.1.002-2003 "Bus stops on highways. General technical requirements".
Letter 09-03-03/3237: About voluntary certification
Letter 15-0/OOG-179: On testing ladders for labor protection purposes
Letter 15-2/OOG-2265: On appeal (assessment) of decisions of state labor inspectors
Letter 25-50/10539-OG: Consideration of the appeal on the sale of wastes of hazard classes I-IV
Letter 30-44-22: On clarification of the norms of the national standard GOST R 57974-2017
Letter 36708-VK/08: On the need to verify the requirements for input control of products in the design documentation at the stage of examination of the project and the mandatory nature of the procedure of input control of construction products, as well as bringing to administrative responsibility of persons authorized to perform construction control
Letter 43-222-19: Guidelines on the organization and conduct of state control (supervision) over the products in circulation on the territory of the Russian Federation, subject to mandatory confirmation of compliance with fire safety requirements
Letter 5024/05-AB: About consideration of the appeal
Letter IV-117-1824-13-4: On the application of regulatory documents
Management system of the Federal Service for Accreditation 02.1-3.00: Instructions for the work of certification bodies for products, processes and services with a configurator of accreditation areas. Version 01. February 2021
Management system of the Federal Service for Accreditation 03.1-9.00: Accreditation schemes in the national accreditation system for conformity assessment
MDS 12-15.2003: Guidelines for the preparation of the separation statement of the customer-contractor’s supplies
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 12-35.2007: Methodological manual for the development of administrative and regulatory documentation of the labor protection management system of a construction organization
MDS 12-46.2008: Recommended practices for development and preparation of construction management plans, work organization plans for demolition (teardown) and method statements.
MDS 12-53.2010: Layouts of administrative and regulatory documents of the labor protection management system of a construction organization. Toolkit
MDS 12-55.2010: The order of operation of the sectoral subsystem DSSOT for certification of labor protection management systems of construction organizations
MDS 31-13.2007: Design guidelines for the safety and comfort of industrial buildings
MDS 82-1.2005: Guidance on preparation of responsibility matrix for supply of material resources between customers and contractors of capital construction (for objects of JSC Gazprom)
Methodical manual: Building Design for Refrigerators
Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities
Methodical manual: Hotel building design
Methodical manual: Classification methods of information modeling tasks
Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation
MI 2304-08: GSOEI. Metrological supervision carried out by the metrological services of legal entities. Main provisions
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3565-2016: Recommendation. State system for ensuring uniformity of measurements. Typical software for conformity confirmation (certification) of software requirements of GOST R ISO
MI 3566-2016: State system for ensuring uniformity of measurements. Typical test methods and conformity assessment (certification) of measuring instruments software
MPPB 57-01-001-2002: Methodical manual on the program: "Industrial safety" (for managers and specialists)
MR 1.2.0016-10: Classification of nanotechnologies and nanoindustry products by the degree of their potential danger
MR 1.2.0018-11: Sampling procedure and methods for determining the content of nanoparticles in the composition of household chemical products, disinfectants and perfumes and cosmetics
MR 1.2.0022-11: Sampling procedure for nanomaterials control
MR 1.2.0023-11: Control of nanomaterials in the food industry
MR 1.2.0024-11: Control of nanomaterials used in the chemical industry
MR 1.2.0036-11: Control of nanomaterials in disinfectants and household chemicals
MR 1.2.0037-11: Control of nanomaterials in the air
MR 1.2.0039-11: Control nanomaterials in packaging materials
MR 1.2.0040-11: Control of nanomaterials in the perfumery and cosmetic industry
MR 1.2.0042-11: Control of nanomaterials used in agriculture
MR 1.2.0043-11: Control of nanomaterials in the environment
MR 1.2.0044-11: The procedure for identifying and identifying fullerene C60 aggregates in animal and plant tissue sections by analytical electron microscopy
MR 1.2.0045-11: The procedure for the detection and identification of multi-walled carbon nanotubes in sections of animal and plant tissues by analytical electron microscopy
MR 1.2.0046-11: The use of the energy dispersive microspectroscopy method for the analysis of silver nanoparticles, zinc, aluminum and cerium oxides in animal and plant tissues
MR 1.2.0047-11: Electron microscopy detection of structural changes caused by artificial nanoparticles in animal and plant cells
MR 1.2.0048-11: The procedure and methods for determining the organotropic and toxicokinetic parameters of artificial nanomaterials in tests on laboratory animals
MR 1.2.0052-11: Evaluation of the Impact of Nanomaterials on Immunity Function
MR 1.2.0053-11: Evaluation of the effects of nanomaterials on the proteomic profile and biosynthetic processes in tests on laboratory animals
MR 1.2.0054-11: The procedure and methods for evaluating the effects of artificial nanoparticles and nanomaterials on the toxic effects of chemicals
MR 1.2.0074-13: The use of indicators and criteria for violation of the biotransformation of benzene in the body of children for the tasks of hygienic assessments, sanitary-epidemiological investigations and examinations
MR 1.2.2522-09: Recommended practice for identification of finanomaterials that pose a potential risk to human health
MR 1.2.2640-10: Sampling methods, detection and determination of the content of nanoparticles and nanomaterials in the composition of agricultural, food products and packaging materials
MR 2.1.4.0032-11: Integral assessment of drinking water of centralized water supply systems by chemical safety indicators
MR 2.2.0085-14: Evaluation and forecast of professional reliability and professional risk of drivers of various motor vehicles
MR 2.3.7.0153-19: Assessment of the quality of food products and assessment of the population's access to domestic food products, contributing to the elimination of macro- and
MR 2.3.7.0168-20: Assessment of the quality of food products and assessment of the population's access to domestic food products, contributing to the elimination of macro- and micronutrient deficiencies
MR 4.2.0019-11: Identification of raw material composition of meat products. Methodological recommendations
MR 5.1.0029-11: Guidelines for the economic assessment of risks to public health when exposed to environmental factors
MR 5.1.0030-11: Guidelines for the economic assessment and justification of decisions in the field of risk management for public health when exposed to environmental factors
MU 1.2.2520-09: Toxicological and hygienic safety assessment of nanomaterials
MU 1.2.2634-10: Microbiological and molecular genetic assessment of the effects of nanomaterials on microbiocenosis representatives
MU 1.2.2635-10: Medical and biological evaluation of nanomaterials safety
MU 1.2.2637-10: Procedure and methods of control of nanoparticles migration from packaging
MU 1.2.2638-10: Safety assessment of packaging materials contacting with food obtained by use of nanotechnology
MU 1.2.2740-10: Sampling procedure for identifying, identifying and characterizing the action of nanomaterials in aquatic invertebrates
MU 1.2.2741-10: Sampling procedure for the identification and identification of nanomaterials in laboratory animals
MU 1.2.2744-10: Sampling procedure for the identification and identification of nanomaterials in fish
MU 1.2.2745-10: Sampling procedure for characterizing the action of nanomaterials on laboratory animals
MU 1.2.2869-11: The procedure for assessing the toxic effects of nanomaterials on laboratory animals
MU 1.2.2873-11: The procedure for the identification and identification of nanomaterials in aquatic invertebrates
MU 1.2.2874-11: The procedure for the identification and identification of nanomaterials in laboratory animals
MU 1.2.2875-11: The procedure for the identification and identification of nanomaterials in water bodies
MU 1.2.2876-11: The procedure for the identification and identification of nanomaterials in plants
MU 1.2.2877-11: The procedure for the identification and identification of nanomaterials in fish
MU 1.2.2960-11: Scientific rationale for maximum allowable levels of pesticide residues in food products
MU 1.2.2961-11: Scientific substantiation of permissible levels of contaminants of chemical nature and food additives in food
MU 1.2.2966-11: The procedure and organization of control over nanomaterials
MU 1.2.2967-11: The procedure for assessing the effect of nanomaterials on fish on the basis of morphological and genetic features.
MU 1.2.2968-11: The order of biological assessment of the effects of nanomaterials on plants according to morphological features. Methodical instructions
MU 1.2.3216-14: Evaluation of the risk of exposure of the population to pesticide residues in food
MU 2.2.5.2810-10: Laboratory monitoring of harmful substances in air of working zone of enterprises of main industry sectors
MU 2.3.2.2789-10: Guidelines for the sanitary-epidemiological assessment of the safety and functional potential of probiotic microorganisms used for food production
MU 2.6.1.2135-06: Hygienic requirements for radiation safety during radiation therapy by sealed radioactive sources
MU 4.1/4.2.2484-09: Guidelines for the assessment of authenticity and identification of falsification of dairy products
MU 4.1/4.2.2486-09: Methodical instructions on identification, including for the purpose of revealing falsification, juice products from fruits and vegetables
NTP 1.30.03.01-06: Norms of technological design of irrigation systems using livestock runoff
NTP-APK 1.10.09.002-04: Standards of technological design of complexes for the cultivation of champignons
NTP-APK 1.10.09.003-04: Norms of technological design of oyster mushroom growing complexes
NTP-APK 1.10.13.001-03: Norms of technological design of warehouses of solid mineral fertilizers and chemical ameliorants
NTP-APK 1.10.16.002-03: Norms of technological design of agricultural enterprises for the production of animal feed
NTP-APK 1.20.02.001-04: Standards for technological design of small confectionery production enterprises
ODM 218.1.001-2005: Recommendations for the development and application of technical regulation documents in the field of road facilities
ODM 218.1.001-2010: Recommendations for the development and application of technical regulation documents in the field of road facilities
ODM 218.1.001-2020: Recommendations for the development and application of technical regulation documents in the field of road facilities
ODM 218.1.002-2010: Recommendations for the organization and conduct of work on standardization in the road sector
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
ODM 218.2.003-2009: Guidelines for the specialized prediction of the state of the road surface
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.032-2013: Guidelines for accounting for the movement of vehicles on highways
ODM 218.2.037-2013: Guidelines for survey work in the overhaul of roads
ODM 218.2.041-2014: Requirements for the arrangement of road sections at the entrances to the checkpoints of vehicles across the state border of the Russian Federation
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.2.045-2014: Recommendations for the Design of Forest Snow Retaining Plantations along Highways
ODM 218.2.053-2015: Recommendations for seismic impact assessment in determining the sustainability of landslide sections of roads
ODM 218.2.054-2015: Recommendations for the use of textile-sand piles in the construction of roads on weak grounds
ODM 218.2.061-2015: Recommendations for determining the thermophysical properties of road-building materials and soils
ODM 218.2.064-2015: Methods for strengthening the slopes of the roadbed of roads by sowing grass in various climatic zones
ODM 218.2.065-2015: Guidelines for increasing the service life of non-rigid pavements between repairs
ODM 218.2.073-2016: Guidelines for assessing the capacity of intersections and junctions of highways at the same level to optimize their work using computer simulation methods
ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.2.086-2019: Guidelines for geocryological forecasting of the stability of road structures in the design, construction and operation of roads
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
ODM 218.2.097-2019: Recommendations on the use of geo-environmental protection technologies in the design, construction and operation of roads
ODM 218.2.099-2019: Guidelines on the features of environmental engineering surveys in the design of public roads
ODM 218.3.001-2007: Methodical recommendations on the technology of using the cadem-type surfactant additive Cadem-VT in the construction of asphalt concrete pavements
ODM 218.3.008-2011: Recommendations for monitoring and inspection of retaining walls and retaining structures on landslide roads
ODM 218.3.031-2013: Guidelines for environmental protection in the construction, repair and maintenance of roads
ODM 218.3.032-2013: Guidelines for strengthening the structural elements of roads by spatial geogrids
ODM 218.3.041-2014: Guidelines for the reinforcement of asphalt concrete pavement layers with steel nets
ODM 218.3.041-2020: Methodological recommendations for reinforcing asphalt concrete layers of road pavements with steel meshes
ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways
ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei
ODM 218.3.049-2015: Guidelines for the use of multi-layer composite drainage materials (geodren) to drain and strengthen road structures in the construction and reconstruction of roads
ODM 218.3.050-2015: Guidelines for testing and evaluating the effectiveness of machinery and attachments for maintaining roads
ODM 218.3.052-2015: Guidelines for the preparation of the territory for the construction and reconstruction of general purpose roads of federal significance
ODM 218.3.053-2015:
ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads
ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
ODM 218.3.096-2017: Guidelines for the volumetric design of asphalt mixtures according to the Marshall Methodology
ODM 218.3.102-2017: Guidelines for the construction of asphalt pavement under adverse weather conditions
ODM 218.3.105-2018: Guidelines for organizing the interaction of participants in the development of design working documentation for pilot projects for the construction, overhaul and reconstruction of roads using BIM technology
ODM 218.3.106-2018: The use of flexible concrete surface coatings to protect and strengthen roads
ODM 218.4.001-2009: Method for assessing the transport and operational status of mountain road tunnel crossings
ODM 218.4.009-2011: Guidelines for assessing the vulnerability of transport infrastructure of automobile transport
ODM 218.4.024-2016: Methods for estimating the timing of road construction work under the influence of destabilizing factors
ODM 218.4.025-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. a common part
ODM 218.4.026-2016: Recommendations for determining the carrying capacity of operated bridges on public roads. Concrete and reinforced concrete structures
ODM 218.4.027-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. Metal and steel-reinforced concrete structures
ODM 218.4.028-2016: Recommendations for determining the carrying capacity of existing bridges on public roads. Support parts, supports and foundations
ODM 218.4.029-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. Determination of the load-carrying capacity of wooden bridges
ODM 218.4.031-2016: Recommendations on the organization and conduct of departmental control (monitoring) of quality during the performance of road works on federal public roads
ODM 218.5.001-2008: Recommendations on joint cutting in base layers of asphalt pavements
ODM 218.5.003-2010: Recommendations for the use of geosynthetic materials in the construction and repair of roads
ODM 218.5.006-2008: Guidelines for the use of environmentally friendly anti-icing materials and technologies in the maintenance of bridge structures
ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)
ODM 218.5.009-2008: Technology for magnetic diagnostics of prestressed reinforcement and assessment of the technical condition of reinforced concrete beams of bridge structures
ODM 218.6.002-2010: Guidelines for determining the allowable axle loads of vehicles in the spring period based on the results of diagnostics of public roads of federal significance
ODM 218.6.017-2015: Guidelines for the use of various types of road barriers on federal highways
ODM 218.6.021-2019: Guidelines for the use of clean low-temperature deicing materials for winter road maintenance
ODM 218.6.023-2017: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
ODM 218.6.024-2017: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
ODM 218.6.025-2017: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
ODM 218.6.026-2017: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
ODM 218.6.027-2017: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
ODM 218.6.028-2017: Guidelines on introduction of traffic temporary restrictions or congestion on public roads of federal importance to ensure road safety
ODM 218.6.029-2017: Recommendations on the establishment of warranty periods for structural elements of highways and technical means of traffic management
ODM 218.6.030-2017: Recommendations for establishing and warranty periods and service life of structural elements of bridge structures
ODM 218.8.001-2009: Guidelines for the specialized hydrometeorological provision of road facilities
ODM 218.8.002-2010: Guidelines for the winter maintenance of roads using specialized hydrometeorological information (for experimental use)
ODM 218.8.003-2010: Recommendations for the application of standards GOST R ISO 14001-2007 in the road sector
ODM 218.8.004-2013: Recommendations for improving the economic effect of use of right of way and roadside roads of general use of federal significance
ODM 218.9.002-2014: System of automated planning, control and accounting of works on maintenance of federal public roads based on GLONASS technologies using the Dortransnavigation software package
OIT-0004-1999: System of certification of equipment, products and technologies for nuclear installations, radiation sources and storage facilities. Certification Procedure
Order 1007: On Amendments to the List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of 22 July 2008 N 123-FZ "Technical Regulations on Fire Safety Requirements", approved by order of the Federal Agency for Technical Regulation and Metrology of 14 July 2020 N 1190
Order 1045-r: On the application and publication of ODM 218.11.005-2021 "Guidelines for the metrological support of measurements, tests and control in the road sector"
Order 1046-r: On the application and publication of ODM 218.11.006-2021 "Guidelines for assessing the effectiveness of the use of innovations and achievements of scientific and technological progress in the road sector"
Order 1047-r: On the application and publication of ODM 218.3.1.006-2021 "Guidelines for the design of light embankments on weak foundations using light geocomposite materials"
Order 1060-st: On the approval of the national standard
Order 1061-st: On the approval of the national standard
Order 1062-st: On the approval of the national standard
Order 1063-st: On the approval of the national standard
Order 1064-st: On the approval of the national standard
Order 1091-st: On the approval of the national standard
Order 1092-st: On the approval of the national standard
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1155: Model program on the course "Industrial, Environmental, Energy Safety, Safety of Hydraulic Structures" for pre-certification (pre-examination) training of managers and specialists of organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision.
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 127: Administrative Regulations of the Federal Service for Supervision in the Sphere of Transport of the State Function of Implementation of Federal State Transport Supervision of Compliance with the Requirements of the Technical Regulations of the Customs Union "On Safety of Railway Rolling Stock" (TR CU 001/2011)
Order 12850a: List of acts containing mandatory requirements, compliance with which is assessed during control measures in the implementation of federal state control over the activities of accredited entities
Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 1326: On amendments to the form of the checklist (a list of control questions, the answers to which indicate compliance or non-compliance of the controlled person with mandatory requirements) used in the implementation of federal state control (supervision) over compliance with the requirements established by technical regulations for wheeled vehicles (chassis) and components of vehicles (chassis) in circulation (before their operation), motor gasoline, diesel fuel, marine fuel and Maz
Order 1343: On approval of the form of the checklist (a list of control questions, the answers to which indicate compliance or non-compliance of a controlled person with mandatory requirements) to be used when the Federal Service for Veterinary and Phytosanitary Supervision carries out federal state control (supervision) in the field of quality and safety of grain and grain products
Order 1378: On the Lists of normative legal acts (their individual provisions) containing mandatory requirements that are assessed by Rosselkhoznadzor within the framework of state control (supervision), bringing to administrative responsibility, granting licenses and other permits
Order 1397: On the establishment of a joint secretariat of technical committees for standardization
Order 141-st: On the approval of the national standard
Order 141-st: On the restriction of the application of the interstate standard in the territory of the Russian Federation
Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 17: Requirements for the protection of information that is not a state secret contained in state information systems
Order 1865: On approval of the procedure for labeling products, the conformity of which has been confirmed in the manner prescribed by Article 46 of the Federal Law of December 27, 2002 N 184-FZ "On Technical Regulation"
Order 190: Rules for the carriage of passengers by sea
Order 191: Unified forms of transportation documents for cargo transportation by rail
Order 191: Administrative regulations for the execution by the Federal Service for Supervision of Natural Resources of the state function to carry out federal state environmental oversight
Order 191: Administrative Regulations of the Federal Service for Supervision of Natural Resources to provide the public service of issuing permits (administrative licenses) for the circulation of wild animals belonging to species listed in the Red Book of the Russian Federation
Order 1934: On the approval of the forms of the certificate of conformity and the declaration of conformity and the composition of the information contained therein
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
Order 217 / pr: On the establishment of an interdepartmental Working Group on bringing into compliance the codes of practice in the field of construction approved by the Ministry of Construction and Housing and Communal Services of the Russian Federation, and the codes of fire safety approved by the Ministry of the Russian Federation for Civil Defense, Emergencies and Disaster Relief
Order 2188: Model Provision on the territorial body of the Federal Agency for Technical Regulation and Metrology
Order 2234: On Amendments to the List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of 22 July 2008 N 123-FZ "Technical Regulations on Fire Safety Requirements", approved by order of the Federal Agency for Technical Regulation and Metrology of 14 July 2020 N 1190
Order 2266: On approval of the list of normative legal acts (their individual provisions) containing mandatory requirements that are assessed as part of the federal state metrological control (supervision), federal state control (supervision) of compliance with the requirements established by technical regulations for wheeled vehicles (chassis) and components of vehicles (chassis) in circulation (before their operation), motor gasoline, diesel fuel, marine fuel
Order 2374: About the procedure for consideration and passage of documents upon accreditation at the Federal Agency for Technical Regulation and Metrology in the field of confirmation of conformity and in the field of ensuring the uniformity of measurements
Order 237-st: On approval of the national standard
Order 248/pr: The procedure for the development and approval of special technical conditions for the development of design documentation for a capital construction object
Order 2501: On approval of the list of regulatory legal acts (their individual provisions) containing mandatory requirements, the assessment of compliance with which is carried out as part of the federal state metrological control (supervision) and federal state control (supervision) of compliance with the requirements established by technical regulations in relation to wheeled vehicles (chassis) and components of vehicles (chassis) in circulation (before their operation), motor gasoline, diesel fuel, marine fuel oil
Order 2502: On Amendments to the Order of the Ministry of Industry and Trade of the Russian Federation from July 9, 2020 N 2188 "On Approval of the Model Provision on the territorial body of the Federal Agency for Technical Regulation and Metrology".
Order 2511-r: On the application and publication of ODM 218.3.041-2020 "Guidelines for the reinforcement of asphalt layers of road pavements with steel meshes"
Order 2514: Administrative Regulations of the Federal Agency for Technical Regulation and Metrology of the state function to exercise state control (supervision) over compliance with the mandatory requirements of national standards and technical regulations
Order 2520-r: On the application and publication of ODM 218.3.1.002-2020 "Typical technical solutions for embankments on pile foundations with a flexible grillage made of geosynthetic materials"
Order 2521-r: On the application and publication of ODM 218.3.1.001-2020 "Methodological recommendations for the calculation of flexible grillage using geosynthetic materials. Basic principles of calculations"
Order 2651: On Amendments to the Provisions on Interregional Territorial Departments of the Federal Agency for Technical Regulation and Metrology
Order 2848-r: On the application and publication of ODM 218.3.120-2020 "Methodological recommendations for the calculation of road embankments on soft base soils using geosynthetic materials"
Order 2849-r: On the application and publication of ODM 218.2.110-2020 "Methodological recommendations for hydraulic calculations of spiral metal corrugated pipes"
Order 2871-r: On the application and publication of ODM 218.10.001-2020 "Guidelines for the development of a typical architecture of a departmental intelligent transport system in the field of road transport and road facilities"
Order 2919: Regulations on the North-West Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2920: Regulations on the Volga Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2921: Regulations on the Central Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2922: Regulations on the Ural Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2923: Regulations on the Siberian Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2924: Regulations on the Far Eastern Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 3053: Regulations on the Southern Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 334-st: On the approval of the national standard
Order 340: On approval of the Rules of state registration of small vessels under supervision of the State Inspectorate of Small-Sized Vessels of the Ministry of the Russian Federation for Civil Defense, Emergencies and Elimination of Consequences of Natural Disasters (expired on 01.03.2022 through the order of the Russian Ministry of Emergency Situations N 355 of 01.06.2021)
Order 350: On the establishment of a fishing limit for freshwater perch in the Tsimlyansk reservoir within the boundaries of the Rostov region in 2017
Order 350: On accreditation of the centers of standardization, metrology and certification and metrological research institutes of Gosstandart of Russia for technical competence in the field of calibration of measuring instruments
Order 3725: On approval of the form of the certificate of conformity
Order 3726: On approval of the form of the declaration of conformity
Order 380: Administrative Regulations of the Ministry of Internal Affairs of the Russian Federation execution of state function to implement the federal state supervision of road safety in terms of compliance with the road safety legislation of the Russian Federation, rules, standards, technical standards and other requirements of regulatory documents in the field of road safety in the construction, reconstruction, repair and operation of roads
Order 394/pr: The order of development and approval of sets of rules and updating of previously approved construction norms and rules, sets of rules in the field of construction in the Ministry of Construction, Housing and Communal Services of the Russian Federation
Order 398a: Regulations on the Welding Production Certification System at facilities controlled by the Federal Environmental, Industrial and Nuclear Supervision Service
Order 4080: About the procedure for consideration and passage of documents upon accreditation at the Federal Agency for Technical Regulation and Metrology
Order 4414: The list of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations "On Personal Protective Equipment Safety" approved by Decree of the Government of the Russian Federation on December 24, 2009 № 1213
Order 478: On approval of the Procedure for the registration of declarations of conformity and the Procedure for the formation and maintenance of a single register of registered declarations of conformity, provision of information contained in the specified register
Order 478: On the approval of federal norms and rules in the field of industrial safety "Basic requirements for non-destructive testing of technical devices, buildings and structures at hazardous production facilities"
Order 480: Rules for the preparation of documentation on the organization of road traffic
Order 480: The procedure for conducting a technical investigation of the causes of accidents, incidents and cases of loss of industrial explosives at facilities supervised by the Federal Service for Environmental, Technological and Nuclear Supervision
Order 4800: On the approval of the List of regulatory legal acts (their individual provisions) containing mandatory requirements, the compliance with which is assessed by the Ministry of Industry and Trade of Russia within the framework of licensing control of activities for the development, production, testing and repair of aviation equipment, bringing to administrative responsibility
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
Order 515: Federal norms and rules in the field of industrial safety "Rules for the safe operation of infield pipelines"
Order 515: On the approval of the Federal norms and rules in the field of industrial safety "Instructions for predicting dynamic phenomena and monitoring the rock mass during the development of coal deposits"
Order 519: On approval of the Federal norms and rules in the field of industrial safety "Requirements for the production of welding at hazardous production facilities"
Order 519: On approval of the Federal Aviation Rules "Requirements for the airworthiness of civil aircraft. The form and procedure for issuing a certificate of airworthiness for a civil aircraft. Procedure for suspending and canceling a certificate of airworthiness for a civil aircraft."
Order 5214: On approval of the List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations "On safety of gas distribution and gas consumption networks" approved by the Government of the Russian Federation on October 29, 2010 N 870 (as amended on April 22, 2013) (lost force from 01.04.2022 on the order of Rosstandart from 10.01.2022 N 3)
Order 5214: The list of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of application and execution of the Government of the Russian Federation of October 29, 2010 № 870 "On approval of technical regulations on the safety of gas distribution and gas consumption networks" (as amended on June 23, 2011) and implementation of conformity assessment
Order 533: On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Order 533: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"
Order 5346: On reorganization of the technical committee for standardization TC 438 "Lifts with working platforms"
Order 5362: On approval of the list of indicators of risk of violation of mandatory requirements for federal state control (supervision) of compliance with the requirements established by technical regulations for wheeled vehicles (chassis) and components of vehicles (chassis) in circulation (before their operation), motor gasoline, diesel fuel, marine fuel and fuel oil, or mandatory requirements to be applied before the entry into force of technical regulations in accordance with the Federal Law "On
Order 542: Federal norms and rules in the field of industrial safety "Safety rules for gas distribution and gas consumption networks"
Order 542: On approval of standard lease agreements for forest areas
Order 565-r: On the application and publication of ODM 218.11.001-2021 "Guidelines for providing highways with alternative sources of electricity and heat"
Order 566-r: On the application and publication of ODM 218.8.10.001-2020 "Guidelines for import substitution technologies in the preparation of cationic bitumen-polymer emulsions"
Order 567-r: On the application and publication of ODM 218.3.1.005-2021 "Design of non-rigid road pavements. Guidelines for calculating the parameters of the stress-strain state of multilayer structures under the influence of wheel loads"
Order 570-r: On the application and publication of ODM 218.6.1.005-2021 "Guidelines for the restoration of asphalt concrete pavements and road bases by the method of cold regeneration"
Order 571-r: On the application and publication of ODM 218.6.1.004-2020 "Guidelines for the determination of clogging (mechanical clogging) of geosynthetic materials for the road sector during the operation period"
Order 572-r: On the application and publication of ODM 218.6.1.003-2021 "Methodological recommendations on technologies for eliminating deformations and damage using various types of special asphalt concrete mixtures when performing urgent work"
Order 572-st: On the approval of the national standard
Order 573-st: On the approval of the national standard
Order 583-r: On the application and publication of ODM 218.6.1.008-2021 "Guide to the road foreman on the organization of work during the operation of highways"
Order 586-r: On the application and publication of ODM 218.4.1.004-2021 "Recommendations for the substantiation of the parameters and technology for the construction of pavements using prestressed reinforced concrete pavements"
Order 611-st: On the approval of the national standard
Order 612-st: On the approval of the national standard
Order 713: On approval of the Veterinary rules for assignment and veterinary and sanitary expertise of natural bee honey, apical needles and royal jelly intended for processing and sale
Order 744: On approval of the List of legal acts and their individual parts (provisions) containing mandatory requirements, compliance with which is assessed when the Rosselkhoznadzor conducts measures for state control (supervision) and the Procedure for its maintenance
Order 759-st: On the approval of the national standard
Order 787-st: On the approval of the national standard
Order 789: On the approval of the national standard
Order 790: On the approval of the national standard
Order 791-st: On the approval of the national standard
Order 792-st: On the approval of the national standard
Order 793-st: On the approval of the national standard
Order 794-st: On the approval of the national standard
Order 795-st: On the approval of the national standard
Order 796-st: On the approval of the national standard
Order 799: On the approval of the national standard
Order 801-st: On the approval of the national standard
Order 803-st: On the approval of the national standard
Order 808: On approval of the forms of checklists (lists of control questions, the answers to which indicate compliance or non-compliance of a supervised person with mandatory requirements) used by the Federal Service for Supervision of Consumer Rights Protection and Human Welfare, its territorial bodies and its subordinate federal public institutions in carrying out scheduled control (surveillance) activities (raid inspections, on-site inspections) in the implementation of the federal state sanitary and epidemiological
Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 9260: Administrative Regulations of the Federal Service for Supervision of Health Care on the implementation of state control over the circulation of medical devices
Order 934-r: On the application and publication of ODM 218.6.1.006-2021 "Guidelines for hot regeneration of asphalt concrete pavements"
Order 97-rp: On approval of testing issues under the section "Safety requirements for hydraulic structures" of the List of areas of certification in the field of industrial safety, safety of hydraulic structures, safety in the electric power industry, approved by order of the Federal Service for Environmental, Technological and Nuclear Supervision of September 4, 2020 N 334
Order 985-st: On the approval of the national standard
Order 997: On approval of the Regulations on the procedure for the placement in rock formations of associated waters and waters used by subsoil users for their own production and technological needs in the exploration and production of hydrocarbons, the development of technologies for geological exploration, exploration and production of hard-to-recover minerals or, under a combined license, for the development of technologies for geological exploration , exploration and production of hard-to-recover minerals, exploration and production of such minerals, and waters generated by subsoil users engaged in exploration and production, as well as primary processing of potash and magnesium salts, within the boundaries of subsoil plots provided to them on the basis of an approved technical design
Order VB-793fs: List of normative legal acts containing mandatory requirements for the types of business activities carried out in a notification procedure of the Federal Service for Transport Supervision
Ordinance 1062-r: On application and publication of ODM 218.5.2.001-2022 "Methodical recommendations on partial replacement of reinforced concrete beams of the operating span with steel reinforced concrete beams and reinforced concrete beams during overhauls, repairs and emergency works"
Ordinance 13-rp: On the approval of examination tickets (tests) for section A "General requirements for industrial safety" Areas of certification (knowledge testing) of managers and specialists of organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision, approved by order of the Federal Service for Environmental, Technological and Nuclear Supervision from April 6, 2012 N 233
Ordinance 1697-r: Action Plan (Road Map) for the Development of Competition in Sectors of the Economy of the Russian Federation and the Transition of Individual Areas of Natural Monopolies from Natural Monopolies to the Competitive Market for 2018 - 2020
Ordinance 1737-r: On the publication and application of ODM 218.2.075-2016 "Methodological recommendations on the use of structural composite meshes and grids instead of steel when using them to strengthen the tunnel vaults and retaining walls by shotcreting".
Ordinance 2481-p: On the application and publication of ODM 218.4.039-2018 "Recommendations for the diagnosis and assessment of the technical condition of highways"
Ordinance 2524-r: On the application and publication of ODM 218.2.103-2020 "Guidelines for the use of expanded polystyrene in the design, construction and reconstruction of lightweight embankments on weak soils
Ordinance 2897-r: On the application and publication of ODM 218.4.1.006-2021 "Recommendations for the use of multisection geosheaths in the construction of the subgrade"
Ordinance 366-r: On the application and publication of ODM 218.11.007-2023 "Methodological recommendations on the organization of engineering-geocryological monitoring and equipment of engineering-geocryological monitoring stationary posts in the road right-of-way in the cryolithic zone".
Ordinance 3795-r: On the application and publication of ODM 218.6.2.001-2020 "Guidelines for equipping artificial structures on highways with systems for ensuring anti-icing conditions"
Ordinance 3796-r: On the application and publication of ODM 218.4.1.001-2020 "Guidelines for the use of heavy (fat) clays reinforced with binders in the construction of road beds of highways"
Ordinance 3797-r: On the application and publication of ODM 218.8.8.001-2020 "Guidelines for the development of high strength concrete compositions based on highly dispersed and finely ground aggregates (mineral and technogenic substances, including ground cullet) in road construction"
Ordinance 4060-r: On the application and publication of ODM 218.6.1.001-2020 "Recommendations for the use of bore-injection tubular systems (micropiles, ground anchors and dowels) on highways"
Ordinance 4144-r: On the application and publication of ODM 218.11.004-2020 "Methodological recommendations on the procedure for assessing the level of maintenance of public highways of federal importance (for experimental use)"
Ordinance 4155-r: On the application and publication of ODM 218.4.1.002-2020 "Organization and conduct of geotechnical monitoring during the construction of subgrade on soft soils"
Ordinance 4542-r: On the application and publication of ODM 218.3.1.007-2022 "Methodological recommendations on the installation of compacted piles of inorganic bulk materials in the foundation of the road bed".
Ordinance 4782-r: About application and publication of ODM 218.7.2.001-2021 "Guidelines for remote sensing of presence and progress of fatigue cracks in the elements of metal spans of road bridges (including orthotropic plates) by infrared thermography".
Ordinance 84-r: Strategy for Industry Development for Processing, Utilization and Decontamination of Industrial and Consumption Wastes for the period up to 2030
Ordinance VT-235-r: On approval of the methodological recommendations for the maintenance of artificial structures in the field of railway transport
OSN-APK 2.10.14.001-04: Standards for the design of administrative, household buildings and premises for livestock, animal and poultry farms and other agricultural facilities
OSN-APK 2.10.24.001-04: Lighting standards for agricultural enterprises, buildings and structures
OT 1.1.8.02.1177-2016: Quality assurance program in the development and manufacture of products supplied to nuclear power plants. Content and Development Requirements
P SSFZhT 01-2005: Rules for the Operation of the System of Voluntary Certification in the Railway Transport of the Russian Federation
P SSFZhT 02-2005: The order of application of the mark of conformity of the System of voluntary certification on the railway transport of the Russian Federation
P SSFZhT 43-2003: The certification system on the federal railway transport of the Russian Federation. The procedure for the adoption of a declaration of conformity and its registration
PB 03-428-02: Safety Requirements for Construction of Underground Structures
PB 08-37-2005: Exploration Safety Rules
PB 10-77-94: Installation and Safe Operation Requirements for Escalators
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
PCSN 2014 MO: The procedure for pricing and budgeting in the construction of the Moscow region
PND F 12.15.1-08: Guidelines for sampling for sewage analysis.
PNST 138-2016: Conformity assessment in the field of use of nuclear energy. Procedure of products certification
PNST 141-2016: Conformity assessment in the field of use of nuclear energy. Procedure for recognition of results (reports) of tests
PNST 158-2016: Conformity assessment in the field of use of nuclear energy. Methods of assessing the cost of product certification and inspection control
PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements
PNST 300-2018: Conformity assessment. Recommendations for quality manual content of certification body
PNST 369-2019: Mining engineering. Mining Explosion Systems. General technical requirements
PNST 370-2019: Automated remote control systems for shunting locomotives. General technical requirements
PNST 58-2015: Conformity assessment. Requirements for expert auditor. Expert auditor for assurance of conformity. General requirements
PNST 761-2023: Security in emergency situations. Safe City. Terms and definitions
PO 1.3.2.13.1054-2015: The management system for the provision of personal protective equipment for employees of Rosenergoatom Concern JSC
PR 108-2010: Regulations on standards of units used in the state regulation of ensuring the uniformity of measurements
PR 1323565.1.002-2018: Regulations of fillings and representation of catalogue sheets of products
PR 50.1.008-2009: Organization and implementation of work international standardization in the Russian Federation
PR 50.1.024-2005: Basic Provisions and the Order of Work on the Development, Maintenance and Application of All-Russian Classifiers
PR 50.1.025-2007: Technique of formation of the list of national standards and (or) the summary of rules as a result of which application on a voluntary basis the observance of requirements of the technical regulations is provided
PR 50.1.074-2004: Preparation of draft national standards of the Russian Federation and draft amendments thereto for approval, registration and publication. Amendment of standards and preparation of documents for their abolition
R 070-2017: Recommendations on the effective use of locking devices available on the domestic market when organizing the protection of property of citizens and organizations
R 2.1.10.1920-04: Human Health Risk Assessment from Environmental Chemicals
R 2.2.1766-03: Guidelines on occupational risk assessment for workers' health. Organizational and methodological aspects, principles and criteria
R 3.1.3013-12: Guidance for drafting a document confirming the safety of a biologically hazardous facility
R 50.1.044-2003: Recommendations for the development of technical regulations IUS 9-2003, IUS 2-2003
R 50.1.046-2003: Recommendations regarding the selection of forms and schemes of obligatory conformity assessment of products during development of technical regulations. Bulletin 12'2003
R 50.1.051-2010: GOST R Certification System. Quality system register. Procedure of productions certification
R 50.1.057-2006: Acquisition, storage, maintenance and accounting of documents of the Federal Information Fund of technical regulations and standards and the procedure for providing users with information products and services. Main provisions
R 50.1.064-2008: Recommendations for determining the complexity of work on assessing the possibility of accreditation of certification bodies and testing laboratories and inspection control over their activities
R 50.1.065-2008: Standardization in the Russian Federation. Model clause on technical standardization committees
R 50.1.066-2009: Assessment of risk degree of harm caused by low-voltage equipment
R 50.1.068-2009: Risk Management. Guide on implementation. Part 1. Scope and application
R 50.1.069-2009: Risk Management. Guide on implementation. Part 2. Determination of risk management process
R 50.1.070-2009: Risk management. Guide on implementation. Part 3. Communication and consultations
R 50.1.071-2010: Nanotechnologies. Principles, objects of standardization and types of documents in the field of standardization of nanotechnologies, nanomaterials and products of nanoindustry
R 50.1.072-2010: Statistical methods. Examples of application. Part 1. Grouping of data
R 50.1.073-2010: Statistical methods. Examples of application. Part 2. Data analysis for compliance to requirements
R 50.1.074-2010: Statistical methods. Examples of application. Part 3. The analysis of data of the inspection
R 50.1.075-2011: Development of Standards on Terms and Definitions
R 50.1.076-2011: Organization management. Customer service methods
R 50.1.077-2011: Information technologies. Free software. Rules for use
R 50.1.078-2011: Rules for deciding whether products comply with technical regulations on the safety of low-voltage equipment when applying conformity assessment schemes using the quality management system and safety in the production of electrical equipment
R 50.1.080-2012: The consumer and standards. Guidance and principles for consumer participation in standards development
R 50.1.088-2013: Risk management.Guidance for risk assessment of dangers from the human factor
R 50.1.089-2014: Risk management. Use of external data sources
R 50.1.092-2014: Risk management. Risk managers qualification assessment principles
R 50.1.094-2014: Risk management. Projects risk identification, assessment and handling at the pre-investment, investment and operational stages
R 50.2.011-2005: State system for ensuring uniformity of measurements. Verification of the qualifications of testing (measuring) laboratories performing tests of substances, materials and environmental objects (in composition and physicochemical properties) by means of interlaboratory comparisons
R 50.2.044-2005: State system for ensuring the uniformity of measurements. Characteristics of optical radiation of solar simulators. Methods for measurements
R 50.2.053-2006: State system for ensuring the uniformity of measurements. Measurements of irradiance of ultraviolet radiation at the working places. Methods for measurements
R 50.2.061-2008: General criteria for the competence of certified reference material producers
R 50.2.063-2009: State system for ensuring uniformity of measurements. Petroleum gas produced at site of mineral resources. Methods of quantity determining
R 50.2.064-2009: State system for ensuring the uniformity of measurements. Spectrophotometrs for medical laboratories. Methods for verification
R 50.2.065-2009: State system for ensuring the uniformity of measurements. Opacimeter. Methods for verification
R 50.2.066-2009: State system for ensuring uniformity of measurements. Immunoassay analyzers. Method of verification
R 50.2.067-2009: State system for ensuring the uniformity of measurements. Evaluation of reference data on physical constants and materials properties. Basic statements
R 50.2.068-2009: State system for ensuring the uniformity of measurements. Measuring systems for crude oil and petroleum gas quantities. Norms of metrological characterictics
R 50.2.069-2009: State systems for ensuring the uniformity of measurements. Optical spectrum analyzers in fibre optical transmission systems. Verifacation procedure
R 50.2.070-2009: State systems for ensuring the uniformity of measurements. Attenuators in fibre optical transmission systems. Verifacation procedure
R 50.2.071-2009: State systems for ensuring the measurements. Optical reflectometers. Verifacation procedure
R 50.2.072-2009: State system for ensuring the uniformity of measurements. Water mass concentration in crude oil. Discrete measurements procedures with the use cut meter 'OXH'
R 50.2.073-2010: State system for ensuring the uniformity of measurements. The uniformity of measuring radiant intensity and irradiance in the wavelength range from 0,2 to 25,0. Methods of verification
R 50.2.074-2010: State system for ensuring the uniformity of measurements. Requirements for the competence of legal persons and individual entrepreneurs, accredited for the works on certification of measurement procedures, used in analytical control
R 50.2.075-2010: State System for ensuring the uniformity of measurements. Crude Petroleum and Petroleum Products. Laboratory Methods for Determination of Density, Relative Density and API Gravity
R 50.2.076-2010: State system for ensuring the uniformity of measurements. Density of petroleum and petroleum products. Methods of calculation. Programme and tables of calculation
R 50.2.077-2011: State system for ensuring the uniformity of measurements. Pattern evaluation of a measuring instrument for pattern approval. Software validation for protection assurance
R 50.2.079-2011: State system for ensuring the uniformity of measurements. Coordinate time-domain measurements. Terms and definitions
R 50.2.081-2011: State system for ensuring the uniformity of measurements. Reference laboratories. Fundamentals
R 50.2.096-2015: State system for ensuring the uniformity of measurements. Metrological criteria of conformity assessment of the object of technical regulation to the requirements of technical regulations and standards
R 50-601-47-2004: Recommendations on the structure, content and statement of requirements of technical regulations
R 52.24.309-2004: Organizing and secure monitoring of surface water pollution on Federal Hydrometereology and Environmental Monitoring Service web
R 78.36.017-2010: Recommendations on the choice and use of locks for protective structures
R 78.36.017-2012: On effective use of locking devices available at domestic market at arrangement of property protection of citizens and enterprises. Methodological recommendations
R 78.36.033-2013: Application monitoring and comparative analysis of testing various types of window units, blinds, security grilles and glazing. Classification, methods of installation and strengthening of the structure. Guidelines
R 78.36.034-2013: Application monitoring and comparative analysis of tests of various types of perimeter fencing (main fencing, additional fencing, preventive external and internal fencing) Classification
RD 03-21-2007: Regulations on unified system of conformity assessment on installations under the control of the federal service for ecological, technological and nuclear supervision
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 11-06-2007: Guidelines on development procedure for work execution program and schedule for hoisting machines and loading-unloading operations process chart.
RD 12-05-2007: Guidelines for the preparation and certification of inspectors on state supervision of power plants
RD 22-06-2007: Instructions on the procedure for information support of the activities of the Federal Environmental, Industrial and Nuclear Supervision Service
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 52.18.733-2010: Formation and maintenance of the collection of normative regulations
RD 52.24.309-2011: Organization and conduct of regime monitoring of the state and pollution of surface land waters
RD 52.24.309-2016: Organization and conduct of regime observations of the state and pollution of surface land waters
RD EO 1.1.2.01.0480-2009: Regulations on accreditation and audit of organizations for performance of work, provision of services for the repair of nuclear power plants of Energoatom Concern OJSC
RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.
RD EO 1.1.2.29.0952-2014: Production certification procedure
RD JeO 1.1.2.01.0094-2015: Development and implementation of technical documents. Position
RD RSK 01-2014: Regulations on the Russian Calibration System
RD SSPB-1: Requirements for certification bodies and accreditation procedures
RD SSPB-2: Requirements to testing laboratories and accreditation procedures
RD-APK 1.10.01.01-18: Guidelines for the technological design of cattle farms and complexes
RD-APK 1.10.01.02-10: Guidelines for technological design of farms and cattle complexes
RD-APK 1.10.01.03-12: Guidelines for the technological design of farms and cattle farms (farms)
RD-APK 1.10.02.01-13: Guidelines for technological design of pig farms of peasant (farmer) farms
RD-APK 1.10.02.04-12: Guidelines for technological design of pig farms and complexes
RD-APK 1.10.03.01-11: Guidelines for technological design of goat farms and complexes
RD-APK 1.10.03.02-12: Guidelines for the technological design of sheep facilities
RD-APK 1.10.04.03-13: Engineering Design Standards for Horse Raising Facilities
RD-APK 1.10.05.04-13: Guidelines for technological design of poultry enterprises
RD-APK 1.10.06.02-13: Engineering Design Standards for Fur Farms and Rabbit Farms
RD-APK 1.10.07.01-12: Methodical recommendations on the technological design of veterinary facilities for livestock, animal, poultry and peasant (farmer) farms
RD-APK 1.10.07.04-17: Guidelines for the technological design of veterinary and sanitary utilization plants
RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants
RD-APK 1.10.08.01-10: Guidelines for technological design of beekeeping objects
RD-APK 1.10.15.02-08: Guidelines for technological design of disposal systems and preparation for the use of manure and litter
RD-APK 1.10.17.01-15: Guidelines for technological design of enterprises for the production of animal feed
RD-APK 3.00.01.01-08: Procedure for Development, Style, Format, Review, Approval, and Registration of Engineering Design Standards, Industry-Specific Building Codes, and Guidelines
RD-APK 3.10.07.02-09: Guidelines for the maintenance of laboratory animals in vivariums of research institutes and educational institutions
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Regulation 414-rp: On approval of examination tickets under Section A “General Industrial Safety Requirements” of the areas of certification (knowledge testing) of heads and specialists of organizations supervised by the Federal Service for Ecological, Technological and Atomic Supervision, approved by order of the Federal Service for Ecological, Technological and Atomic Supervision of April 6, 2012 city number 233
Resolution 1010: On federal state control (supervision) in the field of production and circulation of ethyl alcohol, alcoholic and alcohol-containing products
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
Resolution 1101: On the approval of the Regulations on federal state control (supervision) in the field of road safety and the invalidation of some acts of the Government of the Russian Federation and certain provisions of some acts of the Government of the Russian Federation
Resolution 1123: On Amendments to the Regulation on Federal State Control (Supervision) of Compliance with Requirements Established by Technical Regulations for Wheeled Vehicles (Chassis) and Components of Vehicles (Chassis) in Circulation (Before Operation), Motor Gasoline, Diesel Fuel, Marine Fuel and Fuel Oil, or Mandatory Requirements to be Applied Before the Effective Date of Technical Regulations in accordance with the Federal Law "On Technical Regulation", for Electric
Resolution 1265: On approval of the Rules for mandatory confirmation of conformity of products specified in paragraph one of clause 3 of Article 46 of the Federal Law "On Technical Regulation"
Resolution 1384: Rules for the creation and maintenance of a register of issued conformity certificates for products included in the unified list of products subject to mandatory certification, except for conformity certificates for products subject to the requirements related to ensuring the safety in the use of atomic energy
Resolution 145: Regulations on the organization and conduct of state expertise of project documentation and engineering survey results
Resolution 1661: On licensing the operation of explosive and fire hazardous and chemically hazardous production facilities of I, II and III hazard classes (as amended on June 30, 2021)
Resolution 1856: On the procedure for the formation and maintenance of a unified register of certificates of conformity, the provision of information contained in the specified register and payment for the provision of such information
Resolution 1923: Concerning the Procedure for the Formation and Keeping of a Unified Register of Expert Auditors
Resolution 2080: On the procedure for confirming the competence of expert auditors and requirements for expert auditors
Resolution 2150-PP: On approval of Moscow city planning standards in the field of healthcare
Resolution 2151-PP: On approval of the norms of urban planning of the city of Moscow in the field of education
Resolution 2152-PP: On approval of norms of town-planning design of the city of Moscow in the field of trade, service and provision of comfortable and favorable living conditions of citizens in the objects of residential purpose
Resolution 2192: On approval of the Rules of interaction between state control (supervision) bodies, as well as state control (supervision) bodies and the national accreditation body on the implementation of state control (supervision) over compliance with the requirements of technical regulations
Resolution 2272: On Amending Certain Acts of the Government of the Russian Federation
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
Resolution 353: On the peculiarities of permissive activities in the Russian Federation in 2022
Resolution 353: Rules for the provision of wire broadcasting communication services
Resolution 412: Regulations on Federal State Supervision of Consumer Rights Protection
Resolution 532: List of communications equipment subject to mandatory certification
Resolution 581: Regulations on licensing the development, production, testing, installation, assembly, maintenance, repair, disposal and sale of weapons and military equipment
Resolution 611-PP: Administrative Regulations of the Committee of State Construction Supervision of Moscow of the state function to carry out state construction supervision
Resolution 702: Rules for Establishing by Federal Executive Bodies the Reasons for Violating the Legislation on Urban Planning Activities
Resolution 934: On approval of the Rules for the adoption by the national accreditation body of a decision to invalidate documents issued by accredited testing laboratories as a result of their activities
Resolution 936: On the procedure for registration, suspension, renewal and termination of the declaration of conformity, invalidating them and the procedure for suspending, renewing and terminating the validity of certificates of conformity, invalidating them
Resolution 993: On the approval of the Regulations on federal state control (supervision) over compliance with the requirements established by technical regulations in relation to wheeled vehicles (chassis) and components of vehicles (chassis) in circulation (before the start of their operation), motor gasoline, diesel fuel, marine fuel and fuel oil, or mandatory requirements to be applied before the date of entry into force of technical regulations in accordance with the Federal Law "On Technical Regulation", in relation to electrical energy in general-purpose electrical networks of alternating three-phase and single-phase current with a frequency of 50 Hz
RMD 11-08-2009 SPb: Guidelines for preparation of capital construction projects in St. Petersburg City
RMD 11-08-2009 St. Petersburg: Guide to the design preparation of capital construction in St. Petersburg
RMD 11-22-2013 Sankt-Peterburg: Guide to project preparation of capital construction in St. Petersburg
RMD 12-21-2013 Sankt-Peterburg: Typical temporary means of fencing, arranging and decorating construction sites
RMD 23-27-2017 Sankt-Peterburg: Recommendations for normalizing the temperature and humidity conditions of unheated attic spaces
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG
R-NP SRO SSK 02-2015: Recommendations for concrete works in winter period
SanPiN 2.6.1.2368-08: Hygienic requirements for ensuring radiation safety during radiation therapy using open radionuclide sources
SDA 01-2009: General requirements for accreditation of conformity assessment bodies
SDA 02-2009: Regulations on the Supervisory Board
SDA 03-2009: Requirements for accreditation experts
SDA 04-2009: Regulations on the Accreditation Commission
SDA 05-2009: Regulations on the Appeals Commission
SDA 07-2009: Statue of technical committees
SDA 08-2009: Requirements for technical specialists
SDA 09-2009: Regulations on the Accreditation Body
SDA 10-2009: Regulation on Territorial Authorized Body
SDA 11-2009: Requirements for expert organizations
SDA 12-2009: Rules for assessment (certification) of experts
SDA 13-2009: Requirements for independent bodies for staff certification
SDA 14-2009: Requirements for independent bodies for experts certification
SDA 15-2009: Requirements to testings laboratories
SDA 16-2009: Requirements for independent attestation and methodical center
SDA 17-2009: Requirements to inspection organisations
SDA 24-2009: Rules for assessment (certification) of testing laboratories personnel
SDA 25-2009: Requirements for certification experts and procedure for their certification (certification)
SDA 29-2011: Requirements for expert organizations in the field of energy security
SDA-18-2009: Requirements for organizations operating in the field of industrial, environmental safety, safety in the energy sector and construction
SDA-20-2010: Guidance on the application of the standard GOST R ISO / IEC 17021-2008
SDA-23-2009: Requirements for experts on industrial safety, safety in construction and inspection control
SDAE 01-2010: General requirements for certification of electrical laboratories and laboratories of thermal measurements
SNiP 31-05-2003: Public office buildings
SO 153-34.20.121-2006: Standards of technological design of overhead power lines with voltage of 35 - 750 kV
SO 153-34.20.122-2006: Standards for technological design of AC substations with the highest voltage of 35-750 kV
SP 1.13130.2009: The systems of fire protection. Evacuation ways and exits
SP 10.13130.2009: Systems of fire protection. Fire line inside. Fire safety requirements
SP 100.13330.2016: The reclamation systems and construction
SP 101.13330.2012: Retaining walls, navigation locks, fish passing and fish protection facilities
SP 102.13330.2012: Hydraulic tunnels
SP 103.13330.2012: Protection of mines against ground or surface water
SP 104.13330.2016: Ground protection from flooding and underflooding
SP 105.13330.2012: Buildings and premises for keeping and treating agricultural production
SP 106.13330.2012: Livestock, poultry and animal-breeding buildings and facilities
SP 107.13330.2012: Greenhouses and hotbeds
SP 108.13330.2012: Plants, buildings and constructions of storage and grain processing
SP 109.13330.2012: Cold storage units
SP 11.13130.2009: Location of fire service divisions. Procedure and methods of determination
SP 113.13330.2012: Parkings
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 119.13330.2012: Railways of 1520 mm
SP 12.13130.2009: Determination of categories of rooms, buildings and external installations for explosion and fire hazards
SP 120.13330.2012: Subway systems
SP 121.13330.2012: Aerodromes
SP 121.13330.2019: Airdromes
SP 122.13330.2012: Railway and highway tunnels
SP 123.13330.2012: Underground storages of natural gas, oil and processing product
SP 124.13330.2012: Heating networks
SP 125.13330.2012: Petroleum product pipelines laid through cities and public areas
SP 126.13330.2012: Survey operations in construction
SP 128.13330.2012: Aluminium structures
SP 13.13130.2009: Nuclear power plants. Fire safety requirements.
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 131.13330.2012: Building climatology
SP 131.13330.2018: Construction Climatology
SP 132.13330.2011: Anti-terrorist protection of buildings and constructions. General requirements.
SP 133.13330.2012: Networks of wire broadcasting and anouncements in buildings and facilities. Design norms
SP 134.13330.2012: Telecommunication systems of buildings and facilities. Design basic provisions
SP 135.13130.2012: Heliports. Fire safety requirements
SP 136.13330.2012: Buildings and structures. Common design regulations of accessibility for physically handicapped persons
SP 137.13330.2012: Residential environment with planning components, accessible for physicapped persons. Design rules
SP 138.13330.2012: Public buildings and structures accessible for physically handicapped visitors. Rules of architectural design
SP 139.13330.2012: Buildings and premises with working places for disebled rules of architectural design
SP 14.13330.2011: Construction in seismic regions.
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 14.13330.2018: Seismic building design code
SP 140.13330.2012: Urban environment. Design rules for people with limited mobility
SP 141.13330.2012: Social service institutions persons with reduced mobility regulations of calculation and allocation
SP 142.13330.2012: The buildings of social service centers. Rules of architectural design
SP 143.13330.2012: Rooms for leisure and sports and improving activity of low-mobile groups of the population. Rules of architectural design
SP 145.13330.2012: Boarding-Houses. Rules of architectural design
SP 146.13330.2012: Gerontological centres, nursing homes, hospices. Design rules
SP 147.13330.2012: Buildings for establishments of social service. Rules for reconstruction
SP 148.13330.2012: Rooms in establishments social and medical service. Design rules
SP 149.13330.2012: Reabilitation center for children and teenagers with limited possibilities rules of architectural design
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 150.13330.2012: Boarding schools (institutions) for disabled children. Rules of architectural design
SP 151.13330.2012: Engineering site investigations for nuclear power plants construction
SP 152.13330.2012: Buildings of common jurisdiction courts. Rules of architectural design
SP 154.13130.2013: Embedded underground parkings. Fire safety requirements
SP 157.1328500.2014: Rules for technological design of refineries and petrochemical complexes
SP 158.13330.2014: Buildings and rooms for health care facilities. Design rules
SP 16.13330.2011: Steel structures
SP 161.1326000.2014: Railway Telecommunications. Terms of use of train radio communication
SP 162.1330610.2014: Safety requirements for production, storage, transportation and use of liquid hydrogen
SP 163.1325800.2014: The designs with application of gypsum plasterboards and gypsum fiber sheets. Terms of design and installation
SP 164.1325800.2014: Strengthening of reinforced concrete structures by FRP composites. Rules for design
SP 165.1325800.2014: Engineering and technical measures of civil defense
SP 166.1311500.2014: City road tunnels and tunnel-tape flyovers with length of covered part not more than 300 meters. Fire safety requirements
SP 17.13330.2011: Roofs
SP 18.13330.2011: Master plans for industrial enterprises
SP 18.13330.2019: Production facilities. Planning organization of the land plot (Master plans of industrial enterprises) SNiP II-89-80 *
SP 19.13330.2011: Master plans for farming enterprises
SP 2.13130.2009: Systems of fire protection. Fire-resistance security of protecting units
SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)
SP 20.13330.2011: Loads and impacts
SP 20.13330.2016: Loads and actions
SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils
SP 22.13330.2011: Buildings and structures foundations
SP 225.1326000.2014: Station buildings, structures and devices
SP 228.1325800.2014: Buildings and structures of the investigative bodies. Rules of architectures design
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 23.13330.2011: Foundation of hydraulic structures
SP 23.13330.2018: Foundations of hydraulic structures
SP 231.1311500.2015: Arrangement oil and gas fields. Fire safety requirements
SP 232.1311500.2015: Fire service companies. General requirements
SP 236.1326000.2015: Acceptance and commissioning of railway transport infrastructure
SP 237.1326000.2015: Rail transport infrastructure. General requirements
SP 239.1326000.2015: Systems of informing, annunciator and park communication on railway transport
SP 24.13330.2011: Pile foundations
SP 240.1311500.2015: Storages of liquefied natural gas. Fire safety requirements
SP 241.1311500.2015: Fire protection systems. Automatic water extinguishing systems for high rack storages. Designing and regulations rules
SP 243.1326000.2015: Design and construction of low-volume roads
SP 245.1325800.2015: Corrosion protection of communication and utility lines and structures in the oil and gas industry. Production and work acceptance rules
SP 246.1325800.2016: Code practice. Regulation on the supervision of authors for construction of buildings and structures
SP 246.1325800.2023: Regulations on author's supervision during construction, reconstruction and capital repair of capital construction facilities
SP 247.1325800.2016: Penal system. Pretrial detention facilities. Design rules
SP 248.1325800.2016: Underground structures. Design rules
SP 248.1325800.2023: Underground structures. Design rules
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 250.1325800.2016: Building and structures. Protection against groundwater
SP 252.1325800.2016: Preschool educational institution buildings. Design rules
SP 254.1325800.2016: Buildings and territories. Rules for designing of industrial sound protection
SP 26.13330.2012: Foundations for machines with dynamic loads
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 260.1325800.2023: Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules
SP 261.1325800.2016: Industrial railroad. Rules of engineering and construction
SP 264.1325800.2016: Light masking settlements and objects of national economy
SP 266.1325800.2016: Composite steel and concrete structures. Design rules
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 268.1325800.2016: Transport structures in seismic zones. Specifications for earthquake-resistant design
SP 269.1325800.2016: Transport structures in seismic zones. Rules for initial seismity detailing and seismic microzoning
SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures
SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures
SP 270.1325800.2016: Transport facilities in seismic area. Rules for evaluation of highway and railway structures seismic damages in far and inaccessible zones
SP 271.1325800.2016: Noise reduction system of air heating, ventilating and air conditioning. Rules of design
SP 275.1325800.2016: Construction fencing of residential and public buildings. Rules of sound insulation design
SP 276.1325800.2016: Buildings and territories. Protection design rules from traffic noise
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 28.13330.2017: Protection against corrosion of construction
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 288.1325800.2016: Forest roads. Rules of design and construction
SP 29.13330.2011: Floors
SP 290.1325800.2016: Water passageways hydraulic structures (discharge sluices, emptying and dewatering conduits). Rules of projecting
SP 291.1325800.2017: Armed grouted structures. Rules of architectural design
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules
SP 296.1325800.2017: Buildings and structures. Accidental actions
SP 297.1325800.2017: Fiber reinforced concrete structures and precast products with non-steel fibers. Design rules
SP 298.1325800.2017: Ventilation systems of highway tunnels. Design rules
SP 3.13130.2009: Systems of fire protection. System of annunciation and management of human evacuation at fire. Requirements of fire safety
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 30.13330.2016: Domestic water supply and drainage systems in buildings
SP 300.1325800.2017: Systems of jet ventilation of underground and covered parkings. Rules of design
SP 301.1325800.2017: Building information modeling. Rules for the organization of work by the production and technical departments
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*
SP 311.1325800.2017: High strength concrete and reinforced high strength concrete structures. Design guidline
SP 312.1325800.2017: Internal roads of rural settlements. Service regulation
SP 313.1325800.2017: Roads in eternal permafrost regions. Rules of design and construction
SP 314.1325800.2017: Tracks overland rail cranes. Design, arrangement and exploitation
SP 317.1325800.2017: Engineering geodetic survey for construction. General regulations for execution of work
SP 318.1325800.2017: Forest roads. Service regulation
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 32.13330.2018: Sewerage. Outdoor networks and facilities
SP 321.1325800.2017: Residential and public buildings. Regulations for designing of protection against radon
SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling
SP 327.1325800.2017: Exterior masonry walls with brick veneer. Rules of design, operation and repair
SP 33.13330.2012: Steel pipelines strength analysis
SP 331.1325800.2017: Building information modeling. Modeling guidelines and requirements of exchange data between building information models and application package models
SP 335.1325800.2017: Large-panel construction system. Design rules
SP 336.1325800.2017: Ventilation and conditioning systems. Operating rules
SP 337.1325800.2017: Composite precast and in-situ reinforced concrete construction. Design rules
SP 339.1325800.2017: Designs from cellular concrete. Rules of design
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 344.1325800.2017: The water supply and heating interior buildings systems cross-linked polyethylene pipes. The rules of design and installation
SP 346.1325800.2017: Systems of gas air treatments of boiler installations 150 Mw. Rules of design
SP 347.1325800.2017: Internal heating, hot and cold water systems. Rules of operation
SP 348.1325800.2017: Industrial parks and industrial clusters. Design rules
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 350.1326000.2018: Norms for technological design of sea ports
SP 351.1325800.2017: Concrete and reinforced concrete designs from light concrete. Rules of design
SP 352.1325800.2017: Single-family houses with wooden frame. Rules of design and construction
SP 353.1325800.2017: Noise protection of metro units. Regulations for designing, construction and operation
SP 354.1325800.2017: Foundations of bridge supports in areas of permafrost soils. Design and construction rules
SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design
SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design
SP 358.1325800.2017: Hydraulic structures. Rules of design and construction in seismic-prone regions
SP 36.13330.2012: Trunk pipelines
SP 360.1325800.2017: Steel fiber reinforced concrete structures. Design rules
SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects
SP 362.1325800.2017: Fencing structures made of sandwich panels. Design rules
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 37.13330.2012: Industrial transport
SP 370.1325800.2017: Solar Shading Devices in Buildings. Design rules
SP 372.1325800.2018: Multicompartment residential buildings. Operation rules
SP 375.1325800.2017: Industrial chimneys. Design rules
SP 375.1325800.2023: Industrial flue pipes. Design rules
SP 376.1325800.2017: Residential buildings and facilities for temporary accommodation. Design rules
SP 377.1325800.2017: Buildings in the ports. The rules of exploitation
SP 378.1325800.2017: Offshore pipelines. Design and construction rules
SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)
SP 38.13330.2018: Loads and impacts on hydraulic structures (wave, ice and from ships)
SP 381.1325800.2018: Retaining structures. Design rules
SP 383.1325800.2018: Facilities for sports and health. Desing rules
SP 384.1325800.2018: Tent structures. Design rules
SP 385.1325800.2018: Protection of buildings and structures against progressive collapse. Design code. Basic statements
SP 386.1325800.2018: Light transparent polycarbonate structures. Design rules
SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements
SP 389.1326000.2018: Technical operation of seaport infrastructure facilities
SP 39.13330.2012: Rock fill dams
SP 390.1325800.2018: Buildings and facilities of sports-adaptive schools and centers of adaptive sports. Design rules
SP 395.1325800.2018: Transport hubs. Design rules
SP 397.1325800.2018: Buildings and facilities of equestrian complexes. Design rules
SP 398.1325800.2018: Quays. Urban Planning Rules
SP 4.13130.2009: Fire containment at protected facilities. Requirements to spatial planning and structural solutions
SP 4.13130.2013: Systems of fire protection. Restriction of fire spread at object of defense. Requirements to special layout and structural decisions
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 405.1325800.2018: Concrete structures with non-metallic fiber and polymer reinforcement. Design rules
SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
SP 410.1325800.2018: Pipelines trunk and field for oil and gas. Permafrost construction and work control
SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities
SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules
SP 413.1325800.2018: Buildings and structures subject to dynamic effects. Design rules
SP 415.1325800.2018: Public buildings. Acoustic Design Rules
SP 415.1325800.2023: Public buildings. Rules of acoustic design
SP 42.13330.2011: Urban development. Urban and rural planning and development
SP 420.1325800.2018: Engineering surveys for construction in areas of landslide development. General requirements
SP 421.1325800.2018: Reclamation systems and facilities. Terms of Use
SP 423.1325800.2018: Electrical installations low-voltage buildings and structures. Explosion hazard design guidelines
SP 425.1325800.2018: Engineering protection of territories from erosion processes. Design rules
SP 427.1325800.2018: Stone and armored constructions. Amplification methods
SP 428.1325800.2018: Engineering surveys for construction in avalanche hazardous areas. General requirements
SP 429.1325800.2018: Enclosing constructions with effective insulation and sheet cladding. Design rules
SP 43.13330.2012: Structures for industrial installations
SP 430.1325800.2018: Monolithic structural systems. Design rules
SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone
SP 432.1325800.2019: Fireproof coatings. Condition Monitoring
SP 433.1325800.2019: Fire protection of steel structures. Work Rules
SP 436.1325800.2018: Engineering protection of territories, buildings and structures from landslides and landslides. Design rules
SP 437.1325800.2018: Electrical installations low-voltage buildings and structures. Design Rules for Electric Shock Protection
SP 438.1325800.2019: Engineering surveys in the planning of territories. General requirements
SP 44.13330.2011: Administrative and residential buildings
SP 441.1325800.2019: Protection of buildings against vibration generated by rail. Design rules
SP 444.1326000.2019: Standards for designing sea channels, fairways and maneuvering areas
SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules
SP 445.1325800.2023: Culverts and drainage systems in permafrost areas. Design rules
SP 446.1325800.2019: Engineering and geological surveys for construction. General rules for the production of work
SP 447.1325800.2019: Railways in permafrost areas. Design Fundamentals
SP 448.1325800.2019: Engineering surveys for construction in areas of subsidence. General requirements
SP 449.1326000.2019: Engineering surveys for construction in areas of swelling soil distribution. General requirements
SP 45.13330.2012: Earth structures, bases and foundations
SP 450.1325800.2019: Agro-industrial clusters. Design rules
SP 454.1325800.2019: Residential multi-apartment buildings. Rules for assessing emergency and limited working technical condition
SP 457.1325800.2019: Sports facilities for cycling. Design rules
SP 457.1325800.2019: Sports facilities for cycling. Design rules
SP 459.1325800.2019: Sports facilities for rowing sports. Design rules
SP 46.13330.2012: Bridges and pipes
SP 465.1325800.2019: Buildings and constructions. Subway vibration protection. Design rules
SP 466.1325800.2019: Mercenary houses. Design rules
SP 466.1325800.2019: Mercenary houses. Design rules
SP 47.13330.2012: Engineering survey for construction. Basic principles
SP 47.13330.2016: Engineering survey for construction. Basic principles
SP 470.1325800.2019: Steel structures. Work Rules
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
SP 475.1325800.2020: Parks. The rules of urban planning and landscaping
SP 476.1325800.2020: Territories of urban and rural settlements. Rules for the planning, development and improvement of residential neighborhoods
SP 479.1325800.2019: Engineering surveys for construction in areas where mudflow processes develop. General requirements
SP 48.13330.2011: Organization of construction
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 484.1311500.2020: Fire protection systems. Fire alarm systems and automation of fire protection systems. Norms and rules of design
SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 506.1311500.2021: Parking lots. Fire safety requirements
SP 51.13330.2011: Noise protection and rooms acoustics.
SP 511.1325800.2022: Landing sites. Design rules
SP 52.13330.2011: Natural and artificial lighting
SP 52.13330.2016: Daylighting and artificial lighting
SP 53.13330.2011: Planning and development of territories of horticultural (suburban) associations of citizens, buildings and structures
SP 54.13330.2011: Multicompartment residential buldings
SP 55.13330.2011: Sindle-family houses
SP 56.13330.2011: Industrial buildings
SP 56.13330.2021: Industrial buildings SNiP 31-03-2001
SP 58.13330.2012: Hydraulic Structures. Basic statements
SP 59.13330.2012: Accessibility of buildings and structures for persons with disabilities and persons with reduced mobility
SP 59.13330.2016: Accessibility of buildings and structures for persons with reduced mobility
SP 59.13330.2020: Accessibility of buildings and structures for people with limited mobility SNiP 35-01-2001
SP 6.13130.2009: Systems of fire protection. Electrical equipment. Requirements of fire safety
SP 6.13130.2013: Systems of fire protection. Electrical equipment. Requirements of fire safety
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
SP 60.13330.2016: Heating, ventilation and air conditioning
SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points
SP 64.13330.2011: Wooden structures.
SP 68.13330.2017: Acceptance into operation completed construction objects. Basic provisions
SP 7.13130.2009: Heating, ventilation and air-conditioning. Fire safety requirements
SP 7.13130.2013: Heating, ventilation and air conditioning. Fire Safety Requirements
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 71.13330.2017: Insulation and finish coatings
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
SP 73.13330.2012: Internal sanitary-technical systems
SP 74.13330.2023: Heat networks.
SP 77.13330.2016: Systems of automation.
SP 78.13330.2012: Automobile roads
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
SP 8.13130.2009: Systems of fire protection. Sources of external fire protection. Water supply. Fire safety requirements
SP 80.13330.2016: River hydraulie engineering facilities
SP 81.13330.2017: The reclamation systems and construction
SP 83.13330.2016: Industrial furnaces and brick chimneys
SP 84.13330.2016: Tramways
SP 85.13330.2016: Overhead contact lines of electrified transport
SP 86.13330.2012: Main pipelines
SP 86.13330.2014: Main (Trunk) pipelines
SP 89.13330.2012: Combustion boiler systems of heating generation
SP 9.13130.2009: Fire Engineering. Fire extinguishers. Requirements to Operation
SP 90.13330.2012: Thermal power stations
SP 91.13330.2012: Underground mine workings
SP 92.13330.2012: Warehouses of dry mineral hestilizers and chamical means of protection plants
SP 94.13330.2016: Facilities public utility for sanitary processing of people, special treatment of clothing and rolling stock vehicles
SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete
SP 96.13330.2016: Ferrocement structures
SP 97.13330.2016: Asbestos-cement constructions
SP 98.13330.2012: Tram and trolleybus lines
SP 98.13330.2018: Tram and trolley lines
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
SRP 2007: Set of Restoration Rules. Recommendations for research, survey, design and production works aimed at preserving cultural heritage sites (historical and cultural monuments) of the peoples of the Russian Federation
ST-NP SRO SSK-02-2013: Evaluation of the energy performance of buildings. Monitoring compliance with the requirements of thermal protection of external building envelopes
ST-NP SRO SSK-03-2013: Rules for monitoring and assessing the strength of concrete in monolithic structures
ST-NP SRO SSK-04-2013: Temperature-strength control of concrete during the construction of monolithic structures in the winter
ST-NP SRO SSK-05-2013: Organization and implementation of construction, reconstruction, overhaul of capital construction objects
STO: Thermal power plants. Methods of assessing the condition of the main equipment
STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)
STO 275: Thermal and hydraulic plants. Methods for assessing the quality of repair of power equipment. Main provisions.
STO 64235108-005-2016: Support rings OK. General requirements
STO 64235108-008-2016: Easily removable KL covers. General requirements
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
STO 95 12008-2017: Objects of use of atomic energy. Construction of nuclear power plants. Requirements for handling executive documentation
STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality
STO DOKTOR BETON 68686983-004-2014: Dry building mixtures trade mark "ДОКТОР БЕ��ОН®" for waterproofing and repair concrete construction.
STO ROSTEHEKSPERTIZA 10.001-2009: Thermal networks. Norms and methods of strength calculation
STO SA 03.003-2009: Vessels and apparatus. Norms and methods of strength calculation. Calculation of seismic effects
STO SSK 02-2016: Assessment of the energy efficiency of buildings during construction. Monitoring compliance with the requirements of thermal protection of external building envelopes and specific annual consumption of thermal energy
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
STP 52.26.001-2012: The ionosphere of the earth. Terms and Definitions
STP 52.26.001-2012: The ionosphere of the earth. Terms and Definitions
TGN 34.21-301-2008: Lightning protection of buildings, structures, outdoor areas and industrial communications systems with pre-emptive streamer emission. Technical requirements. Design, device technology and technical operation
TR 183-07: Technical recommendations for roofing with the use of roll roofing material Shungomast
TR 187-07: Technical recommendations on roofing and waterproofing with the use of new waterproofing materials Filizol-Breeze and Filizol-NG
TR 198-08: Technical recommendations for flat roofing of residential, public and industrial buildings using rolled bitumen, bitumen-polymer and polymer materials
TR 204-09: Technical recommendations for conducting a risk analysis of terrorist acts and zoning of high-rise and unique objects
TR 205-09: Technical recommendations on the design of anti-terrorism security systems and integrated security of high-rise and unique buildings
TSN 12-321-2003: Acceptance and commissioning of completed construction projects. Rostov region
TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards
VMR 2.1.3.2365-08: Temporary recommended practice for the placement, arrangement and equipment of centers of high medical technologies
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.