TSN 23-344-2003
ТСН 23-344-2003
|
|
Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Altai Republic
Энергетическая эффективность жилых и общественных зданий. Нормативы по энергопотреблению и теплозащите. Республика Алтай
Status: Effective
Norms must be observed in the territory of the Altai Republic when designing new, reconstructed, overhaulable heated residential buildings (multi-apartment and single-apartment) and public buildings (pre-school, educational, medical institutions and clinics, educational, entertainment, trade, public catering and consumer services, administrative and sports), as well as other public buildings with standardized parameters of the indoor air of premises or buildings.
Нормы должны соблюдаться на территории Республики Алтай при проектировании новых, реконструируемых, капитально ремонтируемых отапливаемых жилых зданий (многоквартирных и одноквартирных) и зданий общественного назначения (дошкольных, общеобразовательных, лечебных учреждений и поликлиник, учебных, зрелищных, учреждений торговли, общественного питания и бытового обслуживания, административно-бытовых и спортивных), а также других зданий общественного назначения с нормируемыми параметрами внутреннего воздуха помещений или зданий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Industry, Construction, Housing and Communal Services of the Republic of Altai,
1/1/2003
SKU: RUSS374896
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document References:
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 23250-78: Building materials. Method of specific heat determination
GOST 24816-81: Building materials. Method of hygroscopic moisture determination
GOST 25380-82: Buildings and structures. Method of measuring density of heat flows passing through enclosure structures
GOST 25609-83: Soft and tile materials for floor covering. Procedure for determining the heat absorption value
GOST 25891-83: Buildings and structures. Methods of determination of air tightness of enclosing structures
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 26253-84: Buildings and structures. Method for determining the building structure ability to maintain a relatively constant temperature of its inside surface under cycling thermal influence
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe
GOST 30290-94: Building materials and products. Surface converter method of thermal conductivity determination
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 7025-91: Ceramic and calcium silicate bricks and stones. Methods for water absorption and density determination and frost resistance control
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles
GOST R 1.5-92: State system for standardization of the Russian Federation. General requirements for lay-out, formulation, presentation and contents of standards
RDS 10-231-93*: GOST R. certification system. The main provisions of certification of products in construction
RDS 10-232-94: GOST R. certification system. Procedure for certification of products in construction
SanPiN 2.1.2.1002-00: Sanitation and Disease Control Requirements for Residential Occupancies and Spaces
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 31-02-2001: Residental single-family houses
SP 12-101-98: Technical rules for manufacture of the outdoor thermal insulation of buildings with fine plaster on the insulant
SP 23-101-2000: Design of thermal performance of buildings
TSN 23-325-2001: Energy efficiency of residential and public buildings. Energy-saving thermal protection of buildings. Design Standards. Altai region
TSN 23-336-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Kemerovo region
VSN 58-88(r): Ordinance for Rehabilitation, Renovation, and Technical Inspection of Residential Occupancies, Public Utility Facilities, and Facilities Used for Amusement, Entertainment, and Recreation
VSN 61-89(r): Rehabilitation and Renovation of Residential Occupancies. Design Standards
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
