Manual for SNiP 3.06.03-85
Пособие к СНиП 3.06.03-85
|
|
Manual for surface treatment on roads
Пособие по устройству поверхностных обработок на автомобильных дорогах
Status: Reference materials, MP, TPR
The manual outlines the basic concepts of road emulsions, gives their classification, methods of preparation; provides information about emulsifiers, machines and mechanisms for the preparation of emulsions, safety rules for the preparation of emulsions.
В Пособии изложены основные понятия о дорожных эмульсиях, дана их классификация, способы приготовления; приведены сведения об эмульгаторах, машинах и механизмах для приготовления эмульсий, правила техники безопасности при приготовлении эмульсий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Alliances,
3/25/1987
SKU: RUSS374970
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of roads »
20. Organization of construction »
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.3 Asphalt pavements (and others using bitumen, tar and mastic gum) »
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.5 Coatings and bases of stabilized soil and materials. Use of industrial waste in road construction »
Construction (Max) »
Reference documents »
Reference guidelines to SNiP »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.50 Binders. Compactors »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.10 Road construction »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.120 Airport construction »
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10260-82: Crushed stone gravel for construction works. Specification
GOST 10564-75: Synthetic latex CKC-65 ГП. Specifications
GOST 10585-75: Black oil fuel
GOST 10834-76: Hydrophobizing liquid 136-41. Specifications
GOST 11022-95: Solid mineral fuels. Methods for determination of ash
GOST 11311-76: Coal phenol. Specifications
GOST 11362-76: Petroleum products. Determination of base, acid and acidity by potentiometric titration
GOST 11501-78: Petroleum bitumen. Method for determination of depth of penetrometer needle penetration
GOST 11503-74: Petroleum bitumen. Method for the determination of viscosity
GOST 11504-73: Petroleum bitumen. Method for determination of diluent quality vaporized from liquid bitumen
GOST 11505-75: Petroleum bitumen. Method for determination of ductility
GOST 11506-73: Petroleum bitumen. The method of the determination of softening point by ring and ball
GOST 11507-78: Petroleum bitumen. Method for determination of brittle point
GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand
GOST 11512-65: Petroleum bitumen. Method for determination of ash content
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12071-84: Soils. Sampling, packing, transportation and keeping of samples
GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 127-76: Specifications For Industrial Sulfur
GOST 12784-78: Mineral powder for asphaltic mixtures. Methods of tests.
GOST 12801-84: Asphaltic concrete mixtures for roads and airdromes, tar concrete mixtures for roads, asphaltic concrete and tar concrete. Methods of testing
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 13302-77: Petroleum acids
GOST 13493-86: Sodium tripolyphosphate. Technical conditions
GOST 13830-97: Food common salt. General specifications
GOST 14231-78: Urea-formaldehyde resins. Specifications
GOST 14231-88: Urea-formaldehyde resins. Specifications
GOST 16306-80: Granulated double
GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements
GOST 1667-68: Motor fuel for medium- and low-speed diesel engines
GOST 17362-71: Mineral oils. Method of determination of saponification number
GOST 18659-81: Bitumen road emulsions. Technical requirements
GOST 21749-76: Petroleum products. The method for determination of saponification value and free fats content
GOST 2210-73: Ammonium chloride technical. Technical conditions
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 22266-76: Sulphate resisting cements. Specifications
GOST 2263-79: Sodium hydroxide for industrial use. Specifications
GOST 22688-77: Lime for building purposes. Test methods
GOST 22733-77: Soils. A laboratory method for determining maximum density
GOST 23239-89: Synthetic fat acids C5-C6, C7-C9, C5-C9, C10-C13, C10-C16, C17-C20 fractions. Specifications
GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
GOST 23735-79: Sandy-gravel mixtures for construction work. Specifications
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 25100-82: Soils. Classifications
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 305-82: Diesel fuel. Specifications
GOST 310.1-76: Cements. Test methods
GOST 310.2-76: Cements. Methods of grinding fineness determination
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications
GOST 3476-74: Slags domain and electrothermophosphoric granulated for the production of cements
GOST 3769-78: Reagents. Ammonium sulphate. Specifications
GOST 4013-82: Gypsum and gypsum-anhydrite rock for the manufacture of binders. Specifications
GOST 4142-77: Reagents. Calcium nitrate tetrahydrate. Specifications
GOST 4147-74: Reagents. Ferric chloride hexahydrate. Specifications
GOST 4148-78: Reagents. Ferrous (II) sulphate 7-aqueous. Specifications
GOST 4201-79: Reagents. Sodium bicarbonate. Specifications
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 4641-80: Сoal tars for road constructions
GOST 4806-79: Shale oil fuel. Specifications
GOST 5180-84: Soils. Laboratory methods for determination
GOST 5382-73: Cements. Chemical testing methods
GOST 6318-77: Sodium sulfate technical. Technical conditions
GOST 6968-76: Acetic acid produced
GOST 7847-73: Coal tar pitch. Method for determination of mass fraction of substances insoluble in toluene
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8268-82: Gravel for construction work
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
GOST 83-79: Reagents. Sodium carbonate. Specifications
GOST 857-95: Industrial synthetic hydrochloric acid
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-85: Sand for construction work. Technical requirements
GOST 8736-93: Sand for construction works. Specifications
GOST 9128-84: Asphaltic concrete mixtures for roads and airdromes and asphaltic concrete. Specifications
GOST 9179-77: Lime for building purposes. Specifications
SN 528-80: Specified list of physical quantity units to be used in architecture and construction
SNiP 3.06.03-85: Automobile roads
SNiP 3.06.06-88: Airports
TU 35-1669-88: Divynylstyrene-Based Bituminous Polymer Binders and Polymer Asphalt Concrete
VSN 115-75: Technical Guidelines for the Preparation and Application of Road Emulsions
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 197-83: Guidelines for the Installation of Butadiene Polymer Roll Roofing for Residential Occupancies of Series П 3/17
VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads
VSN 31-83: Execution Requirements for Concrete Work for Construction of Hydraulic Structures
VSN 37-86/Minjenergo SSSR: Rules for acceptance into operation of individual start-up complexes and completed construction of power plants, objects of electric and heating networks
VSN 46-83: Instructions for design of paved roads
The Document is Referenced By:
DND MO-004/2004: Recommendations for the selection of asphalt concretes on bituminous rubber composite binder for the upper layers of coatings and wear layers
ODM 218.2.002-2009: Guidelines for the use of modern materials in the mating pavement with the expansion joints of bridge structures
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.3.004-2010: Guidelines for the thermal profiling of asphalt concrete pavements
ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers
ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads
ODM 218.3.084-2020: Recommendations for the preparation and use of organic-mineral mixtures in the construction of structural layers of road pavements of capital and lightweight types
ODM 218.3.119-2019: Guidelines for the use of non-rigid road pavement with bases made of reinforced or knitted stone materials and soils
ODM 218.9.079-2016: Recommendations about design macrorough pavings
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
VSN 14-95: Guidelines for the Construction of Asphalt Concrete Road Pavements
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.