Manual for SNiP 2.05.07-85
Пособие к СНиП 2.05.07-85
|
|
Manual on the design of railways and roads of industrial enterprises in permafrost areas (to SNiP 2.05.07-85)
Пособие по проектированию железных и автомобильных дорог промышленных предприятий в районах вечной мерзлоты (к СНиП 2.05.07-85)
Status: Attached to an irrelevant document
The manual contains materials explaining and concretizing the norms and rules for the design of the subgrade of railway tracks of 1520 (1524 and 1535) mm gauge and roads of industrial enterprises.
Пособие содержит материалы, разъясняющие и конкретизирующие нормы и правила проектирования земляного полотна железнодорожных путей колеи 1520 (1524 и 1535) мм и автомобильных дорог промышленных предприятий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Promtransniiproekt,
1/1/1988
SKU: RUSS374993
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of roads »
23. Highways in northern regions of Siberia, Far East, Far North. Winter roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
24. Roadbed »
24.1 General documents on design and construction of roadbed »
Construction (Max) »
Reference documents »
Reference guidelines to SNiP »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.040 Continuous handling equipment »
53.040.10 Conveyors »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.040 Continuous handling equipment »
53.040.99 other continuous handling equipment »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.40 Cost of construction and maintenance of buildings and structures »
91.010.40-10 Economics of construction. Pricing. Cost analysis. Estimates »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.01 Road construction in general »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.10 Road construction »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.100 Railway construction »
The Document References:
GOST 12248-78: Soils. Laboratory methods for determination of shear strength
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 183-74: Rotating electrical machines
GOST 1839-80: Asbestos cement pipes and couplings for non-pressure pipe lines. Specifications
GOST 18900-73: Steel ropes. Cable carrier with one layer of a zeta-like wire and a core of the LC and TLC type. Range
GOST 20276-85: Soils. Field methods for determining deformation characteristics
GOST 22733-77: Soils. A laboratory method for determining maximum density
GOST 23908-79: Soils. A laboratory method for determination of volume change by oedometer test
GOST 24586-90: Soils. Laboratory methods for determining strength and strain characteristics of frozen soils
GOST 24841-81: Hard rubber. General requirements for the physical mechanical tests
GOST 25100-82: Soils. Classifications
GOST 25358-82: Soils. Field method of determining temperature
GOST 25584-83: Soils. The method of laboratory determination of the filtration factor
GOST 26008-83: cast-iron storm flow receivers for man-holes
Specifications
GOST 26262-84: Soils field methods for determining depth of thawing
GOST 2688-80: Two lay rope type ЛК-Р construction 6x19 (1+6+6/6)+1 o.c. Dimensions
GOST 3064-80: One lay rope type ТК construction 1x37 (1+6+12+18). Dimensions
GOST 3068-74: Steel ropes. Double rope of TK type 6x37 (1 + 6 + 12 + 18) + 1x37 (1 + 6 + 12 + 18). Range
GOST 3077-80: Two lay rope type ЛК-О construction 6x19 (1+9+9)+1 o.с. Dimensions
GOST 3089-80: Three lay rope type ЛК-Р construction 6x7x19 (1+6+6/6)+1 o.с. Dimensions
GOST 3090-73: Steel wire ropes. Locked conveying wire rope with one layer of Z-wire and type ТК cope. Dimensions
GOST 5180-84: Soils. Laboratory methods for determination
GOST 7392-2002: Crushed stone of solid rocks for railway ballast. Specifications
GOST 7394-85: Gravel and sandy-gravel ballast for railway track. Specifications
GOST 7668-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+1 o.с. Dimensions
GOST 7669-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions
GOST 7675-73: Steel wire ropes. Locked conveying wire rope with one layer of V-shaped wire, one layer of Z-wire and type ТК cope. Dimensions
GOST 9128-84: Asphaltic concrete mixtures for roads and airdromes and asphaltic concrete. Specifications
GOST 9238-73: Dimensions of approach of buildings and rolling stock of railways of 1520 (1524) mm gauge for lines with the speed of trains not exceeding 160 km / h
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
RSN 31-83: Standards of performance of engineering and geological surveys for buildings located on permafrost
RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex
SNiP 1.02.01-85: Instructions on the composition, procedure for the development, coordination and approval of design estimates for the construction of enterprises, buildings and structures
SNiP 1.02.07-87: Engineering Research for Construction
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.01.14-83: Determination of design hydrologic characteristics
SNiP 2.05.08-85: Aerodromes
SNiP II-18-76: Foundations and foundations on permafrost soils. Design Standards
VSN 139-80: Construction Guidelines for Cement Concrete Road Pavements
VSN 184-75: Technical guidelines for the installation of pavement bases made of stone materials, not reinforced and fortified with inorganic binders
VSN 186-75: Technical Guidelines to Railway Bed Construction Methods
VSN 197-83: Guidelines for the Installation of Butadiene Polymer Roll Roofing for Residential Occupancies of Series П 3/17
VSN 200-85: Design and construction of roadbed of the Yagelnaya-Yamburg railway line (for experimental construction)
VSN 203-85: Special norms and specifications for the design and construction of railways on the peninsula of Yamal
VSN 204-85A: Temporary instruction on the composition, procedure for the development, approval and approval of design estimates for the construction of public roads
VSN 204-86: The use of group installation of reinforced concrete weighting agents such as UBO using the ballasting ability of the soil
VSN 205-87: Design of Clay Soil Railway Roadbed Using Geotextile
VSN 46-83: Instructions for design of paved roads
VSN 61-89: Exploration, design and construction of the railways in regions of the permafrost
VSN 84-89: Motor road survey, design, and construction in permafrost areas
The Document is Referenced By:
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.086-2019: Guidelines for geocryological forecasting of the stability of road structures in the design, construction and operation of roads
ODM 218.3.038-2015: Recommendations for the design and construction of coastal road structures
SP 32-104-98: Design of earthwork for railways with 1520 mm track
SP 37.13330.2012: Industrial transport
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
