PNAJe G-7-002-86
ПНАЭ Г-7-002-86
|
|
Standards for calculating the strength of equipment and pipelines of nuclear power plants
Нормы расчета на прочность оборудования и трубопроводов атомных энергетических установок
Status: Effective
The document applies to equipment and pipelines, the design, manufacture, installation and operation of which are carried out in full accordance with the AEU Rules.
Документ распространяется на оборудование и трубопроводы, проектирование, изготовление, монтаж и эксплуатация которых производятся в полном соответствии с Правилами АЭУ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for the Use of Atomic Energy,
7/1/1987
SKU: RUSS375143
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Gosatomnadzor of Russia »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Fluxes »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
II. Normative legal and other acts of Federal Service for Ecological, Technological and Nuclear Supervision »
2. Nuclear power plants »
Federal rules and regulations »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
II. Normative legal and other acts of Federal Service for Ecological, Technological and Nuclear Supervision »
3. Structures and complexes with experimental and research nuclear reactors, critical and subcritical nuclear stands »
Federal rules and regulations »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.1 For nuclear power »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
4 Objects with nuclear power plants »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
3 Atomic stations »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
27.120.99 Nuclear energy, other aspects »
The Document is Referenced By:
ATPE 9-09: A typical program for the operational control of the state of the base metal and welded joints of equipment and pipelines of nuclear power plants with VVER-1000 RP during operation
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 34484-2018: Stationary steam turbines. Strength calculation standards for cylinder bodies and valves
GOST 34611-2019: Pipe fittings. Earthquake Testing Methodology
GOST R 50.04.08-2019: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of tests. Order of conduct
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 55600-2013: Pipes and pipeline components for pressure over 100 to 320 MPa. Norms and methods of strength calculation
GOST R 57281-2016: Technical diagnostics. Monitoring system of resource of reactor installations equipment and piping. General requirements
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58328-2018: Pipelines of nuclear power plants. The concept of “flow before destruction”
GOST R 58721-2019: Welded joints from steel grades 10ГН2МФА, 15Х2НМФА of equipment parts and pipelines of nuclear power plants. Requirements for welding, surfacing and heat treatment
I 1.2.1.02.019.1121-2016: Determination of mechanical properties of metal of equipment of nuclear power plants by means of non-reference technique in terms of hardness characteristics. Instructions
MU 1.2.3.0057-2009: Guidelines. Composition and scope of testing of special pipe fittings for nuclear power plants
MU 1.2.3.07.0057-2018: Composition and scope of testing of special valves and actuators for nuclear power plants. Guidelines
NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials
OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 24.125.01-89: Noncorrosive steel seamless pipes for pipelines of nuclear thermal power plant. Standard gauge.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
RB 039-07: Safety provision at transportation of radioactive materials
RB 145-18: Safety Guide for the Use of Atomic Energy "Monitoring of the radiation load and determination of the radiation resource of VVER equipment"
RB-007-99: Accounting of high-speed neutrons fluence on the shells and witness samples WWER for further prediction of the burn-up life of shells
RB-018-01: Methodology of Neutron Control on External Surface of Pressure Vessels of WWER-type Reactors
RB-048-09: Life-time Extension of Transportation Packages Designed for Transport of Spent Nuclear Fuel
RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 2082-18-2005: Technical diagnosis and design life prolongation program for cryogenic tank.
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 24.035.04-89: Standards for seismic stability of lifting and transport equipment of nuclear power plants. Part I
RD 24.035.05-89: Thermal and hydraulic calculation of heat exchanging equipment at nuclear power plants
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 95 10547-99: Instuction on application of a safety concept. Leak before break at nuclear power plants
RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements
RD EO 0605-2005: Regulation on procedure of application of expired pipeline fittings at nuclear power plants
RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.
RD EO 1.1.2.29.0954-2014: The procedure for analyzing documentation for equipment supplied to nuclear power plants
RTM 108.020.37-81: Power equipment for power plants with light water-cooled and moderated reactors. Stress calculation during seismic load.
RTM 108.302.03-86: Steam generators of nuclear power plants. Calculation of vibrations of heat transfer tubes
SA 03-004-07: Calculation of the strength of vessels and apparatus
SA-03-003-07: Stressing and vibration calculation of steel industrial pipelines.
ST TsKBA 003-2003: Pipe fittings. Enclosures and covers. Rationing static strength
ST TsKBA 004-2003: Pipe fittings. Bolts and studs. Rationing static strength
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 022-2005: General industrial pipeline valves supplied to nuclear power plants. General technical requirements
ST TsKBA 031-2015: Pipeline valves and actuators for it. Passport. Development and design rules
ST TsKBA 067-2008: Pipe fittings. Spiral-wound heat-resistant gaskets for body-to-lid connections. Types, main dimensions and technical requirements
ST TsKBA 084-2010: Elements of pipelines. Parts and assembly units of titanium alloys for nuclear power plant pipelines. General technical conditions
ST TsKBA 092-2014: Pipeline valves for trunk pipelines. Regulatory loads from pipelines. Calculation method and numerical values
STO 1.1.1.01.007.0281-2010: Management of resource characteristics of elements of nuclear power units
STP 09-04-02(001-STP/A): Calculations for the strength and vibration of steel process pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
