imgalt

Manual for SNiP 2.09.03-85

Пособие к СНиП 2.09.03-85

Design of retaining walls and basement walls

Проектирование подпорных стен и стен подвалов

Status: Attached to an irrelevant document

The manual contains the basic provisions for the calculation of bolts and fasteners of building structures and construction equipment. Progressive types of bolts are considered and recommendations for their use are given. Issues related to the formation of wells in concrete and reinforced concrete, the installation and tightening of bolts, and the alignment of equipment and structures are reflected.

Пособие содержит основные положения по расчету болтов и креплений строительных конструкций и строительного оборудования. Рассмотрены прогрессивные типы болтов и даны рекомендации по их применению. Отражены вопросы, касающиеся образования скважин в бетоне и железобетоне, установки и затяжке болтов, выверки оборудования и конструкций.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Central Research Institute, 1/1/1993

SKU: RUSS375192


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Highways (Max) » Design, construction, repair and maintenance of artificial structures on roads » 18. Retaining walls and other special structures and types of work » 18.5. Anchor structures and fastenings »

Construction (Max) » Reference documents » Reference guidelines to SNiP »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.10 Bolts, screws, studs »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »

ISO classifier » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.020 Lifting equipment » 53.020.20 Cranes »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.040 Construction » 91.040.20 Commercial and industrial buildings »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.10 Metal constructions »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.190 Fittings for buildings »


The Document References:

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10587-84: Uncured epoxy resins. Specifications

GOST 10690-73: Technical potassium carbonate (potash). Technical conditions

GOST 11052-74: Gypsum-alumina expanding cement

GOST 12.2.022-80: Conveyers.

GOST 13463-77: Tab lock washers. Design and dimensions

GOST 1381-73: Hexamethylenetetramine for industrial use. Specifications

GOST 16983-80: Combination wrenches. Design and dimensions

GOST 17013-71: Carbide annular drills. Main sizes

GOST 17014-71: Carbide detachable chisel bits. Main sizes

GOST 17015-71: Carbide cross bits with a central advanced insert. Types and main sizes

GOST 17196-77: Bits for air drills and rotary percussive rigs. Types and basic dimensions

GOST 17275-71: Solid carbide twist drills. Middle series. Design and dimensions

GOST 17276-71: Solid carbide twist taper-shank drills. Design and dimensions

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19527-74: Diamond bits for drilling of exploratory wells. Main sizes

GOST 22735-77: Carbide tipped drills with straight shank. Basic dimensions

GOST 22736-77: Carbide tipped drills with taper shank. Basic dimensions

GOST 24379.0-80: Foundation bolts. General specification

GOST 24379.1-80: Foundation bolts. Structure and dimensions

GOST 2768-84: Acetone technical. Specifications

GOST 2839-80: Double-ended open spanners. Construction and dimensions

GOST 2841-80: Single-ended open spanners. Constructions and dimensions

GOST 2874-82: Drinking water. Hygienic requirements and quality control

GOST 2906-80: Double-ended bent ring spanners. Construction and dimensions

GOST 3108-71: Open-end wrenches unilateral, shortened. Design and dimensions

GOST 380-94: Normal quality carbon steel

GOST 4651-82: Plastics. Compression test method

GOST 5688-61: Tools with carbide tips. Specifications

GOST 5826-78: Reagents. M-phenylendiamin. Specifications

GOST 6139-91: Standart sand for cement testing. Specifications

GOST 6402-70: Lock washers. Specifications

GOST 8282-83: Bent-steel С-shaped equal flange sections. Dimensions

GOST 8728-88: Plasticizers. Specifications

GOST 8736-93: Sand for construction works. Specifications

GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.

SN 181-70: Design Guidelines for Color Finishing of the Interiors of Production Buildings of Industrial Facilities

SNiP 2.01.01-82: Construction climatology and geophysics

SNiP 2.02.03-85: Pile foundations

SNiP 2.03.06-85: Aluminium structures

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 2.09.03-85: Structures for industrial installations

SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion

SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.

The Document is Referenced By:

SA 03-004-07: Calculation of the strength of vessels and apparatus

SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation

STO SA 03.003-2009: Vessels and apparatus. Norms and methods of strength calculation. Calculation of seismic effects

VNTP 06-91: Departmental norms for the technological design of cement plants

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English
Price: $240.00
imgalt
Main-line diesel locomotives. General technical requirements.
Language: English
Price: $514.00
imgalt
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English
Price: $134.00
imgalt
Technical ethylcellosolve. Specifications
Language: English
Price: $283.00
imgalt
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English
Price: $254.00
imgalt
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English
Price: $79.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English
Price: $386.00
imgalt
Locomotives The method of dynamic strength tests
Language: English
Price: $333.00
imgalt
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English
Price: $542.00
imgalt
Locomotives. Requirements for strength and dynamic qualities
Language: English
Price: $808.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!