Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
Правила проектирования, изготовления и монтажа вертикальных цилиндрических стальных резервуаров для нефти и нефтепродуктов
Status: Effective - Introduced for the first time
The organization’s standard applies to steel vertical cylindrical tanks for storing oil and oil products under excess pressure close to atmospheric
Стандарт организации распространяется на резервуары стальные вертикальные цилиндрические для хранения нефти и нефтепродуктов под избыточным давлением близким к атмосферному
Format: Electronic (pdf/doc)
Page Count: 267
Approved: Rostekhexpertiza Association,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Industrial standards »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12.3.005-75: Painting works
GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 23120-78: Steel flights of steps, stair landings and railings. Specifications
GOST 24379.0-80: Foundation bolts. General specification
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 3242-79: Welded joints
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities
GOST 8240-89: Steel hot-rolled channels
GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions
GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 896-69: Paints and varnishes. Photoelectrical method for determination of gloss of coatings
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9307-78: Organic dyes. Alcohol soluble nigrosine. Specifications
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST R 1.4-2004: Standardization in Russian Federation. Standards of organizations. General
GOST R 52350.10-2005: Electrical apparatus for explosive gas atmospheres. Part 10. Classification of hazardous areas
GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST R 52857.6-2007: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation under low-cyclic loads
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 53324-2009: Dyking of storage tanks. Fire safety requirements
GOST R ISO 9000-2008: Quality management systems. Fundamentals and vocabulary
GOST R ISO 9001-2008: Quality management systems. Requirements
OST 26.291-87: Welded vessels and apparatus. General technical conditions
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-517-02: Regulations for Organizations Executing Activity in the Field of Industrial Safety at Hazardous Production Facilities
PB 03-605-03: Rules of design of vertical cylindrical steel tanks for oil and petroleum products
PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries
PB 09-560-03: Rules for industrial safety of oil storage bases and oil product storages
PB 10-14-92: Codes for installation and safe operation of lifting cranes
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 03-606-03: Instructions for visual and measuring control
RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities
RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RD 08-296-99: Regulations for organization of engineering supervision of compliance with project design solutions and quality of construction, overhauling and modification of main pipeline facilities
RD 34.21.122-87: Manual for installation of the lightning protection of buildings and structures
SN 245-71: Sanitary standards for the design of industrial enterprises
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 2.01.09-91: Buildings and constructions in undermine territories and collapsible soils
SNiP 2.02.03-85: Pile foundations
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 2.03.06-85: Aluminium structures
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.09.03-85: Structures for industrial installations
SNiP 2.11.03-93: Storage of petroleum and petroleum products. Fire safety norms.
SNiP 3.03.01-87: Bearing and enclosing structures
SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications
SP 11-105-97: Engineering and geological survey for construction
VNTP 5-95: Norms of technological design of enterprises for provisioning with petroleum products (petroleum storage depots)
The Document is Referenced By:
GOST R 55722-2013: Vessels and apparatus. Stress analysis code. Seismic analysis
STO SA 03.003-2009: Vessels and apparatus. Norms and methods of strength calculation. Calculation of seismic effects
Customers Who Viewed This Item Also Viewed:
Special railway rolling stok. Dynamic and strength testing procedures
Blanks for marine shafts and rudder stocks. Specifications
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.