SDOS-04-2009
СДОС-04-2009
|
|
Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities
Строительный контроль. Методика проведения строительного контроля при строительстве, реконструкции, капитальном ремонте объектов капитального строительства
Status: Effective
The methodology recommends the procedures for organizing and conducting construction control at especially dangerous, technologically complex and unique capital construction sites
Методика рекомендует процедуры организации и проведения строительного контроля на особо опасных, технологически сложных и уникальных объектах капитального строительства
Choose Language:
Format: Electronic (pdf/doc)
Approved: Supervisory Board of the Unified Conformity Assessment System at facilities controlled by Rostekhnadzor,
7/20/2009
SKU: RUSS375248
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.010 Civil engineering in general »
The Document References:
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12071-2000: Soils. Sampling, packing, transportation and storage of samples
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 1497-84: Metals. Methods of tension test
GOST 16483.10-73: Wood. Methods for determination of ultimate strength in compression parallel the grain
GOST 16483.18-72: Wood. Method for determination the number of annual rings in 1 cm and content of latewood in an annual ring
GOST 16483.3-84: Wood. Method of static bending strength determination
GOST 16483.7-71: Wood. Methods for determination of moisture content
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 21.609-83: System of building design documents. Gas supply. Internal equipment. Working drawings
GOST 21.610-85: System of building design documents. Gas supply. Outside gas pipe-lines. Working drawings
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 23337-78: Noise. Methods of noise measurement in residential areas and in the rooms of residential, public and community buildings
GOST 24846-81: Soils. Measuring methods of strains of structures and buildings bases
GOST 25100-95: Soils. Classification
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 27296-87: Sound insulation of enclosing structures
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 30416-96: Soils. Laboratory testing. General requirements
GOST 3242-79: Welded joints
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 5802-86: Mortars. Test methods.
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections
RD 11-03-2006: The procedure for processing and maintaining the files while performing the governmental supervision of construction
RD 11-04-2006: Procedure of state construction supervision inspections and issuing certificates of conformance of built, reconstructed and repaired capital construction objects with the requirements of technical regulations (norms and standards), other statutory norms and design documents
RD 11-05-2007: Instruction On Keeping Construction Log Book
SDOS-03-2009: Construction control. Regulation on conducting construction control during construction, reconstruction, overhaul of capital construction facilities
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 2.02.03-85: Pile foundations
SNiP 23-03-2003: Noise protection
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 31-01-2003: Multicompartment residential buildings
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SNiP II-25-80: Wood constructions
SP 11-105-97: Engineering and geological survey for construction
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
SP 31-108-2002: Refuse ducts for residential and public buildings and structures.
SP 31-110-2003: Design and installation of electrical facilities of residential and public buildings. To replace VSN 59-88
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
VSN 48-86: Guidelines for the Development and Approval of Documents for Medium Repair of Roads
VSN 53-86(r): Rules for assessing the physical wear of residential buildings
VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings
VSN 58-88(r): Ordinance for Rehabilitation, Renovation, and Technical Inspection of Residential Occupancies, Public Utility Facilities, and Facilities Used for Amusement, Entertainment, and Recreation
VSN 60-89: Communications Devices, Alarm and Remote Control Systems for Building Services Equipment Used in Residential and Public Buildings. Design Standards
The Document is Referenced By:
SDOS-03-2009: Construction control. Regulation on conducting construction control during construction, reconstruction, overhaul of capital construction facilities
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
