imgalt

NPB 101-2005*

НПБ 101-2005*

Fire safety standards of the Republic of Belarus. The main fire trucks. General technical requirements. Test methods

Нормы пожарной безопасности Республики Беларусь. Основные пожарные автомобили. Общие технические требования. Методы испытаний

Status: Not effective - Canceled

The norms establish general technical requirements, test methods for main fire engines (fire trucks, pumping hoses, air-foam vehicles, powder vehicles and combined vehicles created on basic automobile chassis with carrying capacities from 2 to 12 tons) and are used for certification fire trucks for compliance with fire safety requirements. The requirements of these Norms are mandatory for all legal entities and individuals operating in the territory of the Republic of Belarus.

Нормы устанавливают общие технические требования, методы испытаний основных пожарных автомобилей (автоцистерны пожарные, автомобили насосно-рукавные, автомобили воздушно-пенного тушения, автомобили порошкового тушения и автомобили комбинированного тушения, созданных на базовых автомобильных шасси грузоподъемностью от 2 до 12 т) и применяются при сертификации пожарных автомобилей на соответствие требованиям пожарной безопасности. Требования настоящих Норм обязательны для всех юридических и физических лиц, осуществляющих свою деятельность на территории Республики Беларусь.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Chief State Sanitary Doctor of the Republic of Belarus, 3/18/2005

SKU: RUSS375345




Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 018/2011 TR CU. On safety of wheeled vehicles » Regulations and standards (to 018/2011 TR CU) »


The Document References:

GOST 10984-74: External lighting and signalling devices for mechanic vehicles, trailers and semitrailers. Light and colour characteristics. Norms and methods of tests

GOST 112-78: Meteorological glass thermometers

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.1.033-81: Occupational safety standards system. Fire safety. Terms and definitions.

GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance

GOST 12.4.026-76: Signal colors and safety signs

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 13837-79: General purpose dynamometers

GOST 14167-83: Turbine cold water meters

GOST 14192-96: Cargo marking

GOST 14967-80: Optical Quadrants. Types, main parameters and dimensions. General specifications

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 17.2.2.01-84: Nature protection. Atmosphere. Automobile diesels. Exhaust smoke opacity. Rates and methods of measurement

GOST 17398-72: Pumps. Terms and definitions

GOST 18099-78: Enamels ML-152. Specifications

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 20306-90: Motor vehicles. Fuel economy. Test methods

GOST 2084-77: Mobile gasoline Specifications

GOST 20961-75: Reflex reflectors for motor vehicles and trailers. General specifications

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 21393-75: Automobiles with diesel engines. Smoke emission. Norms and methods of measurements. Safety requirements

GOST 21398-89: Trucks. General technical requirements

GOST 21624-81: Motor vehicle maintenance and repair system. Requirements for maintainability of items

GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements

GOST 21753-76: Man -machine system control levers

GOST 21758-81: Motor vehicle maintenance and repair system. Determination of maintainability and reparability characteristics during the tests

GOST 22061-76: Machines and technological equipment. Balance quality grade system. General

GOST 22576-90: Motor vehicles. Speed characteristics. Test methods

GOST 22748-77: Motor vehicles. List of outside dimensions. Methods of measuring

GOST 22895-77: Brake systems and braking properties of vehicles. Standards of effectiveness

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 23181-78: Hydraulic brake controls of vehicles. General technical specifications

GOST 2349-75: System 'hook-eye' drawbar couplings for road- and tractor-trailer trains. Basic parameters and dimensions. Technical requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24297-87: Input inspection of products. General provisions.

GOST 24333-80: Sign of accident stopping. General specifications

GOST 26336-97: Tractors, agricultural and forestry machines, self-propelled machinery for grass lawns and gardens. Conventional designations (symbols) of control systems elements, maintenance and information displaying.

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 27258-87: Earth-moving machinery

GOST 27436-87: Internal noise of motor vehicles. Permissible level and methods of measurement

GOST 28352-89: Couplings for fire-fighting equipment Types, general parameters and dimensions

GOST 28443-90: Uniform provisions concerning the approval of vehicles with regard to latches and door retention components

GOST 28559-90: Uniform provisions for the approval of commercial vehicles with regard to their external projections in front of driver's cab rear panel

GOST 3940-84: Electrical equipment for vehicles and tractors. General technical requirements

GOST 4.332-85: Product-quality index system. Fire extinguishing trucks. Nomenclature of indices

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4364-81: Air drive lines for brake systems of vehicles

GOST 6134-87: Rotor-dynamic pumps

GOST 6465-76: Enamels PF-115. Specifications

GOST 6964-72: External lighting and signaling devices for mechanic vehicles, trailers and semitrailers. General technical requirements

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8769-75: Outer lighting devices for automobiles, buses, trolleybuses, tractors, trailers and semitrailers

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility

GOST R 41.17-2001: Uniform provisions concerning the approval of vehicles with regard to the seats, their anchorages and any head restraints

GOST R 41.52-2005: Uniform provisions concerning the categories M2 and M3 small capacity vehicles with regard to their general construction

GOST R 41.61-2001: Uniform provisions concerning the type approval of commercial vehicles with regard to their external projections forward of the cabins rear panel

GOST R 50588-2012: Foaming agents for fire extinguishing. General technical requirements and test methods

GOST R 51318.12-2012: Electromagnetic compatibility of technical equipment. Vehicles, boats and devices with internal combustion engines. Radio disturbance characteristics. Limits and methods for the protection of off-board receivers

PB 03-576-03: Regulations of design and safe operation of pressure vessels

STB GOST R 51266-2003: Motor vehicles. Driving vision. Technical requirements. Test methods

The Document is Referenced By:

Decision 88: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the technical regulations of the Customs Union

STB 2512-2017: The system of fire safety standards. Fire ladders and their components. General technical requirements. Test methods

STB 2513-2017: The system of fire safety standards. Car lifts General technical requirements. Test methods

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!