Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
Руководящий нормативный материал. Машины грузоподъемные. Выбор материалов для изготовления, ремонта и реконструкции сварных стальных конструкций
Status: The document is not up to date. This version of the document contains only eight changes.
The normative document applies to welded assemblies of tower, jib self-propelled and non-self-propelled cranes, mast and re-mounted cranes, timber cranes and manipulator cranes.
Нормативный документ распространяется на сварные узлы башенных, стреловых самоходных и несамоходных кранов, мачтовых и переставных кранов, кранов-лесопогрузчиков и кранов-манипуляторов.
Format: Electronic (pdf/doc)
Page Count: 91
Approved: Federal Service for Ecological, Technological and Nuclear Supervision,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.7 Industrial safety requirements for hoisting facilities »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
The Document References:
GOST 10006-80: Metal pipes
GOST 10145-81: Metals. Stress-rupture test method
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 103-76: Hot-rolled steel strip. Dimensions
GOST 10446-80: Wire. Tensile test method
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10510-80: Metals. Erikson test method for sheets and strips extrusion
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 11150-84: Metals. Methods of tension tests at low temperatures
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11474-76: Bent-steel sections. Specifications
GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips
GOST 11706-78: Tubes. Method the tensile test of ring by cone
GOST 12501-67: Tubes. Twisting moment test method
GOST 12503-75: Steel Methods of ultrasonic control. General requirements
GOST 13663-86: shaped steel pipes technical requirements
GOST 13813-68: Metals. Bend test for sheets and strips thickness less then 4 mm
GOST 14019-2003: Metallic materials. Bend test method
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 1497-84: Metals. Methods of tension test
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 1579-93: Wire. Bend test method
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 18576-96: Non-destructive testing. Railway rails. Ultrasonic testing methods
GOST 18661-73: Steel. Method for measurement of hardness by shock indentation
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions
GOST 19771-93: Roll-formed steel equal leg angles. Dimensions
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-74: Cold-rolled sheet. Range
GOST 20415-82: Non-destructive testing. Acoustic methods. General principles
GOST 20426-82: Radiation methods of defectoscopy
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing
GOST 2246-70: Welding steel wire. Specifications
GOST 22702-96: Boxes from corrugated cardboard for the bottles with edible fluids delivered for export
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters
GOST 22975-78: Metals and alloys. Rockwell hardness test under low loads (using Super-Rockwell test)
GOST 23273-78: Metals and alloys. Measurement of shore hardness with method of striker recoil
GOST 24297-87: Input inspection of products. General provisions.
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 25.502-79: Methods of mechanical testing of metals
GOST 25.503-97: Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing
GOST 25.505-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Method of testing on the low cycle fatigue at heat mechanical loading
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 2590-88: Round steel bars. Dimensions
GOST 2591-88: Square Hot-rolled Steel Bars Dimensions
GOST 26020-83: Hot-rolled steel I-beam with parallel flange edges. Dimensions.
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 26877-91: Metal products
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method
GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests
GOST 30456-97: Metal production. Rolled steel and tubes. Methods of blow bending tests
GOST 3248-81: Metals. Creep test method
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 3565-80: Metals. Method for torsional test
GOST 3728-78: Tubes. Method of bend-over test
GOST 380-2005: Common quality carbon steel. Grades
GOST 4543-71: Structural alloyed steel
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5521-93: Shipbuilding rolled steel
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 8050-85: Carbon dioxide,
GOST 8239-89: Steel hot-rolled I-beams
GOST 8240-97: Hot-rolled steel channels. Assortment
GOST 82-70: Universal hot-rolled steel wide strips. Dimensions
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions
GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions
GOST 8639-82: Square steel tubes. Range
GOST 8645-68: Rectangular steel pipes
GOST 8693-80: Metal pipes. Method of flange testing
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 8817-82: Metals. Upsetting test method
GOST 8818-73: Flattening test of metals
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9087-81: Welding melted fluxes
GOST 9450-76: Measurements microhardness by diamond instruments indentation
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9651-84: Metals. Methods of tension tests at elevated temperatures
GOST 977-88: Steel castings. General specifications
RD 03-606-03: Instructions for visual and measuring control
RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities
RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RD 22-166-86: Construction tower cranes. Rate of calculation
RD 22-207-88: Lifting machines. General requirements and production standards
RD ROSEK-001-96: Hoisting machines. Metal structures. Ultrasonic control. Key Points
RD ROSEK-004-97: Hoisting machines. Capillary control. Key Points
RD ROSEK-006-97: Hoisting machines. Metal structures. Ultrasonic thickness gauging. Key Points
TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
The Document is Referenced By:
PB 10-256-98: Regulations on design and safe operation of hoists (derricks)
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 10-112-2-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 2: Self-Propelled General-Purpose Boom Cranes
RD 10-112-3-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 3: Non-Self-Propelled Tower and Boom Cranes, and Derrick Cranes and Timber-Handling Cranes
RD 22-207-88: Lifting machines. General requirements and production standards
RD 22-28-38-2007: Recommendations on design, production and safe operation of supporting typing back of tower cranes to building structures.
RD 36-62-00: Hoisting equipment. General technical requirements.
RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications
RD RosJeK 10-KM-03: Rules for the design, construction and manufacture of hoisting cranes
RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)
Customers Who Viewed This Item Also Viewed:
Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
Nature protection. Hydrosphere. General requirements to surface and underground water control against pollution by oil and oil products
Man-machine system Semigraphics General ergonomic requirements
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Occupational safety standards system. Means of protection. General requirements and classification
Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
Safety valves, control valves and pressure regulators. Face-to-face lengths
Cables and cable fittings. Safety requirements
Occupational safety standards system. Loading and unloading works General safety requirements
Ventilation systems. General requirements
Occupational safety standards system. Controls of industrial equipment. General safety requirements
Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
Work area air
General sanitary requirements for working zone air
Fire safety. General requirements
Electrical articles. Grounding terminals and grounding signs
Man-machine system. Operator's arm-chair. General ergonomic requirements
Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.