PNST 362-2019
ПНСТ 362-2019
|
|
General automobile roads. Cold asphalt mixes and asphalt mixes. Technical conditions
Дороги автомобильные общего пользования. Смеси асфальтобетонные холодные и асфальтобетон. Технические условия
Status: The document is enacted from 12/01/2019. Registration information 32-PNST dated 09/17/2019 (Rosstandart official website) 12/01/2019
The standard applies to cold asphalt mixes and asphalt concrete intended for the device and patching of road asphalt pavements.
Стандарт распространяется на холодные асфальтобетонные смеси и асфальтобетоны, предназначенные для устройства и ямочного ремонта дорожных асфальтобетонных покрытий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/17/2019
SKU: RUSS376361
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.3 Asphalt pavements (and others using bitumen, tar and mastic gum) »
Construction (Max) »
Standards »
Other state standards used in construction »
93 Civil Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
National standards »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
The Document References:
GN 2.2.5.3532-18: Maximum permissible concentration (MPC) of harmful substances in the air of the working area
GOST 11503-74: Petroleum bitumen. Method for the determination of viscosity
GOST 11504-73: Petroleum bitumen. Method for determination of diluent quality vaporized from liquid bitumen
GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 12.4.131-83: Women’s smock-frocks
GOST 12.4.132-83: Overalls for men
GOST 12.4.252-2013: Occupational safety standards system. Personal protective means of hands. Gloves. General technical requirements. Test methods
GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods
GOST 166-89: Vernier callipers. Specifications
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 19596-87: Spades
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 25818-2017: Fly ash thermal power plants for concrete. Technical conditions
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 32060-2013: Bitumens. Determination of kinematic viscosity
GOST 32511-2013: Diesel fuel EURO. Specifications
GOST 32703-2014: Automobile roads of general use. Crushed stone and gravel from rocks. Technical requirements
GOST 32722-2014: Automobile roads of general use. Natural and crushed sand. Determination of the true density
GOST 32730-2014: Automobile roads of general use. Crushed sand. Specifications
GOST 32761-2014: Automobile roads of general use. Mineral powder. Technical requirements
GOST 32763-2014: Automobile roads of general use. Mineral powder. The method of determining the true density
GOST 32815-2014: Automobile roads of general use. Slag rubble. Determination of medium density and water absorption
GOST 32824-2014: Automobile roads of general use. Natural sand. Technical requirements
GOST 32826-2014: Automobile roads of general use. Slag ruble and sand. Technical requirements
GOST 33029-2014: Public roads. Rubble and gravel from rocks. Granulomere determination
GOST 33057-2014: Public roads. Rubble and gravel from rocks. Determining an average and true density, porosity and water absorption
GOST 33133-2014: Automobile roads of general use. Viscous road petroleum bitumens. Technical requirements
GOST 33142-2014: Public roads. Bitumen of petroleum viscous for road building. Method for determination of the softening point. The method "ring and ball"
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4333-2014: Oil products. Methods for determining the flash point and ignition in an open crucible
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 5789-78: Reagents. Toluene. Specifications
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9179-2018: Lime for building purposes. Specifications
GOST 9805-84: Isopropyl alcohol. Specifications
GOST EN 13302-2013: Bitumens and bituminous binders. Determination of dynamic viscosity
GOST R 1.16-2011: Standardization in Russian Federation. Preliminary national standards. Instructions for development, taking over, application and cancellation
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 55052-2012: Reclaimed asphalt. Specifications
ODN 218.046-01: Design of non-rigid pavement
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SP 243.1326000.2015: Design and construction of low-volume roads
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
The Document is Referenced By:
GOST R 70648-2023: Public roads. Cold asphalt concrete mixtures and asphalt concrete. General specifications
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.