Technical regulations of the Customs Union TR TS 004/2011
Технический регламент Таможенного союза 004/2011
|
|
About the safety of low voltage equipment
О безопасности низковольтного оборудования
Status: Effective
The technical regulations of the Customs Union have been developed with the aim of establishing on the single customs territory of the Customs Union the uniform requirements for the use of low-voltage equipment that are mandatory for application and enforcement, and ensuring the free movement of low-voltage equipment put into circulation in the single customs territory of the Customs Union
Технический регламент Таможенного союза разработан с целью установления на единой таможенной территории Таможенного союза единых обязательных для применения и исполнения требований к низковольтному оборудованию, обеспечения свободного перемещения низковольтного оборудования, выпускаемого в обращение на единой таможенной территории Таможенного союза
Choose Language:
Format: Electronic (pdf/doc)
Approved: Customs Union Commission,
8/16/2011
SKU: RUSS376716
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulatory documents »
Security »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
I. Legislative and regulatory legal acts infield of atomic energy use »
5. Technical regulations »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Decisions, regulations and lists (to TR CU 004/2011) »
Standards for pipe fittings (TPA) »
15. Quality and conformity assessment »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
Standards for pipe fittings (TPA) »
12. Standards for components for piping valves (TPA) »
12.1 Driving Devices »
12.1.4 Executive mechanisms »
12.1.4.1 Electrical »
Standards for pipe fittings (TPA) »
12. Standards for components for piping valves (TPA) »
12.1 Driving Devices »
12.1.3 Drives »
12.1.3.4 Electromagnetic drives »
Standards for pipe fittings (TPA) »
12. Standards for components for piping valves (TPA) »
12.1 Driving Devices »
12.1.3 Drives »
12.1.3.1 Electric Drives »
Standards for pipe fittings (TPA) »
1. Fundamental standards for injection molding machines »
1.3 Reliability and safety »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.5 International cooperation infield of air protection »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
3 International cooperation infield of environmental protection »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
I Basics of technical regulation »
2 Technical regulation in industries and fields of activity »
2.15 Electronic, optical and electrical industry »
PromExpert »
SECTION I. TECHNICAL REGULATION »
I Basics of technical regulation »
1 The main provisions of technical regulation »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.160 Legislation. Administration »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.120 Home Safety »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
ISO classifier »
97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT »
97.030 Household electrical appliances in general »
The Document is Referenced By:
Decision 29: On Amendments to the Decision of the Board of the Eurasian Economic Commission of April 24, 2013 N 91
Decision 57: On the plan for the development of technical regulations of the Eurasian Economic Union and amendments to them
Decision 79: On the Procedure for Interaction of the Member States of the Eurasian Economic Union in the Prevention, Diagnosis, Localization and Elimination of Foci of Particularly Dangerous, Quarantine and Zoonotic Animal Diseases and Regionalization and Compartmentalization
Decision 79: On the plan for the development of technical regulations of the Eurasian Economic Union and amendments to the technical regulations of the Customs Union
GOST 12.1.019-2017: Occupational safety standards system. Electrical safety. General requirements and nomenclature of types of protection
GOST 31174-2017: Gates of metall. General specifications
GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements
GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications
GOST 34610-2019: Pipe fittings. Electric drives. General specifications
GOST 839-2019: Uninsulated wires for overhead power lines. Technical specifications
GOST IEC 60477-2-2013: Laboratory resistors. Part 2. Laboratory a.c. resistors
GOST IEC 60669-2-4-2017: Switches for household and similar fixed electrical installations. Part 2-4. Particular requirements. Isolating switches
GOST IEC 60884-2-1-2016: Plugs and socket-outlets for household and similar purposes. Part 2-1. Particular requirements for fused plugs
GOST IEC 60884-2-4-2016: Electric plugs connectors for household and similar purposes. Part 2-4. Particular requirements for plugs and socket-outlets for SELV and methods of tests
GOST IEC 60884-2-7-2016: Electric plugs connectors for household and similar purposes. Part 2-7. Particular requirements for cord extension sets
GOST IEC 60900-2019: Work under tension. Hand tools for working with voltages up to 1000 V AC and 1500 V DC. General requirements and test methods
GOST IEC 60947-1-2017: Low-voltage distribution and control equipment. Part 1. General rules
GOST IEC 60947-4-2-2017: Low-voltage distribution and control equipment. Part 4-2. Contactors and motor starters. Semiconductor controllers and starters for AC motors
GOST IEC 61558-2-7-2012: Safety of power transformers, power supplies. Part 2-7. Particular requirements and test for transformers and power supplies for toys
GOST IEC 61995-1-2017: Devices for connecting fixtures for household and similar purposes. Part 1. General requirements
GOST IEC 62606-2016: Arc fault detection devices for household and similar use. General requirements
GOST IEC 62626-1-2017: Switching and control equipment low-voltage in the shell. Part 1. Enclosed switch-disconnectors in the enclosure that are not covered by the scope of IEC 60947-3, to ensure disconnection during repair and maintenance
GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements
GOST R 18.3.01-2016: Technology of the aviation fueling. Typical schemes
GOST R 51142-2019: Household services. Hairdressing and beauty salons. General specifications
GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications
GOST R 56017-2014: Conformity assessment. Procedure for mandatory confirmation of product conformity to requirements of the technical regulation of the Customs union «On safety of low voltage equipment»
GOST R 56644-2015: Services for people. Services of the fitness. General requirements
GOST R 56860-2016: Evaluation of quality of works, conducted by a member of a self-regulating organization in the field of construction, reconstruction, major repair of capital structures. General provisions and evaluation requirements
GOST R 57078-2016: Conformity assessment. General assessment (confirmation) equipment used in biotechnology
GOST R 57674-2017: Integrated security systems. General
GOST R 58091-2018: Consumer services. Nail service. Terminology, classification and general requirements
GOST R 58137-2018: Automobile roads of general use. Guidelines for risk assessment during the life cycle
GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements
GOST R 70223-2022: Means of education and upbringing. General safety requirements and control methods
GOST R 70348-2022: Trunk pipeline transport of oil and petroleum products. Marine stanchions. General specifications
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
GOST R 70595-2022: Shipboard fittings. General specifications
Information: List of acts containing mandatory requirements, compliance with which is assessed in the course of control activities in the course of federal state construction supervision
MR 3.5.1.0103-15: Guidelines on application of the aerosol disinfection method in health organizations
Order 12850a: List of acts containing mandatory requirements, compliance with which is assessed during control measures in the implementation of federal state control over the activities of accredited entities
Order 1776: On approval of the technical specifications of the equipment of the stationary car charging station of public access, providing the possibility of rapid charging of electric vehicles
Order 2071: On the approval of methodological recommendations for the implementation of state control (supervision) over compliance with the requirements of technical regulations
Order 808: On approval of the forms of checklists (lists of control questions, the answers to which indicate compliance or non-compliance of a supervised person with mandatory requirements) used by the Federal Service for Supervision of Consumer Rights Protection and Human Welfare, its territorial bodies and its subordinate federal public institutions in carrying out scheduled control (surveillance) activities (raid inspections, on-site inspections) in the implementation of the federal state sanitary and epidemiological
Order 988n/1420n: On approval of the list of harmful and (or) hazardous production factors and work, in the performance of which mandatory preliminary medical examinations are carried out upon admission to work and periodic medical examinations
PNST 162-2016: Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. General technical requirements
PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements
PNST 406-2020: Green standards. Monocrystalline photovoltaic modules. Criteria and indicators to confirm the conformity of "green" products
PNST 409-2020: Green standards. Lighting devices for real estate objects. Criteria and indicators for confirming the conformity of "green" products
Resolution 1236: Rules for decision-making by a national accreditation body on inclusion of accredited persons in the national part of the Unified Register of conformity assessment bodies of the Eurasian Economic Union and on their exclusion from it
SP 256.1325800.2016: Electrical equipment of residential and public buildings. Rules of design and erection
SP 76.13330.2016: Electrical systems
ST RK 2338-2013: PVC insulated and PVC sheath flexible cables. General specification
ST RK 2339-2013: Plastic insulated small-paired telephone cables. Specification
ST RK 2340-2013: Stationary phone cables. Specification
ST RK 2341-2013: Stationary cross wire with insulation from vinyl blend. Specification
ST RK 2526-2014: Heater wires. Technical conditions
ST RK 2527-2014: Cables with plastic insulation and protective coating for field connection. Specifications.
ST RK 2643-2015: Local communication cables of high frequency. Specifications.
ST RK 2644-2015: The cables combined for systems of video surveillance. Technical conditions
ST RK 2794-2015: Wires are self-supporting, insulated and protected for overhead power lines. Technical conditions
ST TsKBA 008-2011: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage
Technical Regulations of the Customs Union 025/2012: On the safety of furniture products
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
