GOST R 58423-2019

ГОСТ Р 58423-2019

Gas pressure regulators for inlet pressure not higher than 10 MPa

Регуляторы давления газа для давления на входе не выше 10 МПа

Status: The document is enacted from 04/01/2020. Registration information 756-st from 09.24.2019 (official website of Rosstandart) 04/01/2020

The standard establishes requirements for the design, functional design, test methods, labeling, typical sizes, classification and documentation of pressure regulators (hereinafter referred to as regulators) used at points, stations and gas pressure reduction plants in accordance with GOST R 56019 and GOST 34011 with the parameters:

Стандарт устанавливает требования к конструкции, функциональному исполнению, методам испытаний, маркировке, типовым размерам, классификации и документации регуляторов давления (далее - регуляторы), используемых на пунктах, станциях и установках редуцирования давления газа по ГОСТ Р 56019 и ГОСТ 34011 с параметрами:

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 62

Approved: Federal Agency for Technical Regulation and Metrology, 9/24/2019

SKU: RUSS376744

Price: $753.30




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.1 Components and assembly units for general engineering applications »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.40 Control valves »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.40 Control valves »


The Document References:

GOST 12020-2018: Plastics. Testing methods of plastics resistance to chemical substances

GOST 12503-75: Steel Methods of ultrasonic control. General requirements

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12997-84: SSI Products. General specifications

GOST 13764-86: Cylindrical helical compression (tension) springs made of round steel. Classification

GOST 13765-86: Cylindrical helical compression (tension) springs made of round steel. Designation of parameters, methods for determination of dimensions

GOST 17187-2010: Noise meters Part 1 Technical requirements

GOST 17378-2001: Carbon and low-alloy steel butt-welding fittings. Reducers. Design

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 20426-82: Radiation methods of defectoscopy

GOST 28338-89: Nominal bores (nominal sizes)

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions

GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications

GOST 5890-78: Pipe connection with screwed ends. Specifications

GOST 6211-81: Conical pipe thread. Profile, basic dimensions and tolerances

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 9544-2015: Pipeline valves. Leakage rates of valves

GOST ISO 17636-2-2017: Non-destructive testing of welds. Radiographic testing. Part 2. X- and gamma-ray control techniques with digital detectors

GOST ISO 3269-2015: Fasteners. Acceptance inspection

GOST R 50753-95: Cylindrical helical compression (extension) springs made of special steels and alloy. General specifications

GOST R 53526-2009: Welding personnel. Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials

GOST R 53687-2009: Qualification test of welders. Fusion welding. Part 3. Copper and copper alloys

GOST R 53688-2009: Qualification test of welders. Fusion welding. Part 2. Aluminium and aluminium alloys

GOST R 53690-2009: Qualification test of welders. Fusion welding. Part 1. Steels

GOST R 54006-2010: Approval testing of welders. Fusion welding. Part 4. Nickel and nickel alloys

GOST R 54795-2011: Non-destructive testing. Qualification and certification of personnel. General principles

GOST R 54823-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa

GOST R 54961-2012: Gas distribution systems. Consumers gas networks. General requirements to operation. Operational documentation

GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics

GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods

GOST R 56019-2014: Gas distribution systems. Gas pressure regulating stations. Functional requirements

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

GOST R ISO 148-1-2013: Metallic materials. Charpy pendulum impact test. Part 1.Test method

GOST R ISO 15607-2009: Specification and qualification of welding procedures for metallic materials. General rules

GOST R ISO 15609-1-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 1. Arc welding

GOST R ISO 15610-2009: Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables

GOST R ISO 15611-2009: Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience

GOST R ISO 15612-2009: Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure

GOST R ISO 15613-2009: Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test

GOST R ISO 15614-1-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1. Arc and gas welding of steels and arc welding of nickel and nickel alloys

GOST R ISO 15614-2-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 2. Arc welding of aluminium and aluminium alloys

GOST R ISO 17637-2014: Non-destructive testing of welds. Visual testing of fusion-welded joints

GOST R ISO 1817-2009: Rubber. Determination of resistance to liquids effect

GOST R ISO 9000-2015: Quality management systems. Fundamentals and vocabulary

GOST R 54553-2019: Rubber and thermoplastic elastomers. Determination of tensile properties

GOST R 58399-2019: Non-destructive testing. Optical methods. General requirements

GOST R 58424-2019: Safety devices for gas pressure control stations and installations. Gas safety shutdown devices for inlet pressure up to 10 MPa

GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Hot-rolled sheet. Range
Language: English
Price: $72.27
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!