imgalt

Supplement to SP 63.13330

Пособие к СП 63.13330

Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement

Методическое пособие. Расчет железобетонных конструкций без предварительно напряженной арматуры

Status: Effective

The document contains instructions SP 63.13330.2012 on the design of concrete and reinforced concrete structures without prestressing reinforcement, the position, details of these instructions, calculation examples, as well as recommendations necessary for design. For engineers, designers, as well as students of construction universities. Recommendations The guidelines apply to the design of concrete and reinforced concrete structures of buildings and structures made of heavy fine-grained, lightweight, cellular and tensile concrete without prestressing reinforcement and operated in the climatic conditions of Russia under the systematic influence of temperatures not higher than 500 degrees Celsius and not lower than minus 700 degrees Celsius in an environment with a non-aggressive degree of exposure to a static load.

Документ содержит указания СП 63.13330.2012 по проектированию бетонных и железобетонных конструкций без предварительного напряжения арматуры, положении, детализирующие эти указания, примеры расчета, а также рекомендации необходимые для проектирования. Для инженеров, проектировщиков, а также студентов строительных вузов. Рекомендации Пособия распространяются на проектирование бетонных и железобетонных конструкций зданий и сооружений, выполняемых из тяжелого мелкозернистого, легкого, ячеистого и напрягающего бетонов без предварительного напряжения арматуры и эксплуатируемых в климатических условиях России при систематическом воздействии температур не выше 500 градусов Цельсия и не ниже минус 700 градусов Цельсия в среде с неагрессивной степенью воздействии при статическом действии нагрузки.

Choose Language: 
Format: Electronic (pdf/doc)
SKU: RUSS377350


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Reference documents » Reference guidelines to SNiP »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »


The Document References:

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

GOST 23732-2011: Water for concretes and cement mortars Technical specifications.

GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements

GOST 24211-2008: Admixtures for concretes and mortars. General specifications

GOST 25192-2012: Concretes. Classification and general technical requirements

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 27005-2014: Light-weight and cellular concretes. Rules for control and assessment density

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures

GOST 31108-2003: General structural Portland clinker cements. Specifications

GOST 4.212-80: Product-quality index system. Building. Concretes. Nomenclature of indices

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 7473-2010: Fresh concrete. Specifications

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8736-93: Sand for construction works. Specifications

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST R 52085-2003: Formworks. General specifications

GOST R 52086-2003: Formworks. Terms and definitions

GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

SP 130.13330.2011: Production of precast reinforced concrete structures and products

SP 131.13330.2012: Building climatology

SP 14.13330.2011: Construction in seismic regions.

SP 16.13330.2011: Steel structures

SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)

SP 20.13330.2011: Loads and impacts

SP 22.13330.2011: Buildings and structures foundations

SP 48.13330.2011: Organization of construction

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

SP 429.1325800.2018: Enclosing constructions with effective insulation and sheet cladding. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!