GOST R 58720-2019
ГОСТ Р 58720-2019
|
|
Carts, side frames, nadressorny beams and connecting special freight-type cars. General specifications
Тележки, рамы боковые, балки надрессорные и соединительные специальных вагонов грузового типа. Общие технические условия
Status: The document is enacted from 05/01/2020. Registration information 1340-st dated 12/05/2019 (Rosstandart official website) 05/01/2020
The standard applies to biaxial and four-axle bogies of special freight-type wagons intended for use on 1520 mm gauge general and non-common rail tracks, as well as side frames, nadressor beams and connecting bogies.
Стандарт распространяется на двухосные и четырехосные тележки специальных вагонов грузового типа, предназначенных для обращения на железнодорожных путях общего и необщего пользования колеи 1520 мм, а также рамы боковые, балки надрессорные и соединительные тележек.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/5/2019
SKU: RUSS377848
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
The Document References:
GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 10791-2011: All-rolled wheels. Specifications
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15.902-2014: System of development and launching into manufacture. Railway rolling stock. Procedure of development and launching into manufacture
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications
GOST 3242-79: Welded joints
GOST 32880-2014: Parking brake of the rolling-stock. Specifications
GOST 32894-2014: Railway application. Inspection control. General provisions
GOST 33211-2014: Freight cars. Requirements for strength and dynamic properties
GOST 33597-2015: Braking systems of railway rolling stock. Inspection procedures
GOST 33749-2016: Hydraulic clampers for railway rolling stock. General specifications
GOST 33788-2016: Freight and passenger coaches. Test methods for strength and dynamic quality
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
GOST 34387-2018: Side bearings of the freight wagon bogies. General specifications
GOST 34503-2018: Wedges friction trolleys of freight cars. General specifications
GOST 4686-2012: Brake beams of brake leverage gear. Specifications.
GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9238-2013: Construction and rolling stock clearance diagrams
GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications
GOST R 55050-2012: Railway rolling stock. Permissible exposure norms to the railway track and test methods.
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.