imgalt

GOST R 58774-2019

ГОСТ Р 58774-2019

The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications

Стены наружные каркасно-обшивные самонесущие и ненесущие с каркасом из стальных холодногнутых оцинкованных профилей. Общие технические условия

Status: The document is enacted from 05/01/2020. Registration information 1412-st dated 12/19/2019 (Rosstandart official website) 05/01/2020

The standard applies to external frame-sheathing self-supporting, curtain walls and curtain walls (hereinafter - CBS) with a frame made of cold-rolled steel galvanized profiles used in residential, public and industrial buildings of any level of responsibility according to GOST 27751 under the following conditions:

Стандарт распространяется на наружные каркасно-обшивные самонесущие, навесные и ненесущие стены (далее — КОС) с каркасом из стальных холодногнутых оцинкованных профилей, применяемых в жилых, общественных и производственных зданиях любого уровня ответственности по ГОСТ 27751 при следующих условиях:

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/19/2019

SKU: RUSS377898

Price: $606.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 91 Building materials and construction »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.3 Testing of products in construction »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.20 Wooden structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.20 Wooden structures »


The Document References:

Federal Law 162-FZ: About standardization in the Russian Federation

Federal Law 184-FZ: About technical regulation

GOST 10354-82: Polyethylene film Specifications

GOST 10499-95: Heat insulating products made of glass staples fibre. Technical requirements

GOST 14192-96: Cargo marking

GOST 14350-80: Roll-formed section. Terms and definitions

GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.

GOST 164-90: Vernier height gauges. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 18124-2012: Chrysotile cement sheets are flat. Technical conditions

GOST 19903-2015: Hot-rolled sheet. Range

GOST 19904-90: Cold-rolled steel sheets. Dimensions

GOST 20477-86: Polyethylene tape with adhesive layer. Specifications

GOST 23166-99: Windows. General specifications

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing

GOST 27296-2012: Buildings and constructions. Methods for measurement of sound insulation of protecting designs

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 28778-90: Expansion bolt self-anchoring for building. Specifications

GOST 30244-94: Building materials. Methods for combustibility test

GOST 31167-2009: Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions

GOST 31251-2008: Facades of buildings. Fire hazard test method

GOST 32314-2012: Factory made mineral wool products used for thermal insulation of buildings. General specifications

GOST 32318-2012: Roofing and hydraulic-insulating flexible bitumen-based and holymeric (thermoplastic or elastomer) materials. Method for determination of water vapour transmission properties

GOST 32614-2012: Gypsum plasterboards buildings. Specifications

GOST 34180-2017: Steel cold and cold rolled hot-galvanized sheet with polimer coating, prepainted by the continuous coil-coating process. Specifications

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 6266-97: Gypsum plasterboards

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8026-92: Levelling rules. Specifications

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST ISO 2702-2015: Heat-treated steel tapping screws. Mechanical properties

GOST ISO 9223-2017: Corrosion of metals and alloys. Corrosivity of atmospheres. Classification, determination and estimation

GOST R 51829-2001: Gypsum fibre sheets. Specifications

GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications

GOST R 53223-2016: Chrysotile cement slabs for wall facing. Specifications

GOST R 56623-2015: Non-destructive testing. Methods of determination of thermal resistance of enclosing structures

GOST R 56731-2015: Anchors for use in concrete. Test methods

GOST R 57270-2016: Building materials. Methods for combustibility tests

GOST R 57787-2017: Anchor fastenings for construction. Terms and definitions. Classification

SP 14.13330.2018: Seismic building design code

SP 16.13330.2017: Steel structures

SP 163.1325800.2014: The designs with application of gypsum plasterboards and gypsum fiber sheets. Terms of design and installation

SP 17.13330.2017: The roofs

SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)

SP 20.13330.2011: Loads and impacts

SP 20.13330.2016: Loads and actions

SP 230.1325800.2015: Construction enclosing of buildings characteristics of thermal conductive of inclusions

SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules

SP 28.13330.2017: Protection against corrosion of construction

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 51.13330.2011: Noise protection and rooms acoustics.

SP 55-101-2000: Fencing structures made with gypsum-cardboard sheets

SP 55-102-2001: Structures made with gypsum fiber sheets

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

SP 260.1325800.2023: Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!