GOST R 53332-2019
ГОСТ Р 53332-2019
|
|
Fire fighting equipment. Motor-pumps fire. Main parameters. General technical requirements. Test methods
Техника пожарная. Мотопомпы пожарные. Основные параметры. Общие технические требования. Методы испытаний
Status: The document is enacted from 01.01.2021. Registration information 1496-st dated 12/19/2019 (Rosstandart official website) 01/01/2021
The standard applies to fire-fighting motor pumps driven by an internal combustion engine, designed to supply water, aqueous solutions of foaming agents with a density of up to 1100 kg • m3, with a hydrogen index of 7 to 10.5 pH, and a temperature of up to 303 k (30 ° C), containing more than 0.5% of the particles of the condensed phase with a size of not more than 3 mm.
Стандарт распространяется на пожарные мотопомпы с приводом от двигателя внутреннего сгорания, предназначенные для подачи воды, водных растворов пенообразователей плотностью до 1100 кг•м3, с водородным показателем от 7 до 10,5 рН, температурой до 303 к (30 °С), содержащих не более 0,5 % частиц конденсированной фазы размером не более 3 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/19/2019
SKU: RUSS378809
The Product is Contained in the Following Classifiers:
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.20 Fire fighting equipment »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.20 Fire fighting equipment »
As a Replacement Of:
GOST R 53332-2009: Fire equipment. Fire motor pumps. Main parameters. General technical requirements. Methods of testing
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 10150-2014: Piston internal combustion engines. General specifications
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 16920-93: Manometric thermometers and temperature transducers
GOST 17187-2010: Noise meters Part 1 Technical requirements
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 2.602-2013: Unified system for design documentation. Repair documents
GOST 21339-82: Tachometers
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 21753-76: Man -machine system control levers
GOST 23660-79: System of technical maintenance and repair of equipment. Maintainability and reparability for item development
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements
GOST 6134-2007: Rotodynamic pumps. Test methods
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST ISO 17769-1-2014: Fluid pumps and units. Basic terms, definitions, quantities, letter symbols and units. Part 1. Fluid pumps
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST ISO 898-2-2015: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
GOST R 50588-2012: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 52283-2019: Fire fighting equipment. Centrifugal fire pumps. General technical requirements. Test methods
GOST R 53279-2009: Fire equipment. Fire connecting heads. General technical requirements. Methods of testing
GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods
GOST R 56274-2014: General ergonomics requirements and properties
GOST R ISO 26800-2013: Ergonomics. General principles and concepts
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.