GOST R 58787-2019
ГОСТ Р 58787-2019
|
|
Electric generating sets with internal combustion engines for nuclear power plants. General technical conditions. Accommodation
Установки электрогенераторные с двигателями внутреннего сгорания для атомных станций. Общие технические условия. Размещение
Status: Effective - Introduced for the first time. ICS 3-2020
The standard establishes general technical requirements, as well as general requirements for completeness, testing, transportation, storage and placement of stationary electric generating sets with diesel internal combustion engines of safety systems (SB) and block diesel generator sets (DGU), with a rated power of 500 kW and above , rated voltage 400, 6300, 10500 V, current frequency 50 Hz, intended for operation in standby modes, autonomous continuous operation, which are part of a nuclear power plant (NPP).
Стандарт устанавливает общие технические требования, а так же общие требования к комплектности, испытаниям, транспортированию, хранению и размещению стационарных электрогенераторных установок с дизельными двигателями внутреннего сгорания систем безопасности (СБ) и блочных дизель-генераторных установок (ДГУ), номинальной мощностью 500 кВт и выше, номинальным напряжением 400, 6300, 10500 В, частотой тока 50 Гц, предназначенных для эксплуатации в режимах ожидания, автономной продолжительной работы, входящих в состав атомной станции (АС).
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/19/2019
SKU: RUSS380117
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
3 Atomic stations »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
National standards »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
Federal Law 170-FZ: On technical inspection of vehicles and on amendments to certain legislative acts of the Russian Federation
Federal Law 412-FZ: On accreditation in the national accreditation system
GOST 10150-2014: Piston internal combustion engines. General specifications
GOST 10169-77: 3-phase synchronous machines. Test methods
GOST 10448-2014: Piston internal combustion engines. Acceptance. Test methods
GOST 11102-75: Acceptance and acting instruments and devices for diesel automation. Types, basic parameters and technical requirements
GOST 11828-86: Rotating electrical machines. General test methods
GOST 11928-83: Automated diesels and gas engines systems of alarm-and-warning signaling and protection
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.044-2018: Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.4.275-2014: Occupational safety standards system. Personal hearing protective equipment. General technical requirements. Test methods
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 14965-80: Three-phase synchronous generators of power over 100 kw
GOST 15.005-86: Creation of articles manufactured individually or in small batches and assembled at the place of operation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 2.602-2013: Unified system for design documentation. Repair documents
GOST 20375-2014: Electric generating sets with internal combustion engines. Terms and definitions
GOST 23162-2014: Electric generating sets with internal combustion engines. System of a legend
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 26291-84: Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
GOST 27.002-2015: Dependability in technics. Terms and definitions
GOST 305-2013: Diesel fuel. Specifications
GOST 30631-99: General requirements for machines, instruments and other industrial products as to environment mechanical stability
GOST 31540-2012: Electric generating plants with gasiline, diesel and gas internal combustion engines. Test methods
GOST 31966-2012: Marine, lokomotive and industrial engines. General safety requirements
GOST 32137-2013: Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
GOST 33105-2014: Electric generating sets with internal combustion engines. General specifications
GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST IEC 60034-1-2014: Rotating electrical machines. Part 1. Nominal values of the parameters and operational performance
GOST ISO 8528-5-2017: Reciprocating internal combustion engine driven alternating current generating sets. Part 5. Generating sets
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 15.301-2016: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 2.601-2019: Unified system of design documentation. Operational documents
GOST R 51317.4.28-2000: Electromagnetic compatibility of technical equipment. Immunity to variation of power frequency. Requirements and test methods
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 52368-2005: Diesel fuel EVRO. Specifications
GOST R 53176-2008: Electric generating plants with gasoline, diesel and gas internal combustion engines. Reliability indexes. Requirements and test methods
GOST R 53987-2010: Reciprocating internal combustion engine driven alternating current generating sets. Part 1. Application, ratings and performance
GOST R 55231-2012: Automatic rotational frequency control systems (ARFCS) of marine, locomotive and industrial reciprocating internal combustion engines. General specifications
GOST R 55437-2013: Reciprocating internal combustion engines. Classification according to scope of automatization and technical requirement for automatization
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
NP 031-01: Design norms for antiseismic atomic power stations
NP 104-18: Federal norms and rules in the field of the use of atomic energy "Welding and welding of equipment and pipelines of nuclear power plants"
NP 105-18: Federal norms and rules in the field of the use of atomic energy "Rules for the control of metal equipment and pipelines of nuclear power plants in the manufacture and installation"
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 3. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
