ST CKBA 125-2020
СТ ЦКБА 125-2020
|
|
Pipe fittings. Types of control and testing
Арматура трубопроводная. Виды контроля и испытаний
Status: The document is enacted from 01.01.202101.01.2021
The standard applies to pipeline fittings and establishes the types of control and testing of prototypes and serially manufactured fittings, including testing of materials for main parts, workpieces, semi-finished products. The standard applies to valves for various industries, except for valves for nuclear power plants.
Стандарт распространяется на трубопроводную арматуру и устанавливает виды контроля и испытаний опытных образцов и серийно изготавливаемой арматуры, в том числе испытания материалов основных деталей, за-готовок, полуфабрикатов. Стандарт распространяется на арматуру для различных отраслей промышленности, кроме арматуры для атомных станций
Choose Language:
Format: Electronic (pdf/doc)
Approved: JSC NPF TsKBA,
6/29/2020
SKU: RUSS380328
The Product is Contained in the Following Classifiers:
Organization Standards »
Standards NPF TsKBA »
The Document References:
GOST 10145-81: Metals. Stress-rupture test method
GOST 11150-84: Metals. Methods of tension tests at low temperatures
GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase
GOST 14019-2003: Metallic materials. Bend test method
GOST 1497-84: Metals. Methods of tension test
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 18661-73: Steel. Method for measurement of hardness by shock indentation
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 21073.0-75: Non-ferrous metals. Determination of grain size. General requirements
GOST 22762-77: Metals and alloys. Yield point hardness test by ball indentation
GOST 22975-78: Metals and alloys. Rockwell hardness test under low loads (using Super-Rockwell test)
GOST 23273-78: Metals and alloys. Measurement of shore hardness with method of striker recoil
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST 25.502-79: Methods of mechanical testing of metals
GOST 25.503-97: Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 26883-86: Exposure factors. Terms and definitions
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold
GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
GOST 28201-89: Basic environmental testing procedures. Part 2. Tests. Test Ca: Damp heat, steady state
GOST 28202-89: Basic environmental testing. Part 2. Tests. Test Sa: Simulated solar radiation at ground level
GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )
GOST 28205-89: Basic environmental testing procedures. Part 2. Tests. Guidance for solar radiation testing
GOST 28207-89: Basic environmental testing procedures. Part 2. Tests. Test Ka: Salt mist
GOST 28208-89: Basic environmental testing procedures. Part 2. Tests. Test M: Low air pressure
GOST 28209-89: Basic environmental testing procedures. Part 2. Tests. Test N: Change of temperature
GOST 28210-89: Basic environmental testing procedures. Part 2. Tests. Test Q: Sealing
GOST 28213-89: Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock
GOST 28218-89: Basic environmental testing procedures. Part 2. Tests. Test Ed: Free fall
GOST 28219-89: Basic environmental testing procedures. Part 2. Tests. Guidance on change of temperature tests
GOST 28224-89: Basic environmental testing procedures. Part 2. Test Z/AD. Composite temperature and humidity cyclic test
GOST 28234-89: Basic environmental testing procedures. Part 2. Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 30630.1.2-99: Mechanical environment stability test methods for machines, instruments and other industrial products. Tests for influences of vibration
GOST 30630.1.7-2013: Test methods for resistance to mechanical external influencing factors for machines, instruments and other industrial products. Tests on the effect of strikes in free fall, in the fall as a result of rollover; to the impact of pitching and long slopes
GOST 30630.2.1-2013: Climatic environment endurance test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST 30630.2.5-2013: Test methods for resistance to climatic external influencing factors for machines, instruments and other industrial products. Tests on the effects of salt spray
GOST 31296.2-2006: Noise. Description, measurement and assessment of environmental noise. Part 2. Determination of sound pressure levels
GOST 3248-81: Metals. Creep test method
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 33856-2016: Pipe fittings. Fire Test Method
GOST 34437-2018: Pipe fittings. Methods of experimental determination of hydraulic and cavitation characteristics
GOST 3565-80: Metals. Method for torsional test
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 9.050-75: Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9450-76: Measurements microhardness by diamond instruments indentation
GOST 9651-84: Metals. Methods of tension tests at elevated temperatures
GOST IEC 60068-2-57-2016: Environmental dynamic test methods for machines, instruments and other technical articles. Vibration tests in the form of an accelerogram and beat pulses
GOST R 15.301-2016: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 27.403-2009: Dependability in technics. Compliance tests plans for reliability
GOST R 51369-99: Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
GOST R 51370-99: Climatic environment stability test methods for machines, instruments and other industrial products. Test for influence of solar radiation
GOST R 51371-99: Mechanical environment stability test methods for machines, instruments and other industrial products. Test for influence of shocks
GOST R 51372-99: Accelerated life and storable life tests methods in special aggressive and other special medias for technical products, material and systems of materials. General
GOST R 51684-2000: Climatic environment stability test methods of machines, instruments and other industrial products. Test for low air pressure
GOST R 51802-2001: Aggressive and other special media stability test methods for machines, instruments and other industrial products
GOST R 51804-2001: Environment, stability test methods for machines, instruments and other industrial products. Combined tests
GOST R 51909-2002: Environment stability test methods for machines, instruments and other industrial products. Tests for transportation and storage
GOST R 52728-2007: Method of strain-and-temperature measurements in situ. General requirements
GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods
GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes
GOST R 9.905-2007: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements
PB 03-593-03: Regulations on Organization and Execution for Acoustic-Emission Inspection of Vessels, Boilers, Apparatus and Process Piping
R 50-54-22-87: Recommendations. Calculations and tests of strength. Stereoscopic fractography techniques
R 50-54-45-88: Recommendations. Calculations and tests of strength. Experimental methods for determining the stress-strain state of machine elements and structures. Method of full-scale tensometry of power equipment
RD 102-008-2002: Instructions for diagnosing technical condition of pipelines with contactless magnetometric method.
RD 302-07-279-89: Pipe fittings. Methods of assessing the reliability of the test results and (or) operation
RD 34.17.416-96: Guidelines for the spectral analysis of metal parts of power plants using a steeloscope
ST CKBA 097-2019: Pipe fittings. Test methods for resistance to climatic external factors
ST CKBA 122-2018: Pipe fittings. Testing method for resistance to vibration
ST TsKBA 001-2003: Pipe fittings. General Fire Test Requirements
ST TsKBA 028-2007: Pipe fittings. Periodic testing. General requirements
ST TsKBA 049-2009: Pipe fittings. Ensuring reliability in manufacturing
ST TsKBA 080-2015: Pipe fittings. Methods of testing for seismic resistance
|
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
