imgalt

GOST R 58654-2019

ГОСТ Р 58654-2019

Automobile roads for general use. Spiral corrugated metal pipes. Specifications

Дороги автомобильные общего пользования. Трубы металлические гофрированные спиральновитые. Технические условия

Status: Effective - Introduced for the first time. ICS 1-2020

The standard applies to spiral metal corrugated pipes (SVMGT) intended for the construction of artificial road structures under embankments of public highways.

Стандарт распространяется на спиральновитые металлические гофрированные трубы (СВМГТ), предназначенные для устройства искусственных дорожных сооружений под насыпями автомобильных дорог общего пользования.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/13/2019

SKU: RUSS380373

Price: $283.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 93 Civil Engineering »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.3 Testing of products in construction »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.01 Road construction in general »

National standards » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.01 Road construction in general »


The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

GOST 10354-82: Polyethylene film Specifications

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 11371-78: Washers. Specifications

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 14192-96: Cargo marking

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 19281-2014: High strength rolled steel. General specification

GOST 22032-76: Studs with threaded end of 1d. Product grade B. Construction and dimensions

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 30693-2000: Roofing and hydraulic insulating mastics. General specifications

GOST 34180-2017: Steel cold and cold rolled hot-galvanized sheet with polimer coating, prepainted by the continuous coil-coating process. Specifications

GOST 3640-94: Zinc. Specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions

GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking

GOST 9.315-91: Unified system of corrosion and ageing protection. Hot-dip aluminium coatings. General requirement and methods of checking

GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications

GOST R 58101-2018: Conformity assessment. Procedure for confirmation of product compliance to requirements of technical regulation «Safety of roads»

GOST R ISO 4017-2013: Hexagon head screws. Product grades A and B

ODM 218.2.082-2017: Guidelines for conducting hydraulic calculations of small ISSO on roads

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste

SanPiN 2.2.3.1384-03: Hygienic requirements to organizations of civil execution and civil works

SNiP 12-03-2001: Labor safety in construction industry

SNiP 12-04-2002: Safety in construction. Part 2. Construction works

SP 20.13330.2011: Loads and impacts

SP 28.13330.2017: Protection against corrosion of construction

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 49.13330.2010: Labor safety in construction. Part 1. General requirements

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 991-72: Sanitary regulations when painting using manual sprayers

The Document is Referenced By:

ODM 218.2.110-2020: Methodical recommendations for hydraulic calculations of spiral metal corrugated pipes

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English
Price: $240.00
imgalt
Main-line diesel locomotives. General technical requirements.
Language: English
Price: $514.00
imgalt
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English
Price: $134.00
imgalt
Technical ethylcellosolve. Specifications
Language: English
Price: $283.00
imgalt
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English
Price: $254.00
imgalt
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English
Price: $79.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English
Price: $386.00
imgalt
Locomotives The method of dynamic strength tests
Language: English
Price: $333.00
imgalt
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English
Price: $542.00
imgalt
Locomotives. Requirements for strength and dynamic qualities
Language: English
Price: $808.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!