GOST R 58863-2020
ГОСТ Р 58863-2020
|
|
Production tables. Metal workbenches. General specifications
Столы производственные. Верстаки из металла. Общие технические условия
Status: The document is introduced from 01/01/2021. Information on registration of 231-st from 05/26/2020 (official website of Rosstandart) 01/01/2021
The standard applies to metal workbenches intended for the processing, assembly and repair of metal products and other materials, installed in enclosed spaces, with or without accessories, in which the frame, hanging drawer (pull-out shelf) and screen are made of metal, and table top - made of metal, wood or other materials combined with metal.
Стандарт распространяется на верстаки из металла, предназначенные для обработки, сборки и ремонта изделий из металла и других материалов, устанавливаемые в закрытых помещениях, с аксессуарами или без них, у которых каркас, подвесной выдвижной ящик (выдвижная полка) и экран выполнены из металла, а столешница — из металла, древесных или других материалов, комбинированных с металлом.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/26/2020
SKU: RUSS380383
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT »
97.140 Furniture »
National standards »
97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT »
97.140 Furniture »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 10632-2014: Wood particle boards. Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 14192-96: Cargo marking
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 19414-90: Solid glued wood. General requirements for glued finger joints
GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 20400-2013: Furniture production. Terms and definitions
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 24404-80: Product of woods and wooden materials. Coatings of lacquers and paints. Classification and designations
GOST 32274-2013: Monostructural fibreboards. Specifications
GOST 3242-79: Welded joints
GOST 33080-2014: Timber structures. Strength classes of structural sawn timber and methods of its determination
GOST 3916.1-2018: Plywood for general use with outer layers of deciduous veneer. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes
GOST IEC 61340-5-1-2019: Electrostatics. Protection of electronic devices from electrostatic phenomena. General requirements
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R 58865-2020: Tool cabinets made of metal. General specifications
GOST R ISO 15979-2017: Open end blind rivets with break pull mandrel and protruding head (steel body and steel mandrel)
GOST R ISO 15980-2017: Open end blind rivets with break pull mandrel and countersunk head (steel body and steel mandrel)
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.