GOST R 58910.2-2020
ГОСТ Р 58910.2-2020
|
|
Rubber and rubber. Industrial control materials. Part 2. Specifications
Каучук и резина. Материалы промышленные контрольные. Часть 2. Технические условия
Status: The document is introduced from 01/01/2021. Information on registration of 336-st from 06/30/2020 (official website of Rosstandart) 01/01/2021
The standard applies to industrial control materials (hereinafter - PCM) used in quality control of rubbers and rubbers in the process of their production and testing, including arbitration, as well as in the production of control carbon black.
Стандарт распространяется на промышленные контрольные материалы (далее — ПКМ), применяемые при контроле качества каучуков и резин в процессе их производства и испытаний, в том числе арбитражных, а также при производстве контр��льного технического углерода.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/30/2020
SKU: RUSS380436
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.1 Products of main chemical industries »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.040 Raw materials for rubber and plastics »
83.040.10 Latex and crude rubber »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.040 Raw materials for rubber and plastics »
83.040.10 Latex and crude rubber »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 11812-66: Vegetable oils. Methods for the determination of moisture and volatile matters
GOST 127.2-93: Sulphur for industrial use. Test methods
GOST 14870-77: Reagents. Methods for determination of water
GOST 15627-2019: Synthetic butadiene-methyl styrene rubbers SKMS-30ARK and styrene butadiene SKS-30ARK. Technical specifications
GOST 18995.2-73: Liquid chemical products. Method for determination of refractive index
GOST 18995.4-73: Organic chemical products. Methods for determination of melting point interval
GOST 202-84: Zinc white
GOST 20287-91: Petroleum products Method of test for flow point and pour point
GOST 21119.10-75: Organic dyestuffs and inorganic pigments. Method for determination of ash content
GOST 21119.2-75: General methods of test for pigments and extenders. Determination of soluble in water matters mass fraction
GOST 21119.4-75: General methods of test for pigments and extenders. Methods for determination of residue on sieve
GOST 21119.9-75: Organic dyestuffs and inorganic pigments. Method for determination of loss in mass on ignition
GOST 29039-91: Technical oleic acid. Acceptance rules and test methods
GOST 33-2016: Petroleum and petroleum products. Transparent and opaque liquids. Determination of kinematic and dynamic viscosity
GOST 33364-2015: Crude petroleum and liquid petroleum products. Determination of density, relative density and API gravity by hydrometer
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 4333-2014: Oil products. Methods for determining the flash point and ignition in an open crucible
GOST 5474-66: Vegetable oils. Method for the determination of ash
GOST 5475-69: Vegetable oils. Methods for the determination of iodine value
GOST 5478-2014: Vegetable oils and natural fatty acids. Method for determination of saponification value
GOST 5479-64: Vegetable oils and natural fatty acids. Methods of determination of unsaponifiables
GOST 740-76: Thiuram D. Specifications
GOST R 54545-2011: Synthetic rubber. Determination of total and water soluble ash
GOST R 54546-2011: Rubber synthetic. Determination of volatile matter content
GOST R 54550-2011: Synthetic rubbers. Determination of the mass fraction of extractables
GOST R 54551-2011: Rubber styrene-butadiene. Determination of bound styrene content. Refractive index method
GOST R 54552-2011: Rubber and rubber compounds. Determination of viscosity, stress relaxation and pre-vulcanization characteristics by Mooney viscometer
GOST R 54553-2019: Rubber and thermoplastic elastomers. Determination of tensile properties
GOST R 54554-2011: Standard rubber compounds. Materials, equipment and procedures for mixing and preparing vulcanized sheets
GOST R 54555-2011: Styrene-butadiene rubber (SBR). Preparation and testing of rubber compounds
GOST R 58910.1-2020: Rubber and rubber. Industrial control materials. Part 1. General requirements
The Document is Referenced By:
GOST R 58910.1-2020: Rubber and rubber. Industrial control materials. Part 1. General requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.