GOST R 58915-2020
ГОСТ Р 58915-2020
|
|
Rolled plates of cryogenic steels. Specifications
Прокат толстолистовой из криогенных сталей. Технические условия
Status: The document is introduced from 01.10.2020. Information about the registration of 368-st from 07/16/2020 (official website of Rosstandart) 10/01/2020
The standard applies to hot-rolled plate made of cryogenic steels intended for the manufacture of cryogenic equipment, systems and installations subordinate to Rostekhnadzor.
Стандарт распространяется на горячекатаный толстолистовой прокат из криогенных сталей, предназначенный для изготовления подведомственных Ростехнадзору элементов криогенного оборудования, систем и установок.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/16/2020
SKU: RUSS380502
National keywords: методы испытаний, технические требования, маркировка, упаковка, транспортирование, хранение, правила приемки, гарантии изготовителя, сортамент, листы, толстолистовой прокат, криогенные стали, нержавеющие стали аустенитного класса, легированные специальные стали, остаточная магнитная индукция.;
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 11098-75: Gauge callipers with reading arrangement. Specifications
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium
GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium
GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 14019-2003: Metallic materials. Bend test method
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 1497-84: Metals. Methods of tension test
GOST 166-89: Vernier callipers. Specifications
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19903-2015: Hot-rolled sheet. Range
GOST 21957-76: Cryogenic engineering. Terms and definitions
GOST 2216-84: Adjustable smooth snap gauges
GOST 2246-70: Welding steel wire. Specifications
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 22848-77: Metals. Method for testing the impact strength at temperature from -100 up to -269 °C
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 33439-2015: Metal products, ferrous metals and alloys on iron-nickel and nickel-based. Heat treatment terms and definitions
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 6032-2017: Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion
GOST 6507-90: Micrometers. Specifications
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R ISO 10153-2011: Steel. Determination of boron content. Curcumin spectrophotometric method
GOST R ISO 148-1-2013: Metallic materials. Charpy pendulum impact test. Part 1.Test method
GOST R ISO 4967-2015: Steel. Determination of content of non-metallic inclusions. Micrographic method using standard diagrams
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.