GOST R 58937-2020
ГОСТ Р 58937-2020
|
|
A decorative and protective finishing layer made of piece materials for facade thermal insulation composite systems with external plaster layers. Specifications
Слой финишный декоративно-защитный из штучных материалов для фасадных теплоизоляционных композиционных систем с наружными штукатурными слоями. Технические условия
Status: The document is introduced from 01/01/2021. Information on registration of 412-st from 07/28/2020 (official website of Rosstandart) 01/01/2021
The standard applies to decorative and protective finishing layers made of artificial piece materials of factory (industrial) production (in the form of tiles of various formats), which are part of the facade thermal insulation composite systems with external plaster layers (SFTK) and a decorative protective layer of piece materials, used for thermal insulation of enclosing wall structures from the outside of capital construction projects up to 75 m high (from the blind area level) during new construction, reconstruction and major repairs.
Стандарт распространяется на декоративно-защитные финишные слои, выполненные из искусственных штучных материалов заводского (промышленного) изготовления (в форме плиток различного формата), входящие в состав фасадных теплоизоляционных композиционных систем с наружными штукатурными слоями (СФТК) и декоративно-защитным слоем из штучных материалов, применяемые при утеплении ограждающих стеновых конструкций с наружной стороны объектов капитального строительства высотой до 75 м (от уровня отмостки) при новом строительстве, реконструкции и капитальном ремонте.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/28/2020
SKU: RUSS380527
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.99 Other building materials »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.99 Other building materials »
The Document is Replaced With:
GOST R 58937-2023: Facade thermal insulation composite systems with decorative and protective finishing layer made of piece materials. General technical conditions
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 13996-2019: Ceramic tiles. General specifications
GOST 15588-2014: Polystyrene insulating slabs. Specifications
GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness
GOST 28013-98: Mortars. General specifications
GOST 31251-2008: Facades of buildings. Fire hazard test method
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31814-2012: Conformity assessment. General sampling rules for products testing during attestation assessment
GOST 33739-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Classification
GOST 33740-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST R 12.0.001-2013: Occupational safety standards system. Basic rules
GOST R 54359-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 55225-2017: Reinforcing, alkali-resistant meshes of glass fibre for building-faces. Specifications
GOST R 55412-2018: Facade’s thermo-insulation composite systems with external plaster layers. Test methods
GOST R 55936-2018: Polymer-cement base adhesives, base coats and patching putties for faсade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 56387-2018: Dry construction glue mixtures on cement binder. Technical conditions
GOST R 56707-2015: Facade’s thermo insulation composite systems with external mortar layers. General specifications
GOST R 57141-2016: Ceramic granite plates. Specifications
GOST R 58271-2018: Dry rubbing mixes. Technical conditions
GOST R 58359-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Technical specifications
GOST R 58388-2019: Composite facade systems with exterior plaster layers. Conformity assessment
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
The Document is Referenced By:
GOST R 70309-2022: Grouting compositions for the finishing decorative and protective layer of piece materials for facade thermal insulation composite systems with external plaster layers. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.