On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
Об утверждении Федеральных норм и правил в области промышленной безопасности "Правила промышленной безопасности опасных производственных объектов, на которых используется оборудование, работающее под избыточным давлением" (с изменениями на 12 декабря 2017 года) (отменен с 01.01.2021 на основании постановления Правительства Российской Федерации от 06.08.2020 N 1192)
Status: Not effective - Canceled
Registered in the Ministry of Justice of the Russian Federation on May 19, 2014, registration No. 32326.
Зарегистрировано в Минюсте РФ 19.05.2014, регистрационный № 32326.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rostekhnadzor,
3/25/2014
SKU: RUSS381914
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.14. Equipment operating under excess pressure of more than 0.07 megapascals or at a water heating temperature of more than 115 degrees Celsius »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.6 For cryogenic media »
Standards for pipe fittings (TPA) »
14. Operation and repair of injection molding machines »
14.4 Diagnostics, resource assessment and life extension »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.8 For transport »
3.8.2 For tank wagons, tank trucks and containers »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.5 For chemical, petrochemical and related industries »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.2 For thermal power »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.4 For pipeline transport of oil and gas »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.3 For oil industry »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.2 For gas industry »
Standards for pipe fittings (TPA) »
1. Fundamental standards for injection molding machines »
1.3 Reliability and safety »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.6 Industrial safety requirements for pressure equipment »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
1 General industrial safety requirements for operation of a hazardous production facility »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.12 Safety requirements when working with compressors and pressure vessels »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.30 Boilers and heat exchangers »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.65 Water heating equipment »
The Document is Replaced With:
Order 536: On approval of federal norms and rules in the field of industrial safety "Industrial safety rules when using equipment operating under excess pressure"
As a Replacement Of:
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants
The Document References:
Federal Law 190-FZ: About heat supply
GOST 23172-78: Steam and hot-water stationary boilers. Terms and definitions
GOST R 54974-2012: Stationary steam and hot-water boilers and heat recovery steam generators. Terms and definitions
Order 102: On approval of lists of issues to be applied by certification bodies (certification organizations) to verify the conformity of knowledge, skills and attestations of certified persons with the requirements of the legislation of the Russian Federation on transport safety
Order 102: On approval of the Program of preventive measures aimed at preventing violations of mandatory requirements, compliance with which is assessed by Roshydromet in the course of control (supervision), and the Schedule of preventive measures of Roshydromet aimed at preventing violation of mandatory requirements, in 2019
Order 490: Federal norms and rules in the field of industrial safety "Basic requirements for non-destructive testing of technical devices, buildings and structures at hazardous production facilities"
Order 538: Federal norms and rules in the field of industrial safety "Safety rules in the production of vegetable oils by pressing and extraction"
Order 538: On approval of the standards for the placement of post offices and other postal facilities of the joint-stock company "Russian Post"
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-440-02: Attestation rules for nondestructive inspection personnel
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants
RD 03-19-2007: Regulations on the organization of work on the training and certification of specialists of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision
RD 03-20-2007: Regulations on the organization of training and knowledge testing of workers of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 03-606-03: Instructions for visual and measuring control
RD 10-577-03: Typical instruction for metal control and extend the life of the main elements of boilers, turbines and pipelines of thermal power stations. Serie 10. Output 30.
Resolution 1192: On recognizing as invalid some normative legal acts and certain provisions of normative legal acts of the Government of the Russian Federation, on the abolition of some normative legal acts and certain provisions of normative legal acts of federal executive bodies containing mandatory requirements, compliance with which is assessed when carrying out control measures in the implementation of federal state supervision in the field of industrial safety and state mining supervision, and recognition of the Instruction on observation of deformations of sides, slopes of benches and dumps in open pits and development of measures to ensure their stability, approved by the State Committee for Supervision of Safe Work in industry and mining supervision under the Council of Ministers of the USSR on July 21, 1970
Resolution 401: On the introduction of a temporary quantitative restriction on the import of ozone-depleting substances into the territory of the Russian Federation
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
The Document is Referenced By:
Directive 1583/r: On approval of the Standard technological process of work of the mechanized distance of loading and unloading works and commercial operations
GOST 10157-2016: Gaseous and liquid argon. Specifications
GOST 20448-2018: Fuel liquefied hydrocarbon gases for domestic use. Specifications
GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods
GOST 27614-2016: Cement carriers. General specifications
GOST 30732-2020: Steel pipes and fittings with thermal insulation from polyurethane foam with a protective sheath. Specifications
GOST 34069-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Control and testing
GOST 8.472-2013: State system for ensuring the uniformity of measurements. Piezosorption hygrometers. Verification procedure
GOST 8.616-2013: State system for ensuring the uniformity of measurements. Laboratory and stream chromatographs for control of component composition Liquefied hydrocarbon fuel gases. The method of verification
GOST 8.617-2013: State system for ensuring the traceability of measurements. Non-dispersive infrared (NDIR) gas analysers for determination of carbon monoxide in the vapour phase of cigarette smoke. The method of verification
GOST 8.618-2013: State system for ensuring the traceability of measurements. Gas analysers and gas alarm devices for determination of combustible gases and vapours in working zone air. Verification procedure
GOST R 113.38.01-2019: The best technology available. Small boiler rooms. Standard rules
GOST R 52087-2018: Fuel liquefied hydrocarbon gases. Specifications
GOST R 55260.3.1-2013: Hydro power plants. Part 3-1. Hydraulic turbines. Procurement specification
GOST R 56218-2014: The automobile vehicles working on compressed natural gas. Cryogenic power supply systems. Technical requirements and test methods
GOST R 56501-2015: Services of housing maintenance, public utilities and administration of apartment buildings. Services content in-house heating systems, heating and hot water supply of apartment houses. General requirements
GOST R 56834-2015: Combustible natural gas. Determination of oxygen content
GOST R 56878-2016: Liquefied natural gas fuelled locomotives. Requirements for operation management
GOST R 56916-2016: Natural combustible gas. Determination of water vapours content by Karl Fisher method
GOST R 57052-2016: Mining equipment. Automatic fire fighting systems (for mining). General technical requirements and test methods
GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process
GOST R 57181-2016: Thermite welding of rails. Technological process
GOST R 57413-2017: Combustible natural gas. State reference materials on the basisd magistral gas. Specification
GOST R 57528-2017: Equipment for diving. Diving breathing apparatus with a half breath scheme. General technical requirements
GOST R 57851.1-2017: Gas-condensate mixture. Part 1. Separation gas. Compositional analysis by gas chromatography method
GOST R 57851.2-2017: Gas-condensate mixture. Part 2. Unstable gas condensate. Compositional analysis by gas chromatography method with preliminary sample degasification
GOST R 57851.3-2017: Gas-condensate mixture. Part 3. Unstable gas condensate. Compositional analysis by gas chromatography method without preliminary sample degasification
GOST R 57895-2017: Equipment for radial acceleration dispersal. General requirements
GOST R 57897-2017: Units for ceramic core’s removal. General requirements
GOST R 57975.2-2017: Аssociated oil gas. Determination of composition by gas chromatography. Part 2. Determination of sulfur compounds using flame photometric detector
GOST R 58176-2018: Electric industry. Energy construction. Organisation of commissioning of thermal power plants. General requirements
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58329-2018: Rules for the operation of main condensate pipelines and product pipelines
GOST R 58367-2019: Arrangement of oil fields on land. Technological design
GOST R 58383-2019: Fire fighting equipment. Caterpillar fire engines. Classification. General technical requirements. Test methods
GOST R 58451-2019: Medical Products. Technical service. Key Points
GOST R 59066-2020: Main pipeline transportation of oil and oil products. Pressure wave smoothing systems for main oil pipelines and oil product pipelines. General specifications
GOST R 59136-2020: Main pipeline transportation of oil and oil products. Welding materials. General specifications
GOST R 8.1004-2021: State system for ensuring the uniformity of measurements (GSI). Systems for measuring the quantity and parameters of oil and oil-gas-water mixtures and measuring installations. Metrological and technical requirements
GOST R 8.776-2011: State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas Mixtures. General metrological and technical requirements
GOST R 8.912-2016: State system for ensuring the uniformity of measurements. Measuring instruments for anesthetic gases. Verification procedure
GOST R 8.916-2016: State system for ensuring the uniformity of measurements. Permeation tubes for Sulfur Dioxide, Hydrogen Sulfide, Nitrogen Dioxide, Chlorine, Hydrogen Chloride, Ammonia. Verification method
GOST R 8.918-2016: State system ensuring the uniformity of measurements. Reference materials refinery gases. General metrological and technical requirements
GOST R 8.919-2016: State system for ensuring the uniformity of measurements. Reference systems for certification reference materials composition of magistral natural gas and substitute natural gas. The method of verification
GOST R 8.920-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Nitrogen oxide, Nitrogen dioxide, Hydrogen sulfide, Sulfur dioxide, Ammonia. Procedure of determining the metrological characteristics
GOST R 8.921-2016: State system for ensuring the uniformity of measurements. Certified reference materials of natural gas magistral and substitute natural gas. Procedure of determining the metrological characteristics
GOST R 8.923-2016: State system for ensuring the uniformity of measurements. Gas generators vapor ethanol in the air. Verification procedure
GOST R 8.924-2016: State system for ensuring the uniformity of measurements. Ozone analyzers. Verification procedure
GOST R 8.925-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics
GOST R 8.926-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with halocarbons. Procedure of determining the metrological characteristics
GOST R 8.932-2017: State system for ensuring the uniformity of measurements. Requirement to methodologies (to the methods) of measuring in area of uses of nuclear-power. Substantive provisions
GOST R 8.958-2019: State system for ensuring uniformity of measurements. The best technology available. Automatic measuring systems for controlling harmful industrial emissions. Test Methods and Tools
GOST R 8.959-2019: State system for ensuring uniformity of measurements. The best technology available. Automatic measuring systems for controlling harmful industrial emissions. Verification Method
GOST R 8.968-2019: State system for ensuring uniformity of measurements. Signaling devices for flammable gases and vapors of flammable liquids without reading device. Verification Method
GOST R 8.975-2019: State system for ensuring the uniformity of measurements. Sources of microflows of gases and vapors. General specifications
GOST R 8.976-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition of calibration gas mixtures. General specifications
Letter 09-00-06/11483: On industrial safety requirements
Letter 09-00-06/12099: About piping requirements
Letter 09-00-06/5410: On the application of regulatory documents
Manual: Manual for impulse and low consumption fire extinguishing systems
MP 242-1711-2017: State system for ensuring the uniformity of measurements. Analyzers of ethanol vapor in exhaled air Alcotest 5510, Alcotest 6820. Verification procedure
MP 242-1827-2014: State system for ensuring the uniformity of measurements. Gas analyzers stationary optical SGOES modifications SGOES-2, SGOES-M-2, SGOES-M11-2. Verification Method
MP 242-1981-2015: State system for ensuring uniformity of measurements. Gas analyzers ANKAT-7664Mikro. Method of verification
MP 242-2139-2017: State system for ensuring uniformity of measurements. Combustion detectors RGDCO0MP1. Verification Method
MP 242-2140-2017: State system for ensuring uniformity of measurements. Gas detectors SY series. Verification Method
MP 242-2299-2019: State system for ensuring the uniformity of measurements. Generators of gas mixtures MGC101 of modifications MGC101, MGC101P. Verification method
MP 242-2326-2019: State system for ensuring the uniformity of measurements. Portable single-channel gas analyzers Tango TX1. Verification method
MP 242-2342-2019: State system for ensuring the uniformity of measurements. BETA series signaling devices for carbon monoxide and combustible gases. Verification method
MUK 4.1.3374-16: Determination of residual amounts of cyflufenamid in water and soil by the method of capillary gas-liquid chromatography
MUK 4.1.3405-16: Determination of residual amounts of flucarbazone-sodium in sunflower seeds and oil by high performance liquid chromatography
MUK 4.1.3411-16: Determination of residual amounts of boscalid in green mass, sugar beet roots, peas, corn, soybean and vegetable oil using capillary gas-liquid chromatography
MUK 4.1.3440-17: Determination of residual amounts of 2,4-D acid in milk, eggs and offal of mammals by chromatographic methods
MUK 4.1.3442-17: Measurement of concentrations of cyflufenamide in atmospheric air of populated areas using capillary gas-liquid chromatography
MUK 4.1.3444-17: Determination of residual amounts of thiamethoxam and its metabolite of clothianidin in bananas, citrus fruits, tea and coffee beans by high performance liquid chromatography
MUK 4.1.3446-17: Measurement of fipronil concentrations in the atmospheric air of populated areas using capillary gas-liquid chromatography
MUK 4.1.3451-17: Measurement of chlorothalonil concentrations in the atmospheric air of populated areas by capillary gas-liquid chromatography
MUK 4.1.3454-17: Determination of residues of sedaxane in water, soil, grain and straw of cereal crops by high performance liquid chromatography
MUK 4.1.3455-17: Determination of residual amounts of dicamba in soybean seeds and oil by capillary gas-liquid chromatography
MUK 4.1.3456-17: Determination of residues of diphenoconazole in cucumbers by capillary gas-liquid chromatography
MUK 4.1.3457-17: Measurement of concentrations of zoxamide in the air of the working area, atmospheric air of populated areas and flushing from the skin of the operators by capillary gas-liquid chromatography
MUK 4.1.3458-17: Measurement of metazachlor concentrations in atmospheric air of populated areas using capillary gas-liquid chromatography
MUK 4.1.3460-17: Measurement of the concentrations of piraflufen-ethyl in the air of the working area, the atmospheric air of populated areas and washouts of the covers of operators by capillary gas-liquid chromatography
MUK 4.1.3461-17: Measurement of phenoxycarb concentrations in the atmospheric air of populated areas by capillary gas-liquid chromatography
MUK 4.1.3478-17: Measurement of the content of volatile N-nitrosoamines (N-nitrosodimethylamine, N-nitrosodiethylamine) in dairy products (cereals for children) by chromato-mass spectrometric method
MUK 4.1.3479-17: Measurement of mass concentrations of N-nitrosoamines (N-nitrosodimethylamine, N-nitrosodiethylamine) in blood by capillary gas chromatography
MUK 4.1.3482-17: Measurement of the mass concentration of vitamin K1 in serum by high performance liquid chromatography (HPLC)
MUK 4.1.3484-17: Determination of phthalates (dimethyl phthalate, diethyl phthalate, dimethyl terephthalate, dibutyl phthalate, di (2-ethylhexyl) phthalate, dioctyl phthalate) in alcoholic products by chromatography-mass spectrometry
MUK 4.1.3489/1-17: Determination of residual amounts of fipronil and its metabolite fipronil sulfone in dry egg food products, eggs, meat and poultry by-products by capillary gas-liquid chromatography
MUK 4.1.3495-17: Measurement of the concentrations of iprovalicarba in the air of the working zone, the atmospheric air of populated areas and flushing from the skin of the operators by capillary gas-liquid chromatography
MUK 4.1.3498-17: Measurement of propisochlor concentrations in the atmospheric air of populated areas by capillary gas-liquid chromatography
MUK 4.1.3500-17: Measurement of the concentrations of aclonifen in the air of the working area, the atmospheric air of populated areas and flushing from the skin of the operators by capillary gas-liquid chromatography
MUK 4.1.3501-17: Determination of residual amounts of acibenzolar-C-methyl in lettuce, melon, tomatoes by high performance liquid chromatography
MUK 4.1.3504-17: Determination of residues of fluxapiroxade in citrus fruits, stone fruits (nectarines, peaches), strawberries, bananas, tomatoes, eggplant, lettuce, leek, soybean (beans, butter), cotton (seeds, butter), rice, coffee using the highly effective method liquid chromatography
MUK 4.1.3506-17: Measurement of concentrations of active substances of pesticides of the class of neonicotinoids in urine
MUK 4.1.3507-17: Measurement of triticonazole concentrations in the atmospheric air of populated areas by capillary gas-liquid chromatography
MUK 4.1.3508-17: Measurement of the concentration of propaquizaphop in the atmospheric air of populated areas by capillary gas-liquid chromatography
MUK 4.1.3509-17: Determination of residual amounts of timbotrione in water, soil, grain, oil and green mass of corn by high performance liquid chromatography
MUK 4.1.3510-17: Determination of residual amounts of azoxystrobin and its metabolite Z-azoxystrobin in the tops and roots of sugar beets by high performance liquid chromatography
MUK 4.1.3511-17: Determination of Clothianidin Residues in Pea Grain, Cabbage, Tomatoes and Tomato Juice, Stone Fruits and Juice, Berries and Black Currant Juice by High Performance Liquid Chromatography
MUK 4.1.3512-17: Determination of residual diflubenzuron in berries and grape juice by high performance liquid chromatography
MUK 4.1.3513-17: Determination of glyphosate residues in the green mass of plants, grain and straw of cereal crops, pea grain, corn grain, sunflower seeds, rapeseed, flax, soybeans, vegetable oil, fruits and juice of fruit seeds and fruit stones, berries and grape juice by the highly effective method liquid chromatography
MUK 4.1.3514-17: Determination of residual amounts of kasugamycin in cabbage, tomatoes and tomato juice, fruit and apple juice by high performance liquid chromatography with mass spectrometric detection
MUK 4.1.3588-19: Measurement of the content of N-nitrosoamines (N-dimethylnitrosoamine, N-methylethylnitrosoamine, N-diethylnitrosoamine, N-dipropylnitrosoamine, N-dibutylnitrosoamine, N-piperidine nitrosoamine) in food products (canned meat, meat and vegetable) by chromatography-mass spectrometry
Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"
Order 1013: Rules for the organization of maintenance and repair of electric power facilities
Order 124n: The procedure for conducting a preventive medical examination and clinical examination of certain groups of the adult population
Order 124n: The procedure and terms for conducting preventive medical examinations of citizens in order to detect tuberculosis
Order 233: About the Interdepartmental Commission for ensuring the preparation of a revised partial application for the establishment of the external border of the continental shelf of the Russian Federation in the Arctic Ocean, support and protection when considering it in the Commission on the Limits of the Continental Shelf
Order 310n: Labor protection rules for placement, installation, maintenance and repair of technological equipment
Order 421: Establishment of restrictions on fishing for muksun in the Yenisei Gulf of the Kara Sea in 2018
Order 421n: On the approval of the professional standard "Assembler of electronic devices"
Order 425n: On the approval of the professional standard "Worker for the repair of steam and gas turbine equipment of a thermal power plant"
Order 442n: On the approval of the professional standard "Operator of compressor units"
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
Order 500: Federal norms and rules in the field of industrial safety "Safety rules for the production and consumption of air separation products"
Order 500: On approval of the Federal norms and rules in the field of industrial safety "Safety rules for chemically hazardous production facilities"
Order 538: Federal norms and rules in the field of industrial safety "Safety rules in the production of vegetable oils by pressing and extraction"
Order 538: On approval of the standards for the placement of post offices and other postal facilities of the joint-stock company "Russian Post"
Order 542n: On the approval of the professional standard "The operator of a pumping station for pumping a working agent into the reservoir"
Order 550n: On the approval of the professional standard "Specialist in mechanization, automation and robotization of technological equipment and processes in the food and processing industry"
Order 559: On the approval of the set of rules SP 10.13130 "Fire protection systems. Internal fire-fighting water supply. Norms and design rules"
Order 599: On the establishment of a fishing limit for rapana in the Sea of Azov in 2019
Order 634n: On the approval of the professional standard "Compound Pouring in the Rocket and Space Industry"
Order 642n: On the approval of the professional standard "Operator for the production of oil, gas and gas condensate"
Order 643n: On the approval of the professional standard "Worker for the repair of equipment in boiler rooms and dust preparation shops of a thermal power plant"
Order 652n: On approval of the Rules for labor protection during the operation of railway infrastructure facilities
Order 76n: On the approval of the Rules for labor protection in agriculture (as amended on July 4, 2018) (invalidated from 01/01/2021 on the basis of the order of the Ministry of Labor of Russia dated October 27, 2020 N 746n)
Order 78n: On determining the Procedure for making a preliminary decision on the origin of goods
PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications
PNST 369-2019: Mining engineering. Mining Explosion Systems. General technical requirements
POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
POT RZhD 4100612-TsSh-074-2015: Rules for labor protection during maintenance and repair of signaling, centralization and blocking devices at Russian Railways
RD 52.04.836-2015: Mass concentration of volatile chlorocarbons in atmospheric air. Measurement procedure by high-performance capillary gas chromatography using headspace analysis
RD 52.04.837-2015: Mass concentration of volatile aromatic hydrocarbons in atmospheric air. Measurement procedure by high-performance capillary gas chromatography using headspace analysis
RD 52.04.838-2015: Mass concentration of volatile aromatic hydrocarbons in atmospheric air. Measurement procedure by gas chromatography using headspace analysis
RDI 26-15-80: Instructions for making inner vessels of isothermal tanks for liquefied carbon dioxide
Resolution 1192: On recognizing as invalid some normative legal acts and certain provisions of normative legal acts of the Government of the Russian Federation, on the abolition of some normative legal acts and certain provisions of normative legal acts of federal executive bodies containing mandatory requirements, compliance with which is assessed when carrying out control measures in the implementation of federal state supervision in the field of industrial safety and state mining supervision, and recognition of the Instruction on observation of deformations of sides, slopes of benches and dumps in open pits and development of measures to ensure their stability, approved by the State Committee for Supervision of Safe Work in industry and mining supervision under the Council of Ministers of the USSR on July 21, 1970
SP 120.13330.2012: Subway systems
SP 158.13330.2014: Buildings and rooms for health care facilities. Design rules
SP 253.1325800.2016: High-rise buildings utilities
SP 263.1325800.2016: Adaptation of subways under the protective constructions of civil defense. General rules of design
SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device
SP 30.13330.2016: Domestic water supply and drainage systems in buildings
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 315.1325800.2017: Thermal networks laid in a ground. Design rules
SP 319.1325800.2017: Buildings and premises of medikal institutions. The rules of operation
SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling
SP 33.13330.2012: Steel pipelines strength analysis
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 373.1325800.2018: Independent heat supply sources. Design rules
SP 393.1325800.2018: Pipelines trunk and field for oil and gas. Organization of construction production
SP 43.13330.2012: Structures for industrial installations
SP 73.13330.2016: Internal sanitary-technical systems
SP 89.13330.2016: Boiler installations
ST TsKBA 008-2014: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage
ST TsKBA 022-2005: General industrial pipeline valves supplied to nuclear power plants. General technical requirements
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.