On the approval of the Procedure for conducting mandatory preliminary and periodic medical examinations of employees, provided for in part four of Article 213 of the Labor Code of the Russian Federation, a list of medical contraindications to work with harmful and (or) hazardous production factors, as well as work in which mandatory preliminary and periodic medical examinations
Об утверждении Порядка проведения обязательных предварительных и периодических медицинских осмотров работников, предусмотренных частью четвертой статьи 213 Трудового кодекса Российской Федерации, перечня медицинских противопоказаний к осуществлению работ с вредными и (или) опасными производственными факторами, а также работам, при выполнении которых проводятся обязательные предварительные и периодические медицинские осмотры
Status: The document is enacted from 01.04.202101.04.2021
Registered in the Ministry of Justice of the Russian Federation on January 29, 2021, registration number 62277.
Зарегистрировано в Минюсте РФ 29.01.2021, регистрационный № 62277.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Health of Russia,
1/28/2021
SKU: RUSS382607
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulatory documents »
Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
I Legal and organizational basis of labor protection »
2 Labor Safety Management »
2.1 The main provisions of public administration of labor »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
The Document References:
Code 197-FZ: Labor Code of the Russian Federation
Federal Law 323-FZ: On the basics of protecting the health of citizens in the Russian Federation
Federal Law 426-FZ: On a special assessment of working conditions
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
Federal Law 68-FZ: Protection of the Public and Territories from Natural and Manmade Emergencies
Order 988n/1420n: On approval of the list of harmful and (or) hazardous production factors and work, in the performance of which mandatory preliminary medical examinations are carried out upon admission to work and periodic medical examinations
Resolution 608: Regulations on the Ministry of Health of the Russian Federation
The Document is Referenced By:
Decree 4: Sanitary and Epidemiological Requirements for the Prevention of Infectious Diseases
GOST R 70357-2022: Sand and gravel material from friable rocks for the production of sand, sand and gravel mix, gravel and crushed stone. General technical conditions
GOST R 70708-2023: Pyrolysis liquid products. Pyrolysis light tar. Technical conditions
Letter 15-2/OOG-2831: Concerning the performance of obligatory preliminary medical examinations for employment
Letter 28-4/3042221-3576: On the peculiarities of mandatory medical examinations of employees
Order 113n: On approval of the professional standard "Cook"
Order 143n: On approval of the professional standard "Specialist of departmental security of oil and gas industry facilities
Order 144n: On approval of the professional standard "Specialist in the organization of the operation of overhead and cable municipal power lines
Order 145n: On approval of the professional standard "Operator of gravure printing equipment
Order 149n: On approval of the professional standard "Screen printing equipment operator
Order 159n: On the approval of the professional standard "Operator of training and competitive processes using electronic and technical devices"
Order 15n: On approval of the professional standard "Worker in diagnosing the condition of rails and railroad track switches".
Order 166n: On the approval of the professional standard "Process Engineer of Cement Production"
Order 20: On Approval of Forms of Checklists (Lists of Checklists) for Federal State Control (Oversight) of Compliance with Labor Laws and Other Regulatory Legal Acts Containing Norms of Labor Law
Order 20: On approval of the form of the checklist (a list of control questions, the answers to which indicate compliance or non-compliance of the controlled person with mandatory requirements) used by the Federal Medical and Biological Agency, its territorial bodies and its federal state institutions in conducting planned control (surveillance) activities (raid inspections, on-site inspections) in the implementation of the federal state sanitary and epidemiological control (supervision) over compliance with mandatory requirements
Order 20-test: On Approval of Forms of Checklists (Lists of Checklists) for Federal State Control (Oversight) of Compliance with Labor Laws and Other Regulatory Legal Acts Containing Norms of Labor Law
Order 216n: On the approval of the professional standard "Inspector for train traffic safety"
Order 226n: On Approval of the Professional Standard "Locomotive Control and Maintenance Worker
Order 236n: On approval of the professional standard "Specialist in the analysis and diagnosis of technological complexes of mechanical assembly production
Order 241n: On the approval of the professional standard "Specialist in the maintenance and operation of diesel and refrigeration units, refrigerated rolling stock, railway transport wagons"
Order 253n: On the approval of the professional standard "Specialist in diagnostics of equipment for oil and oil products trunk pipelines"
Order 260n: On the approval of the professional standard "Adjuster-installer of electronic modules of diagnostic and test equipment"
Order 270n: On the approval of the professional standard "Electromechanic for the maintenance and repair of safety devices (systems) and radio communications for railway rolling stock"
Order 347n: On the approval of the professional standard "Specialist in the field of medical optics and optometry"
Order 350n: On approval of the professional standard “Specialist in technical re-equipment, reconstruction and modernization of foundry production”.
Order 368n: Approval of the professional standard “Specialist in Adjustment and Testing of Technological Equipment of Mechanical Assembly Production”.
Order 369n: On approval of the professional standard "Electrode Product Presser
Order 370n: On approval of the standard of medical care for adults with supraventricular tachycardias (diagnosis, treatment and follow-up)
Order 370n: On approval of the professional standard "Metal and alloys presser
Order 372n: Approval of the professional standard “Fitting and lapping fitter”.
Order 373n: Approval of the professional standard “Wood loader (wood loader) operator”.
Order 377n: On the approval of the professional standard "Chemical Analysis Worker of a Thermal Power Plant"
Order 385n: Approval of the professional standard “Scaffolding and scaffolding erector”.
Order 389n: Approval of the professional standard “Specialist in the introduction of new equipment and technologies in thermal production”.
Order 390n: On approval of the professional standard "Work and rest organization employee of locomotive crews, refrigerator section crews, conductors of passenger cars".
Order 391n: On approval of the professional standard "Blast furnace operator"
Order 393n: On the approval of the professional standard "Lost wax molder"
Order 396n: On the approval of the professional standard "Operator of a mobile bitumen-smelting plant"
Order 397n: On the approval of the professional standard "Specialist in the operational management of mechanical assembly production"
Order 398n: About the approval of the professional standard "Collector of forms"
Order 409n: Approval of the professional standard “Specialist in Design and Construction of Spacecraft Power Plants”.
Order 417n: On approval of the professional standard “Grinding Machine Tool Operator”.
Order 51n: On Approval of the Professional Standard "Conveyor Operator of Coal Mining Enterprises
Order 51n: On approval of the standard of medical care for adults with heel bone fractures (diagnosis, treatment and follow-up)
Order 528n: On approval of the professional standard "Marker"
Order 534n: On approval of the professional standard "Worker for comprehensive cleaning of the territory belonging to the common property in an apartment building".
Order 535n: On Approval of the Professional Standard "Forestry Worker"
Order 544n: On approval of the professional standard "Chopper"
Order 545n: On approval of the professional standard "Specialist for quality control of oil, gas, gas condensate and refined products
Order 547n: On approval of the professional standard "Trawler
Order 54n: On approval of the professional standard "sinker"
Order 563n: On Approval of the Professional Standard "Turner-Revolver"
Order 564n: Approval of the professional standard "Rotary Forging Machine Operator
Order 565n: On approval of the professional standard "Specialist in warehouse logistics of chemical and biotechnological products
Order 567n: On approval of the professional standard "Specialist in the field of bioenergy technology
Order 621n: On approval of the professional standard "Carousel Turner"
Order 62n: On approval of the professional standard "Specialist in the selection, installation and maintenance of rehabilitation products
Order 645n: On approval of the professional standard "Expert-Assessor of Departmental Acceptance in the Rocket and Space Industry".
Order 646n: On approval of the professional standard "Onboard control system electronics specialist for unmanned spacecrafts".
Order 647n: On approval of the professional standard "Specialist in the development of equipment for on-board space systems
Order 649n: On approval of the professional standard "Specialist in the organization and operational management of production in the rocket and space industry
Order 665n: On approval of the professional standard "Worker of metallic powders production"
Order 668n: Approval of the professional standard "Molten salt electrolyzer"
Order 669n: On approval of the professional standard "Engineer for Rocket and Space Technology Assembly and Testing Processes"
Order 670n: On approval of the professional standard "Logging machine operator"
Order 704n: On approval of the professional standard "Adjuster of electronic equipment of elevators, elevator platforms for the disabled, escalators, passenger conveyors (moving walkways)
Order 710n: On approval of the professional standard "Antenna-mastmaster
Order 716n: On approval of the professional standard "Concrete and metal structures fitter
Order 717n: On approval of the professional standard "Subway station supervisor
Order 719n: On approval of the professional standard "Manufacturer of products, special products from polymer composite materials by laying and winding method in the rocket and space industry".
Order 724n: On Approval of the Professional Standard "Specialist for Operation of External Gas Pipelines of Gas Distribution Systems
Order 733n: On approval of the professional standard "Specialist for Surface Protective Coating Systems of Buildings and Structures of Hazardous Production Facilities
Order 735n: On approval of the professional standard "Operator of external gas pipelines of gas distribution systems
Order 752n: On Approval of the Professional Standard "Excavator Operator
Order 752n: On approval of the professional standard "Engineer for instruments of orientation, navigation and stabilization of aircraft in the rocket and space industry" (as amended on December 12, 2016)
Order 807: On approval of the forms of checklists (lists of control questions, the answers to which indicate compliance or non-compliance of a supervised person with mandatory requirements) used by the Federal Service for Supervision of Consumer Rights Protection and Human Welfare, its territorial bodies and its subordinate federal public institutions in carrying out scheduled control (surveillance) activities (raid inspections, on-site inspections) in the implementation of the federal state sanitary and epidemiological
Order 808: On approval of the forms of checklists (lists of control questions, the answers to which indicate compliance or non-compliance of a supervised person with mandatory requirements) used by the Federal Service for Supervision of Consumer Rights Protection and Human Welfare, its territorial bodies and its subordinate federal public institutions in carrying out scheduled control (surveillance) activities (raid inspections, on-site inspections) in the implementation of the federal state sanitary and epidemiological
Order 973: On approval of forms of checklists (lists of control questions, the answers to which indicate compliance or non-compliance of a supervised person with mandatory requirements) used by the Federal Service for Supervision in Healthcare and its territorial bodies in carrying out federal state control (supervision) of the quality and safety of medical activity
Order VB-1069fs: On approval of the forms of checklists (lists of control questions, the answers to which indicate compliance or non-compliance of a controlled person with mandatory requirements) used by the Federal Transport Oversight Service and its territorial bodies in carrying out federal state control (oversight) on road transport, urban ground electric transport and road facilities
PNST 676-2022: Oil and gas industry. Underwater production systems. Production environment
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
