Decree 294
Постановление 294
|
|
Regulations on the Federal Agency for Technical Regulation and Metrology
Положение о Федеральном агентстве по техническому регулированию и метрологии
Status: Effective. The decision comes into force 7 days after the day of its official publication.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Government of the Russian Federation,
6/17/2004
SKU: RUSS383201
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulatory documents »
Assets, Property »
PromExpert »
SECTION I. TECHNICAL REGULATION »
I Basics of technical regulation »
1 The main provisions of technical regulation »
The Document References:
Resolution 438: On the specifics of the implementation in 2020 of state control (supervision), municipal control and on amending paragraph 7 of the Rules for the preparation by state control (supervision) bodies and municipal control bodies of annual plans for scheduled inspections of legal entities and individual entrepreneurs
The Document is Referenced By:
GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions
GOST R 1.9-2004: Standardization in the Russian Federation. Mark of conformity to national standards of the Russian Federation. Representation. Application order
GOST R 56091-2014: Technical investigation and registration of crashes and incidents at unified and regional gas supply systems’ objects
Letter 15-2/OOG-2265: On appeal (assessment) of decisions of state labor inspectors
Letter 30-44-22: On clarification of the norms of the national standard GOST R 57974-2017
Letter 5024/05-AB: About consideration of the appeal
Letter ASh-9380/03: About the application of OKOF
Order 1026: About the Scientific and Technical Council of the Federal State Unitary Enterprise "All-Russian Research Institute of Metrological Service"
Order 1061: On the determination of the Procedure and conditions for the application of international standards, regional standards, interstate standards and regional codes of practice, as well as standards of foreign states and sets of rules of foreign states
Order 1193: On Amendments to the Regulations of the Federal Agency for Technical Regulation and Metrology, approved by Order of the Federal Agency for Technical Regulation and Metrology of June 18, 2018 N 1228
Order 1228: Regulations of the Federal Agency for Technical Regulation and Metrology
Order 2171: Administrative Regulations of the Federal Agency for Technical Regulation and Metrology of the Federal State Metrological Supervision
Order 2180: On the approval of the State primary standard of the unit of mass - kilogram
Order 2188: Model Provision on the territorial body of the Federal Agency for Technical Regulation and Metrology
Order 2198: On approval of the State primary standard of the unit of temperature in the range from 0 to 3200 ° С
Order 2374: About the procedure for consideration and passage of documents upon accreditation at the Federal Agency for Technical Regulation and Metrology in the field of confirmation of conformity and in the field of ensuring the uniformity of measurements
Order 2514: Administrative Regulations of the Federal Agency for Technical Regulation and Metrology of the state function to exercise state control (supervision) over compliance with the mandatory requirements of national standards and technical regulations
Order 2919: Regulations on the North-West Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2920: Regulations on the Volga Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2921: Regulations on the Central Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2922: Regulations on the Ural Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2923: Regulations on the Siberian Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 2924: Regulations on the Far Eastern Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 3019: On Amendments to the Regulations and Composition of the Standardization Council under the Federal Agency for Technical Regulation and Metrology, approved by Order of the Federal Agency for Technical Regulation and Metrology of December 21, 2016 N 1939
Order 3053: Regulations on the Southern Interregional Territorial Department of the Federal Agency for Technical Regulation and Metrology
Order 332: On approval of the Procedure for the admission of service centers (workshops) to the installation, inspection, maintenance and repair of control devices installed on vehicles (as amended on January 23, 2017) (canceled from 01/01/2021 on the basis of the Decree of the Government of the Russian Federation of October 26 .2020 N 1742)
Order 3320: On amending the order of the Federal Agency for Technical Regulation and Metrology of July 5, 2018 N 1402
Order 342: On approval of the Regulation on the Digital Development Department of Technical Regulation of the Federal Agency for Technical Regulation and Metrology
Order 38: On licensing activities for the manufacture and repair of measuring instruments
Order 3940: About the procedure for consideration and passage of documents upon accreditation at the Federal Agency for Technical Regulation and Metrology
Order 4080: About the procedure for consideration and passage of documents upon accreditation at the Federal Agency for Technical Regulation and Metrology
Order 5147: On approval of the risk indicator of violation of mandatory requirements for federal state metrological control (supervision)
Order 5362: On approval of the list of indicators of risk of violation of mandatory requirements for federal state control (supervision) of compliance with the requirements established by technical regulations for wheeled vehicles (chassis) and components of vehicles (chassis) in circulation (before their operation), motor gasoline, diesel fuel, marine fuel and fuel oil, or mandatory requirements to be applied before the entry into force of technical regulations in accordance with the Federal Law "On
Order 578: On approval of standard additional professional programs in the field of training transport security forces
Order 62: Rules for the use of forests for recreational activities
Order 63: On the approval of the State primary standard of the unit of length - meter
Order 64: On approval of the State primary standard of units of magnetic induction, magnetic flux, magnetic moment and gradient of magnetic induction
Order 65: On approval of regulations on structural units of the Ministry of Agriculture of the Russian Federation
Order 65: On approval of the forms for mandatory provision by the Ministry of Energy of the Russian Federation of information for inclusion in the segment in the field of electric power, heat power, renewable energy sources of the state information system of the fuel and energy complex and requirements for filling out these forms
Order 650: On the establishment of the Procedure for the creation, operation and liquidation of technical committees for standardization, project technical committees for standardization
Order 67: On approval of the State primary standard of the unit of spectral power density of noise radio emission in the frequency range from 0.002 to 178.3 GHz
Order 68: On approval of the State primary standard of units of absorbed dose and absorbed dose rate of photon, electron and proton radiation
Order 69: Additional measures to prevent the spread of coronavirus infection (COVID-19)
Order 757: On the organization of the activities of the Federal Agency for Technical Regulation and Metrology in the licensing of manufacturing and repair of measuring instruments
Order 87: On approval of the State primary standard of units of volumetric activity of radioactive aerosols, radon, thoron and radon flux density
Order 88: About the Certification System in Civil Aviation of the Russian Federation
Order 970: Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments
Order 971: Administrative Regulations on the provision of the Federal Agency for Technical Regulation and Metrology of the state service for the attribution of technical means to measuring instruments
PR 50.1.074-2004: Preparation of draft national standards of the Russian Federation and draft amendments thereto for approval, registration and publication. Amendment of standards and preparation of documents for their abolition
RD RSK 01-2014: Regulations on the Russian Calibration System
Resolution 438: On the specifics of the implementation in 2020 of state control (supervision), municipal control and on amending paragraph 7 of the Rules for the preparation by state control (supervision) bodies and municipal control bodies of annual plans for scheduled inspections of legal entities and individual entrepreneurs
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
