GOST R 27.102-2021
ГОСТ Р 27.102-2021
|
|
Reliability in engineering. Reliability of a facility. Terms and definitions.
Надежность в технике. Надежность объекта. Термины и определения
Status: Accepted
This standard establishes the basic concepts, terms and definitions relating to object reliability. An object can be hardware, software, facilities or combinations of these. The object may include personnel. The terms related to task reliability are given in GOST R 27.101. The terms set forth in this standard are recommended for use in all types of documentation and literature within the scope of standardization works and (or) using the results of these works. Application of terms that are synonyms of standardized terms is not allowed. For some standardized terms in the standard there are brief forms, which are allowed to apply in cases, excluding the possibility of their interpretation, different from that given in this standard. Provisions of this standard are recommended for use by organizations of the Russian Federation, ministries, departments and other organizations located on the territory of the Russian Federation regardless of their form of ownership and subordination, related to the development, production, operation and repair of technical facilities. Appendix A contains explanations of the terms given in this standard
Настоящий стандарт устанавливает основные понятия, термины и определения, относящиеся к надежности объекта. Объектом могут быть аппаратные средства, программное обеспечение, сооружения или их комбинации. Объект может включать в себя персонал. Термины, относящиеся к надежности выполнения задания, приведены в ГОСТ Р 27.101.
Термины, установленные в настоящем стандарте, рекомендованы для применения во всех видах документации и литературы, входящих в сферу действия работ по стандартизации и (или) использующих результаты этих работ.
Применение терминов, представляющих собой синонимы стандартизованных терминов, не допускается.
Для отдельных стандартизованных терминов в стандарте приведены краткие формы, которые разрешается применять в случаях, исключающих возможность их толкования, отличного от приведенного в настоящем стандарте.
Положения настоящего стандарта рекомендованы к применению организациями Российской Федерации, министерствами, ведомствами и иными расположенными на территории Российской Федерации организациями независимо от форм собственности и подчиненности, имеющими отношение к разработке, производству, эксплуатации и ремонту технических объектов.
В приложении А приведены пояснения к терминам, приведенным в настоящем стандарте
Choose Language:
Format: Electronic (pdf/doc)
Approved: Closed Joint Stock Company "Research Center for Control and Diagnostics of Technical Systems" (CJSC "NITs KD"),
1/1/2022
SKU: RUSS428284
National keywords: надежность, безотказность, готовность, долговечность, ремонтопригодность, сохраняемость, показатели надежности, наработка, ресурс, срок службы, нормирование надежности, испытания на надежность, восстановление, резервирование, структура объекта;
The Product is Contained in the Following Classifiers:
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
The Document References:
GOST R 27.101-2021: Reliability in engineering. Reliability of task performance and business continuity management. Terms and definitions
The Document is Referenced By:
GOST 10674-2022: Tank wagons. General specifications
GOST 10935-2022: Covered freight cars. General specifications
GOST 26686-2022: Flatcars. General specifications
GOST 26725-2022: Open wagons. General technical conditions
GOST 30243.2-2024: Covered hopper cars. General technical conditions
GOST 33435-2023: Control, monitoring and safety devices of railway rolling stock. Safety requirements and control methods
GOST 34773-2021: Systems for technical diagnostics and monitoring of high-speed railway lines. General technical requirements
GOST 34881-2022: Trunk pipeline transport of oil and petroleum products. Stationary booms for containment of oil and oil products spills. General technical conditions
GOST 34904-2022: Ship pipeline valves. General specifications
GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities
GOST 34980-2023: Main pipeline transportation of oil and oil products. Converter transformers for voltage 6 and 10 kV. General technical conditions
GOST 35003-2023: Self-contained refrigerator cars. General technical conditions
GOST 35006-2023: Air reservoirs of air braking systems of railroad cars. General technical conditions
GOST 35035-2023: Firefighting technology. Mobile robotic firefighting complexes. Classification. General technical requirements. Test methods
GOST 5973-2022: Dumper cars. General specifications
GOST R 53560-2022: Alarm systems. Power supply sources. Classification. General technical requirements and test methods
GOST R 54828-2022: Complete gas-insulated metal-insulated switchgear (GIS) for rated voltages of 110 kV and above. General specifications
GOST R 55260.2.1-2022: Hydroelectric power plants. Hydrogenerators. Technical requirements for delivery
GOST R 55562-2022: Hydraulic turbines, pump-turbines and pumps of pumped-storage power plants. Evaluation of cavitation erosion. Part 1. Assessment in jet turbines, pump-turbines and pumps of pumped-storage power plants
GOST R 58341.13-2022: Elements of the Control and Management System of Nuclear Power Plants. Accounting of actually worked out and estimation of residual resource
GOST R 59709-2022: Information protection. Computer incident management. Terms and definitions
GOST R 59921.7-2022: Artificial intelligence systems in clinical medicine. Algorithms for medical image analysis. Test methods. General requirements
GOST R 59993-2022: Systems Engineering. System analysis of the system infrastructure management process
GOST R 70120-2022: Civil aviation equipment. Operation according to technical condition. General requirements
GOST R 70236-2022: Pipeline valves. Shut-off valves of thermoplastic materials. General specifications
GOST R 70249-2022: Artificial intelligence systems in road transport. Highly automated vehicles. Terms and definitions
GOST R 70297-2022: Mining equipment. Turbines. General technical requirements and test methods
GOST R 70347-2022: Trunk pipeline transport of oil and petroleum products. Uninterruptible power supplies for auxiliary systems and automation systems. General specifications
GOST R 70348-2022: Trunk pipeline transport of oil and petroleum products. Marine stanchions. General specifications
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
GOST R 70409-2022: Operation of public communication network and sustainable functioning. General requirements
GOST R 70464-2022: Three-axle axle suspension bogies for freight wagons. General specifications
GOST R 70557-2022: Fuel cell-based shipboard electric power systems. Fuel cell batteries. General technical requirements
GOST R 70566-2022: Land reclamation systems and structures. Rules of inspection and monitoring of technical condition
GOST R 70573-2022: Cladding elements, nodes and fastening details of facade hinged ventilated structures. Durability parameters
GOST R 70639-2023: Valves pipeline. Questionnaires
GOST R 70660-2023: Pipeline valves. Reliability assurance in manufacturing
GOST R 71300-2024: Mining equipment. Explosion protection means in gas suction and degassing pipelines and installations. General technical requirements and test methods
GOST R 71438-2024: Information technology. Process Evaluation. A system for measuring processes to assess their capabilities
GOST R 8.1011-2022: State system for ensuring the uniformity of measurements (GSI). Systems for measuring the quantity and quality indicators of crude oil and petroleum products. Commissioning, operation, decommissioning
GOST R IEC 62960-2022: Reliability in engineering. Reliability analysis at life cycle stages
PNST 586-2022: Oil and gas industry. Subsea production systems. Compliance management and reliability assurance
PNST 625-2022: Oil and gas industry. Subsea production systems. Instrumental system of protection against overpressure. Methodical instructions
PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications
PNST 691-2022: Oil and gas industry. Subsea production systems. Foundations and bottom bases. Technical Requirements
PNST 790-2022: Engineering networks of buildings and structures internal. Axial bellows compensators for pipelines of heating, heating and water supply systems. General specifications
SP 260.1325800.2023: Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.