On the Program for the development (amendment, revision) of interstate standards, resulting in the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of machinery and equipment" (TR CU 010/2011), as well as interstate standards that contain rules and methods of research (tests) and measurements, including rules of sampling, necessary for the application and enforcement of the technical regulations of the Customs Union "On safety of machines and equipment" (TR
О Программе по разработке (внесению изменений, пересмотру) межгосударственных стандартов, в результате применения которых на добровольной основе обеспечивается соблюдение требований технического регламента Таможенного союза "О безопасности машин и оборудования" (ТР ТС 010/2011), а также межгосударственных стандартов, содержащих правила и методы исследований (испытаний) и измерений, в том числе правила отбора образцов, необходимые для применения и исполнения требований технического регламента Таможенного союза "О безопасности машин и оборудования" (ТР ТС 010/2011) и осуществления оценки (подтверждения) соответствия продукции (утратил силу с 20.02.2022 на основании решения Коллегии ЕЭК от 18.01.2022 N 11)
Status: Not effective - Superseded
Choose Language:
Format: Electronic (pdf/doc)
Approved: EEC Board,
4/9/2013
SKU: RUSS430772
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
General documents on customs regulation »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Decisions, regulations and lists (to TR CU 010/2011) »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.160 Legislation. Administration »
The Document is Replaced With:
Decision 11: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulation of the Eurasian Economic Union "On Safety of Attractions" (EAEU TR 038/2016), as well as interstate standards containing rules and methods research (testing) and measurements, including sampling rules necessary for the application and implementation of the requirements of the technical regulations of the Eurasian Economic Union "On the safety of attractions" (TR EAEU 038/2016) and the assessment of conformity of objects of technical regulation
The Document References:
Decision 11: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulation of the Eurasian Economic Union "On Safety of Attractions" (EAEU TR 038/2016), as well as interstate standards containing rules and methods research (testing) and measurements, including sampling rules necessary for the application and implementation of the requirements of the technical regulations of the Eurasian Economic Union "On the safety of attractions" (TR EAEU 038/2016) and the assessment of conformity of objects of technical regulation
GOST 10110-87: Circles diamond
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12.2.102-89: Machines and equipment for timber logging and floating, forestry tractors
GOST 12.2.121-88: Occupational safety standards system. Industrial tractors. General safety requirements
GOST 12.2.122-88: Occupational safety standards system. Industrial tractors. Methods for estimation safety
GOST 13785-68: Arbors with tapered shank 7:24 and face keys for shell face cutters. Design and dimensions
GOST 13786-68: Arbors with tapered 7:24 and longitudinal key for shell cutters. Design and dimensions
GOST 16115-88: Diamond segment cut-off wheels of 1a1rss/c1 and1a1rss/c2 forms
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17257-87: Universal one-bucket excavators. Methods for determination of rated volume
GOST 18372-73: Carbide end mills. Specifications
GOST 23833-95: Commercial refrigeration equipment
GOST 25827-93: Tool shanks with 7/24 taper. Dimensions
GOST 26538-85: 7:24 tapered arbours for shell-type face milling cutters for machines with numerical control. Basic dimensions
GOST 26595-85: Face milling cutters with mechanically clamped indexable inserts. Types and basic dimensions
GOST 2679-93: Metal slitting and cutting-off saws
GOST 26860-93: Holders with clamp screw for flatted parallel shank end mills. Dimensions of the driving system of tool shanks
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27253-87: Earth-moving machinery. Service instrumentation
GOST 27534-87: Acoustics. Measurement of airborne noise emitted by earth-moving machinery. Operator's position. Stationary test condition
GOST 27535-87: Earth-moving machinery. Graders. Terminology and commercial specifications
GOST 27536-87: Earth-moving machinery. Tractor-scrapers. Terminology and commercial specifications
GOST 27717-88: Acoustics. Measurement of airborne noise emitted by earth-moving machinery. Method for determining compliance with limits for exterior noise. Stationary test condition
GOST 27718-88: Earth-moving machinery. Service tools. Part 2. Common repair tools. Mechanical pullers and pushers
GOST 27922-88: Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
GOST 27963-88: Earth-moving machinery. Pipe layers. Terminology and commercial specifications
GOST 28282-89: Taper shank adapters 7:24 for cutters with cylindrical shank with flat. Basic dimensions
GOST 28632-90: Earth-moving machinery. Definitions of dimensions and symbols. Part 2. Equipment
GOST 28633-90: Earth-moving machinery. Definitions of dimensions and symbols. Part 1. Base machine
GOST 28634-90: Earth-moving machinery. Operating instrumentation
GOST 28771-90: Earth moving machinery. Tractors with dozer, graders, tractor scrapers. Cutting edges. Principal shapes and basic dimensions
GOST 29291-92: Earth-moving machinery. Hydraulic excavators. Hoe type buckets. Volumetric ratings
GOST 8328-75: Radial short cylindrical roller bearings. Types and boundary dimensions
GOST 8338-75: Single row radial ball bearings. Boundary dimensions
GOST 9305-93: Convex and concave form half-round milling cutters and corner rounding cutters
GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility
GOST EN 12417-2006: Safety of metal-working machine tools. Machining centres
GOST EN 13128-2006: Safety of metal-working machine tools. Milling machines (including boring machines)
GOST ISO 10263-2-2000: Excavating machines. Working space in the operator's cabin. Part 2. Testing of air filter.
GOST ISO 10263-3-2000: Excavating machines. Working space in the operator's cabin. Part 3 Method of the determination of sealability of a cabin.
GOST ISO 10263-4-2000: Excavating machines. Working space in the operator's cabin. Part 4. Method of testing of the systems of ventilation, heating and (or) conditioning.
GOST ISO 10263-5-2000: Excavating machines. Working space in the operator's cabin. Part 5. Test method of defrosting system of cabin's windscreen.
GOST ISO 10263-6-2000: Excavating machines. Working space in the operator's cabin. Part 6. Determination of the action of solar emission to an operator's cabin.
GOST ISO 11545-2004: Agricultural irrigation equipment. Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles. Determination of uniformity of water distribution
GOST ISO 3450-2002: Earth-moving machinery. Braking systems of wheeled vehicles. Efficiency requirements and methods of testing
GOST ISO 5006-1-2000: Excavating machines. Observability of the working space in the operator's cabin. Part 1. Testing Method
GOST ISO 5006-2-2000: Excavating machines. Observability of the working space in the operator's cabin. Part 2. Method of Evaluation
GOST ISO 5006-3-2000: Excavating machines. Observability of the working space in the operator's cabin. Part 3. Criteria
GOST ISO 7714-2004: Agriculture irrigation equipments. Volumetric valves. General technical requirements and test methods
GOST ISO 7749-2-2004: Agricultural irrigation equipment. Rotating sprinklers. Part 2. Uniformity of distribution and test methods
GOST ISO 7914-2002: Machines for forestry. Portable chainsaws. Minimum clearances and dimensions of handles
GOST ISO 7917-2002: Machines for forestry. Bush cutters with gasoline motors. Test methods for sound pressure
GOST ISO 7918-2002: Machines for forestry. Bush cutters with gasoline motors. Safety device for disk blade. Dimensions
GOST ISO 9244-2001: Excavating machines. Safety signs and danger signs. Basic principles
GOST ISO 9260-2004: Agricultural irrigation equipment. Emitters. Technical requirements and test methods
GOST ISO 9261-2004: Agricultural irrigation equipment. Emitting-pipe systems. Technical requirements and test methods
GOST R 50160-92: Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw. Dimensions
GOST R 50761-95: Marine, locomotive and industrial diesels. General safety requirements
GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting
GOST R 53001-2008: Diamond and cubic boron nitride (elbow) tools. Safety requirements
GOST R 53002-2008: End mills with cylindrical, Morse taper and 7:24 taper shanks. Dimensions
GOST R 54454-2011: Machinery for forestry. Winches. Definitions, technical requirements, safety requirements
GOST R ISO 8082-1-2012: Self-propelled machinery for forestry. Roll-over protective structures. Technical requirements and test methods. Part 1. General machines
STB EN 676-2012: Automatic gas burners with forced air supply for combustion
STB EN 710-2004: Safety requirements to foundry machines and installations for making molds and related cores
The Document is Referenced By:
Decision 11: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulation of the Eurasian Economic Union "On Safety of Attractions" (EAEU TR 038/2016), as well as interstate standards containing rules and methods research (testing) and measurements, including sampling rules necessary for the application and implementation of the requirements of the technical regulations of the Eurasian Economic Union "On the safety of attractions" (TR EAEU 038/2016) and the assessment of conformity of objects of technical regulation
Ordinance 535-r: An action plan ("road map") to improve legislation and eliminate administrative barriers in order to ensure the implementation of the National Technological Initiative in the direction of "Autonet"
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
