SP 86.13330.2022
СП 86.13330.2022
|
|
Trunk piping
Магистральные трубопроводы
This code applies to the construction of new and reconstruction of existing main pipelines with nominal diameter up to DN 1400 inclusive with gage pressure over 1,2 to 10,0 MPa inclusive (when laid alone and in technical corridors) designed for transportation of: - oil, oil products (including stable condensate and stable gasoline), natural, petroleum and artificial hydrocarbon gases from the areas of their production (from the field), production or storage to places of consumption (tank farms, transshipment of crude oil, natural gas and synthetic gas).
Настоящий свод правил распространяется на строительство новых, реконструкцию действующих магистральных трубопроводов номинальным диаметром до DN 1400 включительно с избыточным давлением свыше 1,2 до 10,0 МПа включительно (при одиночной прокладке и прокладке в технических коридорах), предназначенных для транспортирования:
- нефти, нефтепродуктов (в т. ч. стабильного конденсата и стабильного бензина), природного, нефтяного и искусственного углеводородных газов из районов их добычи (от промыслов), производства или хранения до мест потребления (нефтебаз, перевалочных баз, пунктов налива, газораспределительных станций, отдельных промышленных и сельскохозяйственных организаций и портов);
- сжиженных углеводородных газов фракций С3 и С4 и их смесей, нестабильного бензина и конденсата нефтяного газа и других сжиженных углеводородов с упругостью насыщенных паров при температуре 40 оС не выше 1,6 МПа из районов их добычи (промыслов) или производства (от головных насосных станций) до места потребления;
- товарной продукции в пределах компрессорной станции, станций подземного хранения газа, дожимной компрессорной станции, газораспределительной станции и узла замера расхода газа
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS432304
The Product is Contained in the Following Classifiers:
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
As a Replacement Of:
SP 86.13330.2014: Main (Trunk) pipelines
The Document References:
Code: Customs Code of the Eurasian Economic Union
Code: Customs Code of the Customs Union
SP 126.13330.2017: Geodetic works in building
SP 24.13330.2021: Pile foundations
SP 245.1325800.2015: Corrosion protection of communication and utility lines and structures in the oil and gas industry. Production and work acceptance rules
SP 246.1325800.2016: Code practice. Regulation on the supervision of authors for construction of buildings and structures
SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88
SP 34.13330.2021: SNiP 2.05.02-85 * Highways
SP 392.1325800.2018: Pipelines trunk and field for oil and gas. Executive documentation during construction. Forms of requirements for maintenance and execution
SP 393.1325800.2018: Pipelines trunk and field for oil and gas. Organization of construction production
SP 410.1325800.2018: Pipelines trunk and field for oil and gas. Permafrost construction and work control
SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities
SP 422.1325800.2018: Pipelines trunk and field for oil and gas. Construction of underwater crossings and work control
SP 424.1325800.2019: Pipelines trunk and field for oil and gas. Corrosion protection works by means of electrochemical protection and work execution control
SP 446.1325800.2019: Engineering and geological surveys for construction. General rules for the production of work
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 77.13330.2016: Systems of automation.
The Document is Referenced By:
GOST R 70524-2022: Land reclamation systems and structures. Rules of acceptance into operation
GOST R 70623-2023: Field pipelines. Pipelines from flexible polymer reinforced pipes. Rules of design, installation and operation
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 285/pr: On approval of SP 86.13330.2022 "SNiP III-42-80* Main Pipelines
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
SP 119.13330.2024: Railroads of 1520 mm gauge
SP 536.1325800.2024: Field pipelines of non-metallic pipes. Design and construction rules
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.