On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
О перечне международных и региональных (межгосударственных) стандартов, а в случае их отсутствия - национальных (государственных) стандартов, в результате применения которых на добровольной основе обеспечивается соблюдение требований технического регламента Таможенного союза "О безопасности оборудования, работающего под избыточным давлением" (ТР ТС 032/2013), и перечне международных и региональных (межгосударственных) стандартов, а в случае их отсутствия - национальных (государственных) стандартов, содержащих правила и методы исследований (испытаний) и измерений, в том числе правила отбора образцов, необходимые для применения и исполнения требований технического регламента Таможенного союза "О безопасности оборудования, работающего под избыточным давлением" (ТР ТС 032/2013) и осуществления оценки соответствия объектов технического регулирования
Status: Effective
Choose Language:
Format: Electronic (pdf/doc)
Approved: EEC Board,
6/11/2019
SKU: RUSS433982
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Decisions, regulations and lists (to 032/2013 TR CU) »
The Document References:
Code: Customs Code of the Eurasian Economic Union
Code: Customs Code of the Customs Union
Decision 22: On ensuring the functioning of a single market of services in the field of construction
Decision 98: About the Regulation of the Eurasian Economic Commission
GOST 10037-83: Autoclaves for building industry
GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications
GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw
GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions
GOST 11881-76: Controllers acting without
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 12.2.054-81: Acetylene installations
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.2.085-2017: Pipeline valves. Safety valves. Selection and calculation of capacity
GOST 12.2.096-83: Standard system of labour safety. Steam boilers with pressure up to 0.07 MPa. Safety requirements
GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 13372-78: Vessels and apparatus. Series of nominal volumes
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 14106-80: Curing autoclaves
GOST 14114-85: Vessels attaching rigs. Erection lugs. Design and dimensions
GOST 14115-85: Vessels attaching rigs. Oblong erection lugs. Design and dimensions
GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15518-87: Lamellar heat exchangers
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 16769-84: Hydraulic accumulators
GOST 16860-88: Thermal deaerators. Types, basic parameters, acceptance, control methods
GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications
GOST 17314-81: Devices for fastening thermal insulation of steel vessels and equipment. Design and dimensions. Technical requirements
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods
GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications
GOST 21563-2016: Hot-water boilers. General technical requirements
GOST 21804-94: Shut-Off Devices for Cylinders With Liquefied Hydrocarbon Gases With Pressure Up To 1.6 Mpa
GOST 22373-82: Butterfly and ball valves for hydraulic turbines
GOST 22530-77: Stationary steam exhaust and power technological boilers. Types and basic parameters
GOST 23172-78: Steam and hot-water stationary boilers. Terms and definitions
GOST 23479-79: Non-destructive testing. Optic methods. General requirements
GOST 23866-87: Single-seated, double-seated and cellular
GOST 24000-97: Agitated enamelled vessels. Types, basic parameters and dimensions
GOST 24005-80: Stationary natural-circulation steam boilers
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24569-81: Occupational safety standards system. Steam and hot-water boilers. Marking
GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements
GOST 24755-89: Vessels and apparatus. Norms and methods of strength calculation for openings reinforcement
GOST 24756-81: Vessels and apparatus. Norms and methods of strength calculation. Rated strength calculation of column-type apparatus from wind loads and seismic impact
GOST 24757-81: Vessels and apparatus. Apparatus of column type. Norms and methods of strength calculations
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST 25005-94: Refrigerating equipment
GOST 25215-82: High-pressure vessels and apparatus. Shells and heads. Norms and methods of strength calculation
GOST 25221-82: Vessels and apparatuses. Spherical non-sided heads and bottoms. Norms and methods of strength calculation
GOST 25365-82: Steam and hot-water boilers
GOST 25449-82: Water and steam heat exchangers. Types, basic parameters and sizes
GOST 25450-82: Surface regenerative heaters. Types, basic parameters and dimensions
GOST 25720-83: Heat water boilers. Terms and definitions
GOST 25756-83: Bellows expansion joints and (bellows) seals. Terms and definitions
GOST 25822-83: Vessels and apparatuses. Air cooled heat exchangers. Norms and methods of strength calculation
GOST 25859-83: Steel vessels and apparatuses. Norms and methods of fatigue strength calculation under low-cyclic loads
GOST 25867-83: Vessels and apparatuses. Jacketed vessels. Norms and methods of strength calculation
GOST 26158-84: Vessels and apparatus of non-ferrous metals. Norms and methods of strength calculation. General requirements
GOST 26159-84: Cast iron vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 26202-84: Vessels and devices (standards and methods of design calculations of strength for shells and bottoms under supporting loads)
GOST 26296-84: Overhung supports of suspended vertical vessels and apparatus. Basic dimensions
GOST 26303-84: High-pressure vessels and apparatus. Threaded studs. Methods of strength calculation
GOST 26496-85: Hydraulic accumulators. Acceptance rules and test methods
GOST 27036-86: Bellows metal expansion joints and seals
GOST 27590-2005: House-tube water-watered heat supply systems. General specifications
GOST 28193-89: Natural-circulation stationary steam boilers with steam capacity of less than 4 ton / hour
GOST 28269-89: High-power stationary steam boilers
GOST 28289-89: Reverse pipe fittings for thermal power-stations. Types and main parameters
GOST 28291-89: Stop valves for thermal power-stations. Types and main parameters
GOST 28308-89: Gate-type shut-off valves for steam electric stations. Types and main parameters
GOST 28343-89: Flanged steel ball valves
GOST 28679-90: Steam-water heaters for heat supply systems
GOST 28697-90: Programme and test methods of bellows compensators and seals. General requirements
GOST 28759.1-90: Flanges of vessels and apparatus. Types and parameters
GOST 28759.2-90: Steel flat welded flanges of vessels and apparatus. Design and dimensions
GOST 28759.3-90: Steel butt welded flanges of vessels and apparatus. Design and dimensions
GOST 28759.4-90: Steel butt welded flanges of vessels and apparatus for gaskets of octangular sections. Design and dimensions
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 28912-91: Filters for stores and filters-separators. Technical specifications
GOST 30735-2001: Heating hot-water boilers with capacity from 0,1 to 4,0 MW. General specifications
GOST 30780-2002: Steel vessels and apparatus. Bellows-type expansion joints. Strength calculation methods
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31314.3-2006: Series 1 freight containers. Technical requirements and test methods. Part 3. Tank containers for liquids, gases and pressurized dry bulk
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST 31838-2012: Columns. Technical requirements
GOST 31842-2012: Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 32388-2013: Process piping. Standard for the stress, vibration and seismic analysis
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 33855-2016: Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
GOST 33856-2016: Pipe fittings. Fire Test Method
GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements
GOST 33960-2016: Steam and hot-water stationary boilers. Steel structures. Load norms for supporting steel structures
GOST 33962-2016: Stationary water-tube boilers. General. Materials and stress allowances for the boiler pressure parts
GOST 33963-2016: Stationary boilers. Calculation for earthquake and wind nfluence
GOST 33964-2016: Stationary water-tube boilers. Verification calculation. Static strength calculation. Cyclical strength calculation. Brittle-structure resistance calculation
GOST 33965-2016: Stationary water-tube boilers. Calculation for the component basic dimensions selection. Strength factors and hole reinforcement
GOST 33986-2016: Automotive vehicles. High-pressure cylinders for compressed natural gas used as motor fuel. Technical requirements and test methods
GOST 34233.10-2017: Vessels and apparatus. Norms and methods of strength calculation. Vessels and apparatus working with hydrogen sulfide media
GOST 34233.11-2017: Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 34233.12-2017: Vessels and apparatus. Norms and methods of strength calculation. Requirements for the form of submission of strength calculations performed on a computer
GOST 34233.2-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
GOST 34233.3-2017: Vessels and apparatus. Norms and methods of strength calculation. Strengthening the holes in the shells and bottoms at internal and external pressures. Calculation of the strength of the shells and the bottoms with external static loads on the fitting
GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections
GOST 34233.5-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and bottoms from the impact of supporting loads
GOST 34233.6-2017: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation with low-cycle loads
GOST 34233.7-2017: Vessels and apparatus. Norms and methods of strength calculation. Heat exchangers
GOST 34233.8-2017: Vessels and apparatus. Norms and methods of strength calculation. Shirts and apparatus
GOST 34233.9-2017: Vessels and apparatus. Norms and methods of strength calculation. Column type apparatus
GOST 34283-2017: Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 3619-89: Stationary steam boilers
GOST 4666-2015: Pipeline accessories. Requirements for marking
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8339-84: Oil pressure installations for hydraulic turbines
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9493-80: Vessels and apparatus. Pressure ratings
GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications
GOST 9544-2015: Pipeline valves. Leakage rates of valves
GOST 9617-76: Vessels and apparatus. Series of diameters.
GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)
GOST 9931-85: The cylindrical shells of the steel welded vessels and apparatus. Types, main characteristics and dimensions
GOST ISO 11439-2014: Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications
GOST ISO 13706-2011: Air-cooled apparatus. General technical requirements
GOST ISO 15547-1-2016: The oil, petrochemical and gas industries. Plate-type heat exchangers. Part 1. Plate and frame heat exchangers
GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating
GOST R 50671-94: Metal bellows expansion joints for the pipelines of electric power stations and heat-supply systems. Types, basic parameters and general technical requirements
GOST R 51127-98: Liquid filters periodic action, working under pressure. Safety requirements and test methods
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements
GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications
GOST R 51936-2002: Pressure chambers. Classification
GOST R 52264-2004: Pressure diving chambers. General specifications
GOST R 53258-2009: Fire equipment. The small size cylinders for apparatuses breathing and self-contained escape with compressed air. General technical requirements. Test methods
GOST R 53674-2009: Pipeline valves. Nomenclature of characteristics. Check-lists for design and order
GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54487-2011: Non-destructive testing. Evaluation of gas porosity in aluminium casting alloys by ultrasound. General requirements
GOST R 54522-2011: High pressure vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical shells, heads, flanges, covers. Design recommendations
GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications
GOST R 54790-2011: Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Part 3. Externally loaded tests
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54974-2012: Stationary steam and hot-water boilers and heat recovery steam generators. Terms and definitions
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55170-2012: Steam and hot-water stationary boilers, heat recovery steam generators. Marking
GOST R 55171-2012: Stationary steam and hot-water boilers and heat recovery steam generators. Weld joints. Quality control. General requirements
GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics
GOST R 55559-2013: Composite cylinders for liquefied petroleum gases at pressure up to 2,0 MPa. General technical requirements. Test methods
GOST R 55596-2013: District heating systems. Standard for the stress and seismic analysis
GOST R 55597-2013: High pressure vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads external pressure. Strength calculation under external static loads on the nozzle
GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements
GOST R 55600-2013: Pipes and pipeline components for pressure over 100 to 320 MPa. Norms and methods of strength calculation
GOST R 55603-2013: Heat recovery steam generators of combined cycle plants. Types and basic parameters
GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods
GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications
GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements
GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications
GOST R EN 13018-2014: Visual testing. General principles
GOST R ISO 15547-1-2009: Petroleum and natural gas industries. Plate-type heat exchangers. Technical requirements
GOST R ISO 15549-2009: Non-destructive testing. Eddy current testing. Basic principles
GOST R ISO 17637-2014: Non-destructive testing of welds. Visual testing of fusion-welded joints
GOST R ISO 17641-1-2011: Destructive tests on welds in metallic materials. Hot cracking tests for weld. Arc welding processes. Part 1. General
GOST R ISO 17642-1-2011: Destructive tests on welds in metallic materials. Cold cracking tests for welds. Arc welding processes. Part 1. General
GOST R ISO 3452-1-2011: Non-destructive testing. Penetrant testing. Part 1. General principles
GOST R ISO 3452-4-2011: Non-destructive testing. Penetrant testing. Part 4. Equipment
GOST R ISO 9934-2-2011: Non-destructive testing. Magnetic particle testing. Part 2. Detection media
ST RK 1357-2005: Pressure vessels. Basic design requirements
ST RK 1358-2005: Pressure vessels. Requirements for welding steels
ST RK EN 10216-1-2015: Seamless steel pipes for pressure purposes. Technical delivery terms. Part 1. Non-alloy steel pipes with specified room temperature properties
ST RK EN 10216-2-2015: Seamless steel pipes for pressure technical conditions of delivery. Part 2. Pipes of unalloyed and alloyed steel with specified properties for elevated temperature
ST RK EN 10216-3-2015: Seamless steel pipes for pressure technical conditions of delivery. Part 3. Alloy fine grain steel pipes
ST RK EN 10216-4-2015: Seamless steel pipes for pressure technical conditions of delivery. Part 4. Pipes of unalloyed and alloyed steel with special properties for low temperature
ST RK EN 10216-5-2015: Seamless steel pipes for pressure technical conditions of delivery. Part 5. Stainless steel pipes
ST RK EN 10217-1-2015: Welded steel pipes for pressure purposes. Technical delivery conditions. Part 1. Non-alloy steel pipes with specified properties for room temperature
ST RK EN 10217-2-2015: Welded steel pipes for pressure purposes technical delivery conditions. Part 2. Electric welded pipes made of unalloyed and alloyed steel with specified properties for elevated temperature.
ST RK EN 10217-3-2015: Welded steel pipes for pressure purposes technical delivery conditions. Part 3. Pipes of alloyed fine-grained structural steel
ST RK EN 10217-4-2015: Welded steel pipes for pressure work technical delivery conditions. Part 4. Welded non-alloy steel pipes with specified properties for reduced temperature.
ST RK EN 10217-5-2015: Welded steel pipes for pressure purposes technical delivery conditions. Part 5. Non-alloyed and alloy steel pipes, produced by submerged arc welding, with specified properties for elevated temperature
ST RK EN 10217-6-2015: Welded steel pipes for pressure purposes technical delivery conditions. Part 6. Submerged arc welded non-alloy steel pipes with specified low temperature properties
ST RK EN 13480-1-2012: Industrial metallic pipelines. Part 1. General provisions
ST RK EN 13480-2-2013: Industrial metal pipelines. Part 2. Materials
ST RK EN 13480-3-2013: Industrial metal pipelines. Part 3. Design and calculation
ST RK EN 13480-4-2016: Industrial metal pipelines. Part 4. Fabrication and installation
ST RK EN 13480-5-2016: Industrial metal pipelines. Part 5. Control and testing
ST RK EN 13480-6-2016: Industrial metal pipelines. Part 6. Additional requirements for underground pipelines
ST RK EN 13480-7-2016: Industrial metal pipelines. Part 7. Conformity assessment procedure manual
ST RK EN 1708-1-2016: Welding. Elements of steel welded joints. Part 1. Pressure structures
ST RK ISO 17638-2013: Non-destructive testing of welded connections. Magnetic method
ST RK ISO 17640-2013: Non-destructive testing of welded connections. Ultrasonic examination. Methods, control levels, and evaluation
ST RK ISO 9934-2-2017: Non-destructive testing. Magnetic particle control. Part 2. Materials for flaw detection
STB 1172-99: Non-destructive testing. Control with penetrating (capillary) substances. General provisions
STB 1428-2003: Non-destructive testing. Welded connections of pipes and steel structures. Radiographic method
STB EN 13480-1-2005: Industrial metal pipelines. Part 1. Basic provisions
STB EN 13480-2-2005: Industrial metal pipelines. Part 2. Materials
STB EN 13480-3-2005: Industrial metal pipelines. Part 3. Design and calculation
STB EN 13480-4-2005: Industrial metal pipelines. Part 4. Manufacturing and assembly
STB EN 13480-5-2005: Industrial metal pipelines. Part 5. Tests and control
STB EN 286-1-2004: Pressure vessels for air or nitrogen. Part 1. Pressure vessels for general use.
STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications
The Document is Referenced By:
Decision 22: On ensuring the functioning of a single market of services in the field of construction
Order 444: On the main freelance specialists of the Ministry of Health of the Russian Federation
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.