Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments
Административный регламент по предоставлению Федеральным агентством по техническому регулированию и метрологии государственной услуги по утверждению типа стандартных образцов или типа средств измерений
Status: Not valid - Replaced. The order that approved the Administrative Regulations became invalid in accordance with the order of the Ministry of Industry and Trade of Russia dated January 17, 2019 No. 58
Registered with the Ministry of Justice of the Russian Federation on 12 September 2013. Registration No. 29940
Зарегистрировано в Минюсте РФ 12 сентября 2013 г. Регистрационный № 29940
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Industry and Trade of Russia,
6/25/2013
SKU: RUSS435050
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulatory documents »
Examination, state supervision »
Construction (Max) »
Regulatory documents »
Agreements (contracts), agreements, tenders »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Committee of Russian Federation for Standardization, Metrology and Certification »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
PromExpert »
SECTION I. TECHNICAL REGULATION »
I Basics of technical regulation »
1 The main provisions of technical regulation »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.120 Standardization. General rules »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.080 Services »
03.080.01 General services »
The Document References:
Code 117-FZ: Tax Code of the Russian Federation (Part Two)
Decree 294: Regulations on the Federal Agency for Technical Regulation and Metrology
Federal Law 181-FZ: Fundamentals of Occupational Safety and Health in the Russian Federation
Federal Law 210-FZ: On the basics of tariff regulation of utilities
Federal Law 59-FZ: On the procedure for considering applications from citizens of the Russian Federation
Resolution 236: Requirements for the provision in electronic form of state and municipal services
Resolution 352: Regulations on the System of State Accounting and Control of Nuclear Materials
Resolution 840: Rules for filing and considering complaints against decisions and actions (inaction) of federal executive authorities and their officials, federal civil servants, officials of state non-budgetary funds of the Russian Federation, state corporations empowered in accordance with federal laws to provide state services in the established sphere of activity, and their officials, organizations envisaged by part 1.1 of article 16 of the Federal Law "On Organization of Provision of State Services".
The Document is Referenced By:
GOST 10181-2000: Concrete Mixtures Test method
GOST 11310-90: Asbestos cement pipes and couplings. Methods of test
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15.311-90: System of product development and launching into manufacture. Launching of products under foreign companies technical documents
GOST 16297-80: Sound insulation and sound absorption materials. Methods of testing
GOST 20054-82: Concrete non-pressure pipes. Specifications
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 24545-81: Concretes. Methods of fatigue tests
GOST 28723-90: Velocity, electromagnetic and vortex flow meters
GOST 28724-90: Speed gas meters
GOST 30062-93: Bar reinforcement for reinforced concrete structures
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 7619.0-81: Fluorite. Methods of chemical analysis. General requirements
GOST 8.647-2015: State system for ensuring the uniformity of measurements. Wagon scales, automatic. Part 1. Metrological and Technical specifications. Methods of tests
GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis
GOST 8747-88: Asbestos-cement sheet products. Test methods
GOST R 51795-2001: Cements. Methods for determination of content of mineral additives
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 55369-2012: Railway automatics and telemechanics equipment. General technical requirements
GOST R 55435-2013: Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles
GOST R 58274-2018: Space systems. Metrological provision of technological preparation of production. Main provisions
GOST R 8.609-2018: State system for ensuring uniformity of measurements. Standard samples of the system of state accounting and control of nuclear materials. Main provisions
GOST R 8.883-2015: State system for ensuring the uniformity of measurements. Software of measuring instruments. Algorithms of processing, storage, protection and transmission of measuring information. Test methods
GOST R 8.903-2015: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements
GOST R 8.908-2015: State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers
GOST R 8.920-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Nitrogen oxide, Nitrogen dioxide, Hydrogen sulfide, Sulfur dioxide, Ammonia. Procedure of determining the metrological characteristics
GOST R 8.921-2016: State system for ensuring the uniformity of measurements. Certified reference materials of natural gas magistral and substitute natural gas. Procedure of determining the metrological characteristics
GOST R 8.925-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics
GOST R 8.926-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with halocarbons. Procedure of determining the metrological characteristics
ITS 22.1-2016: General principles of industrial environmental control and its metrological support
MI 2999-2018: State system for ensuring uniformity of measurements. Systems automated information-measuring commercial accounting of electric energy. Recommendations for writing a type description
MI 3290-2010: State system for ensuring uniformity of measurements. Recommendation on the preparation, execution and review of test materials of measuring instruments for type approval
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
Order 135: On approval of the mandatory submission of information by the Federal Customs Service for inclusion in the segment in the field of coal industry, shale industry, peat industry of the state information system of the fuel and energy complex and requirements for filling out these forms
Order 2614: Form of the checklist (list of control questions) used by the officials of the Federal Agency on Technical Regulation and Metrology and its interregional territorial administrations during scheduled inspections within the framework of the Federal State Metrological Supervision
Order 317: Establishing a Black Sea Shrimp Fisheries Restriction in the Black Sea in 2018
R 50.2.052-2006: State system for provision of uniformity of measurements. Procedure of validation of crude oil and oil gas output measuring devices conformity to metrological and technical requirements of GOST R 8.615-2005' State system for provision of uniformity of mea
RD 52.18.289-90: Guidelines. Methods for measuring the mass fraction of mobile forms of metals (copper, lead, zinc, nickel, cadmium, cobalt, chromium, manganese) in soil samples by atomic absorption analysis. NGO "Typhoon"
RD 52.18.761-2018: Network measuring instruments for hydrometeorological purposes. General technical requirements
SP 11-105-97: Engineering and geological survey for construction
SP 11-109-98: Prospecting for soil building materials
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
