GOST R 70463-2022
ГОСТ Р 70463-2022
|
|
Four- and six-axle flatcars. General specifications
Вагоны-платформы четырех- и шестиосные. Общие технические условия
Status: Status information is available in the commercial version of NormaCS 05/01/2023
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rosstandart,
12/2/2022
SKU: RUSS436024
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.20 Trailer »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.20 Trailer »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 15.101-98: System of product development and launching into manufacture. Procedure of scientific researches and development
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15.902-2014: System of development and launching into manufacture. Railway rolling stock. Procedure of development and launching into manufacture
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 2.602-2013: Unified system for design documentation. Repair documents
GOST 20527-82: Angle fittings for gross weight freight containers. Design and dimensions
GOST 21447-75: Coupler contour line. Dimensions
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 25.101-83: Strength calculation and testing. Representation of random loading of machine elements and structures and statistical evaluation of results
GOST 25.502-79: Methods of mechanical testing of metals
GOST 2593-2014: Hose connections for railway rolling stock. Specifications.
GOST 26358-84: Pig iron castings
GOST 26686-2022: Flatcars. General specifications
GOST 26686-96: Flat car backtone railroad bore 1520 mm gauge. General technical specifications
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 32700-2020: Railway rolling stock. Adhesion control methods
GOST 32880-2014: Parking brake of the rolling-stock. Specifications
GOST 32894-2014: Railway application. Inspection control. General provisions
GOST 32913-2014: Draft gears of coupler and automatic coupler devices of railway rolling stock. Technical specifications and acceptance rules
GOST 33211-2014: Freight cars. Requirements for strength and dynamic properties
GOST 33434-2015: Coupler and automatic coupler device of railway rolling stock. Technical requirements and acceptance rules
GOST 33463.7-2015: Life support systems on railway rolling stock. Part 7. Test methods for determination of ergonomic parameters
GOST 33788-2016: Freight and passenger coaches. Test methods for strength and dynamic quality
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34434-2018: Brake systems for freight railcars. Technical requirements and calculation rules
GOST 34632-2020: Freight cars. Reliability Performance Test Method
GOST 3475-81: Automatic coupler equipment of railway rolling stock for railway track gauge 1520 (1524) mm. Assembling dimensions
GOST 34759-2021: Railway rolling stock. Norms for permissible exposure of railway track and test methods
GOST 380-2005: Common quality carbon steel. Grades
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8026-92: Levelling rules. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9238-2013: Construction and rolling stock clearance diagrams
GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 977-88: Steel castings. General specifications
GOST OIML R 76-1-2011: State system for ensuring the uniformity of measurements. Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 2.601-2019: Unified system of design documentation. Operational documents
GOST R 2.610-2019: Unified system of design documentation. Rules for the implementation of operational documents
GOST R 50779.12-2021: Statistical methods. Statistical quality control. Methods for random sampling of piece products
GOST R 51891-2008: Series 1 freight containers. Fittings. Specifications
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53350-2009: Series 1 freight containers. Classification, dimensions and ratings
GOST R 70464-2022: Three-axle axle suspension bogies for freight wagons. General specifications
GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
OK 001-2021: (ISO ISS) All-Russian Classification of Standards
OK 005-93: All-Russia Classification of Products (Part 1)
OK 005-93: All-Russia Product Classification (OKP) (Part 13)
OK 005-93: All-Russia Classification of Products (OKP)
OK 005-93: All-Russia Classification of Products (Part 17)
OK 005-93: All-Russia Product Classification (OKP) (Part 3)
OK 005-93: All-Russia Classification of Products (OKP) (Part 4)
OK 005-93: All-Russia Classification of Products (Part 5)
OK 005-93: All-Russia Classification of Products (Part 6)
OK 005-93: All-Russia Product Classification (OKP) (Part 7)
OK 005-93: All-Russia Classification of Products (OKP) (Part 8)
OK 005-93: All-Russia Classification of Products (part 9)
OK 005-93: All-Russia Classification of Products (OKP) (Part 10)
OK 005-93: All-Russia Classification of Products (Part 11)
OK 005-93: All-Russia Classification of Products (part 12)
OK 005-93: All-Russia Classification of Products (OKP) (Part 14)
OK 005-93: All-Russia Classification of Products (part 15)
OK 005-93: All-Russia Classification of Products (Part 16)
OK 005-93: All-Russia Classification of Products (Part 17)
OK 005-93: All-Russia Classification of Products (Part 18)
OK 005-93: All-Russia Classification of Products (Part 19)
OK 005-93: All-Russia Classification of Products (Part 18)
OK 005-93: All-Russia Classification of Products (Part 21)
OK 005-93: All-Russia Classification of Products (OKP) (Part 22)
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.