GOST 801-2022
ГОСТ 801-2022
|
|
Rolled bearing steel. Technical conditions
Прокат из подшипниковой стали. Технические условия
Status: Status information is available in the commercial version of NormaCS 08/01/2023
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rosstandart,
12/27/2022
SKU: RUSS436216
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V32 Rolled and shaped steel »
As a Replacement Of:
GOST 801-78: Bearing steel. Specifications
The Document References:
GOST 1.0-2015: Interstate system for standardization. Basic principles
GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 103-2006: Hot-rolled steel strips. Dimensions
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12503-75: Steel Methods of ultrasonic control. General requirements
GOST 14955-77: Quality round steel with a special surface finish
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 21014-2022: Metal products made of steel and alloys. Surface defects. Terms and definitions
GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 2591-2006: Square hot-rolled steel bars. Dimensions
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 33439-2015: Metal products, ferrous metals and alloys on iron-nickel and nickel-based. Heat treatment terms and definitions
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 5657-69: Steel. Methods for the determination of hardenability
GOST 7417-75: Calibrated round steel
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 801-78: Bearing steel. Specifications
GOST 8817-82: Metals. Upsetting test method
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 56542-2019: Non-destructive testing. Classification of types and methods
GOST R 58228-2018: Continuous cast steel billet. Testing and assessment methods of the macrostructure
GOST R 58765-2019: Metal products from steel and alloys. Terms and Definitions
GOST R ISO 10280-2010: Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method
GOST R ISO 14284-2009: Steel and iron. Sampling and preparation of samples for determination of chemical composition
GOST R ISO 15549-2009: Non-destructive testing. Eddy current testing. Basic principles
GOST R ISO 4940-2010: Steel and iron. Determination of nickel content. Flame atomic absorption spectrometric method
GOST R ISO 4943-2010: Steel and iron. Determination of copper content. Flame atomic absorption spectrometric method
GOST R ISO 4967-2015: Steel. Determination of content of non-metallic inclusions. Micrographic method using standard diagrams
The Document is Referenced By:
GOST R 70817-2023: Steel and alloys. Names and basic designations of grades
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.